Smart View - Options - Member Options - RadioButton "Top" or "Bottom"

Hello
I have installed Essbase 11.1.2 and am using Smart View with Excel 2007.
I would like to see Totals first and then on drill down get the details underneath of my total (instead of above my total, which is the default behaviour).
Under Options -> Member Options -> select Enterprise -> we can set the radio button from "Bottom" to "Top". Has anyone tried this already? Does it work for you?

Thomas, I actually just found out a way to show the Totals first. If you set up a SmartSlice you can choose in your options where you want your Ancestor to show up. You can choose to have it show up at the bottom of your detail or at the top. Hope this helps.

Similar Messages

Smart View menu bar option not showing in Word

Hello,
Recently had Smart View (11.1.2) installed on my PC. I can see the Smart View menu bar option in all office products except Word (2003). Any suggestions as to how to get this to show?
Thanks in advance.

You need to ensure the COM add-in is enabled. File > Options > Add-in.
If it's not shown, you will need to manually add the add-in referencing the HsAddin.dll from the Smartview\bin directory.

Importing Metadata in Smart View

Dear All,
In Smart view when I migrate the metadata from one worksheet to other its is not getting migrated. I have followed the below steps still its not..
To import metadata to a copied worksheet :
1. Back up your work.
2. From the Smart View menu, select Options, then Advanced, and ensure that Improved Metadata Storage is
selected.
3. Use Excel to copy a worksheet. This operation copies the visible contents of the source worksheet but not the
metadata (connection information, POV selections, alias tables and the like) to the destination worksheet.
4. With the destination worksheet active, from the Smart View menu, select More, then Import Metadata to
display a list of all open workbooks and their corresponding open worksheets.
5. From the list, select the worksheet that contains the metadata that you want to import to the destination
worksheet.
6. Click OK. You will be asked to confirm your selection.
7. Refresh.
Help in solving this issue is highly appreciated.
Thanks,
Kamal

I don't know what back end you are connecting to, but when I follow the steps you outlined with Essbase's Good Old Sample.Basic, it works just fine -- the members that were selected in the POV are migrated across.
This is on Excel 2007 with Essbase 11.1.2.0.
Regards,
Cameron Lackpour

Regarding display options in smart view

Hi All,
good afternoon.
In smart view , I would like to select “Member Name and Description” in “Member Name Display Options” section. However that selection is grayed out by system.
can you please help me in resolving this issue.
thanks in advance.

J,
I wonder if this is what the OP is getting at: Change alias table choice greyed out
Unless he really does mean description. <--Yes, I should read the post first.
So "description" in SmartView refers to a fully qualified member name/alias. That's really interesting, particularly as the DBAG doesn't use that term in its chapter on Duplicate Member Outlines.
Regards,
Cameron Lackpour

"Open in Smart View" option. Hyperion Planning version 11.1.1.3

Failure to download planning form to Smart View using the "Open in Smart View" option. Hyperion Planning version 11.1.1.3. Error message "Web launch operation has been cancelled.
Your feedback is appreciated.

I understand you are on 11.1.1.3.
However, this is documented in the Known Issues section of the Smart View 11.1.2.1 readme and could be worth a try:
When you try to open a Planning web form in Smart View through Workspace, you may get this error: “Web launch operation has been cancelled.” This happens if Essbase has not been added as a server in Shared Connections. Workaround: Open the Smart View Panel in Smart View and add an Essbase server as described in the online help or "Adding Essbase Servers" in chapter 2 of the Smart View User's Guide.
HTH-
Jasmine.

Need to Disable "Create New SmartView Slice" Option in Smart View

Hi All,
We are using Essbase 11.1.2 and we have one Essbase ASO Cube. For accessing that cubes using Hyperion Smartview (11.1.2.1.102(Build 208)).
As a security in shared services we have provided only read only access to all users and Users are accessing cube using Smart View.
There is one option in smartview “Create New Smartview slices” and using that option users are able to create “Smart View slice” even they have read only access.
Is there any option/Procedure to disable the option "Create New Smart View Slice" for every user.
Regards,
Brijesh

