Smartform Not printing in German (DE), its only printing in English (EN).

Hi,
I have a smartform for which the original language is German (DE) and it'll be used in English (EN) too. So, I have made the changes in German (DE) and later used SE63 to translate to English (EN); transported it to Quality for testing.
Here, in Quality when I am testing it in English (EN), its working perfectly fine and the output is displayed in EN. However, when I am logging into quality system with DE language and testing the smartform it's displaying me the smartform in English (EN) not German (DE). But, when I am checking the smartform in 'smartforms' transaction code (in display mode) the text is in German only.
I am really confused, please help.
Thanks,
Vishal.

Hi Vishal,
Even i had faced the same problem.
Irrespective of login language it was showing text in English. I was also using 'DE' language.
I just maintained the translations for that text in 'DE' through transaction se63.
And moved the Transport request to Quality.
In Quality when you login with 'DE' language, it will reflect your changes.
This is what happened in my case. Also same happened with other smartform in Chienese language also.
Thanks,
Archana

Similar Messages

  • SmartForm not printing some values when output type triggered automatically

    Output type 'ZD00' for billing is created and configured in NACE with 'send immediately (when saving the application)'. I'm creating a billing document in VF01, then this output type is triggering perfectly. But when I check the form output in spool price and discount values are not displaying. And for the same billing document, when I go to VF03 and selects issue output to and execute the same output type its giving all the perfectly.
    What could be the problem ?

    there we go, you might want to have a look at RVADIN01 which is the standard driver program for invoice printing.
    Your main interest should be to see how they select their prices, and then learn from it and adopt your program accordingliy.
    Yeah RVADIN01 is a SAP-SCRIPT driver program, but the selection of data is the same as in SMARTFORMS, so dont be afraid to use their logic.
    regards.

  • HT204411 I just need to purchase a song that is not available in itunes country, its only available in the USA. Is there anything I can do as all my efforts so far have not been successful. Thanks

    I am trying to purchase a song that's not available in the itunes South Africa. The song I am trying to buy is only on itunes USA. Is there anything that I can do because usually all I need to do is switch shops but it doesn't seem to be working on this particular song. Thanks

    You need to be in a country to use its store, so unless you are in the US with a US billing address on your account then you can't buy from the US store - you can only use the South African store. You can try requesting that the song be added to the South African store, but unless the rights-holder agrees to it then Appl won't be able to sell it there : http://www.apple.com/feedback/itunes.html

  • MY I POD WILL NOT TURN ON OR ANYTHING ITS ONLY ABOUT A YEAR AND HALF OLD

    i pod will not turn on just stopped working one day only year in half old

    Take it into Genius Bar for an exact quote, but it sounds very bad.
    The screen is only supposed to bend *so far* ... you exceeded that, which means screen/hinge repairs.
    The impact may have damaged the logic board as well.
    You may decide to buy a new one instead.
    But first ask your home owner's insurance agent if their policy covers this.

  • HT4623 while updating to ios6 my phone stopped mid way and will not continue or come on its only showing the apple logo. Anyone else having this problem

    While downloading iOS6 my phone stopped mid stream now its stuck on the apple logo and wont turn off or on or do anything. Is anyone else having this problem

    If your iPhone is listed in iTunes, click Restore on the Overview page and follow the instructions on screen.
    Should iTunes not detect your iPhone, try the following:
    Turn the device completely off and remove the USB cable from your iPhone while keeping the other end of the cable plugged into your computer.
    Now take your phone and press the home button.
    While you keep the Home button pressed, reconnect the USB cable to your iPhone
    Continue pressing the home button until the "Connect to iTunes" logo appears on your iPhone
    Now follow the instructions on your screen to restore your iPhone
    For more details check out http://support.apple.com/kb/HT1414
    Hope this helps,
    Chris

  • Why does Adobe Reader do not print in English on my computer ?

    I go a e-mail from honeywell company with an attachment.  Why does Adobe Reader transform the e-mail from English to some other languge?

