Smartform in different servers.

Hi gurus,
My requirement is that i need to print a particular text in the smartform .this text should appear in the developement server and quality server but not in the production server.
is there is any condition by which we can restrict the display of the text in different servers.The developement server has system id DE1 and quality ME1 and production PE1.
Is there any way we can use these system ids as these are uni

Hi
U can check the system variable SY-SYSID, here u can find the Server ID:
IF SY-SYSID = 'DE1' OR SY-SYSID = 'ME1'.
ENDIF.
Max

Similar Messages

Logical systems assignment when SRM and ECC are on 2 different servers

Hi SRM guru's,
What is the standard practice for Logical system creation and assignment when ECC and SRM are on 2 different servers.
I could not able to find which i created a logical system in SRM server which i created in ECC
Same for the ECC also.
how do i assign logical system of SRM to ECC
vice versa.
your prompt response is appreciated.
Regards

Hi Sai,
Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
Logical System : <SID>CLNT<Client Number>
For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
You can refer the below document which eplains the creation of logical system and RFC destinations etc
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
Note: Only while configuring the RFC Destination, the servers will play a crucial role.
Regards
Kathirvel

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

Setting mail with Cox (or other services with different servers for pop and smtp)

My Cox mail account uses different servers for pop and smtp (my personal ISP 1&1 does too).
The mail applet on my Blackberry Curve 8330 with Verizon does not allow to define different servers for pop and smtp, and further, for SSL smtp mail, the port is fixed at 995 and cannot be changed, while Cox (and 1&1) want to use 587 or something like that.
As a result, I can only receive mail with these services.
I also have yahoo mail, which works fine, so I can send mail with it and it is not a life-and-death situation, but I would like to be able to just reply to email sent to my Cox address.
I called Verizon and they said BlackBerry provides the mail access through their servers and the applet, so there is nothing they can do.
Is there a way to set it such that I can not only receive but also send mail through either of these services?
Thanks in advance,
Didier
PS: Other than that, the Curve on Verizon rocks!!! so much better down here than AT&T it's not even funny.

OK, thank you for the input.
The problem I have with this solution is like the one I have now using yahoo.
There are 2 problems:
1) mailing lists want the mail to come from the account that is subscribed, so if the cox account is subscribed, I can't contribute from the blackberry, and if the blackberry account is subscribed, I don't get my mail in Outlook. Neither is good for me.
2) people who send me mail to the Cox account and get replies from me from the blackberry continue responding to the account that can send from the blackberry (not Cox), and from that point on I do not have that mail on the computer.
The issue of having two copies is no big deal, I just delete the mail I do not need. I would rather have two than none.
Really, Blackberry should modify the email service so that they directly support mail systems like those of Cox and 1&1. I am sure there are others. They should also allow the use of another port for SSL than 995. I have not seen anyone using 995 for SSL.
Until recently, I had a BB provided by my employer, and we had a BES, and that worked really well. I would like to emulate as much of that functionality as possible without having to pay somebody another $10 or $20 a month just for the priviledge of having an account on a private BES server.
Anyway, thanks for the exchange and suggestions.
Didier

What are the entities that can be re-used in different servers, SI App, SI instance? And how?

Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, Muhammad

First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

Mail: email retrieval from 2 different servers

I retrieve emails to MAIL for my 2 email addresses from 2 different servers (gmail and 'workspace'). I try to keep the email on the servers to a minimum by deleting emails, but I want all the emails to stay in "Mail" on my Macbook pro. When I delete email on the gmail server and then 'check mail' in Mail, if it's not on the gmail server, it gets deleted in Mail. Under 'preferences:accounts:advanced' I've selected 'all messages and their attachments' under 'keep messages for offline viewing'. I thought this would preserve all emails in Mail, but it doesn't. What should I do to make sure all the emails I want to stay in Mail, stay there regardless of whether they are still on the servers or not? Thanks.

try, like this
SQL> select name from v$database;
NAME
DBDEMO
SQL> create user testing identified by passwd;
User created.
SQL> grant connect,resource to testing;
Grant succeeded.
SQL> conn testing/passwd;
Connected.
SQL> create table test_tb (id number);
Table created.
SQL> insert into test_tb values(123);
1 row created.
SQL> /
1 row created.
SQL> commit;
Commit complete.
SQL> select count(*) from test_tb;
COUNT(*)
2
SQL>
on dblink created machine:-
SQL> select name from v$database;
NAME
DB2
SQL> create user nic identified by nic;
User created.
SQL> grant connect,resource, create database link to nic;
Grant succeeded.
SQL> conn nic/nic;
Connected.
SQL> create database link test_db_link connect to testing identified by passwd using '(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.1)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = dbdemo)))
2 ';
Database link created.
SQL> select count(*) from test_tb@test_db_link;
COUNT(*)
2
SQL>

