Smartform: Formatting Problem with QUAN-Field

I want to print a smartform and get exception 1 (formatting error). With function SSF_READ_ERRORS I get an error table. There is on entry: errnumber = 020011, msgid = SSFCOMPOSER, msgty = E, msgno = 601, msgv1 = wa_outtab-menge.
It seems to be a formatting problem with field WA_OUTTAB-MENGE. But in the structure this field is referenced correctly.
Does anybody know a solution?

I solve this kind of problem in my SmartForm.
Try this:
Go to "Global Definitions" Node, then "Current/Quant.Fields" tab and set these values:
Field Name: WA_OUTTAB-MENGE
Reference Field: WA_OUTTAB-MEINS
Data Type: QUAN
Best Regards,
Eduardo Ribeiro.

Similar Messages

Problem with currency field in smart form

hi
friends ..
i had problem with currency field in smartform iam printing 5 currecny
fields after the main window .But not getting printed on right way gets printed down from the given mesaurement and i get lot of gap betwen the
each fields for ex.
33,260.00
120.00
0.00
0.00
0.00
i thought the the problem is with space .so iwanted to condense it but cannot as it is currency field so move into character fields .but the user want out put in currency format like 22,60.20 if i get the value in char variable i get 2260.20 which i dont want .
so pls help me how to condense or shift left and print the currency field on right place.
regards
answers will be rewarded points.

hi,
this is a normal problem u can avoid this by moveing these currencu value to a character field then print the char field us ing condece... &var(C)&..
eve if not solve the problem use the TEMPLATE node..
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

Problem with a field set to refresh after insert at Row level

hello all,
i have a problem with a field (a serial) which is set by a db trigger at insertion. The field "refresh after insert" is properly set in the Entity and everything is refreshed correctly when i insert data via an adf form in a jspx but when i want to insert programmatically nothing is refreshed. I insert data this way :
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
newRow.setAttribute("mandatoryAttribute1",value1);
newRow.setAttribute("mandatoryAttribute2",value2);
<more init here but not the serial since it will be set by the DB trigger>
insertVO.insertRow(newRow);
but when i want to get back the value with "newRow().getAttribute("TheSerial");" i always get a null back and not the value set by the db trigger.
One way to get the serial is to commit after each insert but i don't want to commit between inserts.
i've tried to unset the refresh after insert and override the createDef() method to setUseReturningClause(false) as it's is advised in chapter 26.5 of the ADF 4GL dev. guide but in this case i have an exception JBO-29000: JBO-26041.
How can i get the value back properly ?
thanks
-regards

The data for the newly created row doesn't get inserted into the database until the commit is executed, so the insert trigger isn't called.
If you need to get the value without committing, then you should implement the trigger programmatically and drop the trigger from the database. The code below shows how you could do this.
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
SequenceImpl seq = new SequenceImpl("MY_SEQ", insertVO.getDBTransaction());
Long next = (Long)seq.getData();
newRow.setAttribute("primaryAttribute", new Number(next));
...You will need to replace MY_SEQ and primaryAttribute with the correct values for your example, but this should acheive what you want.

Whatsnew page for 3.6.17 has formatting problems with Firefox and I.E.

I just updated from 3.6.16 to 3.6.17n and the whatsnew page, displayed after Firefox restarted, has formatting problems in the lower right hand corner.
I checked it with I.E. 8 and it also shows the formatting problem.
Why wasn't this caught before the page was put into "production"?
The URL is http://www.mozilla.com/en-US/firefox/3.6.17/whatsnew/
There is a line with the text "Release Notes » Firefox Features » Firefox Help »" that is being displayed on top of other material.
I wonder what a new Firefox user or an inexperienced user would think of this? They might think that they did something wrong or, worse, they might consider Firefox had problems and they won't use it.
This reflects badly on Firefox.
One more thing, could someone make this textarea taller and wider. It is so small as to cause problems typing and proofing the material.
The URL is https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=whatsnew+page+for+3.6.17+has+formatting+problems+with+Firefox+and+I.E.&showform=1
How about upping the cols and rows values? They are currently rows="10" cols="40"

As you have a Power Mac you also have a alternative option to consider which is a third-party build from http://tenfourfox.blogspot.com/2011/08/601-now-available.html

Problem with Date fields in Search panel

Hi all,
I use TP2 and in my jspx page I have a search panel with two date fields and table where the results is displayed. But there is a problem with these date fields, because when I search dates the results is nothing even I retype the date from table. Also I have other pages where this problem exist with same structure.
Could somebody help me with some advice?
Thanks in advance!