Hi,
I created a sr with oracle
their response is currently the same as Sreekumar Hariharan :
"Administrators and database administrators can create, modify, and delete Smart Slices. In
Essbase, if enabled by the administrator, all users can create, modify and delete Smart Slices"
But I read the documentation of course and I do not understand the meaning of the sentence "if enabled by the administrator, all users can create, modify and delete Smart Slices"
Thanks
ML

Smart view 11.1.2.1 disabled zoom in option

Hello,
I just intalled Smart View 11.1.2.1 on my client PC. Server is Essbase 11.1.1.3. Office 2007.
I can connect using Private connection and I can do a refresh and retrives my data but ... the option for Zoom In and Zoom out from the Essbase Ribbon are disabled.
I can even do a Zoom In using mouse Rigth Click --> Smart View --> Zoom In
Neither can do a Pivot from the POV to the Sheet ... Am i doing anything wrong?.
Regards,
APlanelles
Edited by: Antonio P. on 28-abr-2011 4:37

This may be due to the different releases. My understanding is Hyperion now requires all versions to be the same release. We were unabled to upgrade Essbase Studio from 11.1.1.3 to 11.1.2 because it would require a full upgrade which would impact the HFM and FDM components.

Smart View Options Window

Hi,
On some of our computers it takes up to ten seconds if we open the Smart View Options Window. On other maschines it opens immediatly. Do you have any idea?
It occurs on Version 11.1.2.1 and 11.1.2.2
thanks and best regards
Oliver

We have had some compatibility issues with certain Excel add-ins and the Smart View add-in on various machines and now advise users to disable any other add-ins when using SV....so this could be the case with you (although ours are generally stability issues rather than performance issues as you have reported.)
I guess the only way of knowing for sure is to disable all other add-ins and check performance. You can then re-introduce each add-in and see if you can identify the problem one.
Thanks
JB

Improved Metadata Storage option for Smart View

I have looked all through the manuals, but I cannot find any reference to the "Improved Metadata Storage" Smart View Option. Does anyone know what this option does and the Pros/Cons of using it?

Thank you for responding. I would like to resume having the "Save as PDF" option but the IE8 Browser is an older version and is unfortunately running slower and not well on some of the websites that need newer Browser versions. I checked out Chrome and don't like Firefox and still prefer the IE Browsers by comparison.
Is it very difficult for HP to add this handy feature back in a future HP SmartPrint release that is compatible with the IE Browser?
Thanks!

Hyperion Planning Smart View issue with Member Names & Aliases

Hi,
Im using Smart View "Essbase" Connection to a Hyperion Planning Application, ver 11.1.1.3, however with the essbase connection i am not able to select at the smart view options to see aliases, members or both. I change the setting ( Duplicate member names allowed =true) directly at the properties of the outline in EAS, and now i am able to see the aliases, however if time I refresh using web planning/workspace this setting is undone. Furthermore i dont thing i should use it with planning. Any comments?
Kind Regards

First of all I hope you have not changed the properties of the outline in EAS for a planning application.
For more information on using aliases in smartview have a read of :- Smartview --- Display options --- to display alias names
Also you will only be able to view member name or aliases not both at the same time.
Cheers
John
http://john-goodwin.blogspot.com/

Set top and bottom inset spacing values in Text Frame Options via jsx script

I am looking for a way to set the top and bottom inset spacing values only to 2 points in Text Frame Options via a .jsx scrpt.
For years, I have used a script that sets Preferences, such as:
with(app.storyPreferences){
    opticalMarginAlignment = false;
    opticalMarginSize = 12;                // pts
I would like to add the code to this same script that would make Top = 0p2 and Bottom 0p2 but leave Left and Right as 0p0.
Any help would be greatly appreciated.

