Smartform label print

Hi !
We have set up labelprinting (Zebra) for GI and GR, and have created a smatforms for this. And it works fine.
A new set of labels is to be set up, and the recuirement is to print the text vertically.
Does anybody know the setup in the smartform for this ?
Regards Gaute Kilen

Is it not just a case of printing landscape instead of portrait? 
Page formats can be set in SPAD - Extended maintenance > Device Types > Page Formats

Similar Messages

  • Smartform label printing- page setting

    Hi,
    I am printing labels on a Zebra printer, I am having two questions here.
    1> While printing, it starts from 8mm away from the left margin(label border). it should be max 2MM.
    The window left margin start from 0.10 CM and also the paragraph used is left aligned. Printer setting is also looks fine to me in SPAD. Is there any way to adjust the left margin and top position etc. Any idea on this?
    2> I am printing barcode new technology. Here I am not able to set the height and width(we can set in old tech). So, in case I am having multiple barcodes on a single label they are coming in diff lenght. Is there a way out to display all of them with the same dimension?
    Thanks,
    Pravas.

    Hi,
    In Smartforms  in form attributes  -> in out put options you eill be uising a style,
    Againg to to tcode smartform - > select radio butrton STYLE. you can create your own formats in them,
    You have options to adjust characters inch, Tab top amd Lines per inch.
    You have options to Set Spacing in INDENTS AND SPACING tab, IN TABS tab you can set the tab position for each Paragraph.
    Thanks,
    Krish.

  • Standard Smartform for label printing for packages - pls advice

    Hi All,
    I need help in changing a print program ie Standard Smartform for label printing for packages ?
    Standard Driver program: SDPACKDR
    Please provide me with the detailed steps for editing the Std Smartform according to any requirement.
    Points will be rewarded promptly.
    Thanks.

    hi,
    1. The smartform name is SD_PACK_ETIK.
    2.Just copy the standard program into Zprogram and make chanes and assign in NACE with the form.
    3.But,in smartform lable printing is not possible.
    4.you can print barcodes.
    Regards,
    Kumar(Reward if helpful).

  • How to make use of label printing in sap smartforms

    Hi Dear,
    How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
    come as four labels.All page should follow the same procedure... How to do...please help me..
    Regards,
    Nikhil

    Hi,
    Please go through below link, would be helpfull for you.
    [http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

  • Problem printing horizontal text in smartform with zebra Z6M label printer

    hello,
    The situation is this:
    There is a Z smartform wich prints a label to a zebra Z6M label printer with the text and barcodes vertically.
    The form have a command in the main windows with the parameter: S_LZPL_SETUP     '^FWR'
    This label works fine, but the client want to change the form, they have told me to create a new smartform and print the info horizontally, using the same printer.
    The tests i have done are the following:
    create a smartform from ground and write a template text and a barcode with a new font of system barcodes. the bardoce is shown ok(it is shown horizontally), the problem is that the template text is shown vertically, as in the original smartform.
    then i tried on another zebra ZM600 label printer, similar model, but not the same, and the smartform printed was ok (text and barcodes shown horizontally). So i think is a configuration setting problem, but i dont know where to search.
    i have checked the label printer parameters in SPAD, but didnt find anything souspicios.
    have you any idea?
    thanks in advance.

    See these if they be of any help.....
    BARCODE:
    goto smartform styles-> create a style-->
    create a character format.
    under standard settings give the bar code name
    use this style in ur smartform. select the data field which u want to barcode print and assign the character format
    Similarly
    SAPSCRIPT
    open the form and click the character format button and
    repeat the step as above....
    http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/frameset.htm
    Go to Character formate in your form.
    create a new char formate with enable BAR code AND
    you can give its type too.
    To Create a Bar code prefix:
    1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Which barcode printer are you using ? Can you download this file and see.
    http://www.servopack.de/Files/HB/ZPLcommands.pdf.
    It will give an idea about barcode commands.
    Check this link:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Hope this link ll be useful..
    http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
    go through these links and cose u r previous threads,
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    smartform - barcode
    http://www.erpgenie.com/abap/smartforms.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
    Detailed information about SAP Barcodes
    A barcode solution consists of the following:
    a barcode printer
    a barcode reader
    a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    Creating Bar code:
    ) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Check this thread for detail information.
    How to print Barcode in te SAP SCRIPTS?