Hi Frank,
Thanks for the answer.
I use the standart method to make search panel with drag and drop the data control to the page. The other search panel fileds work fine, only the date fileds are problem. Maybe something in view object doesn't work properly.
Here I post the code from my page.
<table border="1" style="margin:5px;">
<tr>
<td>
<af:showDetailHeader text="ТЪРСЕНЕ" disclosed="true"
inlineStyle="width:780px;">
<table cellspacing="2" cellpadding="3" border="0">
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.EGN.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.EGN.inputValue}"
label="#{bindings.EGN.hints.label}"
columns="#{bindings.EGN.hints.displayWidth}"
maximumLength="#{bindings.EGN.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.LNC.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.LNC.inputValue}"
label="#{bindings.LNC.hints.label}"
columns="#{bindings.LNC.hints.displayWidth}"
maximumLength="#{bindings.LNC.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.AccPersonID.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.AccPersonID.inputValue}"
label="#{bindings.AccPersonID.hints.label}"
columns="#{bindings.AccPersonID.hints.displayWidth}"
maximumLength="#{bindings.AccPersonID.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.PersonName.hints.label}"/>
</td>
<td align="left" colspan="5">
<af:inputText value="#{bindings.PersonName.inputValue}"
label="#{bindings.PersonName.hints.label}"
columns="#{bindings.PersonName.hints.displayWidth}"
maximumLength="#{bindings.PersonName.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.DateFrom.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateFrom.inputValue}"
label="#{bindings.DateFrom.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateFrom.format}"/>
</af:inputDate>
</td>
<td align="right">
<af:outputLabel value="#{bindings.DateTo.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateTo.inputValue}"
label="#{bindings.DateTo.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateTo.format}"/>
</af:inputDate>
</td>
</tr>
<tr>
<td align="right">
<af:commandButton actionListener="{bindings.Execute.execute}"
text="#{bundle.FindBtn_LABEL}"
disabled="#{!bindings.Execute.enabled}"
icon="/images/find.png"/>
</td>
<td align="left">
<af:commandButton text="#{bundle.FindClearBtn_LABEL}"
icon="/images/find_clear.png"
action="#{PeopleBean.onClearVCBtn}"/>
</td>
</tr>
</table>
</af:showDetailHeader>
</td>
</tr>
</table>
Also I have a result table for the search panel, but I don't believe the problem can be there because it works fine when I search in fields different by inputDate.
Do you have any suggestions?

Problem with number-fields in csv-Export-Files

Hello,
the export with the csv option works fine and our users like this export-function.
But Unfortunatelly we have some problems with the exported number fields. In my region I defined the field with a format mask.
On the screen it looks fine but when I change to csv the values are exported as text-values.
So in excel the columns are shown with left alignment.
When I try to change the format in excel to number, excel change the column type but not the value inside.
On this account we cannot use the sum-function and the display of the value is wrong (alignment).
Which possibilities do I have to resolve that problem?
Thanks in advance
Ulrike

I have the same issue - Anyone any ideas on how to export currency values in a report to excel as numbers?

Problems with Adding Fields/Columns to Crosstab in XI

Post Author: ph03nix
CA Forum: General
I am having problems with formatting a crosstab report in CRXI and am hoping that someone has a solution.
The crosstab report is a subreport, and requires the following columns, grouped by Firm (also not working optimally, but at least working):
Evaluator, Factor1Rate,[Factor2Rate, .., FactorNRate], Summary, UpdateDate, UpdatedBy
Where:
Evaluator is the person that did the evaluation that resulted in each rating (formula field)
Factor1Rate, etc, may have one, many, or all of these be applicable - there can be up to 15 of these. Each FactorRate column is to display the "rating" given by the Evaluator in the corresponding row/column (this much works). The table heading is a formula, but the corresponding rate is not.
Summary should display "Complete" if and only if there is a Comment field (not displayed) filled out for each FactorNRate that has a value of 0, 1 or 5 - otherwise it is blank
DateEntered is one of 2 fields ("last_updated" , or "creation_date" if last_updated is null - a formula field)
UpdatedBy is the last name of the person who last touched the ratings (formula field)
I have gotten the FactorRates to display in the headers, and gotten the corresponding rates to display underneath them, but I cannot seem to add any other columns to the report - they are either added as headers with the factor_rating columns repeated as subgroups (with incorrect data), or are added under existing headers with duplicates of the ratings. I just want to add one column for each field as if it were a normal (non-crosstab) table.
TIA!

