Smart touch not working

I have hp envy touchsmart and my smart touch was working fine when I had windows 8. When I upgraded to windows 8.1 my smart touch stopped working I cannot use touc to scroll and use smart touch features it just relocates the coursor. I recently upgraded to windows 10 and it is still not working.

same... please help!

Similar Messages

  • Connecting my iphone to wall charger makes my iphone touch not work properly

    I have a iphone 3g and a orignal apple wall charger when i connect my iphone to charger it makes my iphone touch not work properly, but it charges the phone properly.the data cable is also working properly. So can any one help me out here.thanks

    Holy smokes, I thought I was losing my mind, but that's the exact same thing that's started happening to me since this whole 4.3.1 "upgrade" disaster started - hooking it up to the wall charger overnight, wake up in the morning and it's a brick requiring multiple attempts to restart.
    It's also randomly and spontaneously crashing - it'll be on the table or couch beside me, I'll catch movement out of the corner of my eye and look over and see a silver apple.

  • Nokia Lumia 720 Touch not working even after repla...

    Hi ,
    I had bought lumia 720 on 31/05/2013 , but on 28/12/2013 the touch was not working or the touch was working on its own. Since my phone was in warranty then, they replaced the touch free of cost. But again from 20/08/2014 my phone is having the same problem, touch not working. When i showed it to Nokia care, they told that again they need to replace the touch , it will cost around Rs. 7950 (since my phone was out of warranty this time)... My question is, within 1 year 2 months , twice the touch pad has problem. What kind of phone it is .... Please think before buying Nokia touch phones, I think still they are far behind in touch screen technology ( no offense :-)  )....
    Not only me, one of my friend also facing same problem with Lumia 720 ....

    Not beeing familiar with other countries consumer laws and consumer rights, I can only speak for my self and Norway. But as far as I'm concerned I would have expected extended rights for the new parts and the labour. - If however the fault can relate to the parts involved with the mentioned replacement.
    But if this is not possible in your country, there isn't much to do other than repair it for pay or leave it.

  • Is there a fix to touch not working? All updates are done. Intermittent problem

    Is there a fix to touch not working? All updates are done. Intermittent problem

    Do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
    If that does not help, take it to an Apple store genius bar and have the techs check it out to make sure there is not a hardware issue.

  • HT1351 Now update v.ios7.1 my iphone 4s..after update with itunes look have something about assistive touch not work

    After to update ios7.1 have something it wrong.assistive touch not working some before

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • HT4623 i cann't reset my iphone the phone speaks arabic touch not working properly

    i cann't reset my iphone the phone speaks arabic touch not working properly

    Triple tap the home button to turn off VoiceOver.

  • Smart playlists not working on my ipod touch?

    my smart playlists (such as top 25 most played, recently added etc) are not working on my ipod touch 3rd gen 64gb. they are syncing the correct info on my other ipod nano, but on my ipod touch they are coming up with different songs. this is very annoying!!! please someone help me?
    does anyone else have this problem?

    same... please help!

  • 1st Gen iPod touch not working correctly?

    I have a 1st generation 8GB iPod Touch. It's not working correctly.
    My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
    http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
    (Highlight the image to see it better.)
    This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
    But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
    I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
    My iPod is less than a year old. Can you help?

    Vipershark,
    I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
    The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
    Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
    Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
    Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

  • Home button on ipod touch not working!!! how can i fix it? no warranty!!!!

    my ipod touch home button is not working everything on the ipod works fine but the home button. i have to turn off the ipod and then turn it back on as a substitute fix. has anyone else had this problem? if you have any ideas or know how to fix it please help!!!! I've read that if i put a drop of alcohol or acetone on the home button it should fix the problem but im affraid of adding liquid to it and it stop working all together.

    You can continue using the iPod without the home button:
    Hardware Defect: Home or Power Button
    (Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

  • New iPod Touch not working with G3 iMac

    I got a new iPod Touch (4 gig) for Christmas. Tried plugging it into my iMac Power PC G3, and I get an error message. ( error OxE000001). Is my iMac too old to work with the iPod touch?
    Also as a second issue, I have a wireless network, but I don't have it broadcasting it's name for security. When I turn on my lap top, if it doesn't automatically find the wifi network, I just type in the network name, and it pops up.
    Any way to do this with the iPod Touch? (Type in the network name, even though it's not broadcast)
    I'll also list this question on the WIFI section.

