SmartCard Login not function Server 2012

I try to login with the SmartCard on a server 2012 rdp-session. It looks like all function, i can select the SmartCard at the login and enter my pin. But after the rdp-window open and i see the login with user and password.
For a test i setup a new terminal-server 2012 with the same config in the same ad. On this server the login with the SmartCard function without any problems.
SmartCard driver is installed on both server.
What can be the problem that the first server not accept the SmartCard?

Hi,
Which version of RDP client you are using for RDP connection?
I suggest you to try latest version RDP client 8.0 or 8.1, and check whether the same issue persist. Kindly double check the .RDP file & the configuration for RDP client for checking “Local Resources” which will show checkboxes for enabling redirection.
Also try to check the issue with different client on the effected server.
Smart Card redirection is dependent on the installation of required software support. Certain infrastructures require Cryptographic Service Provider (CSP). In order for Smart Cards in the environment to work via RDP Smart Card redirection, CSP must be installed
on the server.
The smart card modules for the cryptographic service provider (CSP) maintain a smart card handle cache. When a terminal session is created by using a smart card, the server queries the cache to validate the smart card handle. However, the cache does not support
multiuser session environments very well. Therefore, if a user runs a smart card transaction, all other users who use a smart card in the logon process are blocked. (Quoted form below KB article). If you have not specify CSP then please try to specify CSP
with below link for try.
Specify a Cryptographic Service Provider (Server 2012)
Apart from this, there is Hotfix available (KB 2521923 \
KB 949538) for
server 2008 R2 which may be the issue might causing to stop responding the smart card for RDP connection. (Here providing you only for reference.)
Hope it helps!
Thanks.

Similar Messages

Rdp not working server 2012

Dear Sir,
i am having 3 rdp license. out of three only 2 user log in at same time. Help me how to solve the issue

Hi Lokesh,
Thank you for posting in Windows Server Forum.
Not only RDSH role, but if you want to have user access to more than 2 remote connection then you need to configure RD Licensing server first, activate that license server and then install your purchased RDS CAL (which you have buy-it seems you have RDS User
CAL) and then you can get to have your 3 user remote connection at same time.
You can refer following article to configure RDL Server.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope it helps to understand!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

WSUS server not seeing Server 2012 machines

We have WSUS 3.2.7600.226 running on a Windows Server 2003 R2 machine, which has been working fine with our wide range of client computers. We recently added our first 4 Server 2012 machines to our domain. Although they show up in browse lists across
the network, WSUS doesn't "see" them at all. They don't show up anywhere in the Computers list, and a search for any of them comes up empty.
If I apply our default GPO to these servers, they are required to use the WSUS as their update server. That causes them to get no updates.
What can I do to make these clients show up? Thanks in advance.

Hi,
Have you installed KB2828185? If no, please try to install it on the WSUS server.
For detailed information, please refer to the link below,
http://support.microsoft.com/kb/2828185
If issue persists, please post the windowsupdate.log of the client here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support

Install Virtual Guest Services option not updating Server 2012 Guests

Hi,
I'm using VMM 2012 SP1 Update Rollup 3 and Hyper-V 2012.
I have installed KB2908415 hotfix onto our Hyper-V clusters to resolve stability issues with CSVs. Installing this hotfix causes an update in Integration Tools to version 6.2.9200.20873.
If I shut down my virtual machine and use the manual option of "Install Virtual Guest Services" it completes successfully but the Integration Tools aren't upgraded on the virtual machine. This only happens with Server 2012 guest machines
(Windows 7 and Server 2008 R2 guest machines are updated successfully. I have tried refreshing the virtual machine in VMM so the Integration Tools version is displayed.
VMM mounts the iso from c:\windows\system32 onto the virtual machine but the install doesn't seem to start.
Has anyone managed to get this working?
Thanks,
Emma

I attempted to create a new VM and was met with the same error but I'm able to create a VM using Hyper-V manager.

Download Windows Server 2012 (not R2) evaluation copy

Hi,
If I try to download the windows server 2012 (not R2) evaluation copy from http://technet.microsoft.com/de-de/evalcenter/hh670538.aspx, I always get a Windows 8 ISO (9200.16384.WIN8_RTM.120725-1247_X64FRE_SERVER_EVAL_DE-DE-HRM_SSS_X64FREE_DE-DE_DV5.ISO)
Thats not that what I'm looking for. :-(
I need to do some compatibility checking for server 2012, therefore I need the ISO image to install on a server.
GReets
Micha

Hi Micha,
I checked the download link and the ISO file name. It should be OK. As Tim mentioned, would you please
let us confirm whether you had installed via this ISO file? After installation, did you find it was a Windows 8, not Windows Server 2012? Just a confirmation. Thanks for your understanding.
In addition, if
you use the link (English version) as Farhad suggested, will encounter the same issue?
Best regards,
Justin Gu

