Smartform Borders

Hi Friends,
In Smartform main window i'm using tables.
Now my problem is that the framed pattern is working but lower/upper/right/left frame is not working.
in individual table cells also I've give lower frame but it's not working.
Thanks & Regards,
Vallamuthu.M

Hi,
If everything is perfect withrespect to the layout design,then check your device type.
Smartform printing problem using dot matrix printer
Jshree

Similar Messages

Smartform - Borders are not appeari when iam printing in DOTMATRIX Printer.

Hi,
I have Created a Smartform. When iam taking printout in Deskjet, borders & Line spacing
is comming Correctly. When i try to Print using the Dotmatrix borders & Lines are not
appearing.
Regards
Praveen

Hi,
Check the assigned page format to your custom device type. Try to assign all the page format which are available for
HP*** which you gives you desired result.
Regards,
Vamshi.

Smartform window borders not appearing in dot matrix printer Epson FX-1170

Hi all. I have a smartform with boxes (made out of windows and its borders) and texts inside those boxes. In the print preview, it shows the window borders. However, when the actual printout comes, the window borders do not appear. I have tried to change the 'output options' of the windows - I tried using millimeters, centimeters, point, lines, as well as inches, for the unit and also tried changing the width, but it still doesn't appear. Has anyone encountered a similar problem with dot matrix printers? Please help.

Hi,
the dot-matrix printers cannot "draw" lines and pictures, so, it is not capable of drawing the vertical and horizontal lines you have defined in the smartform windows. I think that you need to write the horizontal lines using the '-' or '_' characters but I am not sure about the vertical ones. Of course, as you realize, this requires big development effort.
Regards,
George

Borders In Smartforms

Hi Experts,
I am having a problem in my smartforms.
If I try to give a border to one of my tables it does not display the above and below lines, this is the case for all types of borders (with or without grid ).
I have tried giving a gaps in the FORM painter but to no result.
Ravi

Hi Ravi,
Did u got out of the issue?
if no, just look at this..
In the Table Tab, at the starting u can see few buttons for selecting borders..
like outter frame, inner frame, left frame, right frame, upper frame, down frame.
select these as per ur requirement.
Thanks
Dinakar

How to print horizantal lines in smartforms?

hi friends,
how to print horizantal lines in smartforms.
waiting for ur valuble replies.
Thanks,
Kiran

HI,
If u use templates or table,then use borders to print the horizontal lines.
Eg : Create template-->Table painter->click select pattern button->Display framed pattern->select 3rd one.it will display only horizantal lines.
if want to print horizantal line under the text, then create one paragraph or character formate with Underline in smartstyles.Use that paragraph or character to u r text element

Smartform: windows in different pages having the same name

Hi all gurus,
first of all, please forgive me if I'm missing something, I'm quite new on the Smartform argument.
Shortly; I have to modify some smartforms made by someone else in order to meet customer's desiderata.
These smartforms are all different but share a common "structure", which is:
2 pages definition, P_FIRST and P_FOLLOW, which have actually the same internal "structure": they have a LOGO window, then a TITLE window, then a MAIN window, then a FOOTER, and so on.
In order to do my task, I added a new window in both P_FIRST and P_FOLLOW, let's call it CERTIFICATION_LOGO.
Moreover, I inserted a new graphic element under the LOGO window.
Modifying the smartforms, I noticed I have two different kind of behaviour:
1) in almost all these SF, I add a window called CERTIFICATION_LOGO in P_FIRST, then I have to add a windows to P_FOLLOW which cannot have the same name ( e.g. I called it CERTIFICATION_LOGO_FOLLOW);
2) in just one SF, when I add a window P_FIRST, then the exactly same window is added to P_FOLLOW. When I modify CERTIFICATION_LOGO window in P_FIRST, also CERTIFICATION_LOGO in P_FOLLOW is updated.
I can't find a reason why such different behaviour. Actually I'm testing my solution and found that the only smartform that does not work is the only one which I have described with 2). So my guess is that there's some setting anywhere which leads to that different behaviour and this could be a cause of a raised exception... but maybe it's just a case, also because I found in debug that in this standard call in the form PROCESS_TEXT_WINDOW:
perform xsf_window_open using docentry-tdwindow
docentry-tdwtype.
where docentry-tdwindow = 'LOGO' and tdwtype = 'T', the system exit the process at the first execution of:
check xsfop-xsf = c_true.
check not xsf_obj is initial.
What does xsfop-xsf should mean? In my case xsfop-xsf = false and xsf_obj is initial... then the SF is not generated.
What am I missing gurus?
Thanks in advance,
Matteo
Edited by: Matteo Montalto on Aug 26, 2011 4:49 PM