    Ken;
    I AM running with iTunes 9.0.2. in my slot loading G3 iMac. There is no special Hack.
    You tried to help me earlier, when my G3 just would not work after I upgraded Safari and iTunes. I ended going to the Genius bar, where they worked on it for hours to get it going again. They installed earlier versions of both programs.
    I was going to keep it that way, until I was given an iTouch for Christmas. The iMac just did not see it. I was resigned to updating my iTouch through my son's iBook.
    In a question I had about upgrading my wireless network, John Galt said his 500mhz G3 worked OK with the iTouch. Over two weeks I slowly installed what he had, (or close to it) I think Safari has a G3 version, that I may have missed when you were helping me.
    The last thing I upgraded was iTunes 9.0.2. After three or four tries, and plugging in the iTouch USB cable directly into the iMac, the iTouch was recognized! It seems to work fine over the past week or so.
    Some odd things I have to live with. When I plug in the iTouch, iPhoto will start and ask about downloading pictures from the iTouch. I have to manually start iTunes if it is not already on. It does not automatically start like it does with my iPod nano.
    Also I did not realize how slow this machine is, I thought down loading a CD through a La Cie DVD/CD player at 1.3x speed was fast. My son's iBook downloads a CD a 9 x speed! Oh well... slow but steady.....

  • IPOD TOUCH NOT WORKING WITH ITUNES

    I am using:
    iPod Touch 16GB 1.1.4 (With $25 Software Upgrade)
    Windows Vista Premium Edition
    iTunes 7.6.2
    Whenever I connect my iPod, the device connect sound is made and it shows up in the my computer window, but it will not show up or sync with iTunes.
    I HAVE ALREADY TRIED THE FOLLOWING:
    Reseting the computer
    Reseting the iPod
    Using a different USB port
    Using a different cable
    Erasing ALL of the iPod's contents (Yes I lost my $25 update as well)
    Restarting the "APPLE MOBILE DEVICE SUPPORT" in the "systems" application
    ...As well as many other things, all with absolutely NO results.
    I have tried to manage my ipod through other programs, nothing seems to work. I connected the iPod to a different computer and everything worked fine.
    I ASSUME the problem has something to do with the iPod Touch's drivers; for whatever reason they might be corrupted or installed incorrectly, thus preventing the iPod from automatically reinstalling them as well as preventing the possibility of syncing.
    My question is, how can I reinstall the drivers without having the iPod touch do it automatically?
    Any help would be much appreciated, thanks.

    I fixed the problem myself.
    If anyone else has this same problem and is looking to fix it, here is what I did.
    I found this on another site:
    "Okay well I spent about an hour on the phone with Apple trying to fix this problem. The guy I talked to seemed to have delt with this problem before. He tould me that Apple was getting numerous calls about the iPod touch not connecting with iTunes. So here is the solution that worked for me.
    The first thing you must do it uninstall iTunes and Quicktime using the controll pannel, add/remove hardware, on your windows computer. Once you have uninstalled both of thoes programes go ahead and look for anything else that is Apple and uninstall them as well. There should be an Apple updater or driver that is very critical to uninstall, this was the cause of iTunes not recognizing the new iPod Touch. Next make shure you have the very latest update for Windows on your computer, you can check this on Microsofts web page. Finnaly once you are shure you have UNINSTALLED EVERYTHING that says Apple, iTunes, or Quick time restart your computer and MAKE SHURE THAT YOUR IPOD IS NOT CONNECTED TO YOUR COMPUTER. Then download the newest version of iTunes and install it. Once the installation is complete go ahead and connect the iPod Touch and everything should work.
    I am not shure if this will work for everyone but in my situation it worked. I hope it helps some of you out there!!"
    That worked like a ******* charm. Hope this helps.

  • IPod touch not working through USB in car

    Does anyone know how to resolve an issue with the new IPod Touch 4th gen just purchased not working through car stereo. Have a new Toyota camry touring. You can hear sound when connected when you slide to unlock or go into an app the sound goes through the speakers fine but the radio face says loading and won't go any further, if you then try to go to the music screen it says connected so you can't get into the music to try to play. Has anyone else had this problem and resolved it. Not sure if the software of the radio can be upgraded to suit maybe at service?? Not really sure. Any help would be great

    Have you contacted your auto dealer? Some users have reported problems with there car systems not worked with the latest iOS. I searched the iPod Touch forum for Toyota but did not find any previous posts concerning Toyota.
    Have you tried resetting your iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • Smart feed not working correctly

    hello,
    the smart feed are not working correctly in this course page :
    https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
    Modified=01ca6e794f33e660
    I don't understand why...

    C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
    It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

  • Smart Sharpen not Working in CC 2014

    Recently I upgraded from CC to CC 2014.  Since then I can't get Smart Sharpen to work.  Lens and motion blur don't work at all.  Sometimes when I choose Gaussian blur it works other times not.
    It's not just me, a friend who has it installed on two computers can't make it work either.
    Any ideas?

    In order to preview .php pages locally, you need a local testing server (Wamp, Xampp, Mamp).  Is yours properly defined in DW CC?  See screenshots.
    Nancy O.

  • Smart Actions not working properly after software update

    My Razr updated 2 days ago and since then my Smart Actions are not working properly. 
    I have my Work action set to turn the volume down when I'm at a certain GPS.  It shows that "Work" is active, but doesn't turn the volume down.
    Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone.  I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again. 
    Any help appreciated.

        Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again?  Are your other GPS services working as normal?  After the hard reset performed in the store did you install all of the same application that you had before?
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

Maybe you are looking for