Smartform address style

hi!
haven't found a solution for the following problem:
I'd like to use a style on an address node in smartforms! how can i do that?
Another question:
Is it right, that the vertical allignment in a smartforms table can't be changed?
regards,
jacko

Hi
u can use Smartstyles for Address Node , when u create it  USe OUTPUT OPTIONS TAB  Next to GENERAL TAB and include the Smartstyle and use the Paragraph format in the GENERAL Tab and Output Starts with Paragraph:
surya

Similar Messages

  • How to call hr_location_api.create_location for different address style with only those fields that belongs specific to  that address style.

    How to call hr_location_api.create_location for different address style with only those fields that belongs specific to  that address style. It should decide at run time means at run time it will come to know the type of address style and based on that only the fields which belong to address details mapped to calling hr_location_api.create_location.
    Thanks in advance.

    You can create a wrapper package on top of the API (hr_location_api.create_location)
    In the wrapper package you set all the values dynamically based on your requirements(say the style and add_line columns are populated on your conditions) and then you call the API.
    Does that not work ?

  • TCA API create_location creates locations irrespective of the address style

    Hi All,
    We are using Trading Community Architecture API for customer conversion. We have address styles setup for Canada and US and we have attached these address styles to the respective countries in the territories window.
    But when we use create_location API for creating location and then a party site for it, it allows us to create the locations even when we dont pass in a value for the REQUIRED fields setup at the address style. We expected it to error out.
    Does anyone have idea about how this works. We want the API to validate the addresses we enter for locations with the address styles we set up.
    ketha

    You can create a wrapper package on top of the API (hr_location_api.create_location)
    In the wrapper package you set all the values dynamically based on your requirements(say the style and add_line columns are populated on your conditions) and then you call the API.
    Does that not work ?

  • " ID Generic for the flexfield segment Address Style does not exist"

    "ID Generic for the flexfield segment Address Style does not exist in the Value set $Flex$DF_contexts"
    Can some one help with this iRecruitment issue.

    Just enable the context for the other countries within the definition of the address flexfield. You should then get a drop down list of countries, select it and then the flexfield definition of the address will refresh according to your selection.
    Check that the original definition of the address flexfield on the personalisation page includes all the other contexts.
    Regards
    Tim

  • Error 'Invalid address style' when create new address Legal Entity R12

    Hi,
    Did somebody had the same problem like i do.
    I am trying to create a new dutch address for a new legal entity in Oracle R12.1.1 Vision, but however hard i trying to do so i always received the error message 'Invalid Address Style' and i filled in all the required field.
    When i tested with the country 'US' or 'Australia' is could create a new address without any problem.
    I hope you can help me to solve my problem.
    Thanks in advance...!!
    Wim

    Hello Sandeep,
    You were right, I checked the dff for the address style and activated the once for the countries I needed and now I can create new address for the required countries by using the legal entity configurator.
    Thanks for your help..!!
    Regards,
    Wim
    PS: Incase somebody else has they same problem, let me know and i send you the worddocument i made with the solution

  • Payables Address Style and Country Setup

    Hello All,
    How can i setup address style? What is the default value?.
    Is this linked with Address Book page in supplier creation.
    I am unable to create addresses, it says One or more Required segments are not entered.
    what is the issue.

    Duplicate thread.
    Unable to create Address In Address Book
    Re: Unable to create Address In Address Book

  • Address Style in TCA

    I would like to change the address style in the fromatted address. I do see that the formatting is done in the package hz_format_pub. Where in the application can I go and change the order of the various styles. The current data is stored in the table, hz_style_fmt_layouts_b, and I would like to change it.
    thanks for any insight you can provide.

    Hi,
    Please see these docs.
    HOW TO SETUP FLEXIBLE ADDRESS FORMATS FOR UK/AFRICA/AUSTRALIA [ID 1014581.102]
    R12: Suppliers Setup Showing All Address Lines as Required for UK Address Style [ID 567011.1]
    R12 Supplier: Address FAQs [ID 601661.1]
    Address Format For User Registration Is The Same For All Countries [ID 465447.1]
    Is It Possible To Change The Order On How The Address Information On Customer Standard Header Form Is Displayed? [ID 312776.1]
    Thanks,
    Hussein

  • In smartform address element ?

    hi guru's.
                  i am doing purchase order smartform in that address window displaying like this
                                   The Post Office
                                   Post Office Headquarters
                                   33 Grosvenor Place
                                   London
               but i want to modify like this
               ADDRESS:     The Post Office
                                     Post Office Headquarters
                                     33 Grosvenor Place
                                     London
    please let me how to proceed for this requirement.
    regards,
    satheesh.

    Hi Satheesh,
          Are you using ADDRESS WINDOW to display the address????
    If Yes ...
    Then CREATE two windows and allighn it side by side .
    Create one Text element on the left side Window and write "ADDRESS" inside the text.
    The Right side window will contain the ADDRESS .
    It will be displayed as given below.
    ADDRESS:  The Post Office
               Post Office Headquarters
               33 Grosvenor Place
               London.
    If U are not using ADDRESS window,
    then the only way to display like this is
    to create a TEMPLATE with 4 columns, create TEXT elements for each columns
    and in the text element of FIRST column write ADDRESS: &wa_post_office&.
    The advantage when we use Address is we need to just pass the address number , but if we use
    template then we need to write select statement , and fill some workarea with
    the address  details and display those work area fields in the TEMPLATE.
    Regards.
    Avi....

