Smartform : blank line created with out any reson , why ?
I have regular letter.
Line a
Line b
Line c......
but from some reason , some blank line created and cause spaces between the lines , why ?
For example:
Line a
Line b
Line c
Blank/space line
Line d
Blank/space line
Line e
Hi Dakota Piper,
I don't think theres any problem in ur table.
I think u have gone wrong in ur formatting.
u can try the following...
1) try to remove all the blank spaces, manually.
2) try to create right paragraph formats. paragraph formats will give a proper look, font, spaces & tabs to ur paragraph or to the text to which u assign that paragraph format.
assign the same paragraph format to all the lines.
3) if already the lines have some paragraph formats then check their line spacings.
line spacing is an attribute in paragraph format, where u can mention the amount of space between 2 lines called.
it is possible that the 1st 3 lines have been assigned the paragraph format with 0.5 LN line spacing
and next with 1.00 line spacing...so the rest of the lines appear as if theres a blank line between them
like this :
line 1
line 2
line 3
line 4
line 5
please try doing this...hopefully it should help u. it definitely seems to be some minor problem, which maybe is getting ingored by us. check every line properly.
Note: since i'm not infront of SAP window now, so not very sure...but in sap scripts we have this option in menu
GOTO -> LIST DISPLAY in this, the form is seen in list format...it clearly shows whether u have a blank line inbetween or no. thats the best format to check in.
not much sure abt smartforms, but please check.
regards,
Radhika
Similar Messages
-
HTTP Receiver Adapter payload as single line plain text with out any tags.
Hi PI experts,
I have a strange problem in http receiver adapter.
Sender RFC (SAP) Receiver: HTTP.
Receiver system expects the output from XI in the below format in a single line plain text with out any tags in the payload. and the content type should be application/x-www-form-urlencoded
Group=Test&Sentinel=Web%20Server&Facility=5345&Order Number=XT-XWHM-Y-NA&Serial Number=123456&@LABEL_QUANTITY=5&@LABEL_NAME=111114_Q
Is there any way to achieve this using http receiver adapter. Business is not ready to accept the output from XI not even in a single element instead they only need it as a JUST a plain text.
Appreciate early response on this.
Thanks in Advance,
JitenderDear Ola,
Could you elaborate how you achieved in catching the response data from the receiver in case of HTTP receiver adapter?
The target service is not a WebService but some python script that must to receive some paramters via POST request.
HOW can I post this parameters?
Here you entered the fields of the message type of the request in the header parameters of the receiver adapter? Thats fine.
But what about the message type and vice versa of the response from the receiver?
Regards
Rebecca -
Delivery Created with out Material Number
HI
I created an STO for material, when i have done the VL10B i got a message "See log for information about creating deliveries"
A Delivery got created with out the Material number, When i look in the Document Flow for the Delivery Created its preceding document (PO) is not linked
In the log information i see an error, Please advise
Diagnosis
The sales unit is not allowed for the material in item
000001.
System Response
The system does not allow further processing of this item.
Procedure
Check your entry.
Select a sales unit which is defined for the material in the
material master record. Normally the sales unit will be
determined immediately from the master master record.see the change log of material master in MM04.
check if the sales unit got removed recently (after the PO creation - before delivery creation)
if it is not caused by material master directly, then check if you have any userexit in place that changes the sales unit in the delivery.
SAP has a sales unit in mind which is not available in material master, hence it issues this error. -
Can position be created with out creating Job..
Hi Experts,
A simple question but quite complicated.
Can position be created with out creating the job. ( yes it will give the warning and create).
Here my actual question comes, what is the need of creating the Job. when we can create position without job in general Scenario.
Is it compulsory to create job whenever we create position.
Your replies are highly appreciated.
Thanks in advance.
Regards,
DolllyHi Dolly,
I definitely aggree with what guru Sikindar mentions.
One more point:
SAP advises to create separate positions for each of the employees in your organizational structure.
For example, there may be a hundred "Engineer" positions in your company (with codes: 50000001, 50000002, ... 50000100).
At this point, when you're asked to take a report of all of the "Engineer"s in your company, then you need to enter all these position codes into the selection screen : Nearly impossible scenario!
However, if you had linked all of these positions to a single job named "Engineer" and numbered "50000000", then you would be able to find all the positions linked to this job and all the employees holding these positions by entering a single object ID and evaluation path in the selection screen of a particular report.
Regards,
Dilek -
my iphone doesn't show me the effect of the picture that Are taken with effect it just show them to me as a normal picture with out any effect and when I go to edit it shows there that the pic already has an effect and when I see the picture in group it shows that it has effect only when I tap on one to see it larger the effect disappear
I'm having the same issue, i restored my phone to Factory settings, even tried restoring it to my backup, half of my music bought from itunes won't play on my iphone and i'm super annoyed, this only happened once i updated to ios 7.2 so i assume its another glitch to go with my imessages not sending, getting sick of this.
-
My iphone 3gs ios 6.1.6 shutdown itself with out any error
my my iphone 3gs ios 6.1.6 shutdown itself with out any error & after restarting it the same thing happens please help
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. If the issue persists, take the device to Apple for evaluation.
-
User locks with out any log in event viewer
Hi,
In our active directory environment, Domain user gets locked out with out any event saved in event viewer as i am not able to see why these users gets locked.
Any help?Hi,
Additionally information for you:
Tracing Account Lockout Source
https://social.technet.microsoft.com/Forums/windowsserver/en-US/50512220-aeb2-4eb2-b467-2b9ad9a5b2db/tracing-account-lockout-source
Regards.
