Smartform : how can i strech the box in main screen

i design form with one screen  , simple .
but when print it  , the box ( with the data )
in the border is not get to the bottom of the page  , why  ?
when i look at the form painter i don't see that
i have place to stretch it more down .
is there any attribute that i have to set ?
The page is a4 .
thanks.

Hi,
If the amount of data displayed is not sufficient to fill the page,the border won't get to the bottom of window. If you want to get the border till the end of window, check the window border option ( Box and Shading -> Frames) in the output option of the window.
Hope this will solve your issue.
Regards
Jaison.

Similar Messages

  • How can we use list box on selection screen

    hi, howe can we use list box on selection screen and how can we populate the dat ainto the list box and how can we retrive data based on list box from ther database.
    thanks in advance
    raju

    Use the VRM_SET_VALUES function module.
    DATA: list              TYPE vrm_values,
          value             LIKE LINE OF list.
               AT SELECTION SCREEN OUTPUT
    AT SELECTION-SCREEN OUTPUT.
      name = 'P_OBJECT'.
      CLEAR list.
      REFRESH list.
      CLEAR value.
      value-key = '1'.
      value-text = 'Development Class'.
      APPEND value TO list.
      CLEAR value.
      value-key = '2'.
      value-text = 'Program'.
      APPEND value TO list.
      CLEAR value.
      value-key = '3'.
      value-text = 'Function Module'.
      APPEND value TO list.
      CLEAR value.
      value-key = '4'.
      value-text = 'Database Table'.
      APPEND value TO list.
      CLEAR value.
      value-key = '5'.
      value-text = 'Structure'.
      APPEND value TO list.
      CLEAR value.
      value-key = '6'.
      value-text = 'View'.
      APPEND value TO list.
      CLEAR value.
      value-key = '7'.
      value-text = 'Data Element'.
      APPEND value TO list.
      CLEAR value.
      value-key = '8'.
      value-text = 'Table Type'.
      APPEND value TO list.
      CLEAR value.
      value-key = '9'.
      value-text = 'Class / Interface'.
      APPEND value TO list.
      CLEAR value.
      value-key = '10'.
      value-text = 'Type Group'.
      APPEND value TO list.
      CLEAR value.
      value-key = '11'.
      value-text = 'Domain'.
      APPEND value TO list.
      CLEAR value.
      value-key = '12'.
      value-text = 'Search Help'.
      APPEND value TO list.
      CLEAR value.
      value-key = '13'.
      value-text = 'Lock Object'.
      APPEND value TO list.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = name
          values          = list
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.

  • Since upgrading to Lion, i am unable to take screen shots.  i get the message that i don't have permission to save files to the place where SSs are saved.  how can i regain the ability to save screen shots?  thanks

    since upgrading to Lion, i am unable to take screen shots.  i get the message that i don't have permission to save files to the place where SSs are saved.  how can i regain the ability to save screen shots?  thanks

    First of all, are you using the OS native screen capture?
    If not, make sure the application you're using has been update for Lion.  I was using Snapz Pro for years, but I need to update it for use with Lion. Meanwhile Grab and the keyboard shortcuts are working on my Lion load.
    If you are using the native capture mode unsuccessfully, I would run the Disk Utility and repair permissions on the drive. For some reason, even in past OS Versions, routine maintenance of permissions makes life a lot easier.

  • I have a 10.2.8 os. I had opened up the AOL logo on the bottom bar. Two aol boxes came up. I can get them to go away for a short time and then they come back. I have not used AOL for 6 years. How can I get the boxes to go away?

    I have a 10.2.8 os on a G4 desktop. A week ago I clicked on the AOL icon in the bottom bar. I have not used AOL for six years. Two aol boxes came up. I can not get the boxes to go away for long. They may go away for 15 minutes and they come back  while I am working. How can I get these  aol boxes to go away?
    I will be upgading to Tiger; 10.4.

    Right click on the AOL icon and select move to trash.

  • How can one change the channel of a screen control within Mainstage?

