Smartform output as PDF via mail
hello,
Where can I mention the device name for my requirement as mentioned in the subject.
I found that system picks the default device in the user profile. How can I avoid that.
I want to give a particular destination device name.
Please help.
Thanks.
Hello,
I solved it by setting COMPOSER_PARAMETERS-TDDEST to device of my interest and then USER_SETTINGS = SPACE.
Now system will not pick device from User Profile.
Thanks for old posts in SDN.
Solved.
Similar Messages
-
Problem in sending the Smartform Output as PDF through Mail
Dear All,
I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file, it is giving error that FILE IS DAMAGED. Below is the code:
REPORT Y_SEND_MAIL2.
TABLES: vbrk, vbrp.
TYPE-POOLS: abap.
DATA: it_vbrk TYPE TABLE OF vbrk WITH HEADER LINE.
DATA: i_formname TYPE tdsfname,
i_fm_name TYPE rs38l_fnam,
it_vbak TYPE TABLE OF vbak WITH HEADER LINE,
it_ekko TYPE TABLE OF ekko WITH HEADER LINE.
DATA: is_bil_invoice TYPE lbbil_invoice,
output_options TYPE ssfcompop,
control_parameters TYPE ssfctrlop,
e_devtype TYPE rspoptype,
job_output_info TYPE ssfcrescl,
bin_file TYPE xstring,
lines TYPE TABLE OF tline WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
filelength TYPE i,
bin_filesize TYPE i,
docs TYPE TABLE OF docs WITH HEADER LINE.
*"Types
TYPES: t_document_data TYPE sodocchgi1,
t_packing_list TYPE sopcklsti1,
t_attachment TYPE solisti1,
t_body_msg TYPE solisti1,
t_receivers TYPE somlreci1,
t_pdf TYPE tline.
*"Workareas
DATA :w_document_data TYPE t_document_data,
w_packing_list TYPE t_packing_list,
w_attachment TYPE t_attachment,
w_body_msg TYPE t_body_msg,
w_receivers TYPE t_receivers,
w_pdf TYPE t_pdf.
*internal tables
DATA : i_document_data TYPE STANDARD TABLE OF t_document_data,
i_packing_list TYPE STANDARD TABLE OF t_packing_list,
i_attachment TYPE STANDARD TABLE OF t_attachment,
i_body_msg TYPE STANDARD TABLE OF t_body_msg,
i_receivers TYPE STANDARD TABLE OF t_receivers,
i_pdf TYPE STANDARD TABLE OF t_pdf.
DATA: BEGIN OF line_bin,
data(1024) TYPE x,
END OF line_bin.
DATA: data_tab_bin LIKE STANDARD TABLE OF line_bin.
So please suggest a solution.
Regards,
VishalContinued:
SELECT-OPTIONS: s_vbeln FOR vbrk-vbeln,
s_fkdat FOR vbrk-fkdat OBLIGATORY DEFAULT sy-datum.
SELECT * FROM vbrk
INTO TABLE it_vbrk
WHERE fkdat IN s_fkdat
AND vbeln IN s_vbeln.
i_formname = 'Z_SD_JINDAL_INVOICE10'.
output_options-tddest = 'LP02'.
output_options-tdimmed = 'X'.
output_options-tdnewid = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = i_formname
IMPORTING
fm_name = i_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0. "checking subrc
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. "IF sy-subrc <> 0
READ TABLE it_vbrk INDEX 1.
IF sy-subrc = 0.
is_bil_invoice-hd_gen-bil_number = it_vbrk-vbeln.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION i_fm_name "'/1BCDWB/SF00000097'
EXPORTING
control_parameters = control_parameters
output_options = output_options
user_settings = space
is_bil_invoice = is_bil_invoice
IMPORTING
job_output_info = job_output_info
TABLES
it_vbak = it_vbak
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*FORM convert_otf_2_pdf.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
* EXPORTING
* USE_OTF_MC_CMD = 'X'
* ARCHIVE_INDEX =
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = job_output_info-otfdata[]
doctab_archive = docs[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDFORM. "convert_otf_2_pdf -
Smartform Output to PDF conversion
Hi experts,
i want to convert the smartform output to PDF Format and stored it in system level.But i got the following information message "OTF end command // missing in OTF data".