Here is the full .jsx file that we now use to set preferences.
Ideally, this could be modified to include setting any text frame created to have 0p2 inset Top and Bottom, but 0p0 Left and Right:
//ApplicationTextDefaults
//An InDesign CS2 JavaScript
//Sets the application text defaults, which will become the text defaults for all
//new documents. Existing documents will remain unchanged.
with(app.textDefaults){
    alignToBaseline = false;        // align to baseline grid
    try {
//        appliedFont = app.fonts.item("Times New Roman");
        appliedFont = app.fonts.item("Helvetica");
    catch (e) {}
    try {
        fontStyle = "Medium";
    catch (e) {}
    autoleading = 100;
    balanceRaggedLines = false;
    baselineShift = 0;
    capitalization = Capitalization.normal;
    composer = "Adobe Paragraph Composer";
    desiredGlyphScaling = 100;
    desiredLetterSpacing = 0;
    desiredWordSpacing = 100;
    dropCapCharacters = 0;
    if (dropCapCharacters != 0) {
        dropCapLines = 3;
        //Assumes that the application has a default character style named "myDropCap"
        //dropCapStyle = app.characterStyles.item("myDropCap");
    fillColor = app.colors.item("Black");
    fillTint = 100;
    firstLineIndent = "0pt";
//    firstLineIndent = "14pt";
    gridAlignFirstLineOnly = false;
    horizontalScale = 100;
    hyphenateAfterFirst = 3;
    hyphenateBeforeLast = 4;
    hyphenateCapitalizedWords = false;
    hyphenateLadderLimit = 1;
    hyphenateWordsLongerThan = 5;
    hyphenation = true;
    hyphenationZone = "3p";
    hyphenWeight = 9;
    justification = Justification.leftAlign;
    keepAllLinesTogether = false;
    keepLinesTogether = true;
    keepFirstLines = 2;
    keepLastLines = 2;
    keepWithNext = 0;
    kerningMethod = "Optical";
    kerningValue = 0;
    leading = 6.3;
//    leading = 14;
    leftIndent = 0;
    ligatures = true;
    maximumGlyphScaling = 100;
    maximumLetterSpacing = 0;
    maximumWordSpacing = 160;
    minimumGlyphScaling = 100;
    minimumLetterSpacing = 0;
    minimumWordSpacing = 80;
    noBreak = false;
    otfContextualAlternate = true;
    otfDiscretionaryLigature = true;
    otfFigureStyle = OTFFigureStyle.proportionalOldstyle;
    otfFraction = true;
    otfHistorical = true;
    otfOrdinal = false;
    otfSlashedZero = true;
    otfSwash = false;
    otfTitling = false;
    overprintFill = false;
    overprintStroke = false;
    pointSize = 6.3;
//    pointSize = 11;
    position = Position.normal;
    rightIndent = 0;
    ruleAbove = false;
    if(ruleAbove == true){
        ruleAboveColor = app.colors.item("Black");
        ruleAboveGapColor = app.swatches.item("None");
        ruleAboveGapOverprint = false;
        ruleAboveGapTint = 100;
        ruleAboveLeftIndent = 0;
        ruleAboveLineWeight = .25;
        ruleAboveOffset = 14;
        ruleAboveOverprint = false;
        ruleAboveRightIndent = 0;
        ruleAboveTint = 100;
        ruleAboveType = app.strokeStyles.item("Solid");
        ruleAboveWidth = RuleWidth.columnWidth;
    ruleBelow = false;
    if(ruleBelow == true){
        ruleBelowColor = app.colors.item("Black");
        ruleBelowGapColor = app.swatches.item("None");
        ruleBelowGapOverprint = false;
        ruleBelowGapTint = 100;
        ruleBelowLeftIndent = 0;
        ruleBelowLineWeight = .25;
        ruleBelowOffset = 0;
        ruleBelowOverprint = false;
        ruleBelowRightIndent = 0;
        ruleBelowTint = 100;
        ruleBelowType = app.strokeStyles.item("Solid");
        ruleBelowWidth = RuleWidth.columnWidth;
    singleWordJustification = SingleWordJustification.leftAlign;
    skew = 0;
    spaceAfter = 0;
    spaceBefore = 0;
    startParagraph = StartParagraph.anywhere;
    strikeThru = false;
    if(strikeThru == true){
        strikeThroughColor = app.colors.item("Black");
        strikeThroughGapColor = app.swatches.item("None");
        strikeThroughGapOverprint = false;
        strikeThroughGapTint = 100;
        strikeThroughOffset = 3;
        strikeThroughOverprint = false;
        strikeThroughTint = 100;
        strikeThroughType = app.strokeStyles.item("Solid");
        strikeThroughWeight = .25;
    strokeColor = app.swatches.item("None");
    strokeTint = 100;
    strokeWeight = 0;
    tracking = 0;
    underline = false;
    if(underline == true){
        underlineColor = app.colors.item("Black");
        underlineGapColor = app.swatches.item("None");
        underlineGapOverprint = false;
        underlineGapTint = 100;
        underlineOffset = 3;
        underlineOverprint = false;
        underlineTint = 100;
        underlineType = app.strokeStyles.item("Solid");
        underlineWeight = .25