How many CALs do i need? Server 2012 - Exchange 2013 - RDP

Hi,
(I apologize for the grammar and spelling mistakes, but im confident in the fact that the text is understandable. If not, please let me know. I have used UK English for spelling.)
I did some research and read the following:
(unable to post links, my email needs to be 'verified')
And some MS pages regarding the CALs for Windows 2008 R2 (don't ask why).
This is basically what i want to do:
OS:
Windows 2012 R2, possibly 2x because of the RDS role.
Roles Server1: Active Directory and Exchange 2013
Roles Server2: File server and RDS
Users:
20
PC’s:
Approx. 15. Not sure about the exact numbers, but i am sure that there are more users than client pc’s.
Users RDP:
Starting with 10 but eventually every user will be using RDP, so it might be also 20. The 10 we start with will not have the ability of logging into a client PC but RDP only.
MS Software:    Outlook 2010 or 2013, depends on the support by MS.
We are going to start with an AD with a home folder, roaming profiles and an email account. If everything go’s whell, we plan to start letting users connect tot heir workspace via RDP.
I came to the following conclusion and need your input on this:
20 User CALs, As far as i know, I need 1 user cal for an AD account and a RDP cal for
one RDP account. Without a User CAL, i cant issue a RDP user cal, is this correct?
20 RDP User CALs, does this mean that all my users can log into a RDS session via any client, even their own private pc?
No Device calls, redundant?
20 Exchange CALs, I am not sure about this one, the second link i found only mentions acces via web and mobile. I would also like to know if the Exchange CAL is per user or email. If it’s per user, then wat do i do with an email that is meant for multiple
users?
2 Server CALs, This is just buying 2012R2 isnt it? Does this also allow me to use one physically and the other as a VM in the physical one? Just asking, im not really going to use a VM.
Hope you guys can help me out on this one, i didn’t expect the CALs would bet his complicated.

Hi,
Under Per User licensing, you need a license for each unique human that will access the software. Based on what you have written above, below is a general description of the licenses you need:
20 Per User Windows Server CALs
20 Per User RDS CALs
20 Per User Exchange Standard CALs
1 Exchange Server 2013 Standard license
2 Windows Server 2012 R2 Standard licenses
Notes:
Each Server 2012 R2 Standard license allows you to install it on a physical server (up to 2 CPU sockets) with the Hyper-V role installed, and install it in 2 VMs. The key here from a licensing perspective is the installation on the physical server
is only being used for Hyper-V--if you use it for some other purpose (like AD, SQL, etc.) then you are only permitted to run 2012 R2 on 1 VM without an additional license. Running your servers as VMs is the common and recommended method now, unless
you have a specific reason not to.
I listed two 2012 R2 licenses above because from your description I get the idea that you will have 2 physical servers.
It is preferred to split key roles/functions onto separate VMs if possible. For example, it would be preferred to have Exchange on its own VM(s). This is obviously subject to your specific situation, budget, etc. In smaller environments
some roles will be combined in order to save money.
I did not include licenses for Office in the list above.
Yes, Per User licensing means the user can access the software from any device, even their own private pc.
I recommend you purchase licenses through a MS volume licensing program that fits your needs. Adding Software Assurance (SA) to your licenses will allow you to get the new versions when they are released as well as give some additional licensing rights.
As always, it is essential to read the Product Use Rights (PUR) document, licensing agreements, terms and conditions, etc., as applicable to your licenses.
I recommend you also take a look at the Office365 plans that include Office/Exchange/etc. There are Exchange-only plans as well. Depending on your needs it may be preferred to have your users access Exchange in the cloud and run RDS on premises.
Licensing Windows Server 2012 R2 Remote Desktop Services and Microsoft Desktop Applications for Use with RDS
http://www.microsoft.com/licensing/about-licensing/briefs/winserv2012-rds.aspx
Exchange Server 2013 licensing
http://products.office.com/en-us/exchange/microsoft-exchange-server-licensing-licensing-overview
-TP

A few bumps from whs to Server 2012 R2 Essentials

I'm a typical WHS user looking to upgrade (non-business use) for a simple storage area and being able to back up the laptops and PCs in the house.
Problem not solved:
Perhaps not a Server 2012 r2 Essential problem but my WDTV Live can't access the shared folders. After installing the media server add-on for Server R2 Essentials the WDTV Live is able to see the server via the media server but its messy and cluttered and
also reports no media found within folders.
With WHS I was able to view the shared folders easily. Have not been able to enable the shared folders with the WDTV Live...
Big thanks for any help, Microsoft Server 2012 R2 Essentials seems like overkill for home use but I'm really liking it.