I used "CONVERT_OTF" for conversion of smartform output and "WS_DOWNLOAD & GUI_DOWNLOAD".
wt it means,can i make any changes,if tl me why it shows the message.
points wl be rewarded.
Thank you
chandu
Edited by: Chandu Valluri on Jan 4, 2008 12:56 PMhi,
*& Report ZPDF_DNLD_TEST2 *
*& DEVK904540 *
REPORT ZPDF_DNLD_TEST2 .
data: i_otf LIKE itcoo OCCURS 100 WITH HEADER LINE,
i_pdf LIKE tline OCCURS 100 WITH HEADER LINE.
data: op_option type SSFCTRLOP,
job_output type SSFCRESCL.
op_option-getotf = 'X'.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = op_option
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
itab1 = itab1
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = job_output
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE =
BIN_FILE =
TABLES
otf = job_output-otfdata
lines = i_pdf
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = 'c:\test_pdf_sf.pdf'
FILETYPE = 'BIN'
tables
data_tab = i_pdf
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Converting smartforms output into PDF
Hi ALL,
How to convert the smartforms output into PDF based form. After executing the form, it should directly open in PDF. How to do this?
Points will be awarded.
Thanks and regards,
vinoth.Hi Vinoth Kumar,
Please go throuh the below procedure and sample Code, this might help you.
Procedure
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
cparam type ssfctrlop,
outop type ssfcompop,
fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
file_size TYPE i,
bin_filesize TYPE i,
FILE_NAME type string,
File_path type string,
FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
bookings type ty_bookings,
connections type ty_connections.
start-of-selection.
suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
where customid = p_custid
and carrid in s_carrid
order by primary key.
select * from spfli into table connections
for all entries in bookings
where carrid = bookings-carrid
and connid = bookings-connid
order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = p_form
variant = ' '
direct_call = ' '
importing fm_name = fm_name
exceptions no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
Hope this resolves your query.
Reward all the helpful answers.
Regards
calling the generated function module
call function fm_name
exporting
archive_index =
archive_parameters =
control_parameters = cparam
mail_appl_obj =
mail_recipient =
mail_sender =
output_options = outop
user_settings = SPACE
bookings = bookings
customer = customer
connections = connections
importing
document_output_info =
job_output_info = tab_otf_data
job_output_options =
exceptions formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
************downloading the converted PDF data to your local PC*******
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
ENDIF. -
I have a problem in converting smartform output to pdf format.
Hi,
While converting the smartform output to pdf format.
It is showing this error.
otf end command // missing in otf data.
I have used this function.
Assigning the OTFDATA to OTF Structure table
CLEAR gt_otf.
gt_otf[] = gs_otfdata-otfdata[].
Convert the OTF DATA to SAP Script Text lines
CLEAR gt_pdf_tab.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = gv_bin_filesize
TABLES
otf = gt_otf
lines = gt_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Please help me in this regard. Thanks in advance.Hi ,
I am getting this exception "err_conv_not_possible"
CALL FUNCTION f_name " '/1BCDWB/SF00000092'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = st_control_parameters
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = st_output_options
USER_SETTINGS = 'X'
ZST_TEXTSYMBOLS = ZST_TEXTSYMBOLS
wa_kna1 = wa_kna1
wa_claim_header = wa_claim_header
IMPORTING
DOCUMENT_OUTPUT_INFO = st_document_output_info
JOB_OUTPUT_INFO = st_job_output_info
JOB_OUTPUT_OPTIONS = st_job_output_options
TABLES
IT_CLAIM_VERSION = IT_CLAIM_VERSION
IT_CLAIM_ITEM = IT_CLAIM_ITEM
IT_CLAIM_PARTNER = IT_CLAIM_PARTNER
IT_FINAL = IT_FINAL
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE = v_bin_filesize
TABLES
OTF = st_job_output_info-OTFDATA[]
DOCTAB_ARCHIVE = it_docs
LINES = it_lines
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
HERE when i tried to debug it i got SY-SUBRC = 1.
