Smartband is not recognized by Smart connect

Hi
I have 10inch tablet with Android 4.4.2 and BT 4.0. Tablet recognizes the smartband and connects, as well as the band vibrates due to the connection. Other BT devices work with the tablet as well.
However teh Smart Connect does not work. It recognizes headphones and my phone (connected to tablet) but when I establish the connection tablet-band, the Smart Connect does nothing

That's quite odd, have you downloaded Lifelog?
http://userguide.sonymobile.com/referrer.php?region=global-en&product=smartband-swr10#!Preparing-to-...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    iOS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • Phone not recognized and says connect to itunes

    iPhone 4s is not recognized by Windows 7, or itunes after update to itunes 10.7. Iphone screen shows usb cable and iTunes icon, saying connect to itunes. I have uninstalled and reinstalled, all itunes programs via the instructions on TS1538.
    Nothing is working.

    http://support.apple.com/kb/HT1808

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • USB Device Not Recognized when Iphone connected to PC

    Hello,
    Every time I connect my Iphone 4S to my PC I get the error "USB Device Not Recognized". I did not have this problem before. I tried uninstalling Itunes and all its components and reninstalling it, restaring my computer, restarting Iphone and I even reset all the setting on my Iphone. I connected my wife's Iphone 4 using the same cable and PC and connected and started syncing with Itunes right away. If anyone has any pointers on how to fix this problem, any help will be much appreciated.

    try reseting the phone
    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • Re: "USB device not recognized​." "The connection between your device and the desktop could not be establishe​d. Please check your setup and try again." Tungsten E2

    Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes.  I have checked out various online suggestions but then discovered that the only thing that seems to  work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities.  I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm!  Any suggestions? Thanks!
    Post relates to: Tungsten E2

    Hello!
    The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens. 
    Post relates to: Treo 650 (Unlocked GSM)

  • Iphone 4s not recognized after ipod connected

    I connected an ipod to itunes.  Then I tried to connect my iphone 4s and my iphone is no longer recognized by itunes.  I have tried rebooting my iphone - - deleting and reinstalling itunes, but nothing works.

    Can anyone please help? This community is not like it used to be...
    The worst part is, I cannot even do a restore since the device does not show in windows at all. I have even tried another computer and it is not showing up. At the very least, can someone tell me if they believe this is iPhone hardware related or iPhone software related?
    As I said, the iPhone was syncing just fine after the dock connector replacement. It was only after updating from ios 7.0 to 7.1 that the problem arose.
    Please any little bit of feedback is helpful.

  • USB device not recognized when I connect ipad to computer??

    I haven't had a need to connect it in quite some time, so I don't know what's going on, but my adapter is MIA at the moment, so I figured I'd just connect it to the computer to charge it, but when I plug it in, my computer won't recognize it    anyone have any suggestions as to how to fix this?

    Most USB ports n computers do not provide enough power to charge an iPad. You need to use the wall charger and plug that into a known good wall outlet.
    The iPad will not show up on your computer like a hard drive. Start iTunes on your computer and plug your iPad into the USB port on the computer. You should see the iPad recognized in iTunes.

  • Final Cut Not Recognizing Camera/Devices Connected Via FireWire

    I have a Macbook and a Macbook Pro and I'm having the exact same issue with both of them. I'm trying to capture DV footage into Final Cut Pro 5 via a Sony Digital Video Cassette Recorder GV-D1000 NTSC, I've also tried capturing into iMovie with the firewire device not being recognized there either.
    Device control is "FireWire NTSC Basic" and Capture/Input is "DV NTSC 48 khz" I've captured footage plenty of times and never had a problem until now. I've tried just about every audio/video setting there is including anamorphic as I saw suggested in a similar thread and nothing has changed. I've also tried different firewire cables, different devices including canon/sony and a panasonic cameras. When I connect a new device it shows "vtr ok" for a few seconds and then switches to "no communication". I've tried trashing my preferences and repairing permissions. I've updated quicktime/restarted the macs/unplugged the devices etc. I've also tried playing the tape on the sony box first and then opening FCP and attempting to capture, the footage stops playing and I get an error message that "video is not available". I'm capturing to a 500gb external harddrive that I've used before with no problems and is connected via usb. At one point it did allow me to start the capture now process, but it kept dropping a million frames and aborting, now it won't even let me get that far. I'm literally pulling my hair out, can some one PLEASE, PLEASE HELP ME??!!?