When you have common windows (LOGO on page first and logo on page next, etc.) you actually have one window definition. What you put in the window is therefore always displayed for all pages. In your case, instead of creating your new window and copying it into the follow page, you have two different windows, which now must be separately maintained, as to content, placement, borders, shading, conditions, etc.

Problem in Smartform

Hi,
I have created a simple smart form.
what it does is, it prints the material document number.
when im trying to see the preview of the smart form, it is showing &w_mkpf-mblnr& , but not the value of it.
When i tried to debug it, i found out that , in the table STXFTXT the value of TDLINE is "<(>&<)>w_mkpf-mblnr<(>&<)>" . But it actually should be "&w_mkpf-mblnr&" .
Can anyone tell me what the actual problem is and the solution of it.
Here is the smartform that i downloaded.(at the bottom, i have attached the program also)
<?xml version="1.0" encoding="utf-8" ?>
- <sf:SMARTFORM xmlns:sf="urn:sap-com:SmartForms:2000:internal-structure" xmlns="urn:sap-com:sdixml-ifr:2000" sf:language="EN">
- <HEADER>
<FORMNAME>ZSUM_SMART</FORMNAME>
<CAPTION>Smart form</CAPTION>
<MASTERLANG>E</MASTERLANG>
<LANGVECTOR>*</LANGVECTOR>
<DEVCLASS>$TMP</DEVCLASS>
<VERSION>00001</VERSION>
<FIRSTUSER>TALASILAS</FIRSTUSER>
<FIRSTDATE>2008-01-16</FIRSTDATE>
<FIRSTTIME>10:31:54</FIRSTTIME>
<LASTUSER>TALASILAS</LASTUSER>
<LASTDATE>2008-01-16</LASTDATE>
<LASTTIME>10:37:48</LASTTIME>
</HEADER>
- <INTERFACE>
- <item>
<IOTYPE>E</IOTYPE>
<NAME>DOCUMENT_OUTPUT_INFO</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>SSFCRESPD</TYPENAME>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>E</IOTYPE>
<NAME>JOB_OUTPUT_INFO</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>SSFCRESCL</TYPENAME>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>E</IOTYPE>
<NAME>JOB_OUTPUT_OPTIONS</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>SSFCRESOP</TYPENAME>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>ARCHIVE_INDEX</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>TOA_DARA</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>ARCHIVE_INDEX_TAB</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>TSFDARA</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>ARCHIVE_PARAMETERS</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>ARC_PARAMS</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>CONTROL_PARAMETERS</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>SSFCTRLOP</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>MAIL_APPL_OBJ</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>SWOTOBJID</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>MAIL_RECIPIENT</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>SWOTOBJID</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>MAIL_SENDER</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>SWOTOBJID</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>OUTPUT_OPTIONS</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>SSFCOMPOP</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>I</IOTYPE>
<NAME>USER_SETTINGS</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>TDBOOL</TYPENAME>
<OPTIONAL>X</OPTIONAL>
<BYVALUE>X</BYVALUE>
<DEFAULTVAL>'X'</DEFAULTVAL>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>X</IOTYPE>