    Hi Margaret,
    I'd like to help! Would you mind sharing a bit more detail? What language does it appear to be? Has this happened with other PDF's? When you installed it - did you select English as the language?
    Looking forward to your response.
    Kind regards, Stacy

  • Smartforms lines not printed

    Hi,
        I am using 4.6c.I have designed a smartform using templates.I have choosed the frames patterns in templates.In print preview everthing is perfect,but when i try to print this,Its showing only the texts.The lines were not printed.Its a complex format,So i used templates to do that.
    Actually we dont know whether this an ABAPER problem or basis problem.
    Cany anyone help me with step by step procedure what to do this.Because this is urgent.I have taken a copy in laser printer,Dot Matrix printer too.
    But in no printers the lines are coming

    hai,
         i also faced the same problem.
         i think basic problem..
    anyway i will say how i managed,
    1. just create window (width of the window should be .04)
          in output option of window  -->in preview select the one sided line(right or left).
    2.create a text in that window with simple dot(.) in text editor (window will not appear without any content in it so to provide some text we have provided dot(.) ).
    3. place the window where u want line.
    shan.
    Edited by: shan palani on Sep 30, 2008 2:53 PM

  • Page data not printed in smartform...

    I have a smartform in which I want to print some data in the last page. So after the NEXT Page, I inserted the following nodes
    1. Page node - LAST. Its next page is also set as LAST. The next page of NEXT page is also set as LAST.
    2. Page window. window type - main window.
    3. Program lines node. Here I fetch data from some tables a create an internal table with 2 columns of data. I am not able to debug this code during runtime and so I cannot confirm
    if data is being fetched here !!! How to do that ??
    4. Loop node - Here I loop thr the internal table populated in the program lines and store in a structure , say ST_TEMP.
    5. Under loop node I have the TEXT node where I display the data as:
       &ST_TEMP-COL1&        &ST_TEMP-COL2&
    Now the issue is data is not printed on this page. What could be wrong ? I tried inserting a hard break point in the program lines but control did not stop there.
    Is there any way I can figure out what can be wrong ?
    thnks

    >
    > Looks like the last page is not called !!! I can see data only on one page and it shows page 1 of 1.
    >
    > "make sure ST_TEMP is filled with data" how do I do this ?? My program line node has the data filled in the internal table it_temp and the loop node has the data transferred to st_temp for every row. How can I debug the program lines code ??
    > > Have a break <username> in the program lines. and check it_temp has data in it.
    > "use a command and call the last page at end of the loop on internal table"...how to do this ?
    > > like program lines there is a "command line" do a little search on SDN for more info on how to use command lines for next page.
    >

  • HP Deskjet All in ONe L7650 will not print black only --

     Started doing this with previously working black cartridge, updated software--prints, but blank page comes out when set to black ink only; prints other colors. 
    Changed black print cartridge and still will not print black.  Diagnostic page prints other colors.
    Printhead health shows good for all colors.

    What brand of printer cartridges (not printhead) did you use the last time you changed them?  I don't know if it was because one or both of my printer cartrdiges went dry, but I put new cartridges in (not printhead) and it improved somewhat--I kept trying to clean the printheads but it seemed to never get resolved.
    I refuse to have to buy new printheads.  I tried several cycles of "align printheads" "clean printheads" and never got a decent print out, but I did get to the point of all the colors printing although magenta printhead makes printing errors and so I never know what I am going to get with color anymore.  
    It seems to be at its worst when printing in "draft" but in normal or best (with more ink coming through) it seems better--the higher ink volume seems to cover some of the problems with the printheads.
    So, I am justing using it "as is" and not replacing the printheads--because it is a waste and yes, could almost get a new printer for this cost.
    I wish I had never gotten this All in One and just stuck with the old 970 csi and the old UMAX scanner, which was a better scanner, but thought I would "save some space" by getting this since it scans legal, which I needed.
    Just keep trying to reseat the printheads (also trying to reclean them, which seems to make it worse) and keep printing out those "tools" alignment and cleaning procedures.  
    But no help from HP.

  • Purchase Order Changes not printing in Smartform

    Hi friends,
    first time whenever i create PO smartform printing after if i change quantity and save smartform is not prinitng with the lastest changes?
    please help me

    thanks for your reply
    first time when i create PO smartform is printted and also i ma bale to see in messages tab with green color entry..
    after PO changing in ME22n there is no scond entry in messages tab and not printted.
    i have maintained condition record, and i am able to create printout when i create a new PO.
    but chnages its not happening please help.

