SmartForm Last Page to be printed in Duplex mode

I have a requirement in PO printout where the Last page containing the Terms and Condition to be printed on Duplex mode.
Suppose the PO is taking 4 pages without Terms and condition. then the TC must be printed on the backside of the 4th page.
My smartform contains 3 Pages  'First', 'Next' and 'TC'.
If i set page 'Next' duplex then the 3rd page is getting printed on the back side of the 2nd page.
So how can i Print the TC page on the backside of the Last Page.
Thanks & Regards
Sukriti.

Hi All,
   I know this is a very old post. Currently I am also facing same issue. Does anybody has solution for it. ?
Regards,
Leona

Similar Messages

  • Chromebook won't print last page (Google Cloud Print)

    I have an MF6160dw. When I print from my Chromebook, the printer will print everything but the last page. The printer shows an error.

    Hi mlourie. I will be able to assist you. The #822 error usually indicates an issue with the format of an image file. So that I can best assist you, I would like to ask a few questions: 1. Are you printing using the Google Cloud Print function or from the Google Remote Desktop? 2. Is it just one document that you are experiencing the issue with? 3. If it is one document, which format is the document saved in, and is the last page saved in a different format? I look forward to your reply. Should you need immediate assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

  • Need Help...HP x476dw Printer and Duplex Mode

    My printer won't stop printing in duplex mode.  I have disabled all duplex settings and it's still printing double sided.  Don't know where else to look????

    From all of your apps or from one of them?  Where have you disabled the settings?  There are setting for page layour in apps (usually set to one page) and page settings on the HP (sest to duplex by default if my memory serves me on setup).

  • Configurations done at SAP gui level to print in duplex mode

    Hi Gurus,
    We had a requirement to convert a printer to duplex mode, we changed all the settings at SAP level( kept duplex mode in printing mode and changed device type to SWAN (as post and pre2 device types are not available) ). But still we are not able to get the desired duplex mode.
    Is there are any further settings or something done in server?
    Is there any settings done at SAP gui to get the print as duplex from a report?
    Thanks in advance....
    Gopal.vvs

    Hi,
    Check the below links
    duplex printing configuration in SAP
    http://www.sap-basis-abap.com/sapab035.htm
    Hope it helps you.
    Rgds,
    Suman

  • Print in duplex mode

    Hi experts,
    I need to print on duplex mode ABAP list documents. My printer works with  HPLJ4 PCL5 driver  (ricoh Aficio 3045) on SAP but when i try to print on duplex mode (the printer properties are set to print on duplex by default) i can't get it.
    I don't use Smart forms. On SPAD i have created a new device, the acces metod is F: Printing on front end computer,  the device type copy of original HPLJ4 to test it, but i only can get paper printed simplex.
    Please, Can you help me?
    Thanks in advance

    Hi,
    The duplex settings in SPAD only work for device types that have the special list driver, Try using device type HPLJ4000 instead of HPLJ4 and create a new spool.
    Regards,
    Aidan

  • Last page doesn't print correctly on 2 page 2 copy Windows 8.1 Wireless printing to HP4630

    On Windows 8.1, when printing 2 copies of a 2 page document (any application) the last page of the last copy fails to print completely (sometimes half a page) or fails to print at all.  It doesn't matter whether I am printing one sided ot two sided.
    A blue alert box is displayed on the desktop with the message "Error printing on HP Officejet 4630 series... The printer couldn't print <file name>"
    When I monitor the printing ("See what's printing"), the job disappears in the monitor just before the error message shows up. There is no indication in the monitor of any printing problem.
    I've looked everywhere and can find no event logs that show this error. 
    Windows is totally up to date.  The latest HP drivers are installed. 
    All attempts to use the various troubleshooting buttons in windows and the driver discover no problems.
    When I print the same exact report in the same way from Windows 7 it doesn't fail.
    I've tried it on 2 different 4630s on the same Windows 8.1computer with the same results. 
    Even though this appears to be a unique problem when printing from Windows 8.1, I need to get help finding out the exact nature of the problem and the error message.