<NAME>FORMATTING_ERROR</NAME>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>X</IOTYPE>
<NAME>INTERNAL_ERROR</NAME>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>X</IOTYPE>
<NAME>SEND_ERROR</NAME>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>X</IOTYPE>
<NAME>USER_CANCELED</NAME>
<STANDARD>X</STANDARD>
</item>
- <item>
<IOTYPE>T</IOTYPE>
<NAME>ITAB1</NAME>
<TYPING>LIKE</TYPING>
<TYPENAME>MKPF</TYPENAME>
</item>
</INTERFACE>
- <GDATA>
- <item>
<NAME>W_MKPF</NAME>
<TYPING>TYPE</TYPING>
<TYPENAME>MKPF</TYPENAME>
</item>
</GDATA>
- <sf:VARHEADER>
- <sf:item>
<PAGEFORMAT>DINA4</PAGEFORMAT>
<CPI>10.00</CPI>
<LPI>6.00</LPI>
<STDSTYLE>SYSTEM</STDSTYLE>
- <sf:PAGETREE>
- <sf:NODE>
<NODETYPE>RP</NODETYPE>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>PA</NODETYPE>
- <sf:OBJ>
- <sf:PAGE>
- <NAME>
<INAME>%PAGE1</INAME>
</NAME>
<CAPTION>New Page</CAPTION>
- <NEXTPAGE>
<INAME>%PAGE1</INAME>
</NEXTPAGE>
<NUMB_MODE>I</NUMB_MODE>
<NUMB_TYPE>A</NUMB_TYPE>
<PAGEORTN>P</PAGEORTN>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>PA</OBJTYPE>
<INAME>%PAGE1</INAME>
<CAPTION>New Page</CAPTION>
</item>
</T_CAPTION>
</sf:PAGE>
</sf:OBJ>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>WI</NODETYPE>
- <sf:OBJ>
- <sf:WINDOW ID="484">
- <NAME>
<INAME>MAIN</INAME>
</NAME>
<CAPTION>Main Window</CAPTION>
<WTYPE>M</WTYPE>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>WI</OBJTYPE>
<INAME>MAIN</INAME>
<CAPTION>Main Window</CAPTION>
</item>
</T_CAPTION>
- <sf:PROC_CTRL>
- <sf:NODE ID="508">
<NODETYPE>RC</NODETYPE>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>SE</NODETYPE>
- <sf:OBJ>
- <sf:SECTION>
- <NAME>
<INAME>%TABLE1</INAME>
</NAME>
<CAPTION>New Table 1</CAPTION>
<SECTTYPE>C</SECTTYPE>
<DATATYPE>L</DATATYPE>
<TABNAME>ITAB1</TABNAME>
<TABHTYPE>I</TABHTYPE>
<TABHEADER>W_MKPF</TABHEADER>
<OTABTYPE>D</OTABTYPE>
<OTABHEADER>A</OTABHEADER>
<OTABFOOTER>A</OTABFOOTER>
<FHEIGHT>1.00</FHEIGHT>
<U_FHEIGHT>CM</U_FHEIGHT>
- <PATTERN>
<PATTNUM>0000</PATTNUM>
<FRAME>0.00</FRAME>
<U_FRAME>PT</U_FRAME>
</PATTERN>
<USEBORDER>X</USEBORDER>
<WIDTH>16.00</WIDTH>
<U_WIDTH>CM</U_WIDTH>
<APPMODE>L</APPMODE>
<U_LEFT>CM</U_LEFT>
<U_TOP>CM</U_TOP>
<U_SB>CM</U_SB>
<U_SA>CM</U_SA>
- <DYNLINES>
- <item>
<NAME>LTYPE1</NAME>
<DEFAULTVAL>X</DEFAULTVAL>
<SHADING>000</SHADING>
</item>
</DYNLINES>
- <CELLS>
- <item>
<NAME>LTYPE1</NAME>
<COLUMNNR>001</COLUMNNR>
<CWIDTH>16.00</CWIDTH>
<U_CWIDTH>CM</U_CWIDTH>
<SHADING>000</SHADING>
- <BORDERS>
- <item>
<IDX>001</IDX>
<INTENSITY>000</INTENSITY>
<LLEFT>0.00</LLEFT>
<LLEFT_U>MM</LLEFT_U>
<LTOP>0.00</LTOP>
<LTOP_U>MM</LTOP_U>
<LRIGHT>0.00</LRIGHT>
<LRIGHT_U>MM</LRIGHT_U>
<LBOTTOM>0.00</LBOTTOM>
<LBOTTOM_U>MM</LBOTTOM_U>
- <FILLCOLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
</FILLCOLOR>
- <CLEFT>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
</CLEFT>
- <CTOP>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
</CTOP>
- <CRIGHT>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
</CRIGHT>
- <CBOTTOM>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
</CBOTTOM>
</item>
</BORDERS>
</item>
</CELLS>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>SE</OBJTYPE>
<INAME>%TABLE1</INAME>
<CAPTION>New Table 1</CAPTION>
</item>
</T_CAPTION>
</sf:SECTION>
</sf:OBJ>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>EV</NODETYPE>