Thank you very much for the reply.
I have installed Serviio and things seem somewhat better, just getting Serviio's preferences setup. Dont' need artists/date/etc. info and I'm setting it in preferences.
Just need a simple media folder structure:
Video folder/Videofile + Videofile.jpg
Picture Folder/JPGs
Music Folder/MP3s
Was hoping share folders would be the simple way to go but WDTV still can't access shared folders from server.
Don't really need transcoding because WDTV handles the x264 and VLC handles it on the family PCs.
So close to finish now, I'll bug in another thread about anywhere access as it's just a bonus and not really needed.
Again, thank you for help, just need to figure out how to un-install the microsoft media server now...

SAP Mobile Platform 3 compatibility with windows server 2012

Dear All,
As per SAP release notes Window Server 2012 is compatible with SMP 3.0 but after installation i see that the SMP3 Services are always into the hung state meaning they neither start nor stop. They are always in the starting state. Whereas it runs fine with Windows Server 2008 R2. When we force kill all the process running with SMP3 Service we can stop it but it doesn't start at all.
Has anyone faced this issue till now.
Thanks

Hi Rakshit,
I guess Eric Solberg, Mustafa Saglam can answer better.
Rgrds,
JK
PS: Raise a SAP ticket.
Message was edited by: jitendra kansal

Installing Server 2012 on PowerEdge T110 II in Raid Mode

I am trying to install Windows Server 2012 on a PowerEdge T110 II that I just purchased. No software and driver utility disks came with the computer! When I try to install Windows straight from the OS Install disk it tells me that some drivers are missing however it does not list any specific ones missing to know what is lacking! The message reads: "A media driver your computer needs is missing. This could be a DVD, USB or hard drive disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now...."
I read in your Microsoft Windows Server 2012_Installation Instructions User's Guide_en-us document that I needed OpenManage 7.2 which supports installing Windows Server 2012 OS. I got the ISO of OpenManage 7.2.0 A01 from your website and burned it to a DVD. I started the computer with this DVD and was able to get to Dell Systems Build and Update Utility. From there I went to Configure Against Server OS Installation. It provides a list of supported OS. Windows server 2008 and 2011 are listed but not 2012!
When I go into the BIOS (PERC S100, version 2.2.3) and change the SATA settings to ATA and run OpenManage and go to Dell Systems Build and Update Utility and Configure Against Server, this time Windows Server 2012 shows up and I'm able to proceed further until it gets to 100% complete and reboots. I insert Server 2012 install DVD during reboot and it states "Valid Operating system installation media was found. Press "OK" to start install." A system Build and Update Utility message appears that states: "The Temporary Partition will be removed. If an error is encountered during the operating system install, you will need to use the Systems Build and Update Utility to restart the install process." I press OK and get an Install Windows message that states: "The file "autorun.dll" could not be loaded or is corrupt. Setup cannot continue. Error code is [0xC1]" I burned the OS DVD from a Microsoft ISO. I have read that perhaps the DVD needs to be burned differently and at a slower speed. That may resolve this last issue (don't know yet), but I actually would like to setup this computer in RAID mode anyway and first I need to resolve the following question:
1) Is it even possible to install Windows Server 2012 with Raid Configuration on this hardware? If yes, how? The OpenManage-->Dell Systems Build and Update Utility-->Configure Against Server does not list Server 2012 unless the SATA setting is not set to RAID!!!
2) When I configure the same computer with Server 2012 as the Operating System installed on Dell.com's Configure and Buy site, it gives a configuration error that says "Errors: Microsoft 2012 options selected from Operating System require Microsoft 2012 Media." When I pick/check "Windows Server® 2012, Foundation Edition, Media Kit" the error goes away. Do I need this media kit? Is this what is causing the issue with the install? And where do I get this missing component?
Any guidance you can give me or reference to appropriate material/docs to help out would be greatly appreciates as I have spent/wasted several days trying to get this server's OS installed! Thank you.

The T110 II is almost two years old, so yes, compared to the 12G systems, it is using older hardware (I suspect the T110 II's replacement is due out soon). The S100/S110 is a special implementation of Intel's onboard RAID, so the S110 is not an option on the older boards that have the S100.
ftp.dell.com/.../DELL_MULTI-DEVICE_A05_R294489.exe
Good luck.

SQL Server 2012 is prompting wrong message while creating new instance.

Summary:
While performing two task simultaneously 1) deleting existing SQL Server 2008 r2 instance 2) Creating SQL Server 2012 Instance. I received wrong message.
Explanation:
I have SQL Server 2012 setup in my server. By mistake I created SQL Server 2008 r2 instance.
Now simultaneously I was performing two task 1) deleting SQL Server 2008 r2 instance 2) Creating SQL Server 2012 Instance.
While creating SQL Server 2012 instance i received popup message "Another SQL Server 2012 setup is running but the running setup was not SQL Server 2012, it was SQL Server 2008 r2.