Please help me in this regard. Thanks in advance. -
Logo in Smartform output to pdf format is coming as Junk Character
Hi All,
I have a requirement to generate the Smartform output in PDF file. But when i am doing that i am getting the LOGO as Junk character in the PDF file. Can any one help me to resolve this issue?.
Thanks,
Muruganand.KYes check the spool and the output displayed correctly in the spool it means there is a problem when you convert OTF to PDF. Check that part of the code and try different options.
-
hi,
i want to know how to send po output as pdf to mail...Hi,
I hope the below link can help you.
E-mail PDF Subcon PO to vendor (ECC5.0)
Thanks,
Khushboo. -
Sending smartform output as PDF attachment, Error opening PDF attachment
Hi Experts,
I am using the code form the following link to send a smartform output as PDF attachment. I can able to see the message, but can not open PDF document.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/convertSmartformtoPDFformat&
The information should be on my smartform are some text, company logo and a barcode.
With all of these received error: "There was an error opening this document. The file is damaged and could not be repaired."
I tried different ways like only text, text with company logo, text with barcode. I got the following errors:
An unrecognized token 'Td0' was found
There was problem reading this document(16).
There was problem reading this document(111).
Does anyone have idea of these ? Your help is greatly appreciated.
Thank you,
Suryaplease see this code ... for sending the Email as PDF attach file,
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
reward points if it is usefull ....
Girish -
How to archive smartform output as PDF and store in External server
Hi,
I have requirement on archiving smartform output.
1.need to archive smartform output as PDF and need to store the PDF in FileNet server.
2.These iPDF need to link to SAP transaction FEBA_LOCKBOX at service for object level.
I know that it can possible through SAP ArchiveLink feature , also aware that i have to enable Archive and Archive print button in the smartform output.
If any body can give me some solutions it will be a great help.
Regards,
Ratheesh BSHi,
DATA: T_SSFCTRLOP TYPE SSFCTRLOP. "FOR SMART FORMS
DATA: T_SSFCRESCL TYPE SSFCRESCL.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'Smart Form Name'
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
T_SSFCTRLOP-NO_DIALOG = 'X'.
T_SSFCTRLOP-GETOTF = 'X'.
T_SSFCTRLOP-LANGU = 'E'.
CALL FUNCTION FM_NAME
EXPORTING
CONTROL_PARAMETERS = T_SSFCTRLOP
IMPORTING
JOB_OUTPUT_INFO = T_SSFCRESCL
TABLES
G_T_PERNR = G_T_PERNR. "(Internal Table).
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'HR_EFI_SHOW_PDF_FORM'
EXPORTING
TOP_EDGE = 10
LEFT_EDGE = 15
TABLES
OTF_TABLE = T_SSFCRESCL-OTFDATA. -
Convert spool (which is for smartform output) to PDF?
how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,hi,
use this instead
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZNAK_SMARTFORM_CORRESPONDENCE'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = func_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
printer-getotf = 'X'.
printer-no_dialog = 'X'.
CALL FUNCTION func_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = printer
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
validity = ls_smart-validity
lifnr = ls_smart-lifnr
name1 = ls_smart-name1
pstlz = ls_smart-pstlz
regio = ls_smart-regio
stras = ls_smart-stras
smtp_addr = ls_smart-smtp_addr
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = printer1
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = printer1-otfdata.
DATA gt_tline like TABLE OF tline occurs 0 with header line.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
bin_filesize = w_file
TABLES
otf = t_otf
doctab_archive = gt_docs
lines = gt_tline
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Error while converting smartform output to pdf
hi
while converting smartform output to pdf error occured otf data not founr.
regarding code is as follows:
otfitab = i_job_output_info-otfdata.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
bin_filesize = l_pdf_len
TABLES
otf = otfitab
doctab_archive = t_docs_tab
lines = pdfitab
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
rest all declarations are up to date.
thanks in advance..........Hi Mayank,
I am not sure if u know this already, we can convert the spool ouput to PDF
by using the program RSTXPDFT4.
