SmartForm execution does nothing - error

When I execute this SmartForm it does nothing. If I try to preview it nothing comes up and when I try to print it nothing goes to the print spool. However, if I remove the address node then it works fine. Does anybody have any ideas?
I am also wondering what table the address node hits (uses for the address).
Regards,
Davis

HI,
1) To create an address node , call the context menu for that node in the tree structure that one wants to contain the text and choose create->text
2) Enter a name for the node and a description
3) Determine the address type on the general attributes tab
4) For organizational addresses one has to specify the address number, for any other one has to specify the person number and the address number
5) In the box additional addresses one can maintain other attributes to specify how to display the address
Regards
Sudheer

Similar Messages

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Mapping executes without error, but does nothing.

I've created 21 mappings. 20 mappings work flawlessly and one gives me headaches!
The mapping is from type: PLSQL.
It's using an external table to access an 554MB textfile. The OS is RedHat Enterprise Linux WS release 3, Oracle 9.2.0.5, OWB 9.2 + latest patch.
When I validate the mapping -> everything is okay.
When I execute the mapping via OEM -> Success message -> in audit browser: 0 rows inserted.
When I execute the mapping manually -> Success message -> 0 rows inserted.
When I look at the target table -> 0 rows.
When I do "select count(*) from external_table_20", I get the correct count for records!
When I do "create table temp1 as select * from external_table_20 where 1 = 0" I get the correct table structure.
When I do "insert into temp1 select * from external_table_20", sqlplus blocks for about 10 seconds, but then there are 0 records inserted.
There are no errors in the kernels logfiles (no read, write or media errors).
There is no error message in SQLplus.
There is no entire in the alert file of the database.
It just does nothing!
I drop the mapping, the target table and the external table -> and recreated them again (one at a time) -> Same as above. I can count the external_table but the mapping doesn't insert any data. I still can't insert the table on myself.
So, what can I do now? There is enough space on every tablespace left -> just in case I extended all of them to make sure there will be at least twice as much space as 554 MB (the size of the textfile).
Its ervy strange that there is not a single error message or warning!

Art,
The external tables are tricky because if you make one trivial mistake when describing the records (such as a wrong field length or type), the end result will be that the query against the FT will return no errors, but there will be zero or some weard number of records returned. I suggest to check again the record description and to try to select from the external table (after it is deployed) from SQL plus.
Also, when configuring the flat file in OWB you can define the log file that will trace FT creation errors during deployment and a Bad file name that will direct the database to write records not fitting into the FT definition to the location specified in 'Bad file name'.
These configuration parameters can be of help when struggling with the issues mentioned above.
Regards:
Igor

Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.

Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.
Bridge worked great for a while then started to fail when starting. Old Bridge CS6 still works fine. HELP ... please.

You problem is in the Fault Module MSVCR80.dll
Do a web search for this. Here is one LINK

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don't know what that signifies. Help?

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don’t know what that signifies. Help?
It is recommended that I ask for help, which put me here. What I really need is some customer service — not a chat room!

If Windows :
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from C: > Program Files > Adobe Photoshop CC 2014 .
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
It should update.
If Mac:
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from Applications folder:
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
Let me know if you face any error .
Error 49 occurs while updating the application , when Creative Cloud app does not have reference / Access to installed CC app, so that it can apply updates for the same .
You can try to update from CC app like Photoshop itself and check.

Since uploading Maverick, my Microsoft apps give an error message "(the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. What to do?

Since uploading Maverick, all of my Microsoft apps give an error message "(name of the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. I have to click on the "OK" button to get rid of the error message. What to do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

When I try to launch my copy of PSE it tells me that licensing for this product has stopped working. Error code 150:30. Restarting does nothing. Thanks!

When I try to launch my copy of PSE it tells me that licensing for this product has stopped working. Error code 150:30. Restarting does nothing. Any ideas?
Thanks!

You haven't said what version of PSE you are using but the general solution to this problem is to re-install the product from your original disks. Have you got the disks for your product and the related serial number?

Startup stuck, does nothing and no error

Hi,
I'm experiencing something never saw: while trying to startup the instance, the command stuck.
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Feb 16 16:31:26 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
no messages, no errors, the instance continues to be down.
I don't really know what I should check!
Any suggestion?
Thanks in advance

I'm using ASM.
When I created the database, dbca created an spfile on +ARCHIVELOG/EVODB/spfileEVODB.ora.
After some my bad actions I deleted the spfile.
The pfile contains: SPFILE='+ARCHIVELOG/EVODB/spfileEVODB.ora'
I tried to startup the instance with an other pfile, created by dbca during the installation.
The instance starts without problem.
Now my whish is to restore the spfile in the right position, but the command create spfile from pfile creates the spfile into folder +/u01/app/oracle/product/11.1.0/db1/dbs+.
I also tried to execute create spfile='ARCHIVELOG/EVODB/spfileEVODB.ora' from pfile+, but the startup hang, it does nothing, it does not write anything in any alert/trace file and it does not raise any error.
Samuel

TS1372 error 1601 ipod classic ipod appears dead does nothing

my ipod classic about six months old just all of a sudden does nothing. Screen totally blank tried to reset just get error message 1601 usb device not recognized. Dont know what to do really cant afford repair or replacement any help would be appreciated.
Thanks

If it is six month old, bring it in to Apple Store for the Genius to have a look, they may get you a replacement if it is not water damaged since it is under warranty.

