Smartform Alignment for the PDS(Personal Data Sheet) for Japanese Language

Hi,
I have a Probelm in the alignment in the smartform for the Personal data sheet report when logon in
Japanese language.
The texst are Overlapping.
For example:
I have 2 columns in the PDS such as Postion title and Job title.
The texts in the Postion title is Overlapping into the Jobtitle and So on.
And the issue is happening only when i log onto Japanese Language(JA) where as for other languages
the texts are not overlapping.
Could anybody help me in solving the issue.
Thanks.

Japanese characters usually occupy duble byte space, that is a single japanese character will occupy the space of 'AB',
so what you can do is,
change the layout of the Screen (make the window larger),
you can split the text and write it in two lines (if your team agrees)
you will have to create a seperate Smartform for Japanese Language
you can try condensing the text &test(C)& for certain texts it might work
regards,
S.Dakshna nagaratnam.

Similar Messages

  • Data Sheet for the TNT4882

    Where can I find a "real" data sheet for the TNT4882 that shows voltage levels, currents, setup times, etc.

    The appropriate link is available from:
    http://www.ni.com/support/gpib/reg_prog.htm

  • How to list a material in a plant for the specified delivery date

    Hi experts,
    I am quite new in the area .I have now a problem with PO.
    At the item level of my PO, the plant will not be extracted automatically. Is this normal?
    And after I entered the plant manually and the error message shows up:
    ""the material xx not listed in plant".
    To be more specific, "Material xxx is not listed in plant xxx for the specified delivery date".
    I have checked the material master data and found this material has been extended for this plant.
    How can I fix this problem?
    Best regards,
    Fan
    Edited by: Fan Mou on Aug 27, 2009 3:18 PM

    Hi,
    At the item level of my PO, the plant will not be extracted automatically. Is this normal?
    Yes this is normal, however you can set a plant to be proposed by the system. To do this in the purchase order, click the button Personal setting, which you can find at the top right hand side. The system will open a personal settings window. In the default values tab, under PO item tab, you can enter the default plant value and other data. Save the data. Then whenever you create a new purchase order, the system will populate these default values.
    ""the material xx not listed in plant"
    Check whether the material master -purchasing view has been activated or not.
    Regards,

  • The same Object Version Number for the same person id multiple times

    Hello all,
    I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
    person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

    Hi Baal666bobo,
    The person table is date-tracked, so the PK has effective start and end dates as well.
    Get the correct record with sysdate(or any particular date) and then check the OVN.
    Cheers,
    Vignesh

  • An error occurred while loading the model for the item or data source 'EntityDataSource'.

    Hi Team,
    We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
    Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
    “An error occurred while loading the model for the item or data source
    'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
    Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
    Installed SharePoint Server 2013 Enterprise edition
    Did not configure it at this time
    Installed SQL Server 2012 with default instance installation (selected every features)
    Later installed SP1 for SQL Server 2012
    After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
    Again installed another Analysis Server and selected the tabular mode of data model
    Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
    Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
    Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances. 
    Questions/Doubts are:
    Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
    Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
    CTP3 software for Power View feature as mentioned in the below link.
    http://technet.microsoft.com/en-us/library/jj219634.aspx
    but we don’t have an option to download CTP3 software now from Microsoft site
    Or do we need to install
    Microsoft SQL Server 2012 With Power View For Multidimensional Models
    CTP
    http://www.microsoft.com/en-sg/download/details.aspx?id=35822
    Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
    http://www.microsoft.com/en-in/download/details.aspx?id=35575
    Error detail :
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
    xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
    the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
    the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
    cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
    cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
    /></detail>
    Please help me in  configuring Power View for SharePoint 2013.
    Thanks in advance.
    Pavan Kumar

    I'll bet that I know the answer to this one - and you probably won't like it ;)
    Here's the telling portion of that error:  "We cannot locate a server to load the workbook Data Model."
    This error is thrown in two scenarios; the first, when you haven't registered an analysis server.  The second appears to be the issue you're having:
    PowerPivot requires SQL Server 2012 SP1.  Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
    Check the version of SQL that you are running.  It should be version 11.0.3000 or greater.  If it's not, you have the wrong "SP1" installed.  The correct one is
    here.
    Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed.  You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
    the databases.  Once you've done that, PowerPivot and PowerView will work properly.
    I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

  • Unable to create or update the Excel Personal data provider in Web Rich

    Hi All,
    Iam getting the below error message ,when iam using Excel as personal data provider in WEBI Rich Client.
    "Unable to create or update the Excel Personal data provider in Web Rich Client Cannot open the workbook WIS:10872"
    Please suggest a solution ,it helps a lot..
    Regards
    Mahesh

    Hi,
    Was this issue resolved? I see this post has been marked answered but there wasn't any information on what it took to resolve the issue.
    We have our CMS and processing servers on Linux while our Scheduling servers are on Windows. The WEBI reports with external data providers fail to run on Infoview/ scheduler.
    We were told this is addressed in FP 3.6 but that is not the case. We installed FP 3.6 but still continue to see these errors. It required us to manually deploy the ExtensionFactoryService package for enabling the refresh of such reports on infoview/schedulers. It also involves placing of the file used [.xls/.txt] on the linux server on the PersonalDPFiles directory.
    No luck so far!!!
    Any help would be greatly appreciated!
    Thanks
    Avinash