the 3 last files
Attachments:
Z1&Z2.vi ‏19 KB
tau_inn (SubVI).vi ‏16 KB
tau_ut (SubVI).vi ‏10 KB

Problem with Date-Field

Hi,
I have a problem with a date-field. Maybe I must describe the problem more detailled, but first I just want to ask you, if you know the following error-message: "21.10.2010 kommt nicht in der Menge der erlaubten Werte vor". I don't know the correct translation but it must be something like this: "21.10.2010 does not occur in the quantity of the permitted values". I don't find the position in the sourcecode of this message. And I know, that this message isn't thrown by a functionblock from SAP. So what is the describtion of this message?

Yes I have a date field in my form. Ok I must describe it more detailled. I have an employee searchfield. After select an employee you see a form. After filling the form you click on "Send". It creates a ticket and sends the data to the Backend and jumps back to the employee search field. Untill this point everything works fine. There is no problem with the datefield. Now I want to create the form. I choose an employee and fill the form. But now it comes this message. But not after clicking the "send" button. The message comes after changing some data (e.g. change a radio button). So it looks like a validationproblem, but only at the second creationprocess. Maybe the first date is in some cache? I don't know...

Problem with decimal fields using BADI For PD Infotypes

Hi,
I'm implementing BADI HRBAS00INFTY.
For reading the fields of infotype , I'm using the substring
of the field NEW_INNNN-VDATA .
I have a problem with fields of type DEC.
In field NEW_INNNN-VDATA it looks like this : '####'
I believe that the possible reason for this is conversion from DEC to CHAR
But I don't know how to fix it.
Thank you .
Message was edited by: Alon Lozinsky

Hi Alon,
We had same issue. Use following code.
data: hri1011_str type hri1011.
move new_innnn-vdata to hri1011_str.
HRI1011_STR fields will have decimal values.
Let me know if you still have any issues. If solution works, kindly do Point Recognition.
-Bharat

Problem with number field

Hi,
I'm using ADO (Oracle Provider for OLEDB) to connect Oracle 9. If the type of any field in table is Number(9) and I open query with this field, all negative values are displayed as positive values. For example: If I write -1 value to this field and then post the dataSet (Delphi7 - TADOQuery) value is refreshed to 1. Real value in database is -1.
Could anybody help me with this problem?
Regards Jan.

Once again :)
I finally foud out that Deplhi does support (varDecimal), but delphi TCustomADODataSet (ADO recordSet wrapper) component incorrecltly treats such field type. It regards Decimal(<9,0) as integer (TIntegerField) but when it gets value from underlying ADO recordset it expects integer variant. So it's delphi problem. I hat to fix this problem in source code of this component.
Regards Jan.

WHERE clause in a SMARTFORM loop, problems with parenthesis

Hi all gurus,
a simple question: I'm coding a LOOP in the form builder for a smartform ... this simple loop should bind text elements to every position of a purchase order. The WHERE clause should be as follows:
WHERE GUID = WA_ITEM-GUID
AND ( TDID EQ 'ZDES' OR TDID EQ 'ZDST' ).
Anyway, in the Form Builder I didn't find a way to add parenthesis; I workarounded the problem with the following query:
(conditions in lines are in AND conjunction)
GUID EQ     WA_ITEM-GUID
TDID      EQ   'ZDES'
OR
GUID EQ     WA_ITEM-GUID
TDID      EQ 'ZDST'.
It's quite a 'bad' way, but it works. I wonder if there's a way to express "complex" WHERE clauses (with addiction of parenthesis) in Form Builder.
Thanks in advance

In this case, your solution is the one that works. However in more complex cases with more variables, this can proove difficult to make or mantain.
What I usually do is use the first part of the condition in the where and then add a condition to the printing area with the rest of the formula. Just remember to document this so that you'll find it easy and it's way more amintainable.
In this case the loop would contain WHERE GUID = WA_ITEM-GUID and the inside condition TDID EQ 'ZDES' OR TDID EQ 'ZDST. This creates the and between the two blocks.