CFLOGIN works, but not simultaneously on different servers/broswers

I'm using CFLOGIN with application.cfc which works great when I test it - I'll call it login session A in browser window 1.
When I simultaneously log into the same app on a different server with a different username (login session B in browser window 2), I can't login - unless I log out out of session A/browser window 1 first. Something in my new code is preventing me from logging into my app more than one time, even when the apps are on separate servers and I'm using different usernames.
We have the same app on various servers (test/development/production), and I used to be able to login on 2-3 browsers or servers at a time - and I never had a problem until recently when I made some changes to the application.cfc and login code.
I updated the code because before the session scopes and login credentials were not being initiated and terminated together (upon login/logout). Before, a user was clicking 'logout' and it was clearing the session scopes without invoking CFLOGOUT. Now, I fixed that, but I have another problem, which is that I can't log into the application on two different browsers or servers at the same time (even if I'm using different login usernames). Any suggestions would be appreciated.
<cfcomponent displayname="Application" output="false">
    <cfset this.name = 'SampleApp'>
    <cfset this.SessionManagement = true>
    <cfset this.SetClientCookies = true>
    <cfset this.SessionTimeout = CreateTimeSpan( 0, 0, 5, 0 ) />
<cffunction name="onSessionStart" access="public" returntype="void" output="false">
    <cfset session.hostname = 'http://'&#CGI.HTTP_HOST#&'/'>
    <cfset session.dbase = 'localdb'>
    <cfset session.roles = ArrayNew(1)>
    <cfreturn>
</cffunction>
<cffunction name="onApplicationStart" access="public" returntype="boolean" output="false">
    <cflog file="SampleApp" type="information" text="Application started." />
    <cfreturn true>
</cffunction>
<cffunction name="onApplicationEnd" returntype="void" output="false" hint="Executes on session timeout or if server shuts down.">
    <cfcookie name="CFID" value="#CFID#" expires="now">
    <cfcookie name="CFTOKEN" value="#CFTOKEN#" expires="now">
    <cfreturn>
</cffunction>
<cffunction name="onRequestStart" access="public" returntype="void" output="true" hint="Executes before each page processes.">
    <cfargument name="targetPage" type="String" required="true"/>
        <cfsilent>
        <cfif GetAuthUser() NEQ ''>
            <cfif NOT isDefined('session.uname')>
                <cfif CGI.HTTP_REFERER DOES NOT CONTAIN "login.cfm">
                    <cfinclude template="expired.cfm">
                    <cfabort>
                </cfif>
            </cfif>
        </cfif>
        <cflogin>
            
            <cfif IsDefined('cflogin')>
                <cfquery name="qValidateLogin" datasource="#session.dbase#" username="#cflogin.name#" password="#cflogin.password#">
                    SELECT    role
                    FROM    session_roles
                </cfquery>
                <cfif qValidateLogin.RecordCount GT 0>
                    <cfloginuser name="#cflogin.name#" password="#cflogin.password#" roles="#qValidateLogin.ROLE#">
                    <cflog text="User - #cflogin.name#" type="Information" file="Filename" date="yes" time="yes">
                <cfelse>
                    <cfinclude template="login.cfm">
                    <cfabort>
                </cfif>
            <cfelse>
                <cfif right(arguments.targetPage,10) is "logout.cfm">
                    <cflocation url="index.cfm">
                    <cfabort>
                <cfelse>
                    <cfinclude template="login.cfm">
                    <cfabort>
                </cfif>
            </cfif>
        </cflogin>
        </cfsilent>
</cffunction>
</cfcomponent>