Regards,
Vivek -
How to Convert spool which is for smartform output to PDF?
how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,<b>Procedure</b>
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
<b>Here is a sample code of program to perform the function.</b>
SAMPLE CODE
[code]*&---------------------------------------------------------------------*
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
cparam type ssfctrlop,
outop type ssfcompop,
fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
file_size TYPE i,
bin_filesize TYPE i,
FILE_NAME type string,
File_path type string,
FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
bookings type ty_bookings,
connections type ty_connections.
start-of-selection.
***************** suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
where customid = p_custid
and carrid in s_carrid
order by primary key.
select * from spfli into table connections
for all entries in bookings
where carrid = bookings-carrid
and connid = bookings-connid
order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = p_form
* variant = ' '
* direct_call = ' '
importing fm_name = fm_name
exceptions no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
* calling the generated function module
call function fm_name
exporting
* archive_index =
* archive_parameters =
control_parameters = cparam
* mail_appl_obj =
* mail_recipient =
* mail_sender =
output_options = outop
user_settings = SPACE
bookings = bookings
customer = customer
connections = connections
importing
* document_output_info =
job_output_info = tab_otf_data
* job_output_options =
exceptions formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
* error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
* BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILE_NAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* WITH_ENCODING =
* PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* NOT_SUPPORTED_BY_GUI = 3
* others = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*************downloading the converted PDF data to your local PC********
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
* FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
ENDIF.
[/code]
Thanks and Regards,
Pavankumar -
Convert the smartform output to PDF when giving print from vf31
Hi Gurus,
I am facing one problem.I developed the program to chnage smartform output to PDF file when giving invoice print from VF02/VF03.
The same functionality i want to appy when i am giving print for the invoice through VF31.
I put the break-point in the driver program.But it is not stopping there when i am giving print from VF31.
How can i do this one..
Please Help Me.
Thanks &Regards,
R.P.SastryWhich Program you are putting the Breakpoint?
-
Smartform Output To PDF And Send It As External Mail
Dear All,
I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file,it is giving error that FILE IS DAMAGED
So please suggest a solution.
Regards,
BhaveshREPORT ZTEST_PDF_MAIL.
Internal Table declarations
PARAMETERS : p_ebeln TYPE ekko-ebeln DEFAULT '4500000003'.
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
DATA:it_pdfdata TYPE TABLE OF tline.
DATA:it_pdf TYPE TABLE OF solisti1.
BREAK-POINT .
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCSF_MM_PO_ORIGINAL'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
P_EBELN = P_EBELN
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = 'XYZ'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF. -
Problems sending a PDF via mail