    verticalScale = 100;
//Units & Increments preference panel
//Must do this to make sure our units that we set are in points. The vert and horiz
//units that get set default to the current measurement unit. We set it to points
//so we can be sure of the value. We'll reset it later to the desired setting.
with(app.viewPreferences){
    horizontalMeasurementUnits = MeasurementUnits.points;    // Ruler Units, horizontal
    verticalMeasurementUnits = MeasurementUnits.points;        // Ruler Units, vertical
//General preference panel
with(app.generalPreferences){
    pageNumbering = PageNumberingOptions.section;    // Page Numbering, View
    toolTips = ToolTipOptions.normal;                    // Tool Tips
// Not supported in CS4
//    toolsPalette = ToolsPaletteOptions.doubleColumn;    // Floating Tool Palette
    completeFontDownloadGlyphLimit = 2000;                // Always Subset Fonts...
    try {
        //Wrapped in try/catch in case it is run with CS4 and earlier to avoid the error
        preventSelectingLockedItems = false;                // Needed for CS5+
    catch (e) {}
//Type preference panel
with (app.textEditingPreferences){
    tripleClickSelectsLine = true;    // Triple Click to Select a Line
    smartCutAndPaste = true;        // Adjust Spacing Automatically when Cutting and Pasting Words
    dragAndDropTextInLayout = false;    // Enable in Layout View
    allowDragAndDropTextInStory = true;    // Enable in Story Editor
with(app.textPreferences){
    typographersQuotes = true;            // Use Typographer's Quotes
    useOpticalSize = true;                // Automatically Use Correct Optical Size
    scalingAdjustsText = true;            // Adjust Text Attributes when Scaling
    useParagraphLeading = false;    // Apply Leading to Entire Paragraphs
    linkTextFilesWhenImporting = false;    // Create Links when Placing Text and Spreadsheet Files
// Missing following (Font Preview Size, Past All Information/Text Only)
//Advanced Type preference panel
with(app.textPreferences){
    superscriptSize = 58.3;                // Superscript, size
    superscriptPosition = 33.3;            // Superscript, position
    subscriptSize = 58.3;                // Subscript, size
    subscriptPosition = 33.3;            // Subscript, position
    smallCap = 70;                        // Smallcap
with(app.imePreferences){
    inlineInput = false;                // Use Inline Input for Non-Latin Text
//Composition preference panel
with(app.textPreferences){
    highlightKeeps = false;                    // Keep Violations
    highlightHjViolations = false;            // H&J Violations
    highlightCustomSpacing = false;            // Custom Tracking/Kerning
    highlightSubstitutedFonts = true;    // Substituted Fonts
    highlightSubstitutedGlyphs = false;    // Substituted Glyphs
    justifyTextWraps = false;                // Justify Text Next to an Object
    abutTextToTextWrap = true;                // Skip by Leading
    zOrderTextWrap = false;                    // Text Wrap Only Affects Text Beneath
//Units & Increments preference panel
with(app.viewPreferences){
    rulerOrigin = RulerOrigin.spreadOrigin;                    // Ruler Units, origin
//    These are set at the end of the script after all the changes have been made
//    horizontalMeasurementUnits = MeasurementUnits.points;    // Ruler Units, horizontal
//    verticalMeasurementUnits = MeasurementUnits.inches;        // Ruler Units, vertical
    pointsPerInch = 72;                    // Point/Pica Size, Points/Inch
    cursorKeyIncrement = 1;                // Keyboard Increment, Cursor Key
with(app.textPreferences){
    baselineShiftKeyIncrement = 2;    // Keyboard Increment, Baseline Shift
    leadingKeyIncrement = 2;        // Keyboard Increment, Size/Leading
    kerningKeyIncrement = 20;            // Keyboard Increment, Kerning
//Grids preference panel
with(app.gridPreferences){
    baselineColor = UIColors.lightBlue;    // Baseline Grid, Color
    baselineStart = 48;                        // Baseline Grid, Start
    baselineDivision = 6;                    // Baseline Grid, Increment Every
    baselineViewThreshold = 50;                // Baseline Grid, View Threshold
    baselineGridRelativeOption = BaselineGridRelativeOption.topOfPageOfBaselineGridRelativeOption;    // Baseline Grid, Relative To
    gridColor = UIColors.lightGray;            // Document Grid, Color
    horizontalGridlineDivision = 12;    // Document Grid, Horizontal, Gridline Every
    horizontalGridSubdivision = 12;            // Document Grid, Horizontal, Subdivisions
    verticalGridlineDivision = 12;            // Document Gird, Vertical, Gridline Every