    Hi there @FrankCF , and welcome to the HP Forums!
    I see you're running into print issues.  I would like to help.
    Does this issue occur when making a copy from the machine?
    I would suggest performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then recommend downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Canon ip4300 - Printing Properties, Duplex Mode

    Hi! Where can I activate the Duplex Mode? At Tiger it was no Problem, by using the standard driver. When I clicked on print button in menue (or APPLE + p), there were several options, for example the duplex mode. At Leopard there are no options, there ist just a print button. I use the newest driver from the Canon webpage. What can I do? Does anybody know the problem?

    Have you used the blue disclosure triangle next to the printer's name to expand the Print dialog?

  • Smartforms last page

    Hi All!
    I had designed a Smartform with three pages and the desc is as follows:
    1st page : main window
    2nd page : main window
    3rd page : static window
    The 3rd page will appear at the last.Now my problem is that i am getting the first two pages without the 3rd one.I defined the 3rd as static page without main.Since it doesn't carry any dynamic data from the earlier pages
    Thanks in advance
    Points will be awarded
    Kumar

    Praneeth,
    Can you try this?
    Copy the MAIN window to the THIRD page anyways and keep the height of the window. Have the static Window after that. As the data would have got over in Page 1 and 2, it should start printing the static window.
    Sounds like something similar to printing a footer after the MAIN window.
    Regards
    Ravi
    Note : Please reward the posts that help you.

  • Smartform All pages in one print preview problem

    Hi
         I am displaying the employee data in ALV with checkbox selection.. i put two user defined buttons like print and print preview. when user clicks on print button, smartform will call for very employee in loop and print it employee wise. But my problem is when user clicks on print preview by selecting multiple checkboxes , I need all pages(employee wise like page1,2,3..) in one print preview. I done but for every employee,i have to press the BACK button. But I need all pages in one preview. I'm pasting my code here. Can anyone suggest??
    WHEN 'PREVIEW'.
    w_cparam-no_dialog = 'X'.
      w_cparam-preview = 'X'.
       w_cparam-getotf = ' '.
       w_outoptions-tddest = 'LOCL'.
       w_outoptions-tdnoprev  = ' '.
        w_outoptions-tdimmed  = 'X'.
    * to reflect the data changed into internal table
          IF ref_grid IS INITIAL.
            CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
              IMPORTING
                e_grid = ref_grid.
          ENDIF.
          IF NOT ref_grid IS INITIAL.
            CALL METHOD ref_grid->check_changed_data.
          ENDIF.
    loop at i_data into wa_data where SEL = 'X'.
    MOVE-CORRESPONDING WA_DATA TO WA_PRINT.
      APPEND WA_PRINT TO I_PRINT.
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            FORMNAME                 = 'ZHRF1_PTAR1001'
    *       VARIANT                  = ' '
    *       DIRECT_CALL              = ' '
         IMPORTING
           FM_NAME                  = FM_NAME
    *     EXCEPTIONS
    *       NO_FORM                  = 1
    *       NO_FUNCTION_MODULE       = 2
    *       OTHERS                   = 3
        IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      CALL FUNCTION FM_NAME
        EXPORTING
    *     ARCHIVE_INDEX              =
    *     ARCHIVE_INDEX_TAB          =
    *     ARCHIVE_PARAMETERS         =
         CONTROL_PARAMETERS         = W_CPARAM
    *     MAIL_APPL_OBJ              =
    *     MAIL_RECIPIENT             =
    *     MAIL_SENDER                =
         OUTPUT_OPTIONS             = W_OUTOPTIONS
         USER_SETTINGS              = 'X'
          FR_DATE                    = PN-BEGDA
          TO_DATE                    = PN-ENDDA
       IMPORTING
    *     DOCUMENT_OUTPUT_INFO       =
        JOB_OUTPUT_INFO            = T_OTF_FROM_FM
    *     JOB_OUTPUT_OPTIONS         =
        TABLES
          ITAB                       = I_PRINT
    *   EXCEPTIONS
    *     FORMATTING_ERROR           = 1
    *     INTERNAL_ERROR             = 2
    *     SEND_ERROR                 = 3
    *     USER_CANCELED              = 4
    *     OTHERS                     = 5
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    CLEAR: WA_DATA,WA_PRINT.
    CLEAR: I_PRINT.
      ENDLOOP.