    The issue that I'm having is that some 3rd party apps (Dimension Pro in particular) seem to receive Sustain (64) messages on only Midi Channel 1
    I'm using a multi zone controller, with sounds set in MainStage to respond to different channels. I've got it all working well except . . Dimension Pro won't "see" a controller message if it's sent from any channel other than channel 1.
    I was even having the same problem with certain sounds in Kontakt.
    So the question is . . how can one shift the channel of these messages over to channel 1?
    Better question, how can I get Dimension Pro to respond to a controller on a channel other than 1, but I suspect this is not the forum for such questions!
    Thanks in advance,
    Mark
    MacOS 10.7.3
    MainStage 2.1.3
    Axiom 61 (2nd gen) keyboard controller

    You may be able to achieve the desired results by a different method. I have an Axiom, but I don't assign zones in it. I just send one zone to Mainstage and handle it all there. You can layer and or split a practically unlimited number of instruments and assign screen controls easily. You probably want to set up all screen controls at the concert level in layout mode. You can later override concert mapping in individaul patches if you want. For instance, you could use an expression pedal for volume(7) on one patch and for modulation(1) on another patch. You can send that control to one instument channel strip or you can choose to send to all. To do this, select a screen control in edit mode. In the screen control inspector, check the overide concert mapping box. You will then see two additional tabs-mappings and unmapped. Select the mappings tab. In the mapping list, double-click "Unmapped". You can the map the screen control to any single  instrument channel strip in this list or send to all. Select one and then choose a mapping destination. If you want to map expression to one instrument and not others there's another way. Select an instrument channel strip, then selct MIDI input in the software channel strip inspector. Check the filter expression box. This instument will now not respond to expression, but the other intruments in this patch will. You can filter some other events on this page. The layer editor tab allows you full control ol splits and layering options of all your instruments in this patch. Hope this helps.

  • How can I reduce the brightness of my screen?

    I installed WIndows 7 on my MAC and after installing the boot camp drivers, the screen went really bright.
    I reduced the brightness to the lowest setting on my keyboard, but it is still bright.
    The problem is not so much on the graphics, its more on the brightness of the white background & black text.
    How can I reduce the brightness?

    ang188 wrote:
    I reduced the brightness to the lowest setting on my keyboard, but it is still bright.
    The problem is not so much on the graphics, its more on the brightness of the white background & black text.
    How can I reduce the brightness?
    Start menu > control panel > appearance & personalization > display > calibrate color
    I would adjust the keyboard setting back to midway before calibrating, this way you have some flexibility to use that again.

  • Ios7 - how can i remove the "passcode" after swipe screen?

    I just upgraded to iOS7and don't want to enter a passcode everytime I turn on my iphone.  How can I remove this passcode?

    Settings>General>Passcode Lock. Enter your passcode lock, turn passcode off, it will prompt for the passcode again and it will then be off.

  • How can i make the select-option selection screen use screen layout?

    I want to make the selection screen like follows.
    no:  xxxxxx   ~   xxxxxx.
    in the screen painter.
    can any expert tell me.
    thank you very much.

    Hi,
    In layout screen for description use text box and for input fields
    use two i/o box.Try follow like as bello code
    For ex: you are going to give date as a select-option:
    textbox      input/out field box   textbox   input/out field box  
    date      :    fkdat-low                to           fkdat-high
    in data declaretion:
    ranges:  fkdat  for vbrk-fkdat.
    in select query where statement:
         where date ge fkdat-low
         and date le fkdat-high.
    Regards,
    Ramya.

  • How can i copy the text in cr11 screen dynamically.

    Hi,
    In cr8 with VB, i can able to copy the text dynamically by using rigth click on cr8 screen and click copy. And able to paste the text in notepad.
    In same way,Rightckick option is not available in cr11 screen with vb.net.For that i created "Contextmenustrip".Now i can able to rightclick and click the copy button.But the text was not able to paste.
    Please help anyone.
    Thanks...

    Sample code for the Winform Viewer event:
    C# sample code:
    namespace CRXIR2_VS2005_GetReportObjectClicked
        public partial class Form1 : Form
            ReportDocument crReport;
            public Form1()
                InitializeComponent();
                // Create an instance of the report
                crReport = new CrystalReport1();
                crystalReportViewer1.ReportSource = crReport;
                    // Ensure you are using CR XI Release 2 and at minimum BusinessObjects XI Release 2 Service Pack 1 (SP1)
                    // and BusinessObjects XI Release 2 Monthly Hot Fix 1 (MHF1)
            private void crystalReportViewer1_ClickPage(object sender, CrystalDecisions.Windows.Forms.PageMouseEventArgs e)
                // Collect the report object name and type.
                string msg = "Report Object: " + e.ObjectInfo.Name.ToString()
                    + " (" + e.ObjectInfo.ObjectType.ToString() + ")";
                // Some report objects won't have text properties; verify that the property isn't null
                if (e.ObjectInfo.Text != null)
                    msg += "... Text: " + e.ObjectInfo.Text.ToString();
                // Display the collected information in a message box.
                MessageBox.Show(msg);
             private void crystalReportViewer1_Load(object sender, EventArgs e)

  • How can I close the giant bookmark search screen that runs along the entire bottom of my browser/window?

