Smart Wi-Fi error 2178 while editing parental controls - EA2700 router
Hi, I am seeing an "unexpected error 2178" while trying to edit the parental controls in Linksys Smart Wi-Fi. I have been editing the parental controls without any issues previously and wondering why this happened? My EA2700 router has the latest firmware 1.1.39.145204. I have tried other computers and get the same error code. I have also tried to disable the firewall, reboot the PC, router and modem. Linksys defines the troubleshooting error 2178 as "Only one edit pane can be opened at a time. The existing pane will be displayed" which makes little sense as there is only one standard pane anyway, and i don't open Smart Wi-Fi in other computers simultaneously. I think this error has something to do with the Linksys server. The expanded detail of the error message says: /jnap/parentalcontrol/SetParentalControlSettings -- Status: 200 OK Content-Type: application/json; charset=utf-8 Connection: close Content-Length: 38 Date: Sat, 29 Jun 2013 02:31:02 GMT Server: lighttpd/1.4.28
Other editing functions in Smart Wi-Fi works normally, only the parental controls. The router also works fine. Help on this is much appreciated!
Is there any representative from Cisco that reads this forum? I certainly would like Cisco to check their server for any bug that is causing this error! This is getting really frustating with no support from Cisco at all. Big regret buying this router!!
Similar Messages
-
WIJ20005 error occurred while editing the WebI document
Hello Everyone,
An error occurred while editing the WebIntelligence document.
The error don't occur when you run again.
Do you know the cause of this problem?
Please give me advice how to investigate.
Error message is as follows:
The current request has returned corrupted data. Contact your administrator (ERR WIJ 20005)
Version: 12.4.4.1557
Application server:
http://xxx.xxx.xxx.xxx:80/AnalyticalReporting/cdzisapi.wis
Stack trace:
java.lang.NullPointerException
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.reArrange(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneScrollLayout.calculateTabRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneLayout.calculateLayoutInfo(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentLayout(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.access$1900(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$f_.componentAdded(Unknouwn Source)
at java.awt.Container.processContainerEvent(Unknouwn Source)
at java.awt.Container.processEvent(Unknouwn Source)
at java.awt.Component.dispatchEventImpl(Unknouwn Source)
at java.awt.Container.dispatchEventImpl(Unknouwn Source)
at java.awt.Component.dispatchEvent(Unknouwn Source)
at java.awt.Container.addImple(Unknouwn Source)
at javax.swing.JTabbedPane.insertTab(Unknouwn Source)
at com.jidesoft.swing.JideTabbedPane.insertTab(Unknouwn Source)
at javax.swing.JTabbedPane.addTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.createUniversTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.init(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.addQueryTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.updateWithDP(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.createQueryTabs(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.load(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient2(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient(Unknouwn Source)
at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknouwn Source)
at java.lang.Therad.run(Unknouwn Source)
Environment:
[Server]
- Windows 2008 R2 Enterprise
- BOXI3.1 FP4.4 (IIS)
[Client]
- Windows7 SP1
- IE8
- JRE6 Update21
Regards,
MayumiHi, Yuvraj
Thank you for advice.
>What is the default editing tool set in Prefererences --> WebIntelligence?
>Do you get issue with Interactive mode?
>
>If Advanced mode, have you tried uninstalling and re-installing Java
>and check?
It's Advanced mode.
This error occur sometimes.
And if you re-run after an error occurs, the error does not occur.
So, I guess this error has affected the Java cache file, not the Java software.
How do I check what Java cache is corrupted.
>How many reports are giving this issue?
This error occurs in various reports, but I din't know the number of reports.
>Is this issue coming on all machines or single machine?
This error has occurred in several machine.
>Do you face a similar issue when using Webi Rich Client?
This error occur sometimes, and I usually not use Webi Rich Client.
Try to check, but be difficult.