- <sf:OBJ>
- <sf:EVENT>
- <NAME>
<INAME>%EVENT1</INAME>
</NAME>
<CAPTION>Header</CAPTION>
<EVTYPE>H</EVTYPE>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>EV</OBJTYPE>
<INAME>%EVENT1</INAME>
<CAPTION>Header</CAPTION>
</item>
</T_CAPTION>
</sf:EVENT>
</sf:OBJ>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>SE</NODETYPE>
- <sf:OBJ>
- <sf:SECTION>
- <NAME>
<INAME>%ROW1</INAME>
</NAME>
<CAPTION>New Line 1</CAPTION>
<SECTTYPE>R</SECTTYPE>
<U_FHEIGHT>CM</U_FHEIGHT>
- <PATTERN>
<PATTNUM>0000</PATTNUM>
<FRAME>0.00</FRAME>
<U_FRAME>PT</U_FRAME>
</PATTERN>
<U_WIDTH>CM</U_WIDTH>
<U_LEFT>CM</U_LEFT>
<U_TOP>CM</U_TOP>
<U_SB>CM</U_SB>
<U_SA>CM</U_SA>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>SE</OBJTYPE>
<INAME>%ROW1</INAME>
<CAPTION>New Line 1</CAPTION>
</item>
</T_CAPTION>
</sf:SECTION>
</sf:OBJ>
- <sf:OUTATTR>
- <sf:OUTATTR>
- <NAME>
<INAME>%OUTATTRIB2</INAME>
</NAME>
<T_NEWLINE>X</T_NEWLINE>
<T_LINETYPE>LTYPE1</T_LINETYPE>
<U_WFRAME>PT</U_WFRAME>
<U_WBOXV>CM</U_WBOXV>
<U_WBOXH>CM</U_WBOXH>
<U_WLEFT>CM</U_WLEFT>
<U_WWIDTH>CM</U_WWIDTH>
<U_WTOP>CM</U_WTOP>
<U_WHEIGHT>CM</U_WHEIGHT>
- <BORDER>
- <LEFTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</LEFTATTR>
- <TOPATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</TOPATTR>
- <RIGHTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</RIGHTATTR>
- <BOTTOMATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</BOTTOMATTR>
</BORDER>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>OA</OBJTYPE>
<INAME>%OUTATTRIB2</INAME>
</item>
</T_CAPTION>
</sf:OUTATTR>
</sf:OUTATTR>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>SE</NODETYPE>
- <sf:OBJ>
- <sf:SECTION>
- <NAME>
<INAME>%CELL1</INAME>
</NAME>
<CAPTION>New Column 1</CAPTION>
<SECTTYPE>E</SECTTYPE>
<U_FHEIGHT>CM</U_FHEIGHT>
- <PATTERN>
<PATTNUM>0000</PATTNUM>
<FRAME>0.00</FRAME>
<U_FRAME>PT</U_FRAME>
</PATTERN>
<U_WIDTH>CM</U_WIDTH>
<U_LEFT>CM</U_LEFT>
<U_TOP>CM</U_TOP>
<U_SB>CM</U_SB>
<U_SA>CM</U_SA>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>SE</OBJTYPE>
<INAME>%CELL1</INAME>
<CAPTION>New Column 1</CAPTION>
</item>
</T_CAPTION>
</sf:SECTION>
</sf:OBJ>
- <sf:OUTATTR>
- <sf:OUTATTR>
- <NAME>
<INAME>%OUTATTRIB3</INAME>
</NAME>
<T_NEWCELL>X</T_NEWCELL>
<U_WFRAME>PT</U_WFRAME>
<U_WBOXV>CM</U_WBOXV>
<U_WBOXH>CM</U_WBOXH>
<U_WLEFT>CM</U_WLEFT>
<U_WWIDTH>CM</U_WWIDTH>
<U_WTOP>CM</U_WTOP>
<U_WHEIGHT>CM</U_WHEIGHT>
- <BORDER>
- <LEFTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</LEFTATTR>
- <TOPATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</TOPATTR>
- <RIGHTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</RIGHTATTR>
- <BOTTOMATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</BOTTOMATTR>
</BORDER>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>OA</OBJTYPE>
<INAME>%OUTATTRIB3</INAME>
</item>
</T_CAPTION>
</sf:OUTATTR>
</sf:OUTATTR>
<sf:SUCC />
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:item>
- <sf:item>
- <sf:NODE>
<NODETYPE>EV</NODETYPE>
- <sf:OBJ>
- <sf:EVENT>
- <NAME>
<INAME>%EVENT2</INAME>
</NAME>
<CAPTION>Main Area</CAPTION>
<EVTYPE>B</EVTYPE>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>EV</OBJTYPE>
<INAME>%EVENT2</INAME>
<CAPTION>Main Area</CAPTION>
</item>
</T_CAPTION>
</sf:EVENT>
</sf:OBJ>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>SE</NODETYPE>
- <sf:OBJ>
- <sf:SECTION>