Problem with date fields in where clause after changing driver

Hi,
We have changed the oracle driver we use to version 10
and now we have some trouble with date-fields.
When we run this SQL query from our Java program:
select *
from LA_TRANS
where LA_TRANS.FROM_DATE>='20040101' AND LA_TRANS.FROM_DATE<='20041231'
We get this error code:
ORA-01861: literal does not match format string
The query worked fine whit the previous driver.
Is there some way I can run a SQL query with date fields
as strings in the where clause?
Thanks!

Keeping the argument of standard SQL or not aside, comparing DATE columns to a constant string (which looks like a date in one of the thousands of the formats available, but not in others) is NOT one of the best programming practices and leads to heartburn and runtime errors (as you have seen yourself).
I would rather compare a DATE to a DATE.
Also, constants like that would be another issue to fix in your code:
http://asktom.oracle.com/pls/ask/f?p=4950:8:6899751034602146050::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:528893984337,

Problems with reference field in material type

Hi,
I have problem with field reference in material type creation.
When I define a self-defined field reference ZERS (copy of standard field reference HERS) for a own defined material type ZERS (copy of material type HERS), I get the following error message:
Field reference ZERS has not been set up
Message no. CZ127
Diagnosis
You have specified a field reference that has not been set up.
Procedure
Set up the new field reference or use an already existing field reference.
I do not understand why because the entry ZERS is present in table T130A.
Here is the IMG config I have made:
1. Logistics general->Material Master->Field selection->Maintain field selection for Data Screens (here I made copy of field reference HERS and named it ZERS)
2. Logistics general->Material Master->Basic Settings->Material types->Define attributes of Material types (here I made a copy of material type HERS and named it ZERS. I then tried to set the field T134-FLREF "Field reference" to ZERS, but then the error message appears)
Does anyone know what config I am missing?
Or any reason why the error message CZ127 is coming up?
Thanks

Must have been system error, I deleted all entries and did it all over again, it worked.

Problem with Hiding fields of selection screen which is called as subscreen

Hello All,
I have problem while hiding the selection screen which is called as subscreen.
Flow of my logic:
Selection-screen with one field and three buttons CREATE,DISPLAY and CHANGE in application toolbar.
user enter some value in field and either he press change or dispaly
When change i need to call selection screen when it is in dispaly i need to stop calling this selection screen.
Upto my knowledge we can't stop calling selection screen in display mode so there is only one possibility is hiding the fields when it is in display mode.
How can i hide the fields and where i need to hide fields?
Please post some codes.
Regards,
Lisa

you can refer the sample code which i mentioned in your previous post. that will solve the problem.

Modifying the Ad-hoc Query Infoset : problem with P9105 fields.

Hi all,
Am having problem with Infoset of Ad-hoc Query .
i need to add the Critical role Field Group to ZHR_PA_01 Infoset of Satandard Area.
for this i have imported that Infotype 9105 and included the following standard fields by drag and drop.
                1. Role Category
                2. Role SubCategory
                3. Global Identifier
                4. Personnel Number
and then Saved and Generated the infoset succesfully.(No syntax errors)
But
While testing, using the T-Code: S_PH0_48000510
if i select one of these above fields for the report,
Am getting the message that "Error when generating the report".
Error Description:The report cannot be generated because the internal description is invalid or incomplete.
means what may be the problem.?
if i select other fields its working fine.
can any body explain me clearly..??
Regars,
Kalam A.

Hi Manoj,
yes, i have saved the T-code.and generated the Infoset Succesfully.
and its showing the those additional fields while testing.
for remaining fields its working fine.
but am not getting wats problem with the four fields of P9105 infotype.
could you please suggest me.?
Regards,
Kalam A.

Smartform: Formatting Problem with QUAN-Field

Similar Messages

Maybe you are looking for