Regards,
Mayumi -
How to enable and edit parental control in mac OS X programmatically
I want to create an application for editing Parental Control settings. Application will be running in background and it will get the command from server. On receiving the commands it will change the setting of parental control. Can any one tell me how to achieve this. I want the information like, whether this is allowed by apple or not, if allowed which framework/API's to use. I want to do basically web content and app filtering.
Up!
I am very interesting in this case too! -
Dump: Parameter error raised while editing Master catalog
Hi all,
I need some help.
While I am trying to edit the master catalog I am getting a dump error: Exception condition "PARAMETERS_ERROR" raised. The moment when I clicked on the edit button I am getting this dump.
I could see the field "operation" is showing as Undefined in the table /CCM/D_CTLG.
Could you please help me?
Dump details:
Error analysis
A RAISE statement in the program "SAPLSYGU" raised the exception
condition "PARAMETERS_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Errors in passing parameters
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLSYGU" or "LSYGUU03"
"GUID_CONVERT"
or
"SAPLSYGU" "PARAMETERS_ERROR"
or
"SAPMHTTP " "PARAMETERS_ERROR".
Information on where terminated
The termination occurred in the ABAP program "SAPLSYGU" in "GUID_CONVERT".
The main program was "SAPMHTTP ".
The termination occurred in line 119 of the source code of the (Include)
program "LSYGUU03"
of the source code of program "LSYGUU03" (when calling the editor 1190).
Line SourceCde
89 map22to16a 12 09 gc_map__345678.
90 map22to16a 13 10 gc_map345678__.
91 map22to16b 14 10 11 gc_map5678__34.
92 map22to16b 15 11 12 gc_map78__3456.
93 map22to16a 16 12 gc_map__345678.
94 map22to16a 17 13 gc_map345678__.
95 map22to16b 18 13 14 gc_map5678__34.
96 map22to16b 19 14 15 gc_map78__3456.
97 map22to16a 20 15 gc_map__345678.
98 map22to16a 21 16 gc_map345678__.
99 map22to16a 22 16 gc_map5678__34.
100 lv_g16x = lv_g16.
101 ev_guid_x16 = lv_g16x-x.
102 ev_guid_c32 = ev_guid_x16.
103
104
105 * conversion x16 or c32 to c22 if requested
106 *** iv_uuid_x16 (wins) or iv_uuid_c32 have to be filled with valid guid!
107 ELSE. "Y9CKxxxxxx
108 * elseif ev_guid_c22 is requested. "Y9CKxxxxxx
109 IF NOT iv_guid_x16 IS INITIAL.
110 lv_g16x-x = iv_guid_x16.
111 ev_guid_x16 = iv_guid_x16. "Y9CKxxxxxx
112 ev_guid_c32 = iv_guid_x16. "Y9CKxxxxxx
113 ELSEIF NOT iv_guid_c32 IS INITIAL.
114 lv_g16x-x = iv_guid_c32.
115 ev_guid_x16 = iv_guid_c32. "Y9CKxxxxxx
116 ev_guid_c32 = iv_guid_c32. "Y9CKxxxxxx
117 ELSE.
118 * no parameter at all provided ... "Y9CKxxxxxx
>>>>> RAISE parameters_error.
120 ENDIF.
121
122 IF ev_guid_c22 IS REQUESTED. "Y9CKxxxxxx
123 lv_g16 = lv_g16x.
124 ASSIGN lv_xofs TO <lv_xofs> TYPE 'b'.
125 map16to22a 01 01 fc gc_base345678__.
126 map16to22b 02 01 03 02 f0 gc_base5678__34.
127 map16to22b 03 02 0f 03 c0 gc_base78__3456.
128 map16to22a 04 03 3f gc_base__345678.
129 map16to22a 05 04 fc gc_base345678__.
130 map16to22b 06 04 03 05 f0 gc_base5678__34.
131 map16to22b 07 05 0f 06 c0 gc_base78__3456.
