Smart View Options Window

Hi,
On some of our computers it takes up to ten seconds if we open the Smart View Options Window. On other maschines it opens immediatly. Do you have any idea?
It occurs on Version 11.1.2.1 and 11.1.2.2
thanks and best regards
Oliver

We have had some compatibility issues with certain Excel add-ins and the Smart View add-in on various machines and now advise users to disable any other add-ins when using SV....so this could be the case with you (although ours are generally stability issues rather than performance issues as you have reported.)
I guess the only way of knowing for sure is to disable all other add-ins and check performance. You can then re-introduce each add-in and see if you can identify the problem one.
Thanks
JB

Similar Messages

"Open in Smart View" option. Hyperion Planning version 11.1.1.3

Failure to download planning form to Smart View using the "Open in Smart View" option. Hyperion Planning version 11.1.1.3. Error message "Web launch operation has been cancelled.
Your feedback is appreciated.

I understand you are on 11.1.1.3.
However, this is documented in the Known Issues section of the Smart View 11.1.2.1 readme and could be worth a try:
When you try to open a Planning web form in Smart View through Workspace, you may get this error: “Web launch operation has been cancelled.” This happens if Essbase has not been added as a server in Shared Connections. Workaround: Open the Smart View Panel in Smart View and add an Essbase server as described in the online help or "Adding Essbase Servers" in chapter 2 of the Smart View User's Guide.
HTH-
Jasmine.

Problems with "show view options window"

In Snow Leopard when I click Finder>View> Show View Options. The window that pops up looks different form what is supposed to be, is like this.There is no "use as default" button. I tried everything, restarting in safe disk mode, deleting all .DS_Store files, deleting the com.apple.finder.plist form the Preferences of the User without any success. Can anyone help? Am I left with just having the re-install the system?
Thanks a lot for the help

Although the Desktop is sometimes treated as if it were a Finder window, it is a special case. And, in this case, the View Options window for the Desktop (which you have depicted) will not display the "Always open" choice, since Icon view is the only view for the Desktop; hence, there is o Save as Defaults button for it either.
However, if you open the Desktop in a Finder window, such as by clicking the item Desktop in the Sidebar of a Finder (folder) window so that the Desktop is replicated in a separate window, you can open the View Options screen for that 'folder' and have those settings available.

'Show View Options" window colors is screwed up

If I open a folder window and then select Show View Options from the View menubar item I can change the color of that window. However, it will change to some completely different color after I close that window then reopen it. Upon closing and reopening repeatedly, it will keep alternating between my original color choice and the completely different color.
This happens if I use the color wheel to pick a color but it does not happen if I choose crayons for picking the color.
I have done a complete erase and install of 10.4.8 and with no other software added and the problem persists.
Has anyone else experienced this with a 2GHz Macbook core 2 duo running 10.4.8?
2GHz Macbook Core 2 Duo Mac OS X (10.4.8)

I'm experiencing the same problem. However, I don't think it's defaulting to an arbitrary colour. Rather, it seems to be defaulting to the exact opposite colour (than whatever colour was selected) in the spectrum.
For example, if I set the background colour of a folder to red, it instead defaults to green (and vice versa). This is consistent for all opposing colours.
I hadn't clued into Crayons being different — thanks!
BlackBook Mac OS X (10.4.9) 2GB memory. 120GB hard drive.

Smart View - Options - Member Options - RadioButton "Top" or "Bottom"

Hello
I have installed Essbase 11.1.2 and am using Smart View with Excel 2007.
I would like to see Totals first and then on drill down get the details underneath of my total (instead of above my total, which is the default behaviour).
Under Options -> Member Options -> select Enterprise -> we can set the radio button from "Bottom" to "Top". Has anyone tried this already? Does it work for you?

Thomas, I actually just found out a way to show the Totals first. If you set up a SmartSlice you can choose in your options where you want your Ancestor to show up. You can choose to have it show up at the bottom of your detail or at the top. Hope this helps.

Open in Smart View option not working.

Hey there,
We have been having this problem for a few days now,
We have Hyperion 11.1.1.3 on a UNIX Server,and when users try to open a planning data form using the "Open In SmartView" it never opens.
All that it says is "Windows is trying to run some services do you want to wait?"
The OS that's on the users systems is Windows 7 and the browser is IE8
Please let me know if some one have a fix to this..
Thanks

It is likely protected mode in IE. As a work around you can disable protected mode and try it. This a know bug that will be addressed in a future release.

Smart View internal metadata error when creating SmartView reports

Hi all,
I have a really strange problem when trying to use HsGetValue -functions in Smart View (in Excel 2010).
The thing is that I can create a lot of formulas for a sheet that have links to other sheets. However, in some pont (I don't exactly when it happens), I quite randomly get an error in Excel saying "This workbook contains Smart View internal metadata that needs to be repaired. This will automatically be repaired but may take some time". This error box appears a few times, I just click it and then it disappears. Obviously, this is annoying and the Excel is unusable.
Usually it happens when I try to format the sheet or add, e.g., company logo into the sheet, or try to do a bit more difficult linking of the cells.
Any ideas what is going on here? Smart View version is 11.1.2.1.103 (Build 100).
Thanks in advance!