    Hi friend sure.
    You need to increment the index only at the loop no where else and the variable for holding the index value is global.
    If you create before the read every time it gets trigerred.
    After each loop you assign the sy-tabix value to that variable.
    Just like this ,
    v_index = sy-tabix.
    Then at the window just read the table as shown
    READ TABLE t_chq INTO x_chq INDEX v_index.
    This will do friend.
    I will update the flow of my code here, then you many understand it much clear.
    Page1
      Main window (below page1)
        Loop (inside Main win)
          program lines. code : v_index = sy-tabix. v_lines =  lines( t_chq ). (inside loop)
          Condition (inside loop)
             True
                check the v_index < v_lines if true break page, for page break create a command and do it (Inside true condition)
             false
               blank.
      Secondary window (below page1)
        program line (inside sec wind)
        Inside program lines the code is READ TABLE t_chq INTO x_chq INDEX v_index. (inside sec wind)
      Secondary window2  (below page1)
         program line (inside sec wind2)
        Inside program lines some other code. (inside sec wind2)
    This is my logic try like this friend.
    I think for other records its coming fine because since it is an local variable its getting updated some where and also showing 1 bec its always initializing.
    Try this you will get if any issues please revert back to me
    Thanks,
    Sri Hari
    Edited by: srihari.kumar on Jan 6, 2012 11:04 AM
    Edited by: srihari.kumar on Jan 6, 2012 11:05 AM

  • How can i modify my report to print in duplex mode ?

    Hello, I have a report to print orders (i use vb6 and CR XI-R2 at runtime with CrystalActiveXReportViewer object) but now i must print the payment conditions on the back of each order. What is the way to modify my report to do that.
    (Is there somewhere examples of duplex printing report?).
    Thanks in advance.

    Hi Ludek,
    I have imported the reg key but i have the same problem: you must install SP2 or SP4 before.
    Here is my reg key :
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{94FB0978-D094-40C7-91D7-834D39220D4A}]
    "AuthorizedCDFPrefix"=""
    "Comments"=""
    "Contact"=""
    "DisplayVersion"="11.5.8.82627"
    "HelpLink"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,\
      70,00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,\
      00,6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,\
      00,00
    "HelpTelephone"=""
    "InstallDate"="20080416"
    "InstallLocation"=""
    "InstallSource"="C:
    CRXIR2SP2Full
    win32
    "ModifyPath"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,78,\
      00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,00,\
      38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,39,\
      00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,00,\
      30,00,44,00,34,00,41,00,7d,00,00,00
    "Publisher"="Business Objects"
    "Readme"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,70,\
      00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,00,\
      6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,00,\
      00
    "Size"=""
    "EstimatedSize"=dword:001bcc81
    "UninstallString"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,\
      78,00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,\
      00,38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,\
      39,00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,\
      00,30,00,44,00,34,00,41,00,7d,00,00,00
    "URLInfoAbout"=""
    "URLUpdateInfo"=""
    "VersionMajor"=dword:0000000b
    "VersionMinor"=dword:00000005
    "WindowsInstaller"=dword:00000001
    "Version"=dword:0b050008
    "Language"=dword:00000000
    "DisplayName"="Crystal Reports XI Release 2"
    Hope this helps you.
    Just a precision : the message 'can't load data' not occures on all PC with runtime, At work i have installed runtime on 3 PC's (XP) and it works, problem occures when i 'm connecting to my customer's server (windows 2003 server SP2) via tse.

  • To print LAST page in smatform

    Hi All,
               The requirement is to change the existing smartform.
    The smartform already contains FIRST PAGE and NEXT PAGE.
    Now the requirement is to add a NEW PAGE that should be printed at last.
    ie the FIRST and LAST page should be printed compulsarily while the NEXT page is optional.
    My doubt is in attributes in the NEXT page option if we give NEXT(both in FIRST and NEXT page) then how will the LAST page will be printed.
    Or should the new layout for LAST page should be incorporated in NEXT page only.