132 map16to22a 08 06 3f gc_base__345678.
133 map16to22a 09 07 fc gc_base345678__.
134 map16to22b 10 07 03 08 f0 gc_base5678__34.
135 map16to22b 11 08 0f 09 c0 gc_base78__3456.
136 map16to22a 12 09 3f gc_base__345678.
137 map16to22a 13 10 fc gc_base345678__.
138 map16to22b 14 10 03 11 f0 gc_base5678__34.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 1
SY-TABIX 1
SY-DBCNT 0
SY-FDPOS 2
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE HTTP Control
SY-MSGTY E
SY-MSGID /CCM/COMMON_DB_EX
SY-MSGNO 010
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4Deal all,
Any help would be appreciated.
It seems like master catalog got locked. When I tried to map few supplier catalog to master catalog, I could see the message "Master catalog is locked" in SLG1.
I noticed two things which could be a reason:
1. There are two entries for the master catalog in the
table: /CCM/D_CTLG_REQ. Two versions are there 109 and 110. For the
version 109, field REQ_SENDER is showing the value FILE UPLOAD. Seems
like the master catalog is locked.
2. In the table /CCM/D_CTLG, for the version 109 the value for the
field Operation is showing as blank (undefined)
In SLG1 - when we tried to upload data in other supplier catalogs, we
are getting the message "Master catalog is locked".
I ran the report /CCM/CLEANUP_CATALOG to unlock the master catalog. But
it is not unlocking the catalog.
Also I ran the report: /CCM/CLEANUP_UPDATE_STATUS which changed the
status of the catalog from 03 to 05 in the table: /CCM/D_UPD_STATE
Please advise.
Thanks. -
Font Error Message While Editing a PDF File with Acrobat XI Pro
Hello,
I have Acrobat XI Pro running on Windows 8.1
I scanned a PDF File and then went to "Tools - Text Recognition - In This File - Edit - OutPutStyle ClearScan etc etc" and got the file into "Edit Mode".
When I replace a "number/digit", the replacement digit font is "very small" and there is a "Yellow Triangle" error message which says the following.
"The Original Font Fd 3168 is not available or can't be used in editing. Acrobat is using the font "Minion Pro" font in its place.
Anybody know how to overcome this error message/problem OR alternatively how do I change the FONT of the whole page to some other Font?
Also how do I find a "similar or equivalent font" for Fd 3168 font that Adobe Acrobat says, is not available.
TIAHi Bill. Thanks for replying.
Unfortunately, I don't have the option of using the original DOCX file. The author lost it, leaving only the pdf around
I'm using AA XI 11.0.06. Upgraded this morning. That's running on Windows 7 Ultimate 64.
I get the boundary boxes by clicking on the 'edit text and images' tool, and they appear. Or don't in this case
I only need to change a few characters in the file. However, even just opening up the file in AA and then saving, the "A = " "text" gets deleted.
Could it perhaps be something to do with embedded or missing maths fonts on my machine? I mean, I don't get any warnings, just can't do anything with the A and AB italic bold text.
Thanks!
-- gyre -- -
Error message while editing a hierarchy using the Web UI
Hi everybody,
I´m testing the MDS with SQL Server 2012
When I´m editing hierarchies with the Web UI, for instance, draging and droping one item into another category, I´m getting the following error message:
The item is correctly
reassigned to the new category but the users are not happy when they recieve this kind of error messages. My task is to determine if this is a known bug or a problem with my settings.
