Smartform not giving output if more than 2 pages
Hi1
I have a smartform which basically has three parts the first page , the next page and the TC page which is the terms and conditionspage. This is a smartform for printing QUotes. If the quote has a very few line items in it then its running out fine printing the first page and followed by the terms an conditions page , but if there are say 100 items in it and I try outputting the form , it tells output cannot be issued, I treid with various options and I see that whevere the items are more than it can fit into two pages it gioves me a message that output cannot be issued. I have a very similar form for another region , that seems to be working fine , even when there are more than 2 or more pages but for this one of my form it dosent go beyound the second page of line items , it just gives me the message output cannot be issued.
Could anyone please indicate where teh problem could be that si cauisng this .
Thanks
Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks
Similar Messages
-
Spreadsheet output on more than one sheet in the same workbook
I have created many reports having the output being a spreadsheet. But the output is on 1 worksheet in 1 workbook. Any thoughts on how to make 1 report output to more than 1 worksheet in 1 workbook?
We are using Reports 10g.
Thanks!!
KrisUnfortunately, this can't be done with Pages, nor could it be done with AppleWorks. I think the assumption is that you would merge into a letter & one letter sent per person. In checking the 3 postcard templates in Pages 3, none of them have address book fields to drop contacts into.
There is a workaround, but it might not be worth the effort. Create your postcard as a single, large document in page layout in landscape & merge to a new document. Then, in the print dialog, choose Layout from the drop-down menu that says Copies & Pages & choose 4 from the Pages per Sheet menu. You might also want to add a hairline border for cut lines. -
Safari will not let me keep more than 3 windows open, when I try to open 4th, one goes away, just installed 9.4 last week, nothing but problems
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
NTLM Authentication : why is it not possible to create more than one NTLM realm ?
Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
RegardsWell, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J -
why can i not seem to order more than one print at a time, which of course becomes expensive with shipping, it does not seem to offer me the facility to choose again? either order or cancel!
make an album containing the photos you wnat to print, select all photos in the album and order
LN -
Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?
Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using? -
IPhone will not display calendar items more than one day in advance.
iPhone will not display calendar items more than one day in advance.
I used to have a droid and loved the calendar on the main screen that used to show me the next few appointments coming up - so far I have only figured out how to put in to show for next day or 2 days or etc....
is there any way to show tomorrow and next few days in notification, or is there a good app out there that will greet me. dont have 4s to ask just a 4
i used google calendar and they all show up in calendar but REALLY need the functionality to see what is coming up, kind of like what you see in outlook or any other email program.
please help out this noob.Is this what you're doing:
OS X Yosemite: Recover your entire system -
9.3.1- Not able to see more than 1 errors in application.log file
Hi,
In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
If anybody has faced this solution, pls let me know the cause.
Thanks
jazzHey Jazz,
in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far -
Not able to select more than two values
Based on picklist.fmb, I created a list item in a form.
I am able select many values using SHIFT but I am not able to pick more than two values using CTRL key.
Anything I did mistake or picklist won't support picking more than two values using CTRL?
Also I am not able to get the scroll bar attaching to this list item.
Please advise.
Thank you,
Prasadhi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want. -
Not able to update more than 10,000 records in CT04 for a characteristic
Hi all,
We are not able to update more than 10,000 records in CT04 for a certain characteristic.
Is there any possible way to do this?
Please advise...its a production issue.
Thanks.Hello ,
Please consider using a check table for the characteristic involved if you are working with large
number of values assigned
With a check table you have a possibility to work with a huge amount of values , also the performance should improve
Please refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
Section - Entering a Check Table
Hopefully the information helps
Thanks
Enda. -
Not able to view more than two line in table control
Hi all,
I am not able to see more than two lines in table control. Although my table control height is 21...
Please see attached pic and suggest me what to do.hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want. -
Is it true that iPhone 4s does not allow to take more than 1000 photos?
Hi!
Is it true that iPhone 4s does not allow to take more than 1000 photos?
http://dolboeb.livejournal.com/2299939.htmlNot true.