- <NAME>
<INAME>%LOOP1</INAME>
</NAME>
<CAPTION>New Loop 1</CAPTION>
<SECTTYPE>L</SECTTYPE>
<TABHTYPE>I</TABHTYPE>
<U_FHEIGHT>CM</U_FHEIGHT>
- <PATTERN>
<PATTNUM>0000</PATTNUM>
<FRAME>0.00</FRAME>
<U_FRAME>PT</U_FRAME>
</PATTERN>
<U_WIDTH>CM</U_WIDTH>
<U_LEFT>CM</U_LEFT>
<U_TOP>CM</U_TOP>
<U_SB>CM</U_SB>
<U_SA>CM</U_SA>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>SE</OBJTYPE>
<INAME>%LOOP1</INAME>
<CAPTION>New Loop 1</CAPTION>
</item>
</T_CAPTION>
</sf:SECTION>
</sf:OBJ>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>SE</NODETYPE>
- <sf:OBJ>
- <sf:SECTION>
- <NAME>
<INAME>%ROW2</INAME>
</NAME>
<CAPTION>New Line 2</CAPTION>
<SECTTYPE>R</SECTTYPE>
<U_FHEIGHT>CM</U_FHEIGHT>
- <PATTERN>
<PATTNUM>0000</PATTNUM>
<FRAME>0.00</FRAME>
<U_FRAME>PT</U_FRAME>
</PATTERN>
<U_WIDTH>CM</U_WIDTH>
<U_LEFT>CM</U_LEFT>
<U_TOP>CM</U_TOP>
<U_SB>CM</U_SB>
<U_SA>CM</U_SA>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>SE</OBJTYPE>
<INAME>%ROW2</INAME>
<CAPTION>New Line 2</CAPTION>
</item>
</T_CAPTION>
</sf:SECTION>
</sf:OBJ>
- <sf:OUTATTR>
- <sf:OUTATTR>
- <NAME>
<INAME>%OUTATTRIB4</INAME>
</NAME>
<T_NEWLINE>X</T_NEWLINE>
<T_LINETYPE>LTYPE1</T_LINETYPE>
<U_WFRAME>PT</U_WFRAME>
<U_WBOXV>CM</U_WBOXV>
<U_WBOXH>CM</U_WBOXH>
<U_WLEFT>CM</U_WLEFT>
<U_WWIDTH>CM</U_WWIDTH>
<U_WTOP>CM</U_WTOP>
<U_WHEIGHT>CM</U_WHEIGHT>
- <BORDER>
- <LEFTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</LEFTATTR>
- <TOPATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</TOPATTR>
- <RIGHTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</RIGHTATTR>
- <BOTTOMATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</BOTTOMATTR>
</BORDER>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>OA</OBJTYPE>
<INAME>%OUTATTRIB4</INAME>
</item>
</T_CAPTION>
</sf:OUTATTR>
</sf:OUTATTR>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>SE</NODETYPE>
- <sf:OBJ>
- <sf:SECTION>
- <NAME>
<INAME>%CELL2</INAME>
</NAME>
<CAPTION>New Column 2</CAPTION>
<SECTTYPE>E</SECTTYPE>
<U_FHEIGHT>CM</U_FHEIGHT>
- <PATTERN>
<PATTNUM>0000</PATTNUM>
<FRAME>0.00</FRAME>
<U_FRAME>PT</U_FRAME>
</PATTERN>
<U_WIDTH>CM</U_WIDTH>
<U_LEFT>CM</U_LEFT>
<U_TOP>CM</U_TOP>
<U_SB>CM</U_SB>
<U_SA>CM</U_SA>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>SE</OBJTYPE>
<INAME>%CELL2</INAME>
<CAPTION>New Column 2</CAPTION>
</item>
</T_CAPTION>
</sf:SECTION>
</sf:OBJ>
- <sf:OUTATTR>
- <sf:OUTATTR>
- <NAME>
<INAME>%OUTATTRIB5</INAME>
</NAME>
<T_NEWCELL>X</T_NEWCELL>
<U_WFRAME>PT</U_WFRAME>
<U_WBOXV>CM</U_WBOXV>
<U_WBOXH>CM</U_WBOXH>
<U_WLEFT>CM</U_WLEFT>
<U_WWIDTH>CM</U_WWIDTH>
<U_WTOP>CM</U_WTOP>
<U_WHEIGHT>CM</U_WHEIGHT>
- <BORDER>
- <LEFTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</LEFTATTR>
- <TOPATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</TOPATTR>
- <RIGHTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</RIGHTATTR>
- <BOTTOMATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</BOTTOMATTR>
</BORDER>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>OA</OBJTYPE>
<INAME>%OUTATTRIB5</INAME>
</item>
</T_CAPTION>
</sf:OUTATTR>
</sf:OUTATTR>
- <sf:SUCC>
- <sf:item>
- <sf:NODE>
<NODETYPE>TI</NODETYPE>
- <sf:OBJ>
- <sf:TEXT>
- <NAME>
<INAME>%TEXT1</INAME>
</NAME>
<CAPTION>New Text 1</CAPTION>
<APPMODE>P</APPMODE>
- <TEXT>
- <item>
<TDFORMAT>*</TDFORMAT>
<TDLINE><(>&<)>w_mkpf-mblnr<(>&<)></TDLINE>
</item>
</TEXT>