This is the complete error message:
"System.NullReferenceException: [Arg_NullReferenceException]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.0.20125.00&File=mscorlib.dll&Key=Arg_NullReferenceException
at Microsoft.MasterDataServices.Client.View.UserControls.EntityMembersDataForm.IsCurrentMemberReadonly()
at Microsoft.MasterDataServices.Client.View.UserControls.EntityMembersDataForm.UpdateStaticFields()
at Microsoft.MasterDataServices.Client.View.UserControls.EntityMembersDataForm.MemberDataForm_ContentLoaded(Object sender, DataFormContentLoadEventArgs e)
at System.Windows.Controls.DataForm.OnContentLoaded(DataFormContentLoadEventArgs e)
at System.Windows.Controls.DataForm.OnContentRootElementLoaded(Object sender, RoutedEventArgs e)
at MS.Internal.CoreInvokeHandler.InvokeEventHandler(UInt32 typeIndex, Delegate handlerDelegate, Object sender, Object args)
at MS.Internal.JoltHelper.FireEvent(IntPtr unmanagedObj, IntPtr unmanagedObjArgs, Int32 argsTypeIndex, Int32 actualArgsTypeIndex, String eventName, UInt32 flags)"
Any help will be appreciated
Im using IE 9
SQL Server Version Detail:
Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) Oct 25 2013 19:04:40 Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)How did you load it into iDVD?
The recommended way is to
1) in iMovie, use the Share menu to SHARE/MEDIA BROWSER in Large Size.
2) Open the Media Browser in iDVD (at lower right) and drag in the movie you just shared.
3) Set up any menus and such and burn your DVD.
Is that what you did? -
Error meassage while editing PO in ME22N.
Dear Gurus,
Please suggest what can be done in the following scenario .
1. User craeted Purchase Requisition and saved it.
2. While creating Purcahse Order, even though the PR was nor released, user put the PR no in PO.
as the system was throwing error meassage that the PR has not been released, User put PO on hold.
3.Now, PR has been released.
But, The error meassage in Me22n,(PR has not been released) is still appearing.
Please help.....HI,
yes you have to change your PO layout for PR field is it will be optional for you
check following
[http://www.sapfunctional.com/MM/Mandatory/Index.htm]
Regards
Kailas Ugale -
Getting an error message while editing RED .r3d footage.
Hi All,
I have been working on a music video that was shot on a RED and having some problems and I'm not sure if it has to do with the file types or not. Everything was working well, almost without a hitch, until I had about 30 seconds of footage edited.
Then after effects would crash on loading the file without a log, or it would crash in any project (even a blank one) after a minute or so, with this message:
Last log message was: <140735165743488> <ae.blitpipe> <2> Making New Context
I have no idea what to do from here, our deadline is sunday and I have a lot of keying and masking to do.
Please help me troubleshoot this, I have a macbook pro 15 inch with a retina display.In finder use the Go menu and hold down the Option key to reveal the Library. You can also open up preferences and click Reveal Preferences in Finder at the bottom of the General page. Another option is to hold down the Alt/Option + Ctrl/Cmnd + Shift When you launch AE and it will give you the option to delete your preferences file. I'm replying to this post from my iPhone, I'm not really sure about the shift key. Give it a try with, and if that doesn't work without.
-
A Critical error encountered while loading webpage.
Was running 2.1.51 and when browsing to the status link while logged in to the web gui I got a blank web page with the following text:
A Critical error encountered while loading webpage.
Reboot router - log back in - can go anywhere except the status page -- get same error page
made the mistake of downloading and upgrading firmware to 2.1.71 = upgrade completed successfully = presented with the new login screen confirming that the box is running the new code -- now when I log in - I don't get in rather the previous error page - and cant get anywhere.
A Critical error encountered while loading webpage.
the url is https://192.168.75.1/scgi-bin/platform.cgi but it doesn't load only displays the error.
could someone share another valid management url for the box so I can at least try to get in somewhere before attempting to factory reset this POS ;-(
thanks.Thanks for the response. Based on the number of crickets that I heard after asking the question, I did indeed factory reset the box. Luckily I had a backup of the config so it wasn't too painful to restore.
I beleive the root cause co-incided with the expiration of the trend micro web protection gateway service.