Only Photostream is allowed to take a max of 1000 photos, then they will be removed from server/icloud. -
Report not giving Output correctly
hi all
The problem is about Pending invoice report. But this report is not giving output correctly.
Plz help me to solve the problem.
Thanks
SubhasishHi Mishra,
Invoice output is coming correctly- assuming you have calculation error then check the print program assigned to your invoice output condition type. It must be having some logic error.
If the issue is with improper formatting then check the layout assigned to your invoice output conditon. You can check both the program and layout assingment to ouput condition at NACE transaction.
This is regular task which abapers can do with ease. so please take their help. They can just do a simple debug to understand the issue.
regards
sadhu kishore -
We can not redownload paid application more than 5...
I am using Nokia E71
in Nokia store
we can not redownload paid application more than 5 times in "MY STUFF" area in the nokia store
we can not purchase application permanetly in Nokia store@pgangwani35
Don't know where you got the 5 times idea from as if you expand "How do I reinstall Nokia Store applications" in this resource you will find that it is 10 times:http://www.nokia.com/sa-en/support/product/e7-00/troubleshooting/?action=productFAQSearch&qt=Nokia%2...
Happy to have helped forum with a Support Ratio = 42.5 -
Got SQL *Plus query output in more than one in a single page
Hi All,
I have write a SQL *Plus code for execute one SQL query and registered as concurrent program. But I have got the output more than once in a single page after running the concurrent program. I am not getting what is the my code problem. Please can any one help me.
This is my SQL code.
-- These commands are added by applications concurrent manager
SET TERMOUT OFF
SET PAUSE OFF
SET HEADING OFF
SET FEEDBACK OFF
SET VERIFY OFF
SET ECHO OFF
WHENEVER sqlerror exit failure
-- set user environment
SET pagesize 999
SET linesize 860
SET appinfo on
SET tab off
SET newpage none
SET heading on
--SET colsep ','
-- define heading/footer
--ttitle -
-- left currdate -
-- center 'SSFT Open PO Report' -
-- right 'Page : ' format 999 sql.pno -
-- skip 1 -
-- center 'Organization US / Type Contract Labor / Status - Open' -
-- skip 2
--btitle -
-- skip 1 -
-- center 'Scansoft Inc. - All information confidential'
-- define columns
CLEAR columns
SET heading on
COLUMN c1 format a30 heading '"Last Name"' trunc
COLUMN c2 format a30 heading '"First Name"' trunc
COLUMN c3 format a50 heading '"Employee Name"' trunc
COLUMN c4 format a20 heading '"Timecard Number"' trunc
COLUMN c5 format a40 heading '"Expenditure Batch"' trunc
COLUMN c6 format a24 heading '"Weekending Date"' trunc
COLUMN c7 format a24 heading '"Expenditure Item Date"' trunc
COLUMN c8 format a20 heading '"Expendtrmonth"' trunc
COLUMN c9 format a20 heading '"Expendtryear"' trunc
COLUMN c10 format a24 heading '"Sortdate"' trunc
COLUMN c11 format 999999999 heading '"Task Id"'
COLUMN c12 format a30 heading '"Task Name"' trunc
COLUMN c13 format a30 heading '"Task Number"' trunc
COLUMN c14 format a24 heading '"Closed Date"' trunc
COLUMN c15 format a30 heading '"Project Name"' trunc
COLUMN c16 format a30 heading '"Project Number"' trunc
COLUMN c17 format a30 heading '"Project Status Code"' trunc
COLUMN c18 format a30 heading '"Expenditure Type"' trunc
COLUMN c19 format a30 heading '"Expenditure Org Name"' trunc
COLUMN c20 format 999999999 heading '"Organization Id"'
COLUMN c21 format a50 heading '"Projmrg"' trunc
COLUMN c22 format a25 heading '"Role"' trunc
COLUMN c23 format a24 heading '"Projmrg Start Date"' trunc
