SmartForm language EN is not active and has no errors
Hi All,
I am getting an error "Form 'My Form Name' language EN is not active and has no errors ". This a smart form that's currently working fine with an existing company code but when assign this form (form was not changed at all) to another company code and run the dunning statement, it give us the above error. The funny thing is that it is active but still gives us the error.
Does anyone have any idea why this is and what to do to resolve this.
Regards.
Hi,
Go into ur form in SMARTFORMS t-code............
In form attributes u have 3 radio buttons right
select translate into all languages option and activate it...........
Don't check the 2 check boxes right to dat.....
Cheers,
jose.
Similar Messages
-
Form Z_FIDUN_A language EN is not active and has no errors
Hi Everyone,
I have copied one Smartform from 4.6C to ECC 6.0. and i have activated that Smartform in ECC 6.0. when i tried to print it is giving me the error "Form Z_FIDUN_A language EN is not active and has no errors". I have activated it in EN only.
Please help me.Hi Leela,
Try running the FM generated for the SmartForm and resolve any errors that might occur.
Or Else
the issue must be the customising where the Business Events are trying to call SAP Scripts and not Smartforms.
Let me know If you require more help on this.
Edited by: Raj on Oct 29, 2010 1:37 PM -
Form Program Name language EN is not active and has no errors
Dear all,
I'm new to SAP development. I have copied the standard RLVSDR40 and made some modification on it. When i tried to print in lt31. I encounter the following error:
"Form <program name> language EN is not active and has no errors".
Any idea about this?? What is the standard procedure of this kind development??
Regards,
Kithi
first go to SE71 and give Form Name and Original Language of the form and copy it to zform.
Now open this Zform in change mode and go to Utilities-> change original language to log on language here EN in your case-> and save it.
Now your Zform is in language EN note tat now when you are opening your zform to modufy you might be trying to change it in DE so change language to EN and then modify it.
After making changes go to NACE transaction to assign this zform to transaction you are using.
Nace->choose application->output type->choose your output type->Double click processing routines->you will find one column pdf smartform/scriptname-> here give your zform name
It will surely work if not get back to me -
Form ZF_J_1IEWT_CERT language EN is not active and has no errors
Hi,
i got the following Error while Posting of With Holding Tax Certificates for a vendor through T-Code J1INCERT.
Form ZF_J_1IEWT_CERT language EN is not active and has no errors
Please help.....
Thanks
RashmiHi Rashmi,
In EWT there is a standard form for withholding tax certificate is J_1IEWT_CERT and your organization has created a new from name ZF_J_1IEWT_CERT . Just ask your ABAPer if this form has been activated and maintained properly.
Contact your ABAPer will solve the issue.
Regards,
Chintan Joshi. -
Form zform4 language EN is not active and has no errors
after executing a program calling script , it gives the following error after clicking print preview : Form zform4 language EN is not active and has no errors .
pl find solution.Moderator message - Welcome to SCN.
Have you tried activating the form (in SE71)?
Rob -
Smartforms: u201C Form zFORM language EN is not active and has no erroru201D.
Dear friends
I am trying to see print preview via tcode LT31 for picking list but getting error u201C Form <zFORM >language EN is not active and has no erroru201D.
Any idea for this?
Regards
PawanHI Abhijit,
Thanks again for your reply, it is true, my form is in active status and showing above message actually I checked the form via menu option then reactivated a few times still I am getting the same error message, this form was working properly till yesterday but when I removed some unwanted text form Table-LINE, and also I removed some comment in code part in initialization. From then I am getting this message while generating print preview ......my guess there will some error in forms which system is not able display via menu option Form -> Check.
Is there other option to check smartforms? I will recheck the form again where I made last changes.
Regards
Pawan -
''Form zrk_test language EN is not active and no error''
hi all
i am getting following error ''Form zrk_test language EN is not active and no errors'' ...........while executing a program.....
plz help..
RohitYou will need to active your SAPscript. Transaction SE71, enter ZRK_TEST, click Change. Then choose Form -> Activate.
Regards,
Nick -
R9 280X Display driver not responding and has recovered error
Hi,
My new R9 280X OC Edition causes "Display driver is not responding and has recovered..." error. After this error, my game would hang. It also caused internet browser to crash.
It has been very frustrating, after 10 minutes of game play, the game would just crash. I have tried many way to try to solve the problem without success
I have.
1) Over clock/ lower the graphic card clock
2) install/reinstall latest ATI release/beta driver, reverted to driver that come with installation disk
3) update my motherboard bios
4) reinstalled windows 7
My PC Spec is
Windows 7 32 bit
4G RAM
Intel Core i5-2500K @ 3.3 GHZ
Any help would be appreciated. Thanks.Use >>this<<
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (302.rar) and put the included file (TV277MH.302) on that stick.