Oh no, that was my mistake. Thank you for catching that! That query is currently not being used on my Application.cfc page, which is why I wasn't having problems with it, but I'm glad you pointed it out to me. I had that code in my Application.cfc file just incase I wanted to check login from somewhere else, but my login query is actually being called with Flash Remoting using setCredentials() to connect to login.cfc. This is the correct query in my login.cfc file:
            <cfquery name="qValidateLogin" username="#session.uname#" password="#session.pword#" datasource="#session.dbase#">
                select role from session_roles where role like 'xxxxx%'
            </cfquery>
I do think I figured out a solution to my problem though. I found out how to use applicationToken, which I understand if it is not set, by default will be the value of application.Name. If you want users to be able to log into multiple instances of your application at the same time, you would give the applicationToken the same value. This would be great for clustered servers or sites with sub-domains.
If you wanted to force only one login for the three different sites, you could give this a different value. VERY useful. So I have:
<cfcomponent displayname="Application" output="false">
    <cfset this.name = 'SampleApp'>
    <cfset this.SessionManagement = true>
    <cfset this.SetClientCookies = true>
    <cfset this.SessionTimeout = CreateTimeSpan( 0, 0, 5, 0 ) />
    <cfset this.loginStorgage = "session">
    <cfset this.applicationtoken = 'SampleAppSub'>
Now, I can log into this site on my development machine with multiple browsers pointing to the same site hosted on different servers - with no problem. I never had an issue with this before, but something else I recently added into my code in Application.cfc made this not work. I should probably also mention that I work on many different applications that all use the same application.Name even though they are different sites - we do this so the same settings can be deployed on different servers.
With the applicationToken settings, I have it working again. Perhaps what made it break was setting this.loginStorage = "session"? Before this was not set and was using the default value of "cookies" which I didn't want - because my site is used by different people on the same box and we have clustered servers.

HT1146 I can not get my mail to send on my mac. It has been fine until about 2 hours ago, incoming mails are fine. I have jused all of my 3 accounts and I can't send from any og them (they are all on different servers) anyone have nay ideas on how I can f

I can not get my mail to send on my mac. It has been fine until about 2 hours ago, incoming mails are fine. I have jused all of my 3 accounts and I can't send from any og them (they are all on different servers) anyone have nay ideas on how I can fix this?

Jailbreaking violates the Apple warranty and licensing agreement and voids ALL support from Apple. No one on here can help you as doing so is a violation of the Terms of Use of these Communities. If you send the iPad to Apple they will just send it back to you as they are not permitted to work on a machine that has been jailbroken.

Test connectivity to different servers on Solaris 10

friends,
I have a query for a connectivity test with different servers, explained the case for more details: In a windows environment if I have verified connectivity to another remote computer within the network with the command: ping remotehostname
on Solaris 10 as I can perform this test?
Thanks

the command is:
ping remotehostname
Seriously, these kind of questions must be much easier to find answer to by using google or the Solaris documentation, its a quite basic question.
To give a more serious answer "ping" is in /usr/sbin, so if you don't find ping you dont have /usr/sbin in your $PATH. In which case you can run:
/usr/sbin/ping remotehostname
If you get "unknown host remotehostname" you need to fix your DNS resolving by adding "dns" to the line which begins with "hosts" in /etc/nsswitch.conf and create a /etc/resolv.conf..
.7/M.

BPEL and ESB in different Servers

Hi ,
What is the advantage of having BPEL PM and ESB installed in different servers ?

In my knowledge it has it own merits and demerits
IF (BPEL and ESB) installed in dfferent OC4Js (JVMs)
Merits
1) Individual JVM for each component means more memory allocation and support from JVM
2) More number of processes can be deployed.
DeMerits
1) ESB and BPEL communication can happen via SOAP over HTTP only whereas had these been deployed in the same JVM (oc4j) it can do native communication.
Edited by: cdmnagaraj on Apr 22, 2009 5:17 AM

Best way to compare data of 2 tables present on 2 different servers

Hi,
We are doing data migration and I wil like to compare data between 2 tables which are present on 2 different server. I know to find the difference i can go for minus or full outer join and by creating the database link.
But my problem is the volume of the data. The tables under consideration has approximately 40-60 columns and number of rows in each tables are around 60-70 million. Also both the tables are on 2 diffferent servers.
I would like to know
1] What will be the best way to compare the data and print the difference from performance perepective? I know that if I am going for DB links then its will definitely impact the performance as the tables are across 2 different servers.
2] Is it advisable to go for using SQL - PL/SQL for this kind of senario or dump the data in flat files and use C or C++ code to find the difference.
Regards,
Amol

Check this at asktom.oracle.com. Search for "Marco Stefanetti" and follow the few posts between Marco and Tom. As far as your tables being on separate servers, you could consider dumping the data to file and using external table or using CTAS ( create table as select ) to get both tables locally.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2151582681236

ESB and BPEL in different servers

Hi ,
Is there any performance based advantage when we have BPEL and ESB in different servers ?