Vivian Wang -
I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do
did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable? -
My apple id cannot create with out credit card
my apple id cannot create with out credit card
To create an Apple ID without a credit card, you need to follow the instructions in this link:
https://support.apple.com/en-us/HT204034
Follow the instructions under "If you don't have an Apple ID" to create an Apple ID with None as the payment option.
If you are using an existing Apple ID, you must put a credit card on the account before you can change it to None, as the instructions under "If you already have an Apple ID" indicate.
Cheers,
GB -
Hi, I have an early 2008 24" iMac, I need more storage space and was wondering if I could fit a 3TB Western Digital Caviar Green HDD into it with out any problems? This is the one I've seen, Western Digital Caviar 3TB SATA 6 GB/s 64MB Cache 3.5 inch
My bad?
You're original response was questions/post about an iMac. Now you've edited it to ask about a Mac Pro?
You can more easily add internal drives in a Mac Pro.
Not too terribly easy to add/replace drives in an iMac.
If younhave questions about a Mac Pro, try posting in the Mac Pro forums.
Much more knowledgeable users there. -
when I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?
Have you tried to export different images as a test to see if it is related to the one you are getting the error on? Also try to export to a different folder other then the Desktop, again to see if the problem is connected to that folder.
Another thing to do is run the Aperture Library First Aid on the library. Hold the option and command keys down while you start Aperture. First run the Permission Repair and see if that helps. If not quit Aperture and restart and run the Library Repair and try.
Post back if you still have problems
regards -
Invoice created with out GR and posted after GR matches
Hi ,
can you help any body regarding this issue, where i need to do settings and all.
GE Water has the ability to enter invoices even if there is no goods receipt in SAP. Invoice is entered and "R" block is placed on the document in SAP. MRBR is run nightly to look at "R" blocks and see if they can be matched with goods receipt. If match is found SAP removes "R" block and invoice pays. If no match found, invoice still sits in SAP unpaid. Need SAP to be configured to do this in GE Energy. Currently if no goods receipt is found for an error message is received that no document exists. On blanket PO's blank lines are shown and invoice can not be entered without creating GRIR issues and payments not posting to the correct accounts
Thanks
Madhu
Edited by: madhu mandapati on Oct 23, 2008 12:47 AMHi,
This essentially shoud be put in MRBR only by creating ZMRBR probabaly
You need ABAP development to put your desired logic
You are entering invoice before GR it means that you are doing PO based invoice verification
Then at the time of releasing blocked invoices you want system to Check the goods receipt
and provide you the message and or work further as directed
Please discuss with technical ABAP team
Diwakar -
Smartform, blank line inbetween TWO include texts
Dear Gurus,
IN SMARTFORMS ,
I have to include a blank line inbetween two consecutive include texts.
Please help me.
Regards,
Roshan Lilaram.Dear Matt this will not help my issue, i need a blank include text ONLY.
See for Eg, i have four include texts, inbetween each of these i put a text element as you said, then even if i am not printing anything in my second include text,this text element will be printed with a blank line,
Now as per this condition, there are two blank lines inbetween my first and third include text.
This is not right logically, In any case i need one and only one Blank line,
I hope i have made my issue more clear.
Please help me in getting a Blank Include Text.
Regards,
Roshan Lilaram. -
Smartforms: Blank line is displaying in item list from page2 onwords
Hi Guys,
In Output messages(ME9K), using smartform to display list. First page layout and 2nd, 3rd .......pages layout is different.
so i defind two pages. output list displaying is correct which is more then 2 pages, but from 2nd page onwords one blank line is coming in mainwindow at items list.
2nd page i selected is mode:Page and overall page unchanged.
can you suggest me please.
Srinu.Mike,
I'd guess that you're getting an "extra value". The tenth parameter to select_list_from_lov can be set to 'NO' to suppress this but you'll want to determine why there is an extra value if you aren't expecting one.
Scott -
Delivery created with out stock
Hi folks,
Sales order has been created for 'X' material,but there is 0 stock available for this material "X", ATP has been carried out and has proposed a further date, but when try to create a delivery,delivery documnet has been created even though there is 0 stock ( no stock ) for material 'X'.
How is this possible..................? actually SAP doesn't allow to create a delivery with out stock.............
please suggest.................
points will be rewarded................Hello,
The system will allow you to create a delivery even if there is not stock. But it will not allow you to create post goods issue until the stock available in the storage.
I think there are user exits to prevent system to create the delivery if stock is not available.
Prase
Maybe you are looking for
-
HP Mini 1000 - Solid State HD Constantly Thrashing - Slowing System Down
I recently bought an HP Mini 1000 (the actual model number is the 1100 CTO). It came with the HP flavor of Linux. I put the Windows 7 RC on it, as several others have, and noticed incredibly poor performance with the 32GB solid state hard disk. The
-
Reverting to default start page doesn't help
-
Limiting Bandwidth on a 6509 switchport.
We have a user that is gaming, is there a way to rate limit bandwidt to the switchport that is workstation is conncected. interface FastEthernet7/5 description D40A no ip address switchport switchport access vlan 74 switchport mode access spanning-tr
-
WRT54GL Not issuing DHCP to Laptops
Hello I have a WRT54GL V1.1 with Firmware v 4.30.2 I have it serving 2 TIVO boxes wirelessly with it serving up a DHCP IP address It is not broadcasting the SSID I have 2 XP Dell Laptops that will connect to the service but do not get a IP address. A
-
AirPort Radar widget not working
It keeps telling me that I need to install AirPort radar in the widgets folder. It is already in the folder...and still no luck.