Please take a look at KB ID 1432526.1. I've copied the text below.
Applies to:
Hyperion Financial Management - Version: 11.1.2.1.102 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
The following message is displayed when opening the Smart View files:
This workbook contains Smart View internal metadata that needs to be repaired. This will automatically be repaired but may take some time.
It may take a long time to open or save the Smart View templates.
Changes
Smart View has been installed by a user different, than the one that is currently logged on the workstation, i.e. service account or installation account.
Cause
When the user accesses Smart View for the first time, on a workstation where the SmartView has been installed by another user, the following registry key will be missing in the user's profile:
HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"UseStorageCompression"=hex:01
"SelectedOptionTab"=hex:02
If SmartView is installed by a different user i.e. service account or installation account, then the user profile registry will be missing "UseStorageCompression" and "SelectedOptionTab", resulting in a incorrect saving of file metadata.
Solution
Follow the steps below to automatically create the required registry keys for the current user profile:
1.Open Excel and select Smart View menu.
2.Click the "Options" icon to open the Options window.
3.In the "Advanced" tab, under the "Compatibility" section make sure the "Reduce Excel File Size" option is selected and click OK.
4.The following Windows Registry keys will be created under user profile, enabling proper compression of the metadata:
[HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"UseStorageCompression"=hex:01
"SelectedOptionTab"=hex:025.Now the user should be able to open the smartview template without the error message.
6.Additionally it is also recommended to select the "Improve Metadata Storage" option in the Smart View Options window which will create the following registry key:
[HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"IgnoreShapes"=hex:01

View Options defaults to "All Windows"

I've seen other unresolved posts. Maybe this has been corrected in newer versions of OS X. Is there a plist setting that will configure the "View Options" to default to "This window only", instead of "All Windows"? I don't know how many times I've changed the size of my icons in a folder, only to find that I've changed them everywhere. Any one know a way around this?
Thanks,
Alfredo

What we were referring to is what happens when you create a new folder and bring up View Options: at the top the default that is automatically checked is All Windows. If you unthinkingly set various view options for that folder, without checking the This Window Only, then those options will be applied to all new folders, and all folders that do not already have settings of their own. However, folders that you have at some point selected and checked the This Window option, then set custom view options for it, will be unaffected.
I suspect the problem that you are running into is that folders you have previously worked with will not be changed. Try this:
1. Create a new folder, bring up View Options, leave the All Windows checked
2. Run through List view and Icon view and make some settings
3. Leave the View options window open and then start opening some folders that you are unlikely to have ever opened before
4. Those that you haven't worked with should show the All Windows box checked, and display your new settings when you change to the various views
5. Windows you have set before will have the This Window Only box checked, and display whatever options you previously set for them
While this can all be confusing, and frustrating, it works for people who use different options in different folders for different purposes. If you could inadvertantly wipe out all the choices you had made for special purposes with one forgetful moment people would be even more distraught than they are now.
To accomplish what you want leave the settings you want check for All in a new folder. Every time you open a folder that isn't that way, and it has This Window checked, you'll need to change it to your preference. Eventually all the folders you use will be what you want, and all new folders will inherit the All Window settings you have chosen.
Francine
Francine
Schwieder

Anyone?... Set View Options Default to 'This window only'

I came across this discussion (below) that I could not find a solution for. Why does the View Options window always default to 'All Windows'? Usually when you are changing a window setting, you are doing it for that window. Obviously you should not have to change the All Windows settings that often right?
There has got to be some plist settings (which I could not find) that will automatically set the View Options to 'This Window Only' rather than 'All Windows'.
--> http://discussions.apple.com/thread.jspa?messageID=702637
Subject: Change Show View Options Default to 'This window only' ??
Message: I find it very annoying that the finder's default in show view options goes to 'All Windows' rather than 'This Window Only' -- i end up constantly chaning the appearance of folders, much to my chagrin. Is there any way to have the default be on 'This window only" ??
Thanks!
PowerBook G4 1.33Ghz / G5 Tower Dual 2Ghz Mac OS X (10.4.2) BBedit, Launchbar (obdev.com), Gmail, Sony Ericsson Z520a, Interarchy, Shuffle

Yes, I too find the default maddening and know of no way to change it. AFAIK the behavior is hard coded into the Finder. I would be delighted if that were not the case... You can always send Feedback on the issue:
http://www.apple.com/macosx/feedback/
Of course, considering the number of Finder problems I doubt anything much will come of it, but you never know.
Francine
Schwieder

Improved Metadata Storage option for Smart View

I have looked all through the manuals, but I cannot find any reference to the "Improved Metadata Storage" Smart View Option. Does anyone know what this option does and the Pros/Cons of using it?

Thank you for responding. I would like to resume having the "Save as PDF" option but the IE8 Browser is an older version and is unfortunately running slower and not well on some of the websites that need newer Browser versions. I checked out Chrome and don't like Firefox and still prefer the IE Browsers by comparison.
Is it very difficult for HP to add this handy feature back in a future HP SmartPrint release that is compatible with the IE Browser?
Thanks!

