Smartband talk not detected , can't pair

My smartband talk disconnected yesterday, aound the time for SmartBand App update. Now it does't pair with my phone. App says "read error. try again." I uninstalled the app and installed again. Not connecting. Used SmartConnect app to detect bluetooth device. Can't find SWR30 as a bluetooth device when it is nearby the phone.
Please help.

I tried to on/off BT a few times and scan for devices. Also - rebooted both the phone and the smartband before do that things.

Similar Messages

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

Z30, sim card not detected

My Z30 just few months old, sim card not detect, can someone help? thanks a lot..

Hello,
Have you tested the SIM in another device? Have you tested another known-good SIM in this device? Is there an error message? Has it ever worked?
Let us know.

Smartband Talk sleepdetection still not working properly

I had a SWR-10 Smartband: great working device and sleep tracking was great also. I didn't mind starting sleepmode and setting it off every morning. Than there came a new Smartband the SWR-30: e-INK screen, watch-functionality, callfunctionalities, visual notifications and better sleepregistration, whoohaa.
Ouch: the sleepregistration doesn't work out of the box. An update is imminent... yes there it is. Oh, it's not really that good... sleeprecording doesn't start when it should, ends randomly while I'm sleeping and before I wake up. The problem is that the smart-alarm doesn't work when you are awake, so I sleep in on workdays and end up using my Z3 Tablet Compact as my alarmclock and for sleeprecording.
Yeah: new software but still no good, Sony: connect using PC-Companian tool and renew software... that doesn't work, Sony: sure it does, did it today with a customer and all is well now. (sleepregistration is working and it's daytime on the same day as the fix??). That's not possible and you are doing something wrong (!), after some time Sony admids that its not possible to use the toll with a Smartband Talk. Sony: send your device in for repairs. Yeah: returns after 2 weeks and has been repaired... well... still the same software, not even the newest firmware wich is available for some days now. How is that possible? Install new software: slightly, very slightly better sleeprecording but no alarms, worse BT connection (reset BT on Phone, reset Smartband to connect) and worse battery life.
Again contacting Sony (3 months now!) and being told to return device again for repair! That's utterly crap and unacceptable offcourse so now awaiting a new reaction. In my opinion: the device is a great watch and steptracker. Sleepfunction **bleep** and is not going to work untill Sony understands that they can't get automated sleepdetection reliably working, period. Expecting to get a refund after returning the device and not buying anymore devices from Sony until they have been used by others for several months. My early adaptor days with Sony products are over!
Now waiting for another answer from Sony: what to do with this unsatisfied customer, he wants to return and be refunded because the product doesn't do what it should do and as is advertized? I think everybody knows what the answer should be. So beware, it's a great device but it has one major flaw, sleeprecording **bleep**. Sony read the posts on this forum concerning this problems!

There is no problem with my phone, there's a problem with the automatic sleep function of the Smartband Talk. You should be working for Sony as they also don't know how to help me (joke)
I'm just ventilating my frustration with the device, or rather with the sleep functionality. But if you or anyone on this forum has a real idea how to make this work, be my guest.

Where i can register my new smartband talk for support?

i am registered my Z2 and walkman player on sony website. but i can`t find where i can registrated smartband talk...

It's currently not possible to register accessories in your account on sonymobile.com but you don't need to do that to get support.
But i added here that you also have SmartBand Talk but i'm not sure if you'll see it on account.sonymobile.com.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Windows 10 elitepad in Dock can not detect VGA monitor

Windows 10 will not detect my external monitor. I loaded Winbdow 10 on elitepad 1000 about 2 days ago. This is the first time I've tried to use my extenal monitor. My elitpad is in the elitpad docking station.  The tablet id also in the expansion Jacket.  Under windows 81. I was able to duplicate my tablet display on to the external monitor over the VGA jack in the dock. Now tablet can not detect the VGA monitor.      The monitor is an HP2065 using the HP provided VGA to DVI cable.   I've tried rebooting with the monitor diconnected and then adding plugin it in . I've run the detect monitor several times.   Any one got a solution. The new HP support page does not even list tablet as an option for display support. Thank you