Hello,
You should not run two SQL Server setups at the same time. In fact, SQL Server has a rule to verify there is no pending restart because of an installation/uninstallation in progress.
Please cancel the installation of SQL Server and continue uninstalling the SQL Server 2008 R2 instance.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Windows Server 2012 R2 ISO download incorrect in Evaluation center.

I've tried to download the ISO 3 times (the 4th is in progress now)
The first time I tried I got an Akamai error. Then after trying again, the download completed without error.
However the directory didn't contain an ISO it had 7 files:
SC2012_R2_SCOM.EXE
SC2012_R2_SCAC.EXE
SC2012_R2_SCCM_SCEP.EXE
SC2012_R2_SCDPM_EVAL.ZIP
SC2012_R2_SCO.EXE
SC2012_R2_SCSM.EXE
SC2012_R2_SCVMM.EXE
They all appear to be for System Center, not Windows Server 2012 R2.
I was very careful to specify Windows Server 2012 R2, (especially after the 3rd time)
The download bar in the upper left says "Windows Server 2012..." I can't see what's after the ...
Anyone have any idea what's going on?
Thanks,

Hi,
Please follow the steps below to download it.
1. Open
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-r2
2. Expand Windows Server 2012 R2 and choose ISO/VHD. Then, click Register to continue.
3. Complete the two forms.
4. When you reach the Akamai page, you can choose “download the installer” or “If you cannot complete the installation, Click here”
5. If you choose “Click here”, then you choose “OK” on the next page and get the download link.
Best Regards.
Jeremy Wu
TechNet Community Support

Up gradation from server 2012 r2 foundation to server 2012 datacenter

I am trying to upgrade Windows 2012 Foundation to Windows Server 2012 Datacenter. As foundation allows only 15 user and i want unlimited users. I have not been able to find any instructions for accomplishing this. Any pointers to this
info will be helpful.
Thanks,
Zeeshan

Hi Zeeshan,
As I know, upgrade of Windows Server 2012 Foundation is not supported. For more detials, please refer to the following article.
Introduction to Windows Server 2012 Foundation
If didn't want to be limited to a total of 15 users in Active Directory, you should consider other Windows Server edition (not Windows Server 2012 Foundation).
Hope this helps.
Best regards,
Justin Gu

Option for Windows Server 2012 R2 in WSUS with SCCM

Hi,
I have an emvironemnt of SCCM 2012 R2. I am trying to configure patching with SCCM. I have installed WSUS and configuring it on SCCM.
But in the list i do not Windows Server 2012 R2 as an option.
How to enable that?
Thanks Chandan

Hi,
Do you mean you can’t find windows server 2012 r2 in Software Update Point Component Properties?
Run a synchronization, check if the catalog will be updated.
Hope this helps.

Log into a virtual machine on server 2012 r2 datacenter from a windows 8.1 client login

Hello,
I have set up a VPN on Windows Server 2012 r2 Datacenter using Hyper-V. Everything seems to be functioning ok using the Hyper V platform. I would like to know if it is possible to connect to a virtual machine on the VPN from a Windows 8.1 client using the
widows login and if it is then how to go about it. If I could have some links to tutorials etc I would be greatful. I have not been able to find anything and I have been looking for days. I would really appreciate some assistance. Thanks in advance.
Ed

Hi Ed,
I am sorry to say that I am not quite sure of your requirement. Is the Windows Server 2012 R2 computer a host server in Hyper-V? Did you mean that you want to RDP into a Hyper-V VM from a Windows 8.1 client? If yes, you need to allow Remote Desktop Connections
in guest OS. The network adapter type must allow communication with host machine and network discovery mode and the services supporting network discovery mode must be turned on.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows Server 2012 GPO setting are not apply on windows Xp clients

Hi
I am create GPO on windows server 2012. 300 clients on domain are working fine, GPO setting apply on all windows 7, 8 clients. But 200 clients of windows XP are not working. GPO setting are not applies on XP. I am trying to Group Policy
Preference Client Side Extensions for Windows XP (KB943729) on one window XP client, all GPO servers 2012 setting is working fine. But is not solution. I have 200 clients of windows XP, Please provide batter solution on one click command and apply all 200
XP clients.
Thanks.

Dear,
I have Windows server 2012 , i have install ADDS with Forest functional level 2008 & Domain functional level 2008 .
I have applied GPO to particular OU, when i login to domain user on Windows 7 PC all GPO working fine but when i login on Windows Xp SP3 PC its not applied on XP.
I am facing issue on windows XP clients it is true. Please see this URL address:
http://blogs.technet.com/b/grouppolicy/archive/2009/03/27/group-policy-preferences-not-applying-on-some-clients-client-side-extension-xmllite.aspx
Please provide batter solution on one click command
Thanks.

SmartCard Login not function Server 2012

Similar Messages

Maybe you are looking for