COLUMN c24 format a24 heading '"Projmrg Start Date"' trunc
COLUMN c25 format a35 heading '"Job Name"' trunc
COLUMN c26 format a35 heading '"Project Type"' trunc
COLUMN c27 format 999999999.99 heading '"Quentity"' trunc
-- define breaks & computes
--break -
-- on report skip 2 -
-- on c30 -
-- on c20 skip 1
--compute avg label 'Average' of c210 on report
-- select statement here
SELECT papf.last_name || '' c1, papf.first_name || '' c2,
papf.full_name || '' c3, pea.orig_user_exp_txn_reference || '' c4,
pea.expenditure_group || '' c5, pea.expenditure_ending_date || '' c6,
peia.expenditure_item_date || '' c7,
SUBSTR (TO_CHAR (peia.expenditure_item_date), 4, 3) || '' c8,
SUBSTR (TO_CHAR (peia.expenditure_item_date), 8, 2) || '' c9,
TO_DATE (SUBSTR (TO_CHAR (peia.expenditure_item_date), 4, 6),
'MM/YY'
|| '' c10,
peia.task_id || '' c11, pt.task_name || '' c12,
pt.task_number || '' c13, ppa.closed_date || '' c14, ppa.NAME || '' c15,
ppa.segment1 || '' c16, ppa.project_status_code || '' c17,
pet.expenditure_type || '' c18, haou.NAME || '' c19,
haou.organization_id || '' c20, pppv.full_name || '' c21,
pppv.ROLE || '' c22, pppv.start_date_active || '' c23,
pppv.end_date_active || '' c24, pj.NAME || '' c25,
ppa.project_type || '' c26, peia.quantity || '' c27
FROM pa.pa_expenditures_all pea,
pa.pa_expenditure_items_all peia,
pa.pa_tasks pt,
pa.pa_projects_all ppa,
hr.per_all_people_f papf,
hr.hr_all_organization_units haou,
pa.pa_expenditure_types pet,
apps.pa_project_players_v pppv,
hr.per_jobs pj
WHERE pea.expenditure_id = peia.expenditure_id
AND peia.task_id = pt.task_id
AND peia.job_id = pj.job_id
AND pt.project_id = ppa.project_id
AND pea.incurred_by_person_id = papf.person_id
AND pea.incurred_by_organization_id = haou.organization_id
AND pet.expenditure_type = peia.expenditure_type
AND ppa.project_id = pppv.project_id
AND pppv.end_date_active IS NULL
AND pea.expenditure_ending_date >= SUBSTR (SYSDATE - 545, 1, 9)
ORDER BY papf.full_name ASC,
pea.expenditure_ending_date ASC,
peia.expenditure_item_date ASC;
--spool off
Thanks in advance
--SubhasHi
Either remove the semicolon (;) or the slash (/) at the end of your query, as both will execute it.
Maybe you are looking for
-
How can I get my password protection software to work?
Cannot see how the Trusteer Rapport software can be used with this version of Firefox, it used to sit beside the webpage address and could be turned on to protect passwords, now although it is loaded on both my Mac's it does not appear to be working?
-
How to send data from database to textimput
How to do this correct? [php] if ($_POST['request'] == "pokazOnas") { $sql = mysql_query("SELECT text FROM podstrony WHETE podstrona=Onas"); $result = ""; $result .= '<tab>'; while($row = mysql_fetch_array($sql)) $result
-
Memory maxed out when running weblogic 4.5
I am the tech support guy for my office, but I am WebLogic illiterate. I have a user who is running WebLogic, but when he runs it, his RAM and virtual memory max out. Are there any settings in WebLogic for memory allocation? Or is there a known probl
-
ISE1.1 Posture Compliance not working
Hi I am facing problem with ISE Posture Compliant working... -- ISE Authorization Policies are working ok , but when i am creating Posture Policy for Client machine which doesn't has AV installed at all . In this case still on report it says that Pos
-
"add and remove projects" problem in eclipse weblogic tool 1.1.3
Hello, i installed eclipse weblogic tool 1.1.3. When i try to add a project to the server, it cannot even list my java projects. I found out that it only list those dynamic web projects. My question is: is it possible to add java project to server. M