Smart URLS for Agile 9.3.1

Hi
I am trying to get the smart url for doc attached to item. I reviewed the SDK documentation. However in 9.3.1 there is no getshortcut menu.
Also i would like to arrive at the URL by the following method, which the sdk says its possible.
http://server/Agile/viewer/file/objectname/...etc
I do not want the GetShortcut link as the URL is going to be generated.
Anyone have any experience with this?
thanks

I would like to do the same to be able to access a parts Manufacturer page from another tool so that all the manyfacturers specs. can be accessed. Doesn't make sense to download all the specs when they are in Agile. The actions->copy URL to clipboard works but it's manual. The SDK says there is a simple URL that follows a standard format but it ends there. It would be nice to find it as a search category or generate it from a common path.

Similar Messages

Smart URL functionality

I have read about smart url functionality for Agile version 9.2 and above. I haven't been able to locate any documentation for Oracle Agile 6.1.1 on smart url functionality. Does this functionality exist?

We do have something similar called quick links. A quick link allows you to link to a specific P4P object. You can see the full listing for all apps in the extensibility guide in the Quick Links chapter. Here's an example of a GSM and NPD Project quick link. the xxxxx placeholder represents the object #.
GSM http://LOCALSITEURL/gsm/getSpecByNum.aspx?SpecNum=xxxxxxx-xxx
NPD Projects http://LOCALSITEURL/npd/MainPage/NPD.aspx?ContentKey=ProjectEditor&Load=xxxxxxx
We don't have a copy URL function from the object itself but this can easily be added with a simple navigation extension and a little javascript.

Error when setting JMS Destination for Agile PLM Content Services (cannot

In not the right forum please suggest the correct one.
Before creating the destination I did the following setup and testing.
1.) Created a JMS on the Weblogic Server
2.) Created a Jdeveloper BPEL Project and successfully put a message into the JMS queue
Here are the details for the new destination I am creating.
1.) Protocol = JMS
2.) Provider Context Factory = weblogic.jndi.WLInitialContextFactory
* this is the one that seems to be the cause of the error
3.) Connection Factory = jmstest/jmstest-cp
* this is my JNDI name for the connection pool
4.) Default Provider URL = t3://10.16.131.110:7001
* this is the URL for the Weblogic server
5.) Destination Name = jms/queueout
* this is the JNDI name for the queue
The error message I am getting when I click the button to "Test Destination" is
"The remote server returns the following message: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory"
I would appreciate any input
Thanks

Which version of Agile are you using?
There is a patch needed for agile 9.2 for weblogic server.
Please check the Metalink

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Short of dismantling and recreating a page how do i find out whats causing [Error: Invalid URL for Web Content Overlay]

Hi,
i received an indesign file to include in a folio that had links to the creators desktop where they had the assets for the web content overlay. When i try to update the folio i get the error message:
"Content generation error.
[Error: Invalid URL for Web Content Overlay]"
Which is fair enough.
The problem is, i have gone through and changed all URLs that I can see, but there is one somewhere, that I just can't find.
Is there a way to get a list of all web content overlays in a particular file? otherwise i will need to recreate the whole page again, and it has some pretty complex interactions which i rather wouldn't do.
I also cannot ask the original doc creator to just change the links as i'm sure he'll have the same issues as me, at not being able to track down the erroneous link.
The problem I have with DPS is that its not very transparent. you'll have to click on everything, and into every group to see what actions are on it, which can be extremely time consuming and frustrating when complex interactions are included.
thanks in advance for any assistance

I’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down.

How Do I Find the Full URL for Linking to Messages in the Forum

What is the best way to find the URL that links directly to a message I've posted in the forum?
When I receive an e-mail notifying me that a reply has been posted in a thread I'm subscribe to, there is a link to that reply in a format similar to https://support.mozilla.com/questions/862631'''#answer-279005'''. I discovered that if I hover my mouse over the '''Helpful / Not Helpful''' buttons next to each message when I'm using '''IE9 as my browser''', the specific answer # assigned to any message can be viewed in the status bar at the bottom of the screen (e.g., https://support.mozilla.com/questions/862631/'''vote/279005'''), but I can't figure out how to do this in Firefox.
Most other forums I post in assign a number to each message in a thread (e.g., message 7 of 25) that has the URL link embedded so that you simply right-click on the message number and choose '''"Copy Link Location"''' to obtain the direct URL for any message.
Windows Vista Home Premium 32-bit SP2 * NIS 2011 v. 18.6.0.29 * Firefox 8.0.0

Adobe Reader Touch (Windows Store app with "modern" UI) is not really accessible.
If you have a device running the Windows 8 operating system (as opposed to the Windows RT operating system), you can install and run Adobe Reader XI (desktop app with classic UI), which offers better accessibility support for screen readers. It also has the "Read Out Loud" functionality.