HFM Data Form in Smart View - Improper Suppression

We have several data forms that are opened by a group of controllers every month to load forecast information to HFM. This data form is opened by all of these users in Excel and submitted back to HFM via Smart View.
We have instructed all of the users to turn off ALL suppression while working with the data forms because there are some invalid intersections for ICP based on the input entity. The form is rendering properly for all users but one. When he opens the data form it appears to show all of the lines, but then once it fully loads, it is removing/suppressing one line that is an invalid intersection. In checking his Smart View options, I can clearly say that he does not have ANY of the suppression options in use.
Has anyone experienced this issue? Are there any workarounds? Why would this only happen for one user when 10 others have no issue when using the same file/form/options?
Your help is appreciated, as always!
Scott

Hi Scott,
If this is only for one user, I doubt something wrong in his profile.
Ask your IT to have his profile recreated to see if the issue disappears.
Hope this helps,
Thank you,
Charles Babu J

Smart View for Essbase Not Available in Planning Rapid Deployment

I have successfully deployed EPM 11.1.2.3 by following the steps in the Planning Rapid Deployment guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I bring up Smart View using a Shared Connections URL of http://<servername>:9000/workspace/SmartViewProviders, I only get connections for Planning and for the Reporting and Analysis Framework. How can a I get a connection for Essbase?

As it turns out, the 11.1.2.3 Planning Rapid Deployment wizard doesn't install Essbase Provider Services, just Planning Provider Services and Reporting and Analysis Provider Services. Until I installed Essbase Provider Services, I wasn't even able to create a private connection to Essbase. I had to run InstallTool.cmd and select "Provider Services Web Application" from the Essbase section of the selection screen. I also had to run the configuration utility and select "Deploy to Application Server" under "Provider Services" in the Essbase section of the selection screen.
After that, I was able to create a private connection to Essbase with this URL: http://<server name>:9000/aps/APS
Although the private connection was now working, the Essbase connection was still not showing up as a shared connection in Excel, when I set the Excel Smart View option for Shared Connections URL to http://<server name>:9000/workspace/SmartViewProviders. I was able to get this working by running the configuration utility again and selecting "Configure Web Server" in the "Hyperion Foundation" section of the selection screen.
I was also able to create an XML file as Celvin suggested, using http://<server name>:9000/aps/APS for the Essbase connection. Thanks for the suggestion!
-Tom

Hyperion Planning Smart View issue with Member Names & Aliases

Hi,
Im using Smart View "Essbase" Connection to a Hyperion Planning Application, ver 11.1.1.3, however with the essbase connection i am not able to select at the smart view options to see aliases, members or both. I change the setting ( Duplicate member names allowed =true) directly at the properties of the outline in EAS, and now i am able to see the aliases, however if time I refresh using web planning/workspace this setting is undone. Furthermore i dont thing i should use it with planning. Any comments?
Kind Regards

First of all I hope you have not changed the properties of the outline in EAS for a planning application.
For more information on using aliases in smartview have a read of :- Smartview --- Display options --- to display alias names
Also you will only be able to view member name or aliases not both at the same time.
Cheers
John
http://john-goodwin.blogspot.com/

HsSetValue in Smart View 11.1.2.1.103

Greetings, the team I am working in is having an issue executing the hssetvalue command. The function is built and, submit data is pressed and, the data is not saved to the database. We also used the refresh button with the same result. The submit zero checkbox is checked within the Smart View options. Is there something that we are missing? Please advise. Thanks.
Edited by: 909326 on Apr 25, 2012 8:38 AM

Greetings, the team I am working in is having an issue executing the hsgetvalue command. The function is built and, submit data is pressed and, the data is not saved to the database. We also used the refresh button with the same result. The submit zero checkbox is checked within the Smart View options. Is there something that we are missing? Please advise. Thanks I'm a little confused. You're wanting to put data into the database, but you're using HSGetValue? Are you pulling data from one connection and submitting that data to another? You used the refresh button with the same result as what?
What is the issue you are having with the HSGetValue?

ITunes 11.0.3.42 - Show View Options Doesn't work

I just upgraded my Windows PC to iTunes 11.0.3.42, and I am trying to enable showing the artwork in the songs view. However, when try to open the "Show View Options" screen, it will not open. An icon appears in my taskbar, but when I click on it to see the window, it disappears. No matter what I try, it will not show the window. I have tried minimizing and moving the main iTunes window to see if it is hiding behind it, but I can't seem to get it to display. Without this window, I cannot turn on the Album Artwork in the songs view. Tried using the CTRL-J shortcut, and I get the same behavior.
Any ideas? Anyone else having this issue?

I had this problem for a long time and I finally found a fix!
Open iTunes, and then click View -> Show View Options. And of course, you can't get to the window no matter what you do, even though it shows up in the task bar, right?
Leave iTunes just like it is. Then go to your desktop, right click, and click screen resolution and change it. Let the resolution change and then just let it automatically change back to your previous resolution and you're done! The View Options window should now be accessible.

Smart View Options Window

Similar Messages

Maybe you are looking for