<STYLE_NAME>SYSTEM</STYLE_NAME>
- <TEXT_AREA>
<ENABLED>F</ENABLED>
<NCOLS>0</NCOLS>
<NROWS>0</NROWS>
</TEXT_AREA>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>TI</OBJTYPE>
<INAME>%TEXT1</INAME>
<CAPTION>New Text 1</CAPTION>
</item>
</T_CAPTION>
- <T_TEXT>
- <item>
<SPRAS>E</SPRAS>
<TXTYPE>F</TXTYPE>
<FORMNAME>ZSUM_SMART</FORMNAME>
<INAME>%TEXT1</INAME>
<LINENR>000001</LINENR>
<TDFORMAT>*</TDFORMAT>
<TDLINE><(>&<)>w_mkpf-mblnr<(>&<)></TDLINE>
</item>
</T_TEXT>
</sf:TEXT>
</sf:OBJ>
<sf:SUCC />
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:item>
- <sf:item>
- <sf:NODE>
<NODETYPE>EV</NODETYPE>
- <sf:OBJ>
- <sf:EVENT>
- <NAME>
<INAME>%EVENT3</INAME>
</NAME>
<CAPTION>Footer</CAPTION>
<EVTYPE>F</EVTYPE>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>EV</OBJTYPE>
<INAME>%EVENT3</INAME>
<CAPTION>Footer</CAPTION>
</item>
</T_CAPTION>
</sf:EVENT>
</sf:OBJ>
<sf:SUCC />
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:PROC_CTRL>
</sf:WINDOW>
</sf:OBJ>
- <sf:OUTATTR>
- <sf:OUTATTR>
- <NAME>
<INAME>%OUTATTRIB1</INAME>
</NAME>
<CAPTION>New Display Option</CAPTION>
<U_WFRAME>PT</U_WFRAME>
<U_WBOXV>CM</U_WBOXV>
<U_WBOXH>CM</U_WBOXH>
<WLEFT>2.50</WLEFT>
<U_WLEFT>CM</U_WLEFT>
<WWIDTH>16.00</WWIDTH>
<U_WWIDTH>CM</U_WWIDTH>
<WTOP>2.50</WTOP>
<U_WTOP>CM</U_WTOP>
<WHEIGHT>25.20</WHEIGHT>
<U_WHEIGHT>CM</U_WHEIGHT>
- <BORDER>
- <LEFTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</LEFTATTR>
- <TOPATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</TOPATTR>
- <RIGHTATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</RIGHTATTR>
- <BOTTOMATTR>
<THICKNESS>0.00</THICKNESS>
<THICKNESSU>PT</THICKNESSU>
<DISTANCE>0.00</DISTANCE>
<DISTANCEU>CM</DISTANCEU>
- <COLOR>
<RED>000</RED>
<GREEN>000</GREEN>
<BLUE>000</BLUE>
<TRANS>000</TRANS>
</COLOR>
</BOTTOMATTR>
</BORDER>
- <T_CAPTION>
- <item>
<LANGU>E</LANGU>
<FORMNAME>ZSUM_SMART</FORMNAME>
<OBJTYPE>OA</OBJTYPE>
<INAME>%OUTATTRIB1</INAME>
<CAPTION>New Display Option</CAPTION>
</item>
</T_CAPTION>
</sf:OUTATTR>
</sf:OUTATTR>
<sf:SUCC />
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:item>
</sf:SUCC>
</sf:NODE>
</sf:PAGETREE>
</sf:item>
</sf:VARHEADER>
</sf:SMARTFORM>
And here is the program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
                    http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF Itab1 OCCURS 0.
        INCLUDE STRUCTURE MKPF.
DATA: END OF Itab1.
data: w_mkpf type mkpf.
DATA : v_fmname TYPE rs38l_fnam.
SELECT * FROM MKPF into table itab1 up to 100 rows .
At the end of your program.
Passing data to SMARTFORMS
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = 'ZSUM_SMART'
VARIANT                  = ' '
DIRECT_CALL              = ' '
    IMPORTING
     fm_name                  = v_fmname
EXCEPTIONS
NO_FORM                  = 1
NO_FUNCTION_MODULE       = 2
OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION v_fmname
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    itab1                      = Itab1
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi,
To display the value of variable it must be added in correct way. It means the variable should be added to the text object of the form with help of drag&drop or manually with help of icon "+" - Insert field. After insertion the variable should be gray colored in editor..
May be this is the point????
Best Regards
Adam