How do i find the url for my iMac

How di I find the URL for my iMac?

Can you explain in more detail what you mean? A URL is the address of a website - such as Apple.com or Harvard.edu. A computer will only have a URL if it has been set up as a web server and has name servers pointing to it (so that people looking for yourcomputer.com will be sent to the right place).
Conversely, every computer has an IP address, which is numerical. If you're connected directly to your internet, you will have a public IP address (it might look like 245.46.120.30, for example). Most people connect to the internet through a router, though, which gives them a private IP address only visible within their own network (something like 192.168.1.4).
Matt

How do I find the url for ical

I had to switch from iphone to droid and now I'm attempting to sync my macbook to my new phone. How do I find the url for iCal?

Please see this page:
http://help.apple.com/icloud/#mm6b1a88ad

How do I find the URL for a document loaded into Buzzword?

How do I find the URL for a document loaded into Buzzword?

What kind of document? What is Buzzword?

How can I create a URL for a PWA for MS Project Server 2013 project file that includes the view?

In earlier versions of PWA a URL for a project could include information on the particular view used. This was very handy for emailing people since when they clicked the URL they would see only the particular tasks in that view. In PWA for Project 2013
the URL contains the info for the project file only and does not include the view or filter or anything else.

Hi Scott,
As far as I can see, this is not possible anymore, since the view's list in the PDP (for example schedule PDP) is affecting only the webpart and not the entire webpage, meaning that the URL is not connected anymore to the view and vice-versa.
Indeed this could be annoying..
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Smart Form for cutomised Inovice, Functional spec

Dear all,
I need to give Functional specification for developing a smart form for Invoice. Tables are not as evident as we have in case of R/3. please give me general tips to give spec to abap consultant to fetch various fields.
where used list of tables for a particular field is also not helping much. I need
1) Bill to address
2) sold to address
3)condition data
4) terms of payment
5) reference date stuff
Please suggest me a general way or logic bassed on which i can ask my abap consultant to develop the smartform and driver prog as well.
Thnaks in advance,
Regards,
Kiran C

Hi
yes usually customers ask to adopt the same layout as they are already using. Usually I draw the layout on visio and assign a number for each field. In the spec I put the layout picture and and mention for which field where data will come from.
For example:
A. PO header:
Field number | Description | Source
1 | PO number | EKKO-EBELN
2 | Vendor code | EKKO-LIFNR
3 | Vendor name | LFA1-NAME1 * rule 1
C. Rules:
1 - select NAME1 from table LFA1 where LFA1-LIFNR = EKKO-LIFNR
Hope this helps.
Regards
Eduardo Chagas

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
http://www.switcheasy.com/products/CoverBuddy/
I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

Using a variable to insert into a URL for redirecting clients

I got a good one, can anyone help on this?
Using RoboHelp Version 8.02.208.
My company uses MicroStrategy to deploy several web-based data analysis products.
Each of these data products (there are 5) are deployed on different servers.
I have set up a single source WebHelp project and use build tags for product specific help output.
(I also have to modify the Start Page, TOC and Default Topic settings prior to generating each product help)
Everything on this works fine and is not a problem.
We have just implemented an Excel add-in for one of the products.
That add-in uses a locally installed CHM file for its help.
In order to provide customized help that can be updated without forcing the clients to reinstall the CHM help file locally, the source for the CHM file has one dummy topic. In that topic, I have used HTML code to redirect the client to the WebHelp for the product and have integrated the Excel add-in help to that product’s customized help. The result is that the CHM file is opened locally in the HTML help viewer. Inside the HTML help viewer window, I open the WebHelp.
The redirect HARD CODES the URL with the product specific server name and Start Page help topic.
That works fine and is not a problem for ONE PRODUCT.
We are in the process of adding this Excel add-in to other products.
Now here is where I cannot get this to work with my implementation.
The URL for each product is different and to make matters worse, the Start Page is different for each product as well.
So, I am working on options for implementation of multiple products and here is my question:
(1)    The following is an example of the redirect in the single topic of the CHM file:
<meta http-equiv="refresh" content="0;URL=https://server.com/ProductName/WebHelp/StartPage.htm#mergedProjects/ExcelPlugIn/ Overview.htm" />
(2)    The red portion of the URL above will need to be modified to support each individual product with a custom server, product name and start page HTM file name.
Is there a way to:
(1)    Add a variable in this HTML code
(2)    Once the product is identified, update the variable with the product specific URL content
(3)    Integrate the variable into the target URL of the HTML code that does the redirect
I think this is either not possible or more work than needed. My other option is to provide standalone Excel add-in help on a server and just have the Excel plug-in go to that (right now it is integrated into the product specific help and the client has access to the plug-in help AND the application help all at the same place).
Thanks to all in advance for any help/suggestions.
Michael F Weart
[email protected]

