Smartform Message (Error)
Hi,
I am trying to do print preview for purchase order using ME22N.
I am getting a very wierd message:
"Sytem message 042 from work area SSFCOMPOSER does not exist"
Can someone help me sort this out ?
Thanks.
Regards,
Tushar.
Hi Tushar,
Is this issue solved? If so could you share the solution? Here we are also facing the same error when trying to print PO using transaction ME23N.
Sytem message 042 from work area SSFCOMPOSER does not exist
Thanks and Regards,
Bharat Kumar Reddy.V
Similar Messages
-
Smartform Printing : Error in spool C call: Error from TemSe
Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device ZEB10
Format ZTT Format
Doc. Category SMART
Recipient
Department
Deleted On 19.01.2011
Authorization
Output Attributes
No. of Copies 1
Priority 5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested 0
Processed 0 With Problem 0
With Error (Not Printed) 0
Storage Mode Print
TemSe Attributes
Object name SPOOL0000013836
Data type ????????????
Character set 0 -
> Character set of dev type = 1162
Number of parts 0
Record format
Size in bytes 0
Storage location
On seeing SP01
Spool no. Type Date Time Status Pages Title
13836 Smartforms(OTF) 11.01.2011 07:32 + 0 SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
ManasHi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K -
iam able to see the print preview of the form but when i print iam getting error called 'error in generating the smartform'
iam new to smartfroms can anyone please help me
here is the print program which was already exisisting
DATA g_fmname TYPE rs38l_fnam.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_vbeln TYPE vbrk-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZSD_SMRTSALEINVOICE1'
IMPORTING
fm_name = g_fmname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE 'Error in opening the smartform'
TYPE 'I'.
LEAVE LIST-PROCESSING.
ENDIF.
CALL FUNCTION g_fmname
EXPORTING
s_vbeln = p_vbeln
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE 'Error in generating the smartform'
TYPE 'I'.
LEAVE LIST-PROCESSING.
ENDIF.Hi,
Hi,
i m not getting that sy-subrc = 0 or <> 0.
if u getting right print preview means it should print.
Remove the
IF sy-subrc 0.
MESSAGE 'Error in generating the smartform'
TYPE 'I'.
LEAVE LIST-PROCESSING.
ENDIF.
Statements and execute u will find the difference.
if u r maintaining sy-subrc <> 0.
there is problem in smart form function module calling.. or smart form maintainance plz check that. or u may not activate the smart form correctly.
hope it will work.
with Regards,
Kiran.G -
Smartform System Error for VF03 output type
Hi Friends,
Error encountered in Smartform:
Message no. SSFCOMPOSER181
Diagnosis
You tried to switch to the next table column, but no other column exists. The current column is 10. The line type %LTYPE1 contains only 10 columns.
System Response
The system issues an error message.
Procedure
Check whether the current line type is the desired line type and whether you defined a switch to a new table line.
%LTYPE1 contains only one cell consisting Material Description & Code .Apart from that nothin is there in line.
Please help.
Regards,
Abhishek.Hi,
check what is going else for JEX billingtype documents.
if that does not work out you can try to locate where it is going wrong.
how you do that: Disable a part of your form with conditions.
then if you have done it so far you didn't get that error meesage. Then shrink the part you have disabled until it goed worng again. Then it is going wrong in the last part you have enabled. It is a lot of work but debugging in smartform is not as easy as in sapscript.
success., Gr., Frank -
Unable to Log-in *SAP System Message : Error while reading a Dynpro*
Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -
Installing Adobe Photoshop 10. Using Windows 7 and IIE. Get message "error:1"
Installing Adobe Photoshop 10. Using Windows 7 and IE. Gt message "error:1"
Not sure what CS3 is. Attached is a screen shot of the error message I get when trying to use Photoshot Elements 10.
Looks like I can't attach a Word or PDF document or paste an immage.
This forum may not be very user friendly.
Let mehttp:// know if there is another way to communicate.
Thanks,
Phil
<Removed by Moderator> -
Backup message error -SAP system is running or SAP user is connected to dat
Hello ..
when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
BR0262I Enter database user name[/password]:
BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
BR0054I BRBACKUP terminated with errors
[Major] From: "OMNISAP" Time: 08/08/10 05:31:49
BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
i am new on this, what should i review into the db?
Regards and thanks in advance
Dma.Hello Daniela,
you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
This is also described in the official documentation:
http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
Regards
Stefan -
Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,HP Print Drivers
-
I'm trying to purchase and download a movie, but I keep getting message error that I have no space. The error states that I must delete some photos or videos in order to download. I've gone to iPod then edit and deleted some videos, but I'm still getting the message. What is the correct way to delete the videos and should they still be there.