            Ok, thats the procedure I was talking about earlier. I did that bios default factory reset just now. First the version 6 and earlier. It didn't work so I tried version 7 and later and that didn't work. I then tried version 6 and earlier again only this time pushed F10 more rapidly and got right in right when I got to the F5 and enter portion. Then I pushed F10 again to save the change and enter again to close. The PC didn't boot up the next screen like the test said it would. So I did it all again and spent some time reading what was on the bios pages but accidently pushed ESC as the bios menu suggested instead of enter to close out   . No boot up screen again. I did another hard shutdown and then unplugged the cord for 5 minutes and this time the PC stayed off when I plugged it back in. The bios are set to default but I cannot get it to start again in safe mode or boot up. So if the power supply is working properly, and the monitor worked in safe mode, then the video card must be good. right?
          So I'm editing from the night before, its Monday morning here in Wi. and I'm sorry to say that after leaving the PC unplugged all night that when I plugged it back in this morning, the dumb thing started again without pushing the  start button.  So the only thing doing a recovery on the bios accomplished was to prove that my the video card can run the monitor in safe mode which is a good thing I guess. Hope someone has an idea as to what else I can try.-------thanks

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

Smartband and Lifelog does not detect jogging

Hello,
Smartband and Lifelog does not detect jogging (does not distinguish walking and jogging/running).
For example - walking with speed 5.7Km/h and treadmill running with speed 9-10 km/h.
Smartband worn on left hand.

Hi,
As I understand, lifelog log your exercise as running if the pace is 2.5 steps/ second or above.
What are your thoughts about this forum? Let us know by doing this short survey.

How can I use Bluetooth it does not detect others iPhone

How can I use Bluetooth it does not detect others iPhone

The bluetooth functionality on the iPhone is limited. It's basically limited to audio devices (headsets, for instance), although certain apps allow greater functionality. Search the app store for "bluetooth share"

HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

See
http://support.apple.com/kb/TS4215

On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190

ITunes WILL NOT detect my iPhone 4 - Tried everything I can think of!

Hi everyone
I am in desperate need of some help.
I plugged my iPhone into my PC today and iTunes wouldn't detect it, no matter what I tried. All iTunes would do was freeze for 5 or so minutes and then return the error "iTunes cannot read the contents of this iPhone, please restore etc."
I have come across this error before but have gotten around it by restarting iTunes or unplugging and replugging in the iPhone. This time I couldn't get past the error.
So eventually I became frustrated with the fact and decided to restore my iPhone. BIG mistake as once it had restored it needed reactivation and iTunes still would not detect it no matter what I tried.
So I took it to my brothers PC, had him install iTunes (the same version as me, the latest 64bit version) and it had no problem detecting and reactivating the iPhone.
Then the problem became that I had my iPhone activated but my own iTunes would still not detect it so I've lost all my contacts/apps etc. without the possibility of restoring from the last backup.
So my iPhone, in it's current state is if it was just activated, completely empty otherwise.
Oddly enough, Windows has no issue detecting the iPhone with autorun popping up asking me to import photos etc. every time so this leads me to believe there's an underlying issue with iTunes which is weird as I have not changed my iTunes at all in the past week and had no issues syncing etc. a few days ago.
THINGS I'VE TRIED:
- Reinstalling iTunes (numerous times)
- Using different versions of iTunes
- The various different fixes found via Google
- 6 different USB ports
- 4 different USB cables
THINGS I FOUND WEIRD:
- Girlfriends 3GS doesn't get detected in iTunes either but Windows has no issue
- The fact it detected on another PC
Win7 Pro x64 and my rig is pretty high spec so I can't see there being an issue there.
Let me know if there's anything you need to know.
All suggestions welcome and appreciated.

I've had this issue before as well. I think it has to do with 64bit Win 7. Most times I would connect my iPhone to it, it would automatically load iTunes, but it would just freeze and do nothing. I've since reinstalled my OS to 32bit and don't seem to have as many problems.
You can try this... seemed to get it connected for me when I had issues. Not sure if this is how you attempted to fix it before, so I'll say it just in case.
Plug iPhone in and let it load iTunes. When it freezes...
Unplug phone, close iTunes. Open windows Services panel, and do the following in this order:
Stop the "iPod Service"
Stop the "Apple Mobile Device" service
Wait a few seconds, then Start the "Apple Mobile Device" service. Leave the other service stopped.
Plug in the iPhone. Hopefully works after this.

Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

# Question
Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
Java(TM) Platform SE 6 U24
Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device?

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.

Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2

Smartband talk not detected , can't pair

Similar Messages

Maybe you are looking for