Hi !! I have a report, runs in background, which obtains some information from sap tables and then generates an ALV. As it is executed in background, the ALV creates an spool order. After this, I convert this spool into a PDF object . And then I need to send a mail to an specific user with some text in its body and this PDF as attach. If I don't attach the PDF, the mail is sent ok. The problem is when I try to attach the PDF.. Here is my code so anybody can help me please... REPORT zautorizaciones_spool . TABLES : usr02, agr_texts, agr_users, adr6, usr21, adrp, itcpo, tsp01. TYPE-POOLS : slis. DATA: BEGIN OF i_tabla OCCURS 0, agr_name LIKE agr_texts-agr_name, text LIKE agr_texts-text, uname LIKE agr_users-uname, name_text LIKE adrp-name_text, END OF i_tabla. * Spool IDs TYPES: BEGIN OF t_tbtcp. INCLUDE STRUCTURE tbtcp. TYPES: END OF t_tbtcp. DATA: fieldcat TYPE slis_t_fieldcat_alv, fieldcat_ln LIKE LINE OF fieldcat, sortcat TYPE slis_t_sortinfo_alv. DATA: col_pos TYPE i, spos TYPE i. DATA: v_buffer TYPE string. DATA: BEGIN OF it_email OCCURS 0, smtp_addr LIKE adr6-smtp_addr. DATA: END OF it_email. DATA: mi_rqident LIKE tsp01-rqident, mi_bytecount TYPE i, mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE. DATA: it_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE, objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE, objhead LIKE solisti1 OCCURS 0 WITH HEADER LINE, objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE, objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE, doc_chng LIKE sodocchgi1, tab_lines LIKE sy-tabix, reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE, it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE. DATA: gd_eventid LIKE tbtcm-eventid, gd_eventparm LIKE tbtcm-eventparm, gd_external_program_active LIKE tbtcm-xpgactive, gd_jobcount LIKE tbtcm-jobcount, gd_jobname LIKE tbtcm-jobname, gd_stepcount LIKE tbtcm-stepcount, it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0, wa_tbtcp TYPE t_tbtcp. CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV'. *----
Pantalla de selección *----------------------------------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001. SELECT-OPTIONS: s_ustyp FOR usr02-ustyp, s_nomrol FOR agr_texts-agr_name, s_uflag FOR usr02-uflag, s_class FOR usr02-class, s_line FOR agr_texts-line, s_todat FOR agr_users-to_dat, s_spras FOR agr_texts-spras, s_gltgb FOR usr02-gltgb, s_correo FOR adr6-smtp_addr. SELECTION-SCREEN END OF BLOCK b1. *----
INITIALIZATION *----------------------------------------------------------------------
INITIALIZATION. CLEAR i_tabla. REFRESH i_tabla. *----
START-OF-SELECTION *----------------------------------------------------------------------
START-OF-SELECTION. PERFORM obtener_datos. IF NOT i_tabla[] IS INITIAL. IF sy-batch IS INITIAL. PERFORM listado. SKIP. WRITE:/ 'Para que la orden spool pueda ser creada, el programa', 'se debe de ejecutar en fondo.'. ELSE. MESSAGE s000(z2) WITH 'batch'. PERFORM listado. PERFORM get_job_details. PERFORM get_spool_number USING SY-REPID sy-uname CHANGING mi_rqident. PERFORM conver_spool_pdf. PERFORM enviar_mail. PERFORM delete_spool. IF sy-sysid = c_dev. WAIT UP TO 5 SECONDS. SUBMIT rsconn01 WITH mode = 'INT' WITH output = 'X' AND RETURN. ENDIF. ENDIF. ENDIF. *----
END-OF-SELECTION *---------------------------------------------------------------------
END-OF-SELECTION. *&----
*& Form obtener_datos *&--------------------------------------------------------------------
FORM obtener_datos. SELECT agr_textsagr_name agr_textstext agr_usersuname adrpname_text APPENDING CORRESPONDING FIELDS OF TABLE i_tabla FROM ( agr_users INNER JOIN usr02 ON usr02bname = agr_usersuname INNER JOIN agr_texts ON agr_textsagr_name = agr_usersagr_name INNER JOIN usr21 ON usr21bname = usr02bname INNER JOIN adrp ON adrppersnumber = usr21persnumber ) WHERE agr_usersagr_name IN s_nomrol AND agr_usersto_dat IN s_todat AND usr02class IN s_class AND usr02gltgb IN s_gltgb AND usr02uflag IN s_uflag AND usr02ustyp IN s_ustyp AND agr_textsline IN s_line AND agr_textsspras IN s_spras. ENDFORM *&--------------------------------------------------------------------