  • Command to move content left/right in Smartform label for zebra printer

    Issue : Command to move print content left/right in Smartform label for zebra printer.
    Requirement : If you changed the printer setting top position and left position, Print should start from a specific (X,Y) position.
    I am facing an issue while printing a smartfroms in different zebra printer.  We had tried all
    S_LZPL_SETUP_X  (Where X is LH/SPD/MD/PM/FT )
    But these command are not working in smartforms.
    We had used ZPL II printer command like u2018LH X,Yu2019  and u2018FT,X,Yu2019  in main window as well as in subsequent windows. But that also not working.
    Please advice.
    dinesh.

    Hi,
    If you follow notes #750002 and #750772 and use a smartforms and device type LZEB2, then the you cn just adjust the position of the text in the smartform. e.g. Use tab-stops, spaces or adjust the position of the window. There is no need to use ZPL2 commands directly.
    Regards,
    Aidan

  • Zebra label printing with Smartforms

    Hi
      I am currently using smartforms to print to Zebra printers. the fields are printing on Portrait format, i am not able to get them to print Landscape. I used the documented Command Node in Smartforms -
    Attribute Name: S_LZPL_SETUP
    Attribute Value: '^FWR'
    this is still not working for me...am i doing something wrong in this Command line?
    Documentation says i can only use Portrait in smartforms because Zebras doesn't understand Landscape...documentation offers the above workaround, but it doesnt seem to work for me...has it work for any of you?

    Hello again,
    currently i have some smartforms printing to zebra printers, and i did it, using BARONE for ZPL generation.
    it's exactly the same thing, you create a main window, and in the text editor toy click "TxtEditor" just above the "Check" buttonm and you pass to the sapscript tradicional editor. In there copy adn paste the ZPL code.
    Define the parameters in the "Form interface" and i'ts done.
    this way you will be able to resolve your problem, it's up to you to use (or not) the barone for Smartforms.
    Regards,

  • BarTender for Zebra Barcode Label printing using Smartform

    HI Experts,
    Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
    I have to include a jpg Logo into the Label using BarTender.
    But when I test using the Zebra printer - the logo/picture won't print out.
    Any idea?
    Thank You.
    Best Regards,
    CW

    Hi There,
    I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software,  they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap.  See if they can help you. :~)
    Good luck.
    Dave.

  • Label Printer SAP

    Hi ,
           I am trying to configure Label Printer in SAP . Our ABAP developer has created a Smartform (which is linked to Custom Page format of size 12 * 21 mm) .
           Now  we are finding it diffcult to configre the label printer in sap
    Printer Name : TOSHIBA TEC B-SX4
            Do SAP have Device type for the above Printer ? Can some body guide me throw the set up of Label Printer.
    Thanks,
    Srini. 

    Hi,
         Printer and SAP has connected successfully . But when i try to trigger my custom smart form  i am getting below error :
    Update was terminated
    Update was terminated
    System ID....   DEV
    Client.......   300
    User.....   SRINIVASANS
    Transaction..   VL02N
    Update key...   F23FECE18A5AF103BD76000C29FF4671
    Generated....   22.08.2012, 10:59:12
    Completed....   22.08.2012, 10:59:20
    Error Info...   SSFCOMPOSER 018: Device type SAPWIN
                   I can say that printer is connected to SAP because we went to SP01 and print it ,it did printed and page format was wrong .
                  But for custom smart form its not working  ? Am i missing something in page format assignment .   
    Thanks,
    Srini.

  • Barcode Label Printing

    Dear Experts,
    is it possible to print barcodes on labels using the SAPSprint service ?
    The labels are defined as Sapscripts and Smartforms.
    Thanks a lot for any help.
    Regards,
    Marc
    Edited by: Marc Reinhardt on Jan 6, 2009 2:53 PM
    One more remark: Is it necessary to use an external BARCODE.DLL for barcode generation or can it be done by the label printer as well ?