    View, toolbars, unclick Bookmark toolbar doesn't close it. It opens everytime I launch the Browser.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I upgraded to iOS 6 on my ipad 3 how can I bypass the connect to ITUNES screen, I upgraded to iOS 6 on my ipad 3 how can I bypass the connect to ITUNES screen

    I udated to iOS 6 and ipad keeps rebooting and displays the connect screen, how do I by pass this screen. I dont have any other appled products.

    It's in recovery mode and can't be used until you connect to a computer and restore it through iTunes.

  • How can I close the Appearance window? screen? from System Preferences?

    I am still trying to get used to my new Intel IMac and was exploring. After I looked at Universal Access, two things happened:1) the menu bar at the top and the display got large and I can't seem to return them to the original setting and 2) the Appearance window now won't go away--it allows me only to minimize it and it seems to be preventing me from accessing System Preferences. I have been working on this all morning and I'm stuck. Please can anyone help?

    A foolish question on my part, perhaps, but have you tried restarting the computer?

  • Where and How can I get the Black Lenovo Login Screen for Windows 7 for X120e?

    Hello,
    I just installed Windows 7 on a SSD on my X120e.  It is a fresh install and I really liked the Black Login Screen that my Lenovo X120e that came on the regular drive.  Is there a way to download this screen and make my login screen back to this screen?  
    Thanks.!

    qubilist wrote:
    I just installed Windows 7 on a SSD on my X120e.  It is a fresh install and I really liked the Black Login Screen that my Lenovo X120e that came on the regular drive.  Is there a way to download this screen and make my login screen back to this screen?
    Create Recovery Discs from your HDD, then load them onto the SSD.
    Hope that helps,
    John
    ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ]

  • How can I see the "Now Playing" music screen in horizontal mode on my iPhone 6 plus?

    The iPhone 6 plus is too tall to stand up on my elliptical trainer but when I rotate it to horizontal mode, the music app's "Now Playing" screen turns into that song icon screen. Is there some way to make it show a horizontal version of the "Now Playing" screen?

    Go to the app store and search using the term YouTube. You should see a number of apps that will give you access to it.

  • How can I send the end result (or screen shot) of a colouring tool I have just created in AS3...

    I've just created this tool for colouring in different panels of a shirt:
    http://www.artwork-king.co.uk/burghley/SHIRT.html
    I want to include a button on here that, when clicked, will email the end result of the coloured shirt to a particular email address.
    Any thoughts?

    That does make perfect sense Ned.  So I guess all I need is a reply of the web colours along with which parts of the shirt are in that colour.
    Any ideas what script to use for that?
    Current script for the colour change is:
    var bttsbp:Array = [bp_black, bp_red, bp_green, bp_blue, bp_yellow, bp_pink, bp_palegreen, bp_paleblue, bp_paleyellow];
    var set_colorsbp:Object = {'bp_black':0x000000, 'bp_red':0xff0000, 'bp_green':0x00ff00, 'bp_blue':0x0000ff, 'bp_yellow':0xf7cd00, 'bp_pink':0xff99a3, 'bp_palegreen':0xa1dd90, 'bp_paleblue':0x64d9e2, 'bp_paleyellow':0xffef7b};
    var obj_colorbp:ColorTransform = new ColorTransform();
    for(var q:int=0; q<bttsbp.length; q++) {
      obj_colorbp.color = set_colorsbp[bttsbp[q].name];
      bttsbp[q].transform.colorTransform = obj_colorbp;
      bttsbp[q].addEventListener(MouseEvent.CLICK, changeColorbp);
    function changeColorbp(evt:Event):void
      var b_namebp = evt.target.name;
      obj_colorbp.color = set_colorsbp[b_namebp];
      BACK_PANEL.transform.colorTransform = obj_colorbp;
    ('bp' being the part of the shirt, in this case 'bp' = 'Back Panel')
    Thanks for the help thus far!

Maybe you are looking for