    verticalGridSubdivision = 12;            // Document Grid, Vertical, Subdivisions
    gridsInBack = true;                        // Grids in Back
    documentGridSnapto = false;                // snap to grid or not
    documentGridShown = false;                // show document grid
//Guides & Pasteboard preference panel
with(app.documentPreferences){
    marginGuideColor = UIColors.violet;                // Color, Margins
    columnGuideColor = UIColors.magenta;            // Color, Columns
with(app.pasteboardPreferences){
    bleedGuideColor = UIColors.fiesta;                // Color, Bleed
    slugGuideColor = UIColors.gridBlue;                // Color, Slug
    previewBackgroundColor = UIColors.lightGray;    // Color, Preview Background
    minimumSpaceAboveAndBelow = 72;                    // Minimum Vertical Offset
with(app.viewPreferences){
    guideSnaptoZone = 4;                            // Snap to Zone
with(app.guidePreferences){
    guidesInBack = false;                            // Guides in Back
//Dictionary preference panel
with(app.dictionaryPreferences){
    composition = ComposeUsing.both;    // Hyphenatin Exceptions, Compose Using
    mergeUserDictionary = false;    // Merge User Dictionary into Document
    recomposeWhenChanged = true;    // Recompose All Stories When Modified
// Missing (Lang, Hyph, Spelling, Double Quotes, Single Quotes)
//Spelling preference panel
with(app.spellPreferences){
    checkMisspelledWords = true;                    // Find, Misspelled Words
    checkRepeatedWords = true;                        // Find, Repeated Words
    checkCapitalizedWords = true;                    // Find, Uncapitalized Words
    checkCapitalizedSentences = true;                // Find, Uncapitalized Sentences
    dynamicSpellCheck = true;                        // Enable Dynamic Spelling
    misspelledWordColor = UIColors.red;                // Color, Misspelled Words
    repeatedWordColor = UIColors.green;                // Color, Repeated Words
    uncapitalizedWordColor = UIColors.green;    // Color, Uncapitalized Words
    uncapitalizedSentenceColor = UIColors.green;    // Color, Uncapitalized Sentences
//Autocorrect preference panel
with(app.autoCorrectPreferences){
    autoCorrect = true;                            // Enable Autocorrect
    autoCorrectCapitalizationErrors = false;    // Autocorrect Capitalization
// Missing (Language, Misspelled word pairs)
//Display Performance preference panel
with(app.displayPerformancePreferences){
    defaultDisplaySettings = ViewDisplaySettings.typical;    // Preserve Object-Level
    persistLocalSettings = false;
// Missing (antialiasiing, greek below
//Story Editor Display preference panel
with(app.galleyPreferences){
    textColor = InCopyUIColors.black;                // Text Color
    backgroundColor = InCopyUIColors.white;            // Background
    smoothText = true;                                // Enable Anti-Aliasing
    antiAliasType = AntiAliasType.grayAntialiasing;    // Type
    cursorType = CursorTypes.standardCursor;    // Cursor Type
    blinkCursor = true;                                // Blink
// Missing (Font, Size, Line Spacing & Theme)
//File Handling preference panel
with(app.generalPreferences){
    includePreview = true;                        // Always Save Preview Images with Doc
    previewSize = PreviewSizeOptions.medium;    // Preview Size
with(app.clipboardPreferences){
    preferPDFWhenPasting = false;                // Prefer PDF When Pasting
    copyPDFToClipboard = true;                    // Copy PDF to Clipboard
    preservePdfClipboardAtQuit = false;            // Preserve PDF Data at Quit
// Missing (Enable Version Cue)
//    Optical margin (hanging punctuation, outside margins)
with(app.storyPreferences){
    opticalMarginAlignment = false;
    opticalMarginSize = 12;                // pts
//Wrap Up (do at end of script)
//Units & Increments preference panel
//Must do this to make sure our units that we set are in points. The vert and horiz
//units that get set default to the current measurement unit. We set it to points
//so we can be sure of the value. We'll reset it later to the desired setting.
with(app.viewPreferences){
    horizontalMeasurementUnits = MeasurementUnits.picas;    // Ruler Units, horizontal
    verticalMeasurementUnits = MeasurementUnits.inches;    // Ruler Units, vertical
//    These two flags are turned off to avoid the error message about
//    missing image links when InDesign opens an ad. This can especially
//    be a problem when doing batch processes.
with(app.linkingPreferences){
    checkLinksAtOpen = false;            // checkbox: true/false
    findMissingLinksAtOpen = false;        // checkbox: true/false