  • Header Area of Table is not printing on Next Page in SMARTFORM

    Hi All,
    I am facing one problem while Developing a smartform for Delivery.
    I want the same data to be copied to the Next page which is coming on first page. I copied the Main window to Next page with all the details but the Header of the Table is not printing on the Next(Second) page.
    Please help me out regarding this...
    Thanks in advance for your help....
    Thanks & Regards,
    Digamber

    Hi,
    If you are talking about the table (which you created in the main window) and you want the header of the table to be printed on the next page. Is it because of overflowing that's why its printed to the next page?
    If yes, the header cannot be printout out.
    Just for your information. If you want a window in the first page to be copied to all subsequence pages, set the window type to be copies window.
    Hope it helps.

  • Smartforms main window is not printing

    Hi,
    I would like to ask what to do with this problem.
    The smartform main window is not printing in all the pages.  All the other windows, even the window with the total data is printing.  The only problem is the contents of the main window is not printing.
    Also, the problem only happens when the I've changed printer.
    When I use LOCL as printer, the smartform is OK but when I change the printer, the problem is encountered.
    This also happens when I change environment from development server to production server.  In production server, even the LOCL printer is encountering the problem.
    thanks.

    Hi Mike,
    Have you checked the device type in transaction SPAD? Try to click on Full Admininstration from application toolbar and select device types.
    Hope the above helps.
    Cheers,
    Patrick

  • Some fields in form not printing but do print when printing fields only

    Hope that someone can help with this. I have filled in some forms (supplied by a third party) and when I print these forms the content of some fields are printed, and some are not. I have found out that if I cut a field's content, then paste into the same field, then tab out of the field, then the field content will be printed. I have about 20 of these forms with a lot of fields, so I would prefer another solution ;-)
    The strange thing is, when I choose to print fields only (I have Dutch version of Acrobat, not sure if it has that exact name in English) ALL fields are printed correctly!
    I have scanned the forums and tried several printing options, including printing as image.
    I have tried using Acrobat 8.1.6 Standard on Windows (at the office) and the latest Acrobat Reader on both Ubuntu Linux and Mac OSX (at home) with the same results.
    Any suggestions?
    thanks
    Paul

    The first time I chatted with iTunes support they ended it by giving me 2 free song downloads. No offense, but I don't want to download anything but what I've already paid for. The second person to help me through email support gave me 6 free song downloads. This is frustrating because neither can offer a solution to why iTunes says 6 of this album's tracks are downloaded to my computer and won't allow me to redownload them... BUT on another device I can redownload the album in its entirety. That sounds like a very technical question that I just don't think they train their support staff to handle.
    So, does anyone know how I can get this computer to UNRECOGNIZE these songs as downloaded, thus allowing me to download the full album to this computer?!

  • Smartform - text not printed bold

    Hey guys, hope anyone can shed some light on this.
    We have invoices with a smartstyle attached, using font Verdana.
    Some texts are marked as bold in the smartforms.
    Now, my problem:
    When printing from any environment (DEV, PRD) using one of the printers configured in SAP, text marked as bold is not printed in bold.
    When printing the same invoice using LOCL, and sending it to the exact same printer from windows, text marked as bold is printed in bold.
    So I guess it's not the form, it's not the style, it's not even the printer: just the printer settings in SAP.
    In many ways, it  is very similar to the issue addressed in this thread:
    [Printer Setting|Printer Setting] , except that when previewing the text doesn't show as bold.
    My question is two-fold:
    - How likely is it that this issue is related to the printer configuration (and thus, basis config)?
    - If yes to the above, how do I verify this? I need something solid, since the SAP basis guys aren't very cooperative and keep pointing out that it's either the smartform or the smartstyle - without researching themselves
    Thanks in advance.

    Hi,
    I think its the issue of the basis people,they need to make the settings. We had a similar problem here,we had to change the printer settings in SPAD,affter the basis peole had made the settings for us, for taking printout in hindi.
    Thanks.

  • HP 6500A Plus will not print black only if any color cartridges are low. It used to. Why not now?

    HP 6500A Plus will not print black only if any color cartridges are low. It used to. Why not now? It will print in color if the black is low but not if any color is low. This is very annoying. Printer is using HP cartridges too.

    Get used to this with HP printers - its a new feature they have introduced to keep running costs lows - works well. Had two HP printers same happened with both of these. Suggest a different brand - they might not have this special feature

Maybe you are looking for