Smart Tunnel not working correctly

I have setup Smart Tunnelling on an ASA5505.
Situation is PC ---> Proxy [bluecoat] ---> Internet ---> ASA
I can connect to the front end clientless VPN side ok and I then click on start smart tunnelling. It starts up (at least it says so) but when I access one of the programs in the list (mstsc.exe) the [Tunnel] traffic does not go via the Proxy but tries to go direct instead. Wireshark shows traffic being sent to the ASA VPN IP instead of via the proxy (trace is filtered to ASA subnet). Although encrypted the trace only shows traffic when I start a connection from mstsc.exe.
ASA version is 8.4(3), Java is build 1.6.0_26-b03
Any tips on what maybe going on?

Automatic proxy setting or manual? Manual is supported.

Similar Messages

Smart feed not working correctly

hello,
the smart feed are not working correctly in this course page :
https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
Modified=01ca6e794f33e660
I don't understand why...

C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

Hyperion Workforce Smart list not working correctly

We are customizing the Employee Type Smart list and added few more enties to it. But in the Web form when tried to select an entry its is showing the Label values and not the Name for newly added entries but the original options are working correctly. e.g.
Name Value
Regular LABEL_REGULAR
Contractor LABEL_CONTRACTOR
Temporary LABEL_TEMPORARY
Board LABEL_BOARD
EBA LABEL_EBA..
now in the form drop down I get values as below,
Regular
Contractor
Temporary
LABEL_BOARD
LABEL_EBA
Not sure why its working wierd for new entries. Version is 11.2.2

Are smartlists assigned to members?

Some smart playlists not working correctly

I have a smart playlist, "100 Most Played" that contains, as you might infer, the 100 most played songs (according to play count). On the iPhone, this seems to come out as 100 random songs because it does not correspond to the playlist as it appears in iTunes.
iPhone 8GB

agreed. i'm having the same problem, and am also surprised by it.
DOESN'T WORK:
"Top 25" - should be easy. all the songs that the iPhone needs for this smart playlist are, yes, synced to the iPhone. but it picks a set of songs that have nothing in common as far as i can see (they have different ratings and add dates and so on).
WORK CORRECTLY:
"80s/Good" - an alphabetical list of songs with the genre "80s". this works and appears in the right order.
"New" - shows new additions to iTunes, sorted by date added. works correctly.
WEIRDEST:
"Forgotten/Best" - is a playlist for showing 5-star songs not played recently. has always worked on iTunes. oddly, on the iPhone, the song list is actually the song list for the "Top 25" ?!?!!? i mean, it -is- the Top 25 playlist, but with the wrong name somehow. it's very confusing.
waiting for a software update =)

Smart folder not working correctly

Hi @all,
I've created a search back when I was using Mountain Lion to copy my Photostream Pictures in specific folder. So I navigated to ~/library/application support/iLifeassetmanagement/assets/sub created and saved a search which will find all files from type "images". For easier access to the folder/search I've put it into my sidebar.
Unfortunately the search isn't working since I've upgraded to Mavericks. First I thought it is a Photostream issue, so I've deactivated and reactivated Photostream in system preferences. And wow, search is working just fine...I thought. The pictures I've taken for testing are present in the search folder. But then once again, no more additional pictures were updatet in he search folder.
So I recreated the search. But nothing changed. Search doesn't find anything, but all pictures taken with my iPhone are copied automatically into a subfolder of ~library/application support/iLifeassetmanagement/assets/sub over photostream. I've double-checked that by clicking through all subfolders and compare the included pictures with the pictures on my iPhone. Once again I've deactivated Photostream in system preferences and reactivated it. Once again it only worked once for the existing pictures. No additional pictures are added to the search.
I did some Internet research an someone mentioned that it could be a spotlight issue. So I've deactivated spotlight in the system preferences for Macintosh HD and reactivated it to force spotlight to build a new index. Then the search is working again once, but any new pictures will not be added although the pictures are within a subfolder of ...assests/sub
With Apperture I can also access all pictures, but no chance over the search I've defined.
Any suggestions or solutions for the above behaviour? I'm running out of ideas...
Thank you in advance.
DFault

