Smartform name for Order confirmation?
hi people,
Can anyone tell me the <b>name of the smartform for orderconfirmation</b>
Regards
Rajasekaran.
Hi
Refer below
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci969816_tax299331,00.html?bucket=ETA&topic=299331
Yes, there is a free preconfigured Smart Form offered by SAP Labs for the SD Order Confirmation. The precise form kit you need may vary depending on your country and your current release level, but the download location for all of the preconfigured forms is service.sap.com/smartforms (follow the "Preconfigured Forms" link).
On a related note, you may wish to read my recent Weblog Why Bake Forms from Scratch on the SAP Developer Network.
As for your second question, there are a few ways to access the relevant SPRO (Implementation Guide for R/3 Customizing) transaction to switch the pointer to a Smart Form instead of SAPscript. In your case, one of the simplest ways is via transaction code NACE (Conditions for Output Control). From there, the steps are as follows:
1) Select 'V1' (Sales) 2) Click on the 'Output Types' button 3) Select the relevant output type (e.g. BA00) 4) Double-click on the 'Processing routines' folder 5) Double-click on the relevant transmission medium (e.g. 1 for printer). 6) The Smart Form entry field is near the top of the screen 7) On the same screen, you can update the print program entries and remove the obsolete SAPscript reference.
Caution: Even though a Smart Form is client-independent, the above configuration table is client-dependent. In other words, if you make the above change in client 100, it will not affect the settings in client 200.
Similar Messages
-
Standatd samrtfrom name for Order confirmation
Hi ,
What is the standard samrtfrom name for ordder confimataion and how to see standatd smartfroms, I see in NACE for for output type BA00 only forms is assingned there.
Appreiciate your help.
Thanks
Naveen/SMB11/SDORC_L
/SMB40/SDCON_DE
/SMB40/SDCON_FR
/SMB40/SDCSH_A
/SMB40/SDCSH_DE
/SMB40/SDCSH_FR
/SMB40/SDCSH_L
/SMB40/SDINQ_A
/SMB40/SDINQ_DE
/SMB40/SDINQ_FR
/SMB40/SDINQ_L
/SMB40/SDINQ_UK
/SMB40/SDORC_A
/SMB40/SDORC_DE
/SMB40/SDORC_FR
/SMB40/SDORC_L
/SMB40/SDORC_UK
/SMB40/SDQUO_DE
/SMB40/SDQUO_FR
/SMB40/SDQUO_UK
/SMB40/SDSDA_DE
Goto transaction smartforms type /smb* an hit an F4 then serach with with order confirmation u'll get the entire list.
кu03B1ятu03B9к
Edited by: kartik tarla on Mar 30, 2009 5:04 PM -
Smartform print program for order confirmation
Hi experts.
I am looking for a smartform print program for order confirmation.
The order confirmation in standard is a script with the name RVADOR01 and I tried to copy and change but I don't know which to eliminate and whcih to keep it.
If any body written the program already please provide me or provide the link to check.
Thanks in advance
Saithis is the processing form.
form processing.
data: lf_fm_name type rs38l_fnam.
data: ls_control_param type ssfctrlop.
data: ls_composer_param type ssfcompop.
data: ls_recipient type swotobjid.
data: ls_sender type swotobjid.
data: lf_formname type tdsfname.
data: ls_addr_key like addr_key.
data: document_output_info type ssfcrespd,
job_output_info type ssfcrescl,
job_output_options type ssfcresop.
perform get_data.
check retcode = 0.
perform set_print_param using addr_key
changing ls_control_param
ls_composer_param
ls_recipient
ls_sender
retcode.