    Hi Sridhar,
    Use a command for that.
    You have 3 pages
    First Page
    Next Page
    Last Page
    Now at the end of first page use a "Command" with condition for the next page to trigger.
    If condition will satisfy then the contents of next Page will trigger else last Page triggers directly.
    Reply back if u will face any problem.
    If ur problem get solved then please close this thread.
    Regards,
    Ankur

  • Summary field printing on the first line when it supposed to prin last page

    i have created manual report. in the end of the report i have summay columns. wheni run in oracle reports it perfectly shows the grand totle. when i generate to file (PDF) thegrand total print on the first line. can some one tell me wht is it printig on the first line when it supposed to print on the last page. i tried print object on Last Page. it is still same.

    You may have hit this side effect of page protect (all copied from the Help):
    Description The Page Protect property indicates whether to try to keep the entire object and its contents on the same logical page. Setting Page Protect to Yes means that if the contents of the object cannot fit on the current logical page, the object and all of its contents will be moved to the next logical page.
    Note: Using Page Protect may cause objects below the page protected object(s) to appear above the page protected object(s).
    Solution:
    If Page Protect causes an object to be moved to the next logical page when formatting, an object alongside the page protected object may or may not be moved as well. If the object alongside the page protected object is not anchored (implicitly or explicitly) to the page protected object, and that object can fit in the space where the page protected object could not fit, the object will print on that logical page. Otherwise, the object will be moved along with the page protected object to the next logical page.
    (To say it simply: anchor the summary field explicitly).

  • How to print based on the logic that it is the last page of the report

    HI
    I want to print something on the last page.For example,I have to print a image(signature) file on the last page.How can I have the logic that it is the last page or any counter or variable to find that it is the last page of the report??
    Thanks in advance.

    Is there an example of this posted somewhere that actually works?
    I have used this exact syntax in everyway, every location possible and it either locks my MSWORD window on preview or throws a Java error.
    I am using the most current BIP template builder v10.1.3.2.1
    Thanks,
    Scott
    Sample files below:
    <?start:body?><?for-each:G_TEST?>
    <?TEST1?> <?TEST2?>
    <?TEST3?>
    THIS SHOULD PRINT ON ALL PAGES
    <?start@last-page:body?> PRINT ONLY ON THE LAST PAGE<?end body?>
    <?end for-each?><?end body?>
    <?xml version="1.0" encoding="WINDOWS-1252"?>
    <TEST>
    <LIST_G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    </LIST_G_TEST>
    </TEST>

  • HP ENVY 4500 fails to print lower half of last page of series

    When printing a document over several pages my ENVY 4500 fails to print the lower half of the last page to be printed. Because pages are printed in reverse numerical order, this is in fact page 1 of the document.

    Try installing the Microsoft patch for the WSD service.  http://support.microsoft.com/kb/3000461
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • PDF prints last page corrupt

    I have this issue sometimes, not everytime and not on every PDF but the last page on small PDF files or the last few pages on larger PDF files just come out corrput.
    If I re-print these last pages they then print fine.
    I have found a workaround where I send the document to print as an image and this seems to work fine but I would like to get to the bottom of whats going on with this pringin the last page corrupt.
    Someone else must have had this issue.
    Cheers Daniel.

    Dear user,
    Thanks for reporting this issue. Kindly let us know the following details.
    1) Are you using Acrobat or Reader?
    2) What is the version of Acrobat or Reader you are using? The latest version is 10.1.1 and I would request you to keep the application up-to-date. You may do so by going to Help-->Check for updates. Kindly report back if the issue is fixed or not after the update.
    3) Please also let us know the make of the printer and the driver as well.
    4) Since, this issue looks file specific, I would request you to send the pdf across to us.
    If you still get the issue with the latest release then I would request you to please forwad the pdf file across to us at [email protected]
    Thanks
    Atul Agarwal,
    Adobe Sytems

Maybe you are looking for