If you seperate them, it will have impacht on the perfromance. Services are called over the network, assuming BPEL and ESB are on different servers. Otherwise they can call each other via native binding if ESB and BPEL are in the server and container.
Marc
http://orasoa.blogspot.com

Ale / Idoc between two different servers

Hi All,
In my scenario i am working on two different servers in which distribution of idoc is carrying out.
(Before this i have worked on same server scenarios with different clients.)
But present scenario i am working with two diferent servers,
like,
i am having 100 client in server A (sender system) and 700 client in server B(receiver system),
i have created all the basic steps like logical systems in both systems,
Assign logical systems to clients in consecutive servers,
RFC's and ports.
while creating message type under model view in server A client 100(sender system ) i can find only 100 client's logical system name, i cannot find the 700 clients logical system name.
due to both clients are in different ip address , does we need to transfer the logical system assign ment transport request to other client.
regards,
Mohd.

Hello abdul ,
When you configure a logical system for example the same system with a different client (700) it should be configured in the source system (Client 100).
In this way when you can send the relevant IDOCs via the ALE according the model view (BD64) ,the source system (100) knows that the target is the system with the client 700 .
(There is a generic RFC in the background process : INBOUND_IDOC_PROCESS).
Sender : system_100
Receiver:system_700
Message type : MATMAS
Also in order to accept the relevant Idocs in the system with client 700,you must configure a partner profile that will contain in inbound parameters the relevant message type (MATMAS).
I hope it is more understood .
Thank you,
Boaz

Distribution Monitor for 2 different servers from 2 different sites

Hello all,
We are trying to use Distribution Monitor during a parallel Unicode Conversion on a SAP 4.7 system.
The source system and target system are 2 different servers located on 2 different sites (more than 500Kms distant).
Questions:
1. Can we use Distribution Monitor with 1 source server dedicated for the Export and 1 target server dedicated for the import of a package?
2. If it is not possible, what are the constraints in fact?
3. Can we have a scenario where Distribution Monitor is used on the source system in order to use the parallelism benefit and Migration Monitor used on the target system?
Thanks for your help & feedback,
Chris

Hi Chris,
1. Can we use Distribution Monitor with 1 source server dedicated for the Export and 1 target server dedicated for the import of a package? The Answer is No
In order to use Distribution monitor, u need minimum two application servers on source systems and correspondingly atleast minimum two application servers on target system
For example let us say Application server A and Application server B on sources systems and Application Server C and Application server D on target ytem
Then configure Distribution monitor properties to include two application servers as source systems and two application servers as target systems. When u exeute distribution monitor preparation, first it scan database servers in source system nd target system and then scan CI servers in source and target system. Then Packages will be distributed in two application servers A and B
Run Export from Application server A for first fifty packages , at the same time Run import these first fifty packages in Application Server C
Run Export from Application Server B for other remining packages and at the same time , run import the remaining packages into Application Server D.
(that is one to one correspondence)
2. If it is not possible, what are the constraints in fact? - There is no constraints. However there is lots of time consuming during Distribution monitor preparation and checking.
3. Can we have a scenario where Distribution Monitor is used on the source system in order to use the parallelism benefit and Migration Monitor used on the target system? - The Answer is No.
You cannot mix distribution monitor tool for source system and Migration tool used on target system.
You have to use any one tool depending on the size of database used.
if your database size used is very very large then recommend to use distribution monitor where u in sou can have multiple R3load jobs in each application server. Say Application server A use 20 R3load jobs and Application server B use 15 r3load jobs).
Thanks
APR

Accessing data from 2 different servers

I have oracle data on 2 different servers. I want to access the data retrieve it
through a sql query and combine the data retrieved. How do i retrieve the data
on the 2 servers.
thanks

try, like this
SQL> select name from v$database;
NAME
DBDEMO
SQL> create user testing identified by passwd;
User created.
SQL> grant connect,resource to testing;
Grant succeeded.
SQL> conn testing/passwd;
Connected.
SQL> create table test_tb (id number);
Table created.
SQL> insert into test_tb values(123);
1 row created.
SQL> /
1 row created.
SQL> commit;
Commit complete.
SQL> select count(*) from test_tb;
COUNT(*)
2
SQL>
on dblink created machine:-
SQL> select name from v$database;
NAME
DB2
SQL> create user nic identified by nic;
User created.
SQL> grant connect,resource, create database link to nic;
Grant succeeded.
SQL> conn nic/nic;
Connected.
SQL> create database link test_db_link connect to testing identified by passwd using '(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.1)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = dbdemo)))
2 ';
Database link created.
SQL> select count(*) from test_tb@test_db_link;
COUNT(*)
2
SQL>

Smartform in different servers.

Similar Messages

Maybe you are looking for