Rename TV277MH.302 to 302.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 302.rom [ENTER] and let it flash the vbios. -
EN is not activated for smartform and has no errors
Hi Everyone,
I was looking at couple of threads on topic "smartform name" EN is not activated and has no errors, but I couldn't get a proper answer. So posting my query here.
I had a created a smartform for dunning process for languages F (French) and N (Dutch). While creating, in language attributes, under translation I had chosen the radio button Into selected languages and specified the languages and at the window level also I had maintained the condition on the language key (eg: wa_tab-spras) and activated without any errors.
After the configuration when we are checking it for a FR customer or NL customer, we are getting error saying "For smartform EN is not activated and has no errors".
Please suggest me how can I fix this error. Hoping for a solution...
Thanks & Regards,
Kumudwini.Hi Sanjeev,
Yes, it is generating the function module and I changed the general attributes into all languages.Will check and get back to you..
Regards,
Kumudwini. -
Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
ThanksWhile we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion
-
I bought an Iphone 4 for my daughters birthday from the Apple shop, I am trying to use a Giff Gaff sim card which has been activated and has credit on it but the phone keeps giving me the message "please use a compatable sim"
Read here:
http://support.apple.com/kb/HT5014 -
when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.
Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
Language EN is not active !
Hi all
Iam new to scripts .
i developed a sample form script.
when am printing my Script with my utilities -print testing its working properly(in se71)
but my problem is when i execute the program in SE38
its getting me an error saying
STOP:
form <zformprog> and has no errors.
Pls can anyone help me out!!
Thanks in advance.hi nageshwar...
i am pasting the code here....pls do bear if i have written my code so silly....i was not covered with scripts in my syllabus and learning this out of my own interest....
thank u so much
regards
Rachel
ata: begin of it occurs 0,
carrid like spfli-carrid,
connid like spfli-connid,
cityfrom like spfli-cityfrom,
cityto like spfli-cityto,
END OF it.
select * from spfli into CORRESPONDING FIELDS OF TABLE it.
call function 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'LOCL'
DIALOG = 'x'
FORM = 'zsform '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
SPONUMIV =
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at it.
call function 'WRITE_FORM'
EXPORTING
ELEMENT = 'ABCD '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif. -
My Apple TV does not work and has never worked.
My Apple TV does not work and has never worked. I replaced it twice and replaced my router and DSL modem but no luck. I spent hours on tech support with both apple and my ISPs with no luck. Any ideas? Is the Apple TV a donation to apple? I have had the device for 8 months but it will not work for longer than 15 minutes before it drops with network errors. All of my other devices work perfectly on the network including 2 iPads, laptops and an old wii. I love apple products and this is the first real disappointment I have had. The Apple TV seems like a major dud of a product.
Seems unlikely you have had two faulty replacements, and more likely that there may be some network compatibility issue or problem with reception in the location the AppleTV lies - anything close to it that might be interfering?
I am assuming you are connected via wifi - if you can try an ethernet connection to rule wifi issues out.
Could you try it at somone else's house maybe? If it worked there it would point to something specific at your location.
You could try replacing it again I guess or seeing if they can offer you credit or a refund. -
Hi,
I have this printer HP Laser M1522nf.It was working fine till today.Suddenly it has started giveng this error
"HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned"
This error is not on printer but on my computer when I connect the printer USB cable.I have 3 laptops all have winxp installed on them.I have tried connecting the printer with all laptops and they all give the same error with reference to connecting usb printer cable and Malfunctioning.
Appreciate your gracious advice and guidance in this regard,
Many thanksIs this at an office and you are logged in not as an administrator?
If that's not the case, then the message maybe true, that it did malfunction, and need to be serviced. (assuming you already tried power cycle the printer, making sure doors/trays are all properly put in.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***
Maybe you are looking for
-
Self-explanatory. I am positive that the GIF I am viewing is faster than what it's supposed to be. I viewed the same animated GIF in another browser and it plays fine. It just plays slower in Firefox 11. I downgraded to Firefox 10 and the animated GI
-
I have a Radeon HD 6950 card and i'm using the opensource driver since i cannot for the life of me figure out how to use catalyst with 2 monitors... is there a way to use opencl with this driver?
-
Viewobject / preparedstatement
JDeveloper 11.1.1.20. Is it possible, from within java-code in an Oracle ADF application, to retrieve data from a database table using a viewobject without interfering with the application? Altering the viewobjects where-clause and executing the view
-
Not enough space while moving iTunes
I have a mid 2012 MacbookPro 13". I recently had to format the Hard disk and reinstall OS X. I took a back up by making a copy of my iTunes folder on an external hd. I have 250GB of space on my HD and the iTunes folder is about 100GB. But when I copy
-
Can I (should I?) delete my iPhoto libraries?
I've converted all my iPhoto libraries to Photos, but the fact that the Photos documentation talks about there being only one physical copy of the photos worries me. If I delete my iPhoto libraries, are my photos gone? If so, how do I move my photos