They wont still be there if you delete them,but if you have those same photos on the main computer.
-
Cannot open itunes receive message Error 7 (Windows 127)
I attempt to open itunes but receive the message Error 7 (Windows 127)
I am running Windows 7 Home Premium.
Have been running Itunes for several years using various iphones, at present on 4S and an Ipad 4.
I have several times uninstalled Itunes, and at the suggestion of support all programmes associated with Itunes, but when I have reinstalled and attempt to start the programme I get the same response.Hello veijoverde,
Thanks for the question. After reviewing your post, it sounds like you are having launch issues with iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Need suggestion on implementing JMS message error recovery
Hi,
Our application has a JMS topic where we publish application events. Now, there can be scenarios where the consumers cannot process the message due to some infrastructure issues and would error out. We need a way so that those messages can be reprocessed again later. we are thinking of the following design for JMS message error recovery
1. Use a persistent TOPIC (this would ensure guaranteed delivery)
2. Configure a error destination on JMS topic e.g a jms queue
3. Have an error handling MDB listening to the Error destination. An error handling MDB would dequeue the errored messages from error destination and persist it to a Data base "error" table..
4. Provide a mechanism to republish those messages to topic (e.g a scheduler or admin ui or a command line utility) .. The messages would deleted from database "error" table and published to topic again....
A. Are there any issues with the above design which we need to handle?
B. Are there any additional steps required in a Cluster environment with a distributed topic and distribute error destination? (our error mdb will have one-copy-per-application setting)
B. From a performance angle, Is it OK to use persistent TOPIC ? Or will it better to persist the message to the db table and then publish it as a non persistent message ... ? (But i guess the performance should be more or less the same in both of these approaches)
C. Are there any other recommended design patterns for error recovery of JMS messages
Please advise.
Regards,
ArifThanks Tom !
We may not be able to go with the approach of delaying/pausing redelivery of the messsage because
1. Pausing entire MDB approach: Our MDB application consumes messages generated by different producers and our MDB needs to continue processing the messages even if messages corresponding to one producer is erroring out
2. Redelivery delay : This would only delay the retry of an errored message. But there would still be a problem if the message fails during all retries (i.e redelivery limit count). We don't want to lose this message. In our case, It is possible that a particular message cannot be processed due to unavailability of a third party system for hours or may be a day.
Basically, i am looking on approaches for a robust and performant error recovery/retry framework for our application (refer details in my first post on this thread) while fully making use of all features provided by middleware (WLS). Please advise.
Regards,
Arif -
Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei SolovievHi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
> -
I cannot open Mozilla Firefox. Instead, a XULRunner dialog box appears with the message: Error: Platform version "6.0.2" is not compatible with minVersion >=6.0.1 maxVersion<=6.0.1 edit
Can you please tell me how to solve this problem? I have been running Mozilla Firefox on my Dell laptop with Windows 7 os.
ThanksIf you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
We downloaded firefox 5.0.1 last night, began working with it. It did fine. After about an hour, I turned off my computer. When I turned on my computer, I click on Mozilla Firefox and it won't start. I get this error message, " Error: Platform version '5.0' is not compatible with minVersion >=5.0.1 maxVersion <=5.0.1" from XUL Runner. What do I need to do to fix it?
The updater wasn't able to update all the files and some were left as older versions.<br />
Do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message. It is more convenient for me to play videos in Quicktime since iTunes is such a memory hog. Please help.
You may get better results if you switch to this alternate version: iTunes for Windows (64-bit - for older video cards) and, if needed, reinstall QuickTime. The new (nearly) all 64-bit version doesn't seem to play well with QuickTime. Perhaps if DRM authentication is required QuickTime needs to be able to see something that is part of the older 32-bit code.
tt2
Maybe you are looking for
-
After I restored my iphone now it will not sync. What can I do?
-
Hello, I have unlinked all my devices from an old sync account and setup a new sync. In this process I have used the same email address as before. I have no use of my old sync account, therefore the question is: Can I delete the old sync account (via
-
Weird injection after CreateInsert in my bean...
Hi !. My doubt would be the following one... I have to analyze the use case from a friend... And he had a java class implementation of a View Object... The thing is that, when the app first enter my task flow there is a CreateInsert operation and the
-
ORA-48108/ORA-48140/ORA-48187 - Oracle 12c
Hello Experts, An error occurred while processing option SAP NetWeaver 7.4 Support Release 2 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: SQL statement or script failed. DIAGNO
-
Tax Entry is very Slow-Solution Needed.
Dear Experts, In Tax column, after selecting TAX Code, the system unually takes a long time to move from tax column. What is the reason for this? Please advise me solution. Best Regards Anand