Smart Wi Fi and E3000

I just received an email about updating software for the new Smart Wi Fi but I do not see the E3000 router listing in the compatible routers.  Does anyone know if the software will work with my router?
Thanks

Weird. Checking linksys' website, the smart wifi routers are only EA6500, EA4500, EA3500, EA2700 and E4200 v2. Perhaps you received the email notification to inform you that if you are using one of the smart wifi routers, there's an upgrade/update available.

Similar Messages

  • HT4356 I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi

    I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi

    Shannmo-
    The HP PhotoSmart 5514 is on Apple's list of AirPrint printers, so it should work.  <iOS: AirPrint 101>
    One problem might be that your WiFi router does not correctly handle Bonjour data required by AirPrint.  Contact the router's manufacturer to see if there is a change to its setup or a firmware update that will solve the problem.
    I had a printing problem several months ago, where the WiFi had jumped to a neighbor's WiFi that happened to have the same name.  There are a LOT of WiFi routers out there named "Linksys"!
    Fred

  • [svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

    Revision: 10545
    Author:   [email protected]
    Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
    Log Message:
    Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
    QE Notes: 2 Mustella tests fail:
    components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
    components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
    These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
    Doc Notes: None
    Bugs: SDK-15241
    Reviewer: Darrell
    API Change: No
    Is noteworthy for integration: No
    tests: checkintests mustella/browser/DataGrid
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-15241
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

    Hi Matthias,
    Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
    At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional).  We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files).  We also use VIPM Enterprise to distribute new VI Packages over the network.
    Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
    Please feel free to contact JKI if you have any specific questions about these products.
    Thanks,
    -Jim 

  • HTML Code for Smart Link Edit and Logout items

    I am using an HTML template and would like to include the Smart Link Edit and Logout items in a TABLE. How do I do this?
    Is there a way to get the code for these Smart Links (ORACLE tags) and include them?

    According to Oracle Metalink "Note:368720.1 - When ILS is Enabled the Edit Smartlink is visible to Users that are not entitled to see it", that is the expected behavior whether you are using the "edit" substitution tags or the "edit" smartlink on a page when the page has item-level access enabled. I don't like it but I can understand why that is the behavior since an end user may have access to manage/edit just one item on a page or just one tabbed region on a page and they need a way to put the page into edit mode in order to edit their item(s). If a user has nothing to edit on a page, then they won't be able to do anything in edit mode anyway.
    On the employee portal I work on, there is the possibility that every page may have a different set of users/groups that need to edit items/regions on the page AND the edit smartlink is published on the portal page template so basically, all employees can see the Edit link but if they click on it, only those employees that have items/regions to edit/manage will be able to really do anything while in edit mode.
    However, on the customer portal I work on, there is only one group that manages content site-wide so I was able to publish the Edit smartlink on the portal page template and change its access to the one group that manages content so they're the only ones that can see the Edit link on every page.
    The substitution tags for Logout are #PORTAL.LOGOUT.URL# and #PORTAL.LOGOUT.LABEL# (I use those so I can control the html & css) or just #PORTAL.LOGOUT# (which does both the label and url). The list of all substitution tags is available in Oracle Application Server Portal Help.

  • Smart Mail Boxes and how they work?

    I am having some difficulty with Smart Mail Boxes, either that or I am not understanding them correctly
    So I created a Smart Mail Box so that all the mail which included a particular recipient would go into it, which it does. But I also have the mail in my in-box as well
    What I was hoping is that all that particular mail would just go into the smart mail box and not be in the in-box.
    Am I doing something wrong?
    Any help would be appreciated.
    Philip

    No, you are not doing anything wrong. The original e-mail stays in your inbox until deleted, which will also delete it from the Smart Folder. The Smart Mailbox is a 'sorting' tool,but it doesn't actual contain the e-mails.

  • T450s -- Display, NGFF SSD, Smart Card Reader, and m.2 SSD slots

    I'm looking to order a T450s and have a few questions about options when configuring the order:
    1080 Display -- Does anyone know if the 1080 display (non-touch) is made by LG or AUO or someone else? There was extensive discussion about the T440s, and people got different brands and the AUO was the preferred brand.
    16GB m.2 NGFF SSD -- If I remove this option, and want to add a 3rd party compatible NGFF SSD later, can I do this?
    3rd m.2 SSD Slot -- The options are None, 3rd m.2 SSD slot, or Smart Card Reader. If I select the Smart Card Reader option, can I later remove the Smart Card Reader and use it as a 3rd m.2 SSD slot? Or, if I select 3rd m.2 SSD slot and later want to use it for a Smart Card Reader, can I buy a Smart Card Reader and plug it into the slot?