Member Selection issue Smart View 11.1.2.1.102

Hi there!
I am experiencing an issue with several different cubes when accessing the member selection function in Smart View version 11.1.2.1.102. The issue is isolated to 4 Essbase cubes, but among the 4 are both ASO & BSO.
When I highlight the top, left-most Dimension name and click member selection, NO member names display and the dropdown list is unavailable. As soon as the given Dimension is moved out of the POV, I am able to see the full member list. This also means that the member that has moved into the top, left-most position now has the issue of not being able to select any members (certain dimensions are fine no matter their position).
I am able to move members around by pivoting the dimension and the member selection function behaves normally for some, but the issue pops back up as soon the dimension is moved back to the POV position.
If anyone has run into this issue with SmartView before and has a fix, please let me know. I would be happy to clarify my issue if anyone is unclear on what exactly I am trying to describe.
Thank you for your time!

This was a bug in 11.1.2.1.102. I'm not sure if it was fixed in 11.1.2.1.103 or 11.1.2.2 (I think 11.1.2.103)
It does not hurt you to upgrade to a higher version of Smart View

Need a JavaScript to enable/view Multi-line option for Text fields.

Hello All,
I need a JavaScript to enable/view Multi-line option for all the Text fields in PDF Form.
Assume that I have a PDF form of Fields from F1 to F100 and it contains 25 Checkboxes, 25 Combo Box and 50 Text Fields. Now i need a javascript for which i need to enable Multiline for only Text Fields. So Is there any JS for which i can enable the Multiline option for only Text fields and not for ComboBox or Checkbox.

Hi timo,
Thanks for your help. iam trying to use the iteraor approch to do this. but i don't know how to fetch the data entered in the form that was built by the iterator. can you please tell me .
thanks

View in conversation option is lost

Hi all
I have lost my view in conversation option.
I can see the option on old emails but not on new ones.
Is that because of an upgrade?
how can I get it back?
Thanks
Alberto

I experience this also sometimes (whatsapp), is this a bug??
sometimes when a person writes 2-3 messages in a row (for instance) in whatsapp (im in standby mode), it sometimes only displayes ONE message in lock screen mode (though he/she wrote more than 1), and sometimes shows the right corresponding written messages!
Why is this?
its really annoyoing when you get messages in lock screen mode BUT it doesnt stay and remain so you notice it. That way you get missed messages etc and notices it first...when doing the "pull-down list".
FIX THIS

I can no longer click to have my scroll options appear for scrolling.. there is no top or bottom option anymore.. help!

when i was using internet explorer i was able to click on the scroll bar and move from top to bottom of page and other things.. there is no longer this option with foxfire.. i must now click individually to move!! what a pain.. please help me..

You can try http://kb.mozillazine.org/middlemouse.scrollbarPosition
See also http://kb.mozillazine.org/about%3Aconfig

Smart View - Options - Member Options - RadioButton "Top" or "Bottom"

Similar Messages

Maybe you are looking for