Smart Wifi iOS App - MAC Filtering defaults to DENY!

So, the issue I'm having is pretty simple and it's an inherent design issue in the iOS app because it doesn't happen with the web inteface for my router. I have an EA6500 router and when using the iOS app with an iPhone5s, once you "add a device" to the MAC filtering list it automatically turns off the MAC Filtering when the new device is added. Then when you turn the filtering back ON, it automatically defaults to "DENY" thus kicking all wireless devices from the router, including the iPhone!!!!!
So I have to go to the router in the basement with my laptop and connect to it with an Ethernet cable to simply change the checkbox to say "ALLOW" devices instead of "DENY" devices. PLEASE FIX THIS ASAP!!!! I use this feature at least once a week and it's a pain in the A$$ when you have to go to use a laptop each time you want to modify the filtered list.
Thanks!
My devices:
EA6500 Smart Wi-Fi Dual-Band AC Router with Gigabit and 2x USB
Firmware version: 1.1.28 (Build 146072)
iPhone5s
iOS 7.0.4
Linksys Smart Wi-Fi 1.4 149827 (app)

There could be a problem with the app perhaps. You can uninstall the app and reinstall it. That could help.

Similar Messages

Linksys Smart Wifi now supports Mac OS 10.8 Mountain Lion

You can download the software here.
http://homesupport.cisco.com/en-us/support/ccc
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Make sure your Mac qualifies to run Mountain Lion > Apple - Upgrade your Mac to OS X Mountain Lion.
Disable anti virus software then try resuming the download.
Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading including Mountain Lion.
Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

WiFi MBSSID and MAC filtering

Dear Sirs!
I use Cisco AiroNet and have multissid WiFI
What can I filter users by MAC address only on specific SSID?
Thanks!

Mac address-table xxxx.xxxx.xxxx static
vlan ### drop
In this sring, xxxx.xxxx.xxxx it is allowed MAC?
and vlan ### drop it is entered in global config?
Thanks!

HT201304 Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?

Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?

you might be able to block it if the app uses Internet access
and depending on your wireless you might be able to block a specific user
accessing the backend host that the app uses
some firewalls offer application filtering but I'm not aware of any that work with ios apps

I bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple

i bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
SMC Version (system): 1.47f2
Serial Number (system): W8******66D
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>

Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(121877)

PDF generated in iOS app opens iOS adobe but is blank in Windows and Mac adobe

I generated a PDF in an iOS app called iThoughts and I am able to export directly to iOS Adobe, or e-mail the PDF. When I export directly to Adobe the PDF opens fine in the Adobe iOS app, when I try to open the PDF on a windows machine or Mac machine the page is blank, all white. When I click the preview on Gmail I see the PDF fine. When I open the PDF in my mac preview desktop app it works fine. I did try to save from export from preview and this did not work, same results. When I open the PDF in iOS from the email it works fine also. The iThoughts generated PDF mind-map in this instance is very large. When I generated a branch of the map it works fine. If the map is smaller it works fine. This is a single page PDF. When I had notes on the same mind map the PDF was two pages and the only thing visible was page 2 with the notes on it, not map. I am going to send the developer of the iThoughts app an e-mail but I thought this would be a better place since I can open the PDF in my iOS app but not on a desktop program. I have done this with iOS 6 and now with iOS 7 with the same results.

Thank you very much. Is this the case for Adobe pro also? I am using Adobe Pro at work and it doesn't work either.
Are there any work arounds to be able to view / print / open in Adobe pro to be able to use the search funciton? That was my point of creating one map so we can search one page with all the settings as listed on the attached PDF. I am glad, but seems odd I can view and search this document on my iPad iOS version of Adobe reader. Thank you for this option at least. I guess this will push getting more iPads at work, LOL.
Thanks again for your time and I hope to hear of some work around to be able to search this larget page PDF besides cutting it into 2 pages.

Developing an iOS app on Windows and get error 90161 on upload from Mac

Hello,
I have developed an AIR for iOS app in Flash CC 2014 on Windows. I use MacinCloud managed server for uploading .ipa to store for testing. It is virtual server service with Mac OS. They have Application Loader pre-installed.
I made certificates [cer converted to p12] on Windows and installed provisional profile. I made another certificate on Mac and added it to provisional profile too.
I get error when trying to upload from Application Loader:
ERROR ITMS-90161: "Invalid Provisioning Profile. The provisioning profile included in the bundle com.xxx.yyy [Payload/yyy.app] is invalid. [Missing code-signing certificate.] For more information, visit the iOS Developer Portal."
Stuck here. Tried to add cert made on Mac. Flash doesn't like it and stops compilation.
Any help will be highly appreciated.