For whatever reason, I did not receive any notification that the service was to expire but the error experienced was noticed just two days after the subscription expired... I had successfully logged in without issue and was able to view the status tab only a week earlier.
be sure to pay the cisco tax on time or they'll lock you out of your box was the lesson learned... -
Smart DNS and BT Parental Controls
I wish to have parental controls turned on, but is there any way to allow Smart DNS to get through?
BT Parental Controls seem to block any DNS other than the BT DNS servers, but is there any way I can allow my Smart DNS service through?
http://en.wikipedia.org/wiki/Smart_DNS_proxy_server
Many thanks for any help.OnFire wrote:
I wish to have parental controls turned on, but is there any way to allow Smart DNS to get through?
BT Parental Controls seem to block any DNS other than the BT DNS servers, but is there any way I can allow my Smart DNS service through?
No, its not possible. BT have done it that way to ensure that people cannot bypass the Parental Controls by using different DNS servers.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
ITunes can't access shared library when Vista parental controls are on
I started a thread back on March 1 2008, but it got archived before it could be answered, see:
http://discussions.apple.com/thread.jspa?threadID=1420673&tstart=0
I'm using 64 bit Vista with iTunes version of 8.0.2.20, but I don't believe this issue has anything to do with the 64 bit versus 32 bit iTunes versions.
The exact message is:
"The shared library "libraryname" is not responding. (-39)
Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689."
But if I turn off Parental Controls, the shared library is accessible, it all works fine. This has nothing to do with the iTunes store (and potential web site blocking), I just want to allow shared library access while leaving parental controls on.
Any ideas?This question has been around for almost two years now with no answer...very frustrating and disappointing that no one from Apple can step in and assist. I have set up the port number on my firewalls, both Windows and McAfee, as per the iTunes message and it still does not work...so I am now at a loss.
Turn off parental conrols and it all works perfectly...turn it on and library is visible but not accessible...PLEASE can someone help with this!!!
Thanks. -
Parental Controls on WRT1900AC
Hooked this up and love the speed boost at home. Question is: every review said there was an option to set time frames and time limits on devices under Parental Controls. This was one of my main reasons for getting it. Unfortunately it looks like there is just an on/off switch. Am I missing something? If not will this be coming in an update?? If not can you please add it to your list?!
Thanks!To set time frames and time limits on devices under Parental Controls, you need to access your Linksys Smart Wifi Account then click and enable Parental Control. After that, select the device that you want to restrict access from the Restrict Internet access on list and click "Specific Times". Here's how to do that: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=25627
-
Video Furnace: Failed while creating player controls...
I need some help figuring out how to get Video Furnace to work on my computer. It had run very easily before; I was on campus, and I clicked on the icon, it came up, and played smoothly, but I can't get it to work any longer. It keeps saying: The Audio device is unavailable or busy. Playback will continue without audio. After that message, Another error message pops up saying: Error, Failed while creating player controls. Then the Instream quits.
I used my roommate's computer to access the video I was supposed to watch and ir worked fine on hers; she has the same exact computer as me, and I was in the same room, only a couple of feet away. I was thinking maybe I messed up my audio settings or soemthing? I don't know what to do. Anyone have any suggestions?
Thanks.Kumar
Instead of creating a player and a processor from one datasource you can use javax.media.control.FrameGrabbingControl to grab frames from the video stream. To do this you need the following code
* grabs a frame's buffer from the web cam / device
* @returns A frames buffer
public Buffer grabFrameBuffer ( )
if ( player != null )
FrameGrabbingControl fgc = (FrameGrabbingControl)player.getControl ( "javax.media.control.FrameGrabbingControl" );
if ( fgc != null )
return ( fgc.grabFrame() );
else
System.err.println ("Error : FrameGrabbingControl is null");
return ( null );
else
System.err.println ("Error : Player is null");
return ( null );
* grabs a frame's buffer, as an image, from the web cam / device
* @returns A frames buffer as an image
public Image grabFrameImage ( )
Buffer buffer = grabFrameBuffer();
if ( buffer != null )
// Convert it to an image
BufferToImage btoi = new BufferToImage ( (VideoFormat)buffer.getFormat() );
if ( btoi != null )
Image image = btoi.createImage ( buffer );
if ( image != null )
return ( image );
else
System.err.println ("Error : BufferToImage cannot convert buffer");
return ( null );
else
System.err.println ("Error : cannot create BufferToImage instance");
return ( null );
else
System.out.println ("Error : Buffer grabbed is null");
return ( null );
The first method takes frame grabbing control of your player which you have already created from the datasource of the camera and it grabs a frame, returns it as a buffer, then calls the second methos which converts the buffer to an image.