  • SMARTFORM Address

    Hello.
    Is there any way to reorder the lines of the address structure of the smartform?
    It prints the street as Street2, Street3, Street.
    Is there a way to make it print Street, Street2, Street3.
    Thank you
    Nuno Silva

    hi
    Use function module
    <b>ADDRESS_INTO_PRINTFORM</b> which act like ADDRESS ENDADDRESS
    In which all options are available like no line ...etc.
    ADDRESS_INTO_PRINTFORM Address format according to Post Office guidelines Note. It's enough to import two parameters:
    ADDRESS_TYPE = 1 (Firm or Organization, SAP Address)
    ADDRESS_NUMBER
    regards
    vind

  • Smartform Address-spro

    Hi A
    In spro under Defination under SD under Maintain Sales Office
    Under Sales Office  4000 the Address is given:
    Name                         : Honeywell Technologies Sàrl
                                      : ECC EMEA - HFM 302731.
    Street/House number   : Z.A. La Pièce 16
    Postal Code/City         : 1180       Rolle
    Country                      : CH Switzerland
    And in smartform the output is as fallows under Address:
    Honeywell Technologies Sàrl
    Z.A. La Pièce 16
    CH-1180       Rolle
    Switzerland.
    Here the 2nd line is not printing means ECC EMEA - HFM 302731 .and for only 4000 sales office only it should print rest of them they r not printing ,no need to print rest of sales office,
    Please tell me where to do the changes in spro or in smartform .
    and how to do.please explain ?
    Thanks in Advance,

    Hi,
    In address tab thr is one input field called
    "Number of lines to be used" Try to give grater value into that.

  • New style added to copied Smartform, Translation Style Issue

    Hi Everyone
    I copied an existing smartform to another one where in I had to change the style used in the smartform to another style.
    But I am not able to change the style used for translations maintained in se63.Any Suggestions??
    Please help!!

    Hi,
    When u copying the smarform from on form to another form at same tiem we have another optione is there style copy that style into another style.
    STEP1:GOTO-SMARTFORM-SELECT 2ND RADIOBUTTON----GIVE TO STYLE NAME-COPY THE STYLE INTO ZSTYLE.
    Then u can use that style.
    Regards,
    muralii.

  • Issue with Smartform Font Style/Size

    Hi All,
    I have created some paragraph formats with font style "Times" & size such as 8,9,12 pt.
    Used the same in some smartforms, which is working fine in my testing server. When I transported the same to my quality server the output of Smartforms are displayed in font style " Courier " .
    I checked all the objects in Quality server, it's as t is in Testing server.
    Times font is also available in Quality server/
    Could anyone of you can suggest anu solution for it ?
    Thanks,
    SA

    hey smita,
    you have to transport that particular smartstyle in which you have creted paragraph formats and char formats.. so transport the styles too to quality.
    hope this will help you out..
    ramu

  • Smartforms address

    Hi experts,
    I have created ITAB(T_EQUP) to get the customer addresses.
    Same structure(T_PVT) i have created for smartforms.
      call function fm_private
        tables
          t_pvt = t_equp.
    In the smartforms ,sap address number i have given &T_PVT-CADRNR& to get the address dynamically.While executing iam getting the error "Error in address output (address not found)." But there are values in T_EQUP.
    Where might be the problem?If i give direct address number like 24354 , iam getting the address.
    Can i give &T_PVT-CADRNR& directly in the address number?Or is there any other way?
    reward guaranteed
    kaki

    debug ur smartform n c if &T_PVT-CADRNR& is having any value. i guess there may be a problem. or else the format of the address number may need a little modificaton.just chk it in debugging mode.
    Regards,
    Bikash
    did u check the value of &T_PVT-ADRNR& in ur smartform ??
    Message was edited by: Bikash  Agarwal

  • SMARTFORMS no style change

    Hi experts!
    I have a weird senario here.
    The customer wants to display a quantity field in different colors based on some conditions.
    I've written the code, filled somke flags (e.g. flag_yellow, flag_red and so on). In my form i have some text elements with output condition checking the flags. Based on  the flags i output the text elements in diffenrent colors.
    Even though the yellow flag works just fine, the red one does not. Insted, the red text element is displayed right next to the previous output field and without any color.
    I have checked everything and still cannot find a way out of this. I have even tried displaying the field in bold and still nothing..
    What am i missing here??
    Please advise!!
    Thank you in advance!!

    Hi,
    are u using any particular  'Z' smartstyle?
    If yes create paragraph formats according to conditions with relevant font colours.
    Activate that smart style.
    While displaying amount (text) in smartform use particular paragraph format.
    If no, then create one Z smartstyle.
    create paragraph formats according to conditions with relevant font colours.
    Activate that smart style.
    While displaying amount (text) in smartform use particular paragraph format.
    dont forget to give style name in output options of each text element.
    Hope this will help to solve the problem.

  • Smartform address in a single line

    I am having a window where I have address as 3 lines..but I want to keep in the footer in a single line with comma.
    I am using the address node's for it.
    do you have any idea how to do it.

    Hi mark,
    Using ADDRESS NODE the text cannot not be displayed as per your requirement.If you want to display the address in a single line with comma then use TEXT NODE.
    Regards,
    Sravanthi

Maybe you are looking for