C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

Smart mailbox not working correctly

I just created a new Smart Mailbox (I have others that work fine) and the criteria I put in was not what I needed and so I edited it. After closing out my mail and then reopening it, my Smart Mailbox had reverted to the old criteria and showed no messages again. After doing this several times, I deleted the mailbox entirely and then recreated a new one with a different name. All was working fine UNTIL I closed my mail and the next time I opened it, it had reverted to the old Name and criteria and was not giving me any mail again b/c the criteria was wrong. Can anyone help?? I am OS X - Yosemite.

David needs to get extra points for slipping in the Princess Bride reference.
As he points out, this smart mailbox rule should exclude all messages not from THIS calendar year--2007. If you want all messages older than one year, do date received is not in the last 12 months, and it should give you what you want.
G4 933 mhz Quicksilver Mac OS X (10.4.9) Wacom Intuos 2 tablet; Epson 2400 Photo; HP Deskjet 6840; LaCie 80gb D2 FWDV

Smart Mailbox not working correctly based on received date

I setup a smart mailbox with the condition:
Date Received is not in the last 1 year
I get plenty of messages where the date received was within the last year. Anyone know how to fix this problem.
Thanks in advance,
Roy

David needs to get extra points for slipping in the Princess Bride reference.
As he points out, this smart mailbox rule should exclude all messages not from THIS calendar year--2007. If you want all messages older than one year, do date received is not in the last 12 months, and it should give you what you want.
G4 933 mhz Quicksilver Mac OS X (10.4.9) Wacom Intuos 2 tablet; Epson 2400 Photo; HP Deskjet 6840; LaCie 80gb D2 FWDV

Smart Playlists not working correctly

Is anyone else able to reproduce this fault?
I have added a smart playlist simply called music... with the options set as follows:
Match (checked) ANY of the following rules...
Genre is not Podcast
Genre is not Lecture
Live Updating is also checked...
However, podcasts and my audio lectures are both appearing in this playlist... any ideas?

Match (checked) ANY of the following rules...
Genre is not Podcast
Genre is not Lecture
Live Updating is also checked...
This will match all songs. Because a song can be a podcast and still match the "Genre is not Lecture" rule.
Change it to "Match ALL" of those rules instead, and you'll get the results you want.

Smart Group not working Correctly

I use Plaxo to sync my Outlook (exchange) to my Address Book. My Outlook hits my blackberry, so I am going to Omit members of the group "Old".
I can add members to the group Old with no problem. It currently has 99 of my 800 contacts. I created a Smart Group that says to Not include cards that belong to Old. When I click on this list, it shows only 95 contacts, which should be much more. I deleted the addressbook-v22.abcddb file and restarted Address Book and it showed several more groups.
My Non Old Smart group is not very smart today.

C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

Smart actions not working since upgrade

since installing the upgrade this weekend, why is my smartactions not working correctly?

rlum1,
We want you to be able to still enjoy the smart actions on your device! What type of device do you have? What exactly is happening with your smart actions? Please provide details.
LindseyT_VZW
Follow us on Twitter @VZWSupport

I have OSX 10.7.5, my idvd is not working correctly. Should I re-download this version again , do you think that it will help to improve the idvd operation?

I have OSX 10.7.5 on my imac, my idvd is not working correctly. Should I re-download this version again , do you think that it will help to improve the idvd operation?

First, iDVD is not and never has been part of OS X. If iDVD is not working correctly, then you should investigate possible problems with that application, support files, preferences, or cache.
Of course you can always reinstall OS X if you wish:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Smart Tunnel not working correctly

Similar Messages

Maybe you are looking for