Printing double line / small box residing in main box - Invoice smartform

Hi,
I have 2 Invoice smartforms, meant for Country_A and Country_B. We r on ECC 6.00
Country_A is printing fine.
But, when comes to Country_B, in ITEM table, the header box, (where column labels are printed), one more box is printing!! it looks like (not exactly) instead of single line ________ its printing ======, so, pls. let me know, Wht culd be the reason?
Thank you

Hi,
Check that if you used table borders in attributes of line types.
And also check if you are using sy-unline...
Regards,
Shankar.

Box inside another box in SMARTFORM for hierarchical item data printing

Hi All,
I need to put a <b>box inside another box</b> and <b>both the boxes need to be bordered</b>. There are 2 levels of main data to be printed in the 2 boxes. Header data will be printed in the outer box and corresponding to each header row a number of line items will be printed in the inner box.
There will be multiple numbers of headers as per requirement. How can this feature be implemented in SMARTFORM / SAP-script?

Hi ,
You can try using a combination of variable window and main window to achieve what you are lookoing for.
You will have to use Main window instances such a way similar to newspaper printing.
Cheers
VJ

Dynamic box in smartforms

hello gurus,
i have to populate dynamic boxes this is the scenario any ideas...i mean how can i put this in smartform way...
I
f gift order <> 1
Determine how many VALUES we have based on ship_charge, subtotal, promotion_amt and order_total.Think the max is 4
Based on this count this determines the number of boxes
This count will also determine which values are output
Need to consider if promotion amount is negative then need to put negative sign before '£' sign
Else.
No boxes/prices are shown
Endif.