It is very straight forward and I was kicking myself when I figured you could do it this way - I had been weeks playing around with the player and processor from one datasource.
hope this helps! -
Wifi/dsl router parental control
I am looking for a wifi/dsl router that will allow parental control for more than 5 users. i want to limit people to one website. if i have to have a separate dsl modem that is all right but would prefer an all in one solution.
As far as I know, the wireless gateways such as ADSL modem/routers for Linksys can set up Parental Control up to 5 devices only and can block up to 8 URLs either through the web-based set up page or through the Cisco Connect software. If suggest, you get an EA series router and install Smart Wifi firmware because you can enable Parental Control and limit URLs for more than 5 devices. So you will need a separate modem then to set it up for internet connection. You refer to the articles below also I found from the knowledge base site of Linksys.
Setting up parental controls to block specific websites
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=25495
Parental Controls can be set up for a total of five (5) computers or devices and can block up to eight (8) URLs only.
Linksys Smart Wi-Fi Frequently Asked Questions
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=34b41fc5289f4f4ba788623bf7247a73_Cisco_Connect_Clo...
How many sites can be blocked per device in the Block specific sites of the Parental Controls feature at most?
You will be able to block up to 10 sites per device.
Overview of the Parental Controls Tool in Linksys Smart Wi-Fi
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=25643
As for EA series models, you can visit their website http://www.support.linksys.com -
Error while editing a page in Oracle Composer
While editing a page on the remote server using Oracle Composer I am getting the following error:
Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.1.2.v20101206-r8635): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS].
Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'; remaining name 'webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS].
Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'; remaining name 'webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'
Any pointers would be helpfulHi,
I think, Package ZBI_NEW is a custom development package: probably someone else already transported the application component hierarchy and assigned this package...try to change this. Chk with SE80 > package > ZBI_NEW,If it is not there,create it.
But the normal practice is change/Edit DSO in DEV-->Quality , then transport to Production.(SE80
In the drop down, look for Packages,below it type ZBI_* and hit Open.If you don't see ZBI_NEW, then ask BASIS to Create (DEV)and import that Package to QAS->Production)
Regards
CSM Reddy
Maybe you are looking for
-
What kind of cables do I need to hook up the mac mini and stereo speakers
I
-
How to rebuild index on a table in a faster way
Hi All, We have using Oracle 9.2.0.3 On weekly basis we are loading around 20-30 million of data into a table using sqlloader. Before loading the data into the table, we are dropping all the indexes adn rebuilding the same once done. There are 6 inde
-
How to adjust width of an individual popup menu cell?
Hi, I have set up a horizontal popup menu which is too long. I want to adjust the width of individual cells that don't have long text, but the program just takes the widest text and creates all the cells the same width. Is there a way to place a t
-
Hi everyone. I have tried everything to uninstall iTunes so I can update it, even downloaded and paid for a suggest program to fix it and nothing (quick annoyed at that). I was trying to follow the steps that have been recommended many times before (
-
Erron in recording pp03 T.code
Hi experts, when i am recording the pp03 T.code , In the third screen ( Address Infotype ). It is giving the error like " location is not linked to structure Correctly".. Thanks & regards. Dattu M