    Lenovo uses different FHD diplays for the T450s: one by AU Optronics and the other by LG Display.
    However, the T450s uses a different LG display than the T440s. The LG screen of the T450s ("
    LP140WF3-SPD1") seems to be much better than the LG screen of the T440s.
    If you remove the 16GB M.2 SSD option, you can add a M.2 SSD later.
    If you have a device with two M.2 slots, you can't use a M.2 SSD and WWAN at the same time.
    If you have a device with three M.2 slots, you can only use single-sided M.2 SSDs in the third M.2 slot.
    Both the SmartCard reader and the third M.2 slot are attached to the mainboard via a flexible flat cable.
    If you choose the SmartCard reader, the warranty might be lost if you want to use the third M.2 slot, because you have to replace some parts that aren't so-called CRUs (consumer replaceable units).

  • Compaq 6910p Smart card reader and a sim care

    I have a compaq 6910p laptop, what is a  Smart card reader and the sim card use for

    Hey marionholt,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps!
    I worked on behalf of HP

  • Database Smart Flash Cache and Data Guard

    We are on Oracle 11.2.0.2 on OEL 5 and our considering buying fusion io (PCIe flash drives) for our Production (Primary) database.
    My question is; Can we use Physical Data Guard with the Primary side using Database Smart Flash Cache and keep-ing tables and/or partitions in the Flash Cache and have a Standby side that does not have Database Smart Flash Cache?

    Yes you can.
    Data Guard will not check what type drive you are using. As long as you meet the database and network requirements it will work.
    http://www.oracle.com/technetwork/database/features/availability/maa-090890.html
    Check out these white papers if you have concerns
    "Migration to Automatic Storage Management (ASM)"
    "Best Practices for Creating a Low-Cost Storage Grid for Oracle Databases"
    In addition here's an example of using two different file systems with Data Guard
    http://pythianpang.wordpress.com/2009/07/07/data-guard-asm-primary-to-filesystem-physical-standby-using-rman-duplicate/
    Best Regards
    mseberg

  • HP Smart Web Printing and IE8

    Hi, I am trying to help some friends who have recently bought a new HP desktop and HP printer.
    We have set up both and can print from programs installed, thats no problem. When we try to print a page from IE8 nothing at all happens. We have the HP Smart Web Printing software installed, but there is no icon on the tool bar, and it does not seem to be off the side of the screen. We have tried downloading and installing the Smart Web printing software again, but still it fails to work.
    We have been on the internet looking for solutions including making sure that the box it ticked in IE8 which allows 3rd part add ons. And also looked in add on manager, but the Smart web add on does not appear on the list. In fact there are no add ons appearing?
    I would be very grateful for any assistance.
    Cheers

    In IE8 on the lowest toolbar, to the right hand side is a "tools" pull down. Click on it, then select "Explorer Bars", you should see one called "HP Smart Web Printing". If you do and it does not have a check by it, simply click on that option. An SWP toolbar should appear. If you do not have thswp line I would suspect an installation problem.

  • Windows 8.1 x64 Smart Search Outlook and OneNote 2013(x32) not returning results

    Is the 8.1 Smart Search([windows-key]-type)  supposed to return results from Outlook and/or OneNote?
    I am using Exchange Cached mode for Outlook if that matters.
    I have done the following to try and get results to show up:
    control panel...Indexing Options...Advanced...File Types...Index Properties and File Contents
    used indexing troubleshooter which found no problems
    control panel...Indexing Options...Advanced...Rebuild...
    used scanpst to scan my ost and make repairs.
    checked and unchecked Outlook and OneNote within index properties
    tried to go to C:\Users\[username]\AppData\Local\Microsoft\Outlook\username.ost properties...advanced...checked allow this file to have contents indexed. Except the next time i start outlook the check mark goes away.
    verified .pst , .ost and .pst files are all in the index service...file types... list
    Search within Outlook itself works just fine and quickly, but i would like to be able to search from the "Smart Search".  File name search is flawless. 
    If it isn't supported, why is it in the indexing options that clearly work for smart search settings because I also added a location for searching where file names search works just fine(although it does seem the contents of excel/word files are
    not being indexed, but the index might still be rebuilding)
    Any help would keep some hair on my head. 
    Thanks

    Hi,
    It seems that the smart search can't search the content in outlook and OneNote.
    blogs.technet.com/b/daanish/archive/2014/03/19/windows-8-101-smart-search.aspx
    The reason why Outlook and OneNote appears in the Index option tab is that Outlook and OneNote need the Windows search to help index the content in Outlook and OneNote, if we remote the outlook and onenote from Index Option tab, the search function in the
    Outlook and OneNote may not works.
    Also, smart search main focus on Settings , files, web Images, web Videos which we can select above the search box.  Another reason we suspect the design for this is the consideration for security, if we can search the emails in the smart search, that
    maybe some programs can access the content in Outlook and OneNote without authentication .
    Hope the information above help.
    Best Regards,
    Jason Zeng