    Exactly what version of QT are you running now?...and FCP5.?
    Have you tried the Guiness solution yet?..shut everything down and unplug, wait 15 minutes, plug all back in, then turn on camera/deck first.
    Confirm that System Profiler recognizes the camera/deck and the deck is set in VTR mode (not camera mode), then open FCP.
    Could be a bad FW port (have you tried other ports on the mac?)
    Or, could be QT incompatibility...
    http://www.digitalrebellion.com/blog/cats/28/index2.html
    http://www.digitalrebellion.com/blog/posts/listof_quicktimedownloads.html
    K

  • Restored but still not recognizing 2 smart playlists previously stored

    I am having problems suddenly syncing my Nano which I have tried to solve by twice restoring it and then REsyncing. All playlists I have created previously synced just fine on all 3 of my iPods (1 of which is an iPhone). The problem I'm having ONLY is occuring on this Nano. Help!
    Here is message I get: "This smart playlist depends upon 1 or more playlists which cannot be found" and the caution symbol is displayed next to both SMART playlists in the Nano list of playlists in the DEVICE category.
    The caution symbol does NOT display next to those 2 SMART playlists in the "PLAYLISTS" category.
    These 2 SMARTplaylists contain items from both the MUSIC library and AUDIOBOOKS library and PODCASTS library in the LIBRARY category list and no "caution" symbol is displayed next to ANY other item than these 2 "SMARTplaylists" in the DEVICES category for this particular Nano.
    I have 2 other devices (iPhone and video iPod) and they have no problems whatsoever syncing fine with all these playlists (including the SMARTplaylists) and I HAVE ALREADY RESTORED THIS NANO 2 TIMES and that has not solved the problem.
    Help???!!!!

    Apparently Audible has a bug right now in their software that talks to iTunes. They informed me about this today thus is the root of the problem. They "are addressing it".

  • Canon 40D not recognized, won't connect with my Mac Air running Lion 10.7.3

    I'm not sure what is wrong. I can't transfer picture or tether my camera to my laptop. When I connect the usb cable, camera says busy for few seconds then returns to normal. I installed latest EOS utility and DPP. 

    you may be able to see your pictures using the Image Capture (a program which is already installed on Mac, you will find it into Applications)

  • Computer not recognizing Itouch when connected

    When connected through USB, the Itouch does not appear in the Itunes window- I restarted computer, tried new USB, tried new port, confirmed that all upgrades were installed.  please advise!

    1. There's no such thing as an iTouch.
    2. iSync is for third-party devices. iPods do everything through iTunes.

  • Win 7-64 Bit not recognizing bt500 Bluetooth connection - Linux "Isadora" sees it

    None of my 3 Win 7 (one is 32 bit - Other two are 64 Bit) computers will find (discover) the bt500 Bluetooth on my Photosmart C5580 all-in-one printer. Linux "Isadora" recognized it in an instant, showing the printer's IP address. Security setting is set to "Low" and "View by All" is set in "Setup." Even manually typing in IP address does not seem to work. Am I missing something here?

    Far be it from us to argue with success!  Congrats on finding a solution.  :-)
    WyreNut 
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Fast backup on FireWire not recognized when network connected

    I have a MacBook Pro that I've Time Machine backed up on a FireWire drive. I've now connected that FireWire drive to my Mac-Mini that I use as a home server so I can do network backups.
    I've shared the drive on my home network, Time Machine on the MacBook Pro recognizes the drive but the backup I made when connected directly is no longer recognized.
    How do I get TM to make use of the existing backup? The alternative will be delete everything and start a new TM backup over the network which could take days.

    Neither one recognizes it....The playbook is the only thing that acknowledges that it is plugged in.  I have re-installed the blackberry software on the mac and still nothing!?  I thought it was weird that the iMac didn't even recognize it being plugged in.  I am going downlaod the DM for my mac laptop and see if I can get it to recognize it. 

Maybe you are looking for