I click "download now" in iTunes, it does nothing. Plus, I try to access some things in iTunes, get Error 504.

We bought 2 iPhone 4S phones, they seem to be working fine.
Our 2 iPod Touches seem to be running a little slow, so I want to update them, but iTunes needs to be updated first.
I have to manually tell it to check for updates although my preferences are set to do it automatically.
I click "download now" and it does nothing.
When I try to access certain things within iTunes (example: My Wish List), I get Error 504.
Running Windows 7 64 bit, have tried update through Firefox and IE.

In a kind of related subject, I've been trying to access my "wishlist" for the past 20 minutes and nothing is showing up. I tried adding things to my wishlist and I got nothing.....?

Start up error with unlock button doing nothing

So, when i close my laptop for the night, the next mourning i start it up again, but this time it just comes up with a blank screen, with 3 buttons: unlock, timer, and exposer. Timer and exposer well, just made the 3 seonds apper and exposer do its thing too of course, so when i try clicking unlock, it blinks, but then does nothing. I try turning it off and on again, but still the screen. Please post a solutin to this problem. If it helps, here is the screen i talking about: (its in the attachments).
EDIT: also i forogot to mentstion this isnt the first time this happened... about 7 mounths ago it happened, and for four monuths it was just on that screen, then finally it randomly unlocked. I don't know what I did to unlock it, but anyway it was stuck for 4 mounths and i would hate to wait four monuths to record another video again... so please, still, post a solutin.
Also, heres some info about my laptop:
Toshiba Satellite C55t-A5222
Cracked Screen (Still works with crack but trackpad doesnt work and touchscreen wont work on one of the sides of the crack (the crack goes diagnal across my laptop touching the top and bottem also goes straight to the top fast, and part of the crack that touchscreen wont work on is the part that coveres about %75 percent of the screen))
Solved!
Go to Solution.
Attachments:
image.jpg ‏208 KB

your support site is here.
It appears this has something to do with Windows 8 Camera App. See this link for more information.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

ITunes 12.1.1.4 on Windows 8.1 OS. Player/controller does nothing. Fixes?

I installed iTunes 12.1.1.4 on Windows 8.1 OS. When trying to play any song, the player/controller does not do anything. No errors, just does nothing. Any ideas of causes or how to fix?

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

External content list doing nothing

I am attempting to create an external content list in Sharepoint designer and when I click on it, it literally does nothing. No error code, nothing. Has anyone ran into this problem before?
Sharepoint Online
Azure SQL database
Any other info you need?

Hi,
According to your post, my understanding is that you want to make an external list form Azure SQL database in SharePoint Online.
Please make sure you create external list correctly.
In addition, you need to grant permissions to the people who will use the list.
For more information, please refer to:
Make an External List from a SQL Azure table with
Business Connectivity Services and Secure Store - SharePoint Online for enterprises
SharePoint Online – How to display an External Azure Database as a list
Surfacing Data from SQL Azure in SharePoint 2013 Online (Office 365)
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Jason
Jason Guo
TechNet Community Support

SQL execution does not change, but consistent read get higher

Hi,
Our SQL query execution does not change, but consistent reads get higher in our test enviroment but query looks fine in our development and production environments.
In the Development instance the trace is:
STAT #18446744071526492680 id=1 cnt=1 pid=0 pos=1 obj=7151 op='TABLE ACCESS BY INDEX ROWID MEMBER_CMS_SITE_ACCESS (cr=4 pr=0 pw=0 time=153 us cost=3 size=68 card=1)'
STAT #18446744071526492680 id=2 cnt=1 pid=1 pos=1 obj=7152 op='INDEX UNIQUE SCAN MEMBER_SITE__MEMBERID_SITEID (cr=3 pr=0 pw=0 time=104 us cost=2 size=0 card=1)'
So - we read 3 blocks from the index and then 1 from the table ( to make 4)
In the Test instance the trace is:
STAT #18446744071411593144 id=1 cnt=1 pid=0 pos=1 obj=7151 op='TABLE ACCESS BY INDEX ROWID MEMBER_CMS_SITE_ACCESS (cr=112 pr=0 pw=0 time=2820 us cost=3 size=70 card=1)'
STAT #18446744071411593144 id=2 cnt=1 pid=1 pos=1 obj=7152 op='INDEX UNIQUE SCAN MEMBER_SITE__MEMBERID_SITEID (cr=3 pr=0 pw=0 time=90 us cost=2 size=0 card=1)'
We read 3 blocks from the index but the table needs 109 more which cannot possibly be right.
It looks like we are applying UNDO and those 109 are the work needed to do so.
I have tried flushing the shared pool, and killing some sessions that could possibly be the cause... but with nothing in V$TRANSACTION
I could understand this if there was a long-running transaction that's created a lot of dirty blocks, but there are no transactions at all... so it's not that.
Thanks

The SQL is very simple with only one predication in the where cluse and that is indexed,just like
"select * from table where a=:b0"
Column a is indexed. But ORACLE choose FTS not INDEX SCAN because of out-of-date stats maybe.
So I updated the stats expecting to see ORACLE will choose INDEX SCAN. The fact is that ORACLE will not change existing FTS to INDEX until I flush the entire share pool.That's the problem.

What does this error message when I try to do updates mean? And how can I fix it? Thanks. The operation couldn't be completed. (NSURLErrorDomain error -1012.)

What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

SmartForm execution does nothing - error

Similar Messages

Maybe you are looking for