    Hello Pranay,
    I did some research on that SAP note "25344 - Interface SAPSprint (SAPFprint) Barcode DLL (details)" states the following:
    u201EAn external barcode DLL is to be added to the SAPSprint or SAPFprint.u201C
    u201EThe SAPSprint or SAPFprint delegates the task of printing barcodes to an external DLL. SAP does not provide a barcode DLL. The DLL must meet certain requirements so that it can be used.u201C
         u201Eu2026u201C
         u201EThe following list is of suppliers known to us that manufacturer compatible barcode DLL:
         1) e-bizco.com GmbH, Up'n Hoff 1, D-22927 Großhansdorf, Germany
         2) TEC-IT Datenverarbeitung GmbH, Wagnerstr. 6, A-4400 Steyr, Austria
         3) MW6 Technologies, Inc.u201C
    This means to me that if we print barcodes with SAPSprint we must have this barcode.dll even if the printer would be able to interpret it.
    Cheers,
    Marc

  • GR Label Print

    Hi,
    This is on GR Label Print at IM Level.
    We have a requirment that for Cost center / Asset the GR Label should not be printed but the Sales Order specific Purchase to be printed after doing MIGO (Movement type 101)
    Is there any way we can control at configuration Level rather than the Smartform Level?
    Tried to use OMJ4 but could note restrict specific to Cost center K or Asset A
    Regards,
    Vengat

    Hi Vengat,
    As i know there is no standard availability for this.Develop a custom for that .Ask you technical team to develop a transaction for  that with required selection criteria.This will be easy to do.Check this and post if need help.
    Regards,
    Madhu.

  • Unable to print number of copies on label printer

    Hi Everyone,
    I am able to print smartform any number of copies on standard printer.
    But when I change from standard printer name to Label printer name and execute the smartform with number of copies ( greater than 1 ).
    For label printer I am able to print only one copy, irrespective of number of copies specified. However I can able to number of copies specified for standard printer.
    Can anyone help me what could be the reason? Is that any settings should be done for label printer ?
    Thanks.
    From
    Reddy

    Paddy,
    Welcome to Apple Discussions.
    The problem might be a corrupt preference. Does this problem occur with all applications? If not, which application?
    Try Repair Disk Permissions using Disk Utility.

  • Questions - Putaway label printing

    Hi all,
    I need to develop a smartform to print the following putway label:
    i--|||--
    |
    i--|||--
    |
    BAR CODE
    material NO
    material desc
    bin location
    quantity
    date/time
    Now for the bar code,the specification are as follows:
    Code128A Font min size 28
    For this BAR CODE,do i need to use the std system  bar code C128A or C128A_00??
    Also do I need to create a template in my smartform for the above format of the label or a table would be appropriate?
    Also the bar code is a combination of 2 fields i.e. Item No and TO no.So in the text node for the bar code i will write the comcatenated value of these 2 fields and  include the bar code smart style  ...But how will this ensure that BAR CODE isprinted in form of thin lines? Is the BAR code prnted in form of line due to printer setting or I have to write something exclusively in smartform?
    Also,do i need to use zebra printer for label printing or normal Laser printer will suffice?
    Please advice.
    Thanks.

    Dear Ram,
    Through laser printer it is not possible....
    If you are having ZEBRA Printer you can design the label in the ZEBRA DESIGNER that has been provided by ZEBRA.
    After designing the form you save it as a text file by selecting the File Menu-> Print option.
    Then you select the text file coding and paste it into SMARTFORMS and assign the variable for the respective fields...
    Then use this function module in your driver program and execute it.
    In the same way,
    If you are using the PRINTRONIX Printer you will have to design the label by using the NIice Label software.
    And the rest of the procedure is same...
    Hope this will help you to move further...

  • Smartform lable printing

    Hi Gurus,
    I know that lables can't be printed using smartforms.
    So how do we mange if there is any requirement priniting lables with smartforms?
    Regards

    Hi,
    Do you want to print Barcode label printing in smartforms?
    You can do it by creatting character format in smartstyles. & Create a text in smartfrom & asign the character format to that particular field.
    Ashvender

  • Label Printing Using Address Book - How can I Print multiple labels of the same name?

    Label Printing Using Address Book - How can I Print multiple labels of the same name?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

Maybe you are looking for