  • Win 7 and E3000 router

    I have just bought an E3000 router when my old router died last week.  I am having two problems:
    1.  The data rate slows down after a period of time (long message trail elsewhere)
    2.  I cannot see everything on the network.
    I have several Win 7 computers, two win xp computers,  three NAS devices (linux based), and a printer sitting on the network, along with two switches to cope with all the traffic (not to mention iPods, iphones etc.)
    With my old router, I couold see everything plugged into the network from my main Win 7 computer. (note:  the win 7 network map does not always work, but the windows explorer window of the network always showed everything).
    With the E3000 router, I can only see 1 or 2 of the devices on the network.  If I reboot the router, then sometimes all of the devices appear on the windows explorer window (sometimes not)
    I am running a workgroup (not a domain) and i am not using win 7's homegroup because that will not help with the non-win 7 devices.
    Is there a setting that will help me to see all of the devices in Win 7 (either on the router or on the computers). I suspect it is a router issue as it worked with my old Zyxel router.
    ...steve

    Dudztgp:
    Sorry the colors of the link didn't show up well and I missed it.
    My issue is that the computers cannot see each other in windows explorer.  Most are wired connections and if you go to windows explorer and look at network you only see yourself most of the time - not the other computers or the NASes.  This makes sharing files difficult when you cannot see them. 
    I have central files sitting on the various NAS devices and i cannot see them in explorer. The Cisco Connect says everything is connected.
    Everything that should have internet access does, the issue is this side of the router.  It is almost as if the message that a computer is on the network is not being sent to the other computers - like the router is blocking it.  As I said before, the old router did not have this issue.
    thanks
    ...steve

  • Samsung Smart TV Remote and Standby Mode

    Hi All - A few months ago I got a Samsung Smart TV that came with a pretty nice remote. It really can control almost all aspects of the FiOS service, but there are a few commands I cannot figure out how to get it to send to the FiOS STB. 
    First off, when I power on the TV, the STB is still in Stanby mode. It asks for me to "Press Menu to Watch ...". I cannot figure out how to get the Samsung remote to send that command or to disable standby mode on the STB. There is no menu button on this remote that's not TV-specific. 
    Second, I can't figure out how to bring up the full guide using the remote. By pressing the "up" direction on the four-way button, I get some smaller version of a guide, but I would prefer to see the standard full screen guide. 
    Finally, is there a way to get to the On Demand and DVR menus using the Samsung remote? 
    Anway, that's the the scoop. Most other featuers (DVR, etc) work pretty well. 
    The remote I'm using is a RMCTPF1AP1 and the STB is running version 1.9.7 and build 19.45. It's a QIP7232. 
    Thanks in advance for any guidance on getting this working. 
    Dave

    I'm not sure if you are turning the STB off or if the idle timer is doing it.
    No reason to turn the STB off as it doesn't save any energy.
    So leaving it on would alleviate one issue.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Smart album - black and white only?

    hey,
    I convert images to b&w using ctrl-m
    is there a way to make a smart album that automatically has these images in them, as i like to go back over them and adjust contrast later
    cheers

    You could add a B&W keyword to each image and then build a smart album based on it.
    Sam

  • Imac not booting, Able to get to disk ulility with snow leopard disk.  Tap on had disk, not given choice to do anything.  Information list that smart is certified and partition map is us formatted.  How do I get mac to start up again?

    Imac not starting up, keep getting white screen.  Using snow leopard.  Able to get to disk utilities with snow leopard installation disk.  Tap on had disk, not given choice to certified disk or anything else.  Information on disk states that smart status is certified.  Partition map I formatted.  Also tried to restore from back up, but get error:  not enough disk space.  Tried to erase disk, but unable.  What do I do next to get mac to start up?

    Thank you. That's what I thought will need to happen.
    One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
    I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know?  It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
    Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
    Just trying to put a band-aid on it for another couple weeks.

  • Smart playlists - genre and rating, two questions

    I can't figure out a way to create a smart playlist that includes Rock and Alternative songs but only Rock and Alternative songs rated 4 or 5 stars. I can easily create a playlist that includes one genre and is limited to a star rating and I know I can create the list I want by first limiting my playlist to 4 or 5 stars and then subtracting genres but my library includes 51 Genres!
    Actually, I might be willing to create a playlist by subtracting 49 genres if I could then duplicate the list so I can create the second playlist I want; 4 and 5 star World and Latino songs. So, question #2 is, is there any way to duplicate a playlist?
    TIA,
    Peter

    Oh, you got it!!! I'd never noticed "Playlist" as a parameter in the smart playlists! Suddenly all kinds of possibilities open up! It did work the way you suggested but I decided to take a different tack. I created a 4-5 star "rock" playlist and a 4-5 star "alternative" playlist and then created a third smart playlist that includes the first two playlists! Now I can just continue creating smart playlists that include only songs I rate 4-5 stars in all of my 51 genres and create composite playlists to my heart's content! OK, I wouldn't do that. Once I get over 25 genres, it'd be easier to go back to the subtraction method. ; )
    Thanks for your help Diane! You're brilliant!
    Peter
    Message was edited by: petemay

Maybe you are looking for