Unfortunately I have no experience with Apple Testflight, but I can show you how to host on your own server.
Create a .plist file on your server with the following data in it:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>items</key>
<array>
<dict>
<key>assets</key>
<array>
<dict>
<key>kind</key>
<string>software-package</string>
<key>url</key>
<string>http://yourserver.com/path/to/ipa</string>
</dict>
</array>
<key>metadata</key>
<dict>
<key>bundle-identifier</key>
<string>com.yourcompany.yourgame</string>
<key>bundle-version</key>
<string>current version of your app</string>
<key>kind</key>
<string>software</string>
<key>title</key>
<string>name of your app</string>
</dict>
</dict>
</array>
</dict>
</plist>
Then, on your server, make an HTML page with the following code in it:
<a href="itms-services://?action=download-manifest&url=http://yourserver.com/path/to/plist">click here to install<a>
Navigate to that page on your device, click the link, and it should work! (assuming the adhoc provisioning profile you built your app with contains permissions for your device)

Manually migrating to new Mac: how to move iOS Apps

I am doing a manual migration from my old Mac to my new Air.
I understand (I think) how to move my itunes Music Library).
However, I don’t know how to move all of my iOS apps (some of which are installed on my iPad and iPhone and some of which aren't).
Thanks for your help!

I'm no expert on the iTunes library situation, I'll leave that for others.
I can help on the Aperture move. There are two possible answers.
If you have a Managed Library (all the Masters are inside the library), the job is easy. Just go to Finder and drag and drop it to the new location.
If any of your Masters are "Referenced Masters" (that is they live outside the Aperture Library), then you still move the Library as above, but DO NOT USE FINDER TO MOVE THE MASTERS!
You MUST use Aperture's "Relocate Masters" function to do the move of the Masters. If you move them using Finder, Aperture gets all confused, and while it is possible to straighten the mess out, it's not fun.
Most people have a "Managed Library", so it's probably very simple.
To tell if you have "Referenced Masters", go into Browser and select 'Photos" in the Library Inspector, click on one image and select all images (Command-a).
Then choose "Locate Referenced Files..." in the File menu. If it says "No Referenced Files", you have your answer - it's a totally "Managed" Library, so drag and drop it.
If you have got Referenced Masters and need help, post back.
Hope this helps
John

Is there a section in the Mac App Store, that is for apps that sync across their respective iOS apps?

Is there a section in the Mac App Store, that is for apps that sync across their respective iOS apps?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
I have been using the Mac App Store from day one and have never seen this area of which you speak. There are a number of apps where the developer has created both a Mac version and an iOS version, but I haven't a clue how you would do a search of the Mac App Store to find them.

Important: A Mac is required to produce iOS apps for the Apple App Store

Another user asked if a Mac was required. This is a sufficiently important topic, and I'm repeating my answer here for that reason.
My equipment in this world: a Windows 7 PC and an iPod Touch 4. So, I asked myself the same question.
I read iOS Development With Flash, by Dolce (Visual Blueprint publishing). The book is about a year old, so some screenshots are out-of-date, because Apple changed things since the publishing. The book is excellent, though. It walks you through the entire process of creating an iOS app, especially for Windows users.
Here's the bottom line:
- Using Windows, you can do the development using Flash CS5.5.
- Using Windows,you can generate the certificates, provisioning files, etc. (it's not simple, but it's not hard).
- You have to have an iPhone, iPod Touch, or iPad to test your app on.
- Using Windows, you can use iTunes to transfer your app file from your PC to your device for testing.
- Using Windows, you can use iTunesConnect (the website that lets you specify all your app details to Apple for their App Store).
- YOU CANNOT UPLOAD YOUR APP FILE TO THE APP STORE WITHOUT A MAC!!!
Previously, Apple allowed you to upload your app using iTunesConnect, the website. THEY REMOVED THAT CAPABILITY.
Now, you must use Apple's Application Uploader (or whatever it's called) to upload your app file to the App Store (and, remember that Apple has to approve your app before they put it on their App Store).
The only way to get the Application Uploader, if I understand correctly, is to install the Apple Developer SDK. And, you can only install that SDK on a Mac.
So, this seems to be the last-ditch effort by Apple to force you to have a Mac to send your final app file to them for review and hopeful publishing on the the App Store.
If anyone knows otherwise, please correct this info.