*Get the Smart Form name.
if not tnapr-sform is initial.
lf_formname = tnapr-sform.
else.
message e001(/smb40/ssfcomposer).
endif.
determine smartform function module for invoice
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = lf_formname
importing
fm_name = lf_fm_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
error handling
retcode = sy-subrc.
if sy-subrc = 1.
message e001(/smb40/ssfcomposer).
endif.
if sy-subrc = 2.
message e002(/smb40/ssfcomposer) with lf_formname.
endif.
perform protocol_update.
endif.
call function lf_fm_name
exporting
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
is_nast = nast
is_vbdka = vbdka
is_addres = addr_key
importing
document_output_info = document_output_info
job_output_info = job_output_info
job_output_options = job_output_options
tables
it_vbdpa = tvbdpa "Item information
it_vbdpau = tvbdpau "Subitem numbers
it_vedpa = tkomservp "Contract Item Validity
it_vedka = tkomservh "Contract Header Validity
it_vedpn = tkomservpn "Contract Item Cancellation Data
it_vedkn = tkomservhn "Contract Header Cancellation DA
exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
retcode = sy-subrc.
perform protocol_update.
get SmartForm protocoll and store it in the NAST protocoll
perform add_smfrm_prot.
endif.
endform. "processing -
Standard smartforms for order confirmation
Hi all
i search the standard smartforms for order confirmation. What's the name for this form....
i have only find for invoice LB_BIL_INVOICE and for Delivery LE_SHP_DELNOTE, but not for oder confirmation....
thx abap_begin....Hi,
For the printing of the order confirmation there is a standard script RVORDER01. You can find this in transaction NACE by choosing application as V1 then output type as BA00 and then Processing routines.
Regards
Dillip Sahoo -
To create varaibles in Mail Forms for Order Confirmation
Hi All,
I am having an requirement to send an email for order confirmation with some customer dependent data and some product data to be sent along in the mail, This has to be done through action.
I want to use mail forms for this but in this I am not able to create variables in the mail form through which i can pass th value to the variables in the mail form.
Please suggest what to do for variable creation in mail form.........
Is there any standard oder confirmation template available as it is available for campaign??????
Thanks and Reagrds
MayankHi Mayank,
I am not sure but u can try below standard smartforms :
CRM_SERVICE_CONF_EXT
CRM_ORDER_SERVICE
Regards,
Dipesh. -
Standard print program for order confirmation
Hi All,
I have created smartform for sales order confirmation,now i want to attach it to output type i need standard print program for order confirmation.Do we have any standard program for the same ?
Thanks in advance
ShrilaHi Shrila,
refer to the thread below:
Order confirmation smartform
With luck,
Pritam. -
Output Control Routine for Order Confirmation
Hi,
I have a problem in sending out order confirmation when the customer have a credit block, no order confirmation is being sent.
Checked on transaction NACE, the routine for Order Confirmation (Routine 2), returns a sy-subrc =4
when the credit block is set. What is the best way to correct this?
Thanks,
CatherineCreate the new routine in VOFM->Requirement->Output Control. Make the required changes in routine source text and assign it to output procedure (NACE).
Thank You,
Ganesh -
No condition maintained for Order Confirmation output type but still active
Hi,
I have NOT maintained any Condition record for Order confirmation Output(BAFX) but still it is generated and Fax instruction is being sent to the Sold to Party. Also i found that NO condition record for Order confirmation output(BA00) is also maintained but still Order confirmation is still being triggered.
Actually i want that NO Fax instruction is to be sent for Order confirmation for some of the customers.
Kindly advise.
Thanks,Hi vk@sap,
Check in the output analysis how the output was determined, so that you can know why they're still determined.
Thanks,
Mariano. -
Standard SApScript / Smartform name for FB75 (credit memo) transaction
Need to know Standard SApScript / Smartform name for FB75 (credit memo) transaction..
hi
check SPRO>Financial Accounting>Accounts Receivable and Accounts
Payable>Customer Accounts>Line Items>Correspondence>Carry Out
and Check Settings for Correspondence
surya -
Pls help me to find the smartform name for RMA REQUEST(RMA)
Hi Experts,
Pls Tell me how too find the smartform name for RMA REQUEST(RMA)
Pls help
Thanks and regards
JayaWHat is RMA REQUEST form please ellobrate your query
the smrat form tcode is SMARTFORMS.....you can try -
Need the SMARTFORM name for Purchase Order in ECC 6.0
Hi experts,
I have been working on ECC 6.0 version and I need your help in finding out the name of the SMARTFORM for Purchase Order. Please let me know the SmartForm name if anybody knows. Waiting for your replies.