Thanks for the feedback - here is more informtion on the challenges of this implementation:
I can only distribute one CHM file to cover all 5 web-based products that can be accessed through the Excel plug-in.
Regardless of which of our 5 products is used to install the plug-in on the client's local hard drive, the same installer is used.
That one CHM file is installed locally on the client's hard drive.
(The out of the box CHM file for the plug-in only has general plug-in help content the locl install causes problems for updating the content).
We needed to be able to easily update the help without inconveniencing the clients.
So, I am not creating 5 different CHM files for each installer, since there is only one installer regardless of how many of the 5 products they have.
The plug-in has a server setting and web service setting for each product and the client must choose which they are accessing when they fire up the plug-in.
They may be accessing the plug-in for any of our 5 web-based products they have subscriptions for.
Which means, the one CHM file must be able to:
(1) determine the product they are accessing
(2) direct to one of the 5 servers with the online help.
Each of the 5 online helps are deployed on separate servers with different URL links (and the helps have all different URL links as well).
These online webhelp outputs have some identical content but also some customized content for the specific product they are actually accessing.
My original approach was pretty much the same as William's above. Have a variable in the CHM help, determine the server they are accessing from the plug-in and insert the customized portion of the URL to access the appropriate webhelp.
Keep the ideas/suggestions coming.
I also have a development person looking into how to update a variable on the CHM side to populate the URL.
Michael F Weart
[email protected]

Using Double Byte Characters in URL For Session Variables

When I supply the value for a session variable in the URL for an IRPT page where the value contains double byte characters, Japanese in this case, the characters are corrupted by the time they are entered for the session variables. Does anyone know a solution to this problem or experience in this area? Currently using xMII 11.5 SR3.

Hi Bryan,
I would suspect that under the covers the session variable is of datatype string. For double byte characters, it would need to be wstring. There is a better explanation to be found at:
Link: [Kanji and Java Datatypes|http://www.unix.com.ua/orelly/java-ent/jenut/ch10_04.htm] or you can try google on Kanji Datatype OR Kanji Java Datatype
It could also be a problem with the operating system which I ran into about 10 years ago, but I would hope that Microsoft had moved beyond that by now.
Maybe some more technical folks could chime in to confirm or deny my explanation.
Mike
Edited by: Michael Appleby on Jul 8, 2008 5:23 PM

Mobile Url for a site gives an error

when i try to access the mobile site of a SharePoint 2010 site it gives me the following error:
<input name="__EVENTARGUMENT" type="hidden" /> Error
Object reference not set to an instance of an object.
The mobile Url contains _layouts/mobile/mblwiki.aspx this site has wiki feature enabled

Hi Omar,
According to your description, my understanding is that the error occurred when you access the mobile URL for SharePoint site.
I recommend to append "?Mobile=1" to the end of the URL of the SharePoint site
to access the mobile view to see if the issue still occurs, such as
http://MyServer/MySite/default.aspx?Mobile=1.
If the error still occurs, I recommend to check if the mobile view is activated for SharePoint.
http://technet.microsoft.com/en-us/library/ff393832(v=office.14).aspx
More reference:
http://msdn.microsoft.com/en-us/library/office/ms462572(v=office.14).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Smart URLS for Agile 9.3.1

Similar Messages

Maybe you are looking for