  • Data Sheet for N5K-C5548UPM-B-S48

    Hi,
    I need a datasheet or technical documents for N5K-C5548UPM-B-S48.
    Manthan

    That part number is a bundle of: 
    a Base Nexus 5548UP,
    a 16-port Unified Port Expansion Module,
    a 48-port Storage License,
    and 8 Fibre Channel SFP+ modules.
    A good general data sheet for the Nexus 5500 family can be found here:
    http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-618603.html

  • Data sheet for AIWA SX-NS33YL

    I recently got gifted a pair of these speakers. I would be very happy if you could link the data sheet for me in order to buy an amp according  to their needs.
    Much appreciated
    Matias

    Hi Matias5511,
    Thank you for your message. Unfortunately, we are unable to assist customers outside of the US. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
    Thanks.
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Is there a standard report for calculation commision for the sales person?

    is there a standard report for calculating commision for the sales person?

    Hi Stephen,
    Use standard tcode IW39.
    In IW39 in section General Data / Administrative Data the is a check box "incl. object list" just tick that box and then give your required input parameters and u can get actual cost and planned cost both equipment wise (provided your input is equipment).

  • How to get an AppID for the Microsoft Academic Data?

    Hi,
    I have just signed up for the Microsoft Academic Data at http://datamarket.azure.com/dataset/mrc/microsoftacademic, but I need to get an Application ID to make it work on my website. 
    Perhaps, this this requirement could be found in this file: http://academic.research.microsoft.com/about/Microsoft%20Academic%20Search%20API%20User%20Manual.pdf
    Where can I find the AppID?
    Thanks in advance

    Hi,
    From the PDF file that you provided, we can found how to request a AppID.
    Here is snippet of PDF file.
    Requesting an AppID
    To identify each application using the MAS API, an AppID is required. To request an AppID, please provide the following information in an email request to
    [email protected]
    Contact Person
    Contact Email
    Project URL
    Project Brief Introduction
    Confirmation that you agree to the
    MAS Terms of Useand
    MS Terms of Use.
    o
    E.g. "We have read and agreed with the Microsoft/MAS Terms of Use" 
    o
    Include a link to theMAS
    Terms of Use,
    MS Terms of Use. 
    What we can do just follow as above process. Hope this helps.
    Best Regards
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • For MSDS(Material safety data sheet) whch standard forms ?

    For MSDS(Material safety data sheet) whch standard forms(smart forms,script)
    I should use.Kindly guinde on this.

    have u seeen SPRO for the same ?
    Regards
    Prabhu

  • Data Sheet for Sound Blaster Live (4810 or 481

    Is it possible to download the hardware data sheets for this PCI 6 card??Specifically, I need to know the speaker out specification (impedence? diameter and type of stereo jack? max current and/or voltage). Thanks,Joe

    Sorry about the repeated posts. I unintentionally hit submit twice, and submitted a third time when I received an error (didn't think the first one made it through).

  • My Apple ID was changed.  Yet when I try to update apps I am asked to enter the password for the old IG which will not work and no matter what I do. When I attempt to update apps it still askes for the wrong ID data.

    My Apple ID was changed.  It works fine on my IPad mini, my MAc and in Itunes Store,  Yet when I try to update apps on my IPAD 1 I am asked to enter a password for the old ID user name which appears in the pop up window. When It still askes for the wrong ID data. I have uodated it in settings, and I have logged ontht the account to verify that it still works properly and it does.  I reboot the IPAD and then attempt to update apps again but it still asked for the Old ID password and still shows the old ID username.  The dame thing refuses to recognize my new Apple ID data.  This is making my older IPAD unuseable.

    You cannot change your Apple ID. You can get a new one if you want, but all of your Apps and media are linked to yoru old Apple ID. And no, Apple won't transfer your old ID purchases to yoru new ID.

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Multiple Faces for the same person

    I found this unanswered archived post, which is expressing exactly the same problem I'm having...
    http://discussions.apple.com/thread.jspa?threadID=2099862
    When tagging photos there are multiple entries for the same person listed. In particular for three people (my kids) who have a lot of photos for each person. On the Cork board there is only one entry per person, so this is not a multiple face entry there.
    I was living with this for a while, but now I have my iPhone and can sync faces photos with it, I can see again there are multiple entries listed for these three people, yet there's nothing I can do in iPhoto to consolidate them.
    Has anyone else come across this (like the person in the above thread - which didn't get answered) and found a solution to fix up iPhoto? Clearly it's something odd going on in the Faces database thinking there are different entries tagged, but is still showing them together in the Cork Board.

    I would like to know how you got the multiple entries to appear. I'm having the same problem with my daughter. The only issue is, she is two and does not have any address book entries. I think I may have typed her name out several times when adding her name to a face instead of associating the photo with the existing entry. iPhoto recognizes they are the same places in some places, but not in others. I started a new post...
    http://discussions.apple.com/thread.jspa?threadID=2319735&tstart=0

Maybe you are looking for