Regards,
RaviHI,
We have the Smartforms in the Service.sap.com, you need to download from this one. in our SAP we do not have these smartforms .
smartform name is /smb40/mmpo_l. Look at the SAP Note 695891
Look at the below link
Re: PURCHASE ORDER SMARTFORM IN ECC 6.0
<i>Mark all the helpful answers</i>
Regards
Sudheer -
Table name for order schedule line changes
Hi Friends,
There is a background program running periodically. Sometimes line items confirmed dates changed, we want to know a way that what line items for orders are changed. Is there any table, which would give the schedule changes information for the line item or there any other method to find it. Your answered much appreciated. Thank you!
Regards
Raji
Edited by: raji reddy on Jun 5, 2008 4:24 PMHi Raji,
These are the standard tables where SAP stores change details for all areas of the system. The initial key is the object class and you need to enter this to get a quick access via SE16 - VERKBELEG is the key for sales documents. If you then have, for example, a sales order number you can enter that (but ensure you enter leading zeroes) and a table and/or field name.
Regards,
Brian -
Output Through FAX and Email for Order Confirmation
We are yet to have this in our system and in requirements gather phase for my FS. I request you to help me in finishing this .
so far i considered the following
The following information is required :
1. To all SD documents ? ( For eg : Order Confirmation,Delivery Note ,
Legal invoice )
2.Need to have a fax number/Email maintained for a customer
3. Frequency of the ouput?
4. Is duplication of output through email/Fax is required ?
5. If sent by mail, in simple mail/ an attachment in pdf required and
what shall the subject line contain?
Please guide if i am Missed any requirement gathering . pls write me or send some kindaa FSHi Yuvraj
Kindly check the links for the output configuration and other inputs also
[https://wiki.sdn.sap.com/wiki/display/ERPLO/OutputDeterminationOverview]
[https://wiki.sdn.sap.com/wiki/display/ABAP/SendSpoollistofbackgroundjobtoSAPinbox]
[https://wiki.sdn.sap.com/wiki/display/ABAP/PDFDownlaodByCreatingSpool+Request]
Regards
Srinath -
SDQ segment for Order Confirmation
hai all
customer sends in purchase order with only one line item but has 10 ship to party with their respective quantity. this is done with help of ILN(international location no).we have custom segment below E1EDPA1, which has ILN, qualifier for ILN, quantity, UOM fields init.
Individual sales order is created for every ship to party and order confirmation idoc is also created and collected. Now with custom program i have to create single idoc with custom idoc type ZORDERS05 with all
the collected idocs, which should have only one line item and all ship to paty in ILN(custom segment). can any one help me in this matter. if you have any code for this scenario pls provide.
thanks and regards
vijayHi,
For the printing of the order confirmation there is a standard script RVORDER01. You can find this in transaction NACE by choosing application as V1 then output type as BA00 and then Processing routines.
Regards
Dillip Sahoo -
V/30: Include NAME1 in Document Title for Order Confirmation per Email
We have configured a sales order output condition for forwarding order confirmation per email. Within the document title (Mail Title & Texts) there is reference to e.g. &VBAK-VBELN& etc. Is it possible to add NAME1 within the title?
Case resolved - can use KUAGV-NAME1
Maybe you are looking for
-
OWSM SAML verification and Must Understand error
Has anyone verified SAML tokens generated by JDev proxies by OWSM? I tried to use the simplest scenario (similar to what I had tested when verifying SAML with Application Server) with OWSM. I don't use signature and just sender vouches at the proxy s
-
I need to update a geom field(defined as mdsys.sdo_geometry) of a remote table via database link,but I failed; This is the SQL statement and the error; update [email protected] set shape=mdsys.SDO_GEOMETRY(2002, NULL, NULL, mdsys.SDO_ELEM_INFO_ARRAY(
-
How can I recover a iTunes backup that was deleted/replaced?
I recently did the iOS6 update from my computer. I plugged up my phone to iTunes and it downloaded the software and backed up my phone just fine no problems. Somehow my phone didn't restore with everything like it should of, but I wasn't worried beca
-
How do I fix this issue? I have already reset my password as well as logging out of my icloud and logging back in ... Still not working
-
hi, i am creating a DNS query message, but when i send out my package, in wirshark i capture that in my package the question is unknow my package carry a domain name like "www.sun.com" and send to one of the root dns using type a. but the question is