HI ,
Use tables .
right Click->create->tabels
In data tab , in loop to
give the name of the internal table and work area
as : it_ekpo into is_ekpo
In tables tab click details button
Under line type 1 specify the size for each row of the table.
The toal size of all the columns should not exceed the total window width .
In the same line as details u can see the lines and boxes . using that u can fill the borders of the cell with lines . Click on the cell and select the appropriate line . When u display the line will be displayed as the border of the cell .
Save chek activate
Right click on main area and click tabline.
Under line type specify the line type created in table .
Then in each cell right click and create text . and put variable as
&is_abc-ebeln&.
Regards

Smartforms - Is it possible to Customize Cell Border In Template in 4.6C

Hi,
In smartforms, i know that Customizing Cell border is possible with node type TEMPLATE in version 6.20
Our system is 4.6C
But there are many differences between 4.6C and 6.20 about SMARTFORMS.
Is there a way to specify custom cell border without "Select Pattern" option with node type TEMPLATE in 4.6C
thanks
ibrahim

Hi,
As you identify there are some large differences between Smartforms in 4.6c and 6.20. So there is no equivalent of the cell-specific borders in 4.6c
Regards,
Nick

Smartform Printing - TableLine Border not printing

Dear All,
           I tried smartform for PO printing. Once I completed all the code and configured for my dot matrix printer ie., Epson 9 Pin,
When I take printout, the tableline borders are not printed. I tried with framed pattern also.
Kindly provide a solution for this issue.
Note: When I used PDF printer for PDF conversion, everything was fine with PDF format.
Regards,
S.Sridhar

Hi,
     while printing with dot matrix the lines of template and tables ,some times will not printed because the dot matrix printer will   not capture the lines with low width so you just increase width of line to 20 TW and then there will be pattren in tables tab select upper frame and lower frame for line which is not printing . this will solve your issue
Best Wishes
   Pavan

Form ,Table with borders not printing in other Printers

Hi All,
I am trying to print a smartform with original language as Arabic .
When I am taking a print out with Laser Jet printer , the table is coming with borders and everything is perfect .
But when I am trying to take out print with other printers ,Table borders are not showing up .
Please let me know the cause of this issue .

Hi Joe,
You can check with your SPAD configurations.
SPAD->Device Type->Attributes Tab
If its a dot matrix printer it won't print vertical lines. Different printers have different print margins. This could be also a reason as you are shifting different printer types on the same smartform.
Edited by: K.Manas on Jan 17, 2011 10:22 AM

Header Line - Smartform

Hi Frds
In my smartform output(Print Preview) the header line is coming THICKER .
How to reduce it ?
Thanks
Pari Vendhan.R

Hi,
As you are working with smartforms, check out the options of borders and shading if you are talking about the header lines.
If you are mentioning about the content in the header, use of smartstyles (Tcode: SMARTFORMS/SE72) definitely helps. Create a new smartstyle with the desired fonts and all and assign this to the header which would cater your requirement.
Regards,
Narendra.

Data printed incorrectly on the second page of smartform

Hi all,
I need to create a smartform where I have to print the header details at the start and then below that details for all line items for a particular document.
so i have data ;ike :
Header data :
field 1 : field 2:
Field3 : field4:
field5: field6:
Item data :
field1 field2 field3 field4 --> Item 1
field1 field2 field3 field4 -->Item 2
field 1 field2 field3 field4 -->Item3
For the Header data,Im planning to use a template in a secondary window.
However for the item data,i need to use a table (As i know the no of records only at runtime).Also another reason for usng table would be that I dont need the header on each flloowing page but only the Line item details on the following pages.
However I am facing an issue now:
At the end of the first page,2 fields of the line item data are printing and the remaining 2 fields are printing on the next page BUT after the 1st row !
Can anyone suggest why this is happening?

probably a difference in height between the 2 columns of the left and of the right (check paragraph and character formats, cell margins, borders, etc.)

Smartform Borders

Similar Messages

Maybe you are looking for