In my previous thread you said
I didn't mean the P12 file that Flash uses. There are developer and distribution certificates that get installed into Keychain Access on the Mac, that the various developer tools can directly read. My suspicion is that Application Loader reads those, as part of the process of seeing if you're entitled to be uploading anything to that account.
Is there any clarification on this? Because in this guide it seems to suggest doing the signing up on the PC, and then using something called openSSL, also at the bottom there is a comment which says...
Just a note that it’s possible that this tutorial needs to be updated to accomodate new requirements from Apple. I was able to gain access to a Mac and I can now install the test app just fine. I followed this tutorial word for word once then again from scratch and was never able to successfully install the app to my iPhone. I did notice that if I pull a certificate generated this way into Apple Keychain the option to export a key is not there. So that’s likely where the problem lies.
So at a very rough (I'm new to AIR and iOS) guess I'm thinking sign up on the Mac, test on the iPhone via itunes again on the mac, and when the game is done, submit via the mac, but I can develop via the Flash CS5.5/AIR/Windows and create the necessary files which I will then have to port across to the Mac for any kind of submission/testing (on an actual device) ??

Is there any mac/iOS app or feature I can use to alert me every five minutes?

I need an app or a feature on Mac, iPhone, or iPad that will send me a push notification or some kind of alert every five minutes.
I would rather not set up a million calendar alerts or alarms, as I will have to be using this a lot.
It will need to run in the background, especially if it's an ios app.
I would rather not use an iOS app that makes noise but doesn't send a push notification.
An iOS app is preferred, but anything works.
System alternatives will be accepted as well.
And no, I cannot simply ask Siri to do it, as I have tried in the past, and she says she can't do alerts that frequent.
Thank you for the help!

You could do this using AppleScript on your Mac.
See: http://stackoverflow.com/questions/3718520/how-do-i-write-applescript-that-will- give-me-an-hourly-popup-alert for the basic code to do the repeating alert.
Combine it with this for a Notification: http://macosxautomation.com/mavericks/notifications/01.html
Quite simple really...

New at mac want to learn iOS App development, tried to install xCode from App Store it says upgrade to 10.8 or later req.

New at mac want to learn iOS App development, tried to install xCode from App Store it says upgrade to 10.8 or later req. P.S already tried updating to Mavericks OS X this laptop is not supported. guide me through the process

If you register as an Apple developer, you can download previous versions of XCode.
https://developer.apple.com/support/xcode/

Remote control of Mac via Flash iOS app

Hi all
I am a very trial-and-error Flash coder but have managed to create a (I think) pretty serviceable VJ system - see http://www.smashedupsoiree.com/magic-wall/
There are two Flash movies that run concurrently on the same Mac. One is the video content itself which is displayed by a projector; the other is the Controller movie which runs on the mac laptop screen. The two movies communicate by LocalConnection. I have had some success using VNC apps on an ipad which grabs the screen from the Mac and therefore enables this Controller movie to be effectively operated as a touch screen, portable interface. However there are latency issues with VNC - not what you need for a live performance tool!
I am considering instead developing the controller as a packaged-for-ios app to reduce the latency issues. If I do so, does anyone know how it will be able to control the flash movie running on the mac on the same network? (In the vein of these kinds of apps: http://mashable.com/2010/02/28/iphone-remote-control-apps/ )? I have read that Local Connections do not work in Packaged-for-iOS apps. Would I instead use Apple APIs? How is this done via Flash Actionscript? I would want to either control the Mac-based movie like a LocalConnection or even simulating keypresses would be fine, that I can then detect with the Mac Flash movie.
As I mentioned before, I'm no professional coder so the whole matter is a bit blurry to me! Any pointers would be much appreciated...
Gerred

teamviewer is a pretty big player also works across the Internet

Its possible to open an app from IOS on MAC?

I have a med app on iphone that i want to open on mac to study. since it have small letters and a lot of stuff, it would be much easier if i open it on mac.
So, its possible to open an app from IOS on MAC?

No. The iPhone and Mac are totally different hardware architecture. Software compiled for one will not run on the other.
Allan

How can I develop iOS and mac apps without a mac?

This is more of a suggustion to apple rather than a forum question. I am a novice developer and want to develop mac an ios apps. I am looking for a way to do this without spending $1000 on a mac. because it took me 9 months to save up for a ipad. any suggestions would be good but the best would be to get an apple rep. to see this. thanks!

No Apple reps here and sending feedback will be a waste of your time, Apple is not going to go to the expense of creating a Windows version of the SDK.
You are listing a MacBook on your profile, do you not have one? If you do you can use it to develop apps. If not, look for a used or refurbished (on the online Apple Store) Intel-based Mac Mini and work on it. If you have a monitor, mouse and keyboard they will work with it.

Smart Wifi iOS App - MAC Filtering defaults to DENY!

Similar Messages

Maybe you are looking for