*& Form listado *&--------------------------------------------------------------------
FORM listado. PERFORM crear_catalogo. PERFORM imprimir. ENDFORM. *&--------------------------------------------------------------------
*& Form crear_catalogo *&--------------------------------------------------------------------
FORM crear_catalogo. PERFORM build_fieldcat USING : 'AGR_TEXTS' 'AGR_NAME' '' '' '' '30' '' 'L' 'Papel', 'AGR_TEXTS' 'TEXT' '' '' '' '80' '' 'L' 'Denominación papel', 'AGR_USERS' 'UNAME' '' '' '' '12' '' 'L' 'Usuario', 'NAME_TEXT' 'NAME_TEXT' '' '' '' '80' '' 'L' 'Nombre completo'. ENDFORM. *&--------------------------------------------------------------------
*& Form build_fieldcat *&--------------------------------------------------------------------
FORM build_fieldcat USING tabname fieldname key no_out hotspot outputlen do_sum ddictxt seltext_l. ADD 1 TO col_pos. fieldcat_ln-ref_tabname = tabname. fieldcat_ln-fieldname = fieldname. fieldcat_ln-key = key. fieldcat_ln-col_pos = col_pos. fieldcat_ln-no_out = no_out. fieldcat_ln-hotspot = hotspot. fieldcat_ln-do_sum = do_sum. fieldcat_ln-ddictxt = ddictxt. fieldcat_ln-seltext_l = seltext_l. fieldcat_ln-seltext_m = seltext_l. fieldcat_ln-seltext_s = seltext_l. IF NOT outputlen IS INITIAL. fieldcat_ln-outputlen = outputlen. ENDIF. APPEND fieldcat_ln TO fieldcat. CLEAR fieldcat_ln. ENDFORM. *&--------------------------------------------------------------------
*& Form imprimir *&--------------------------------------------------------------------
FORM imprimir. DATA : prg LIKE sy-repid. prg = sy-repid. DATA : salida TYPE slis_exit_by_user. CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' EXPORTING i_callback_program = prg i_callback_user_command = 'ALV_USER_COMMAND' it_fieldcat = fieldcat it_sort = sortcat i_save = 'A' IMPORTING es_exit_caused_by_user = salida TABLES t_outtab = i_tabla EXCEPTIONS program_error = 1 OTHERS = 2. ENDFORM. *&--------------------------------------------------------------------
*& Form informar_cuerpo *&--------------------------------------------------------------------
FORM informar_cuerpo. objtxt-line = 'Estimado propietario de datos.'. APPEND objtxt. CLEAR objtxt. APPEND objtxt. CLEAR objtxt. CONCATENATE 'En el marco de la auditoría SOX, y para asegurar el cumplimiento' 'de uno de sus controles, le adjuntamos un/os informes para...' INTO objtxt-line SEPARATED BY space. APPEND objtxt. CLEAR objtxt. ENDFORM. " informar_cuerpo *&--------------------------------------------------------------------
*& Form enviar_mail *&--------------------------------------------------------------------
FORM enviar_mail. DATA: w_cnt TYPE i, t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE, cont type i. doc_chng-obj_name = 'Probando envio mail'. doc_chng-obj_descr = 'Probando asunto mail'. PERFORM informar_cuerpo. READ TABLE it_mess_att INDEX w_cnt. MESSAGE s000(z2) WITH 'w_cnt' w_cnt. MESSAGE s000(z2) WITH 'sy-subrc' sy-subrc. DESCRIBE TABLE objtxt LINES tab_lines. doc_chng-doc_size = ( w_cnt - 1 ) * 255 + STRLEN( it_mess_att ). CLEAR t_attachment. REFRESH t_attachment. t_attachment[] = it_mess_att[]. CLEAR objpack-transf_bin. objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. objpack-doc_type = 'RAW'. objpack-obj_descr = doc_chng-obj_descr. DESCRIBE TABLE t_attachment LINES objpack-body_num. objpack-doc_type = 'PDF'. objpack-obj_descr = 'OBJ_Descr'. objpack-obj_name = 'obj_name'. objpack-doc_size = objpack-body_num * 255. APPEND objpack. objhead = 'Envio mail'. READ TABLE objtxt INDEX tab_lines. IF sy-subrc = 0. MESSAGE s000(z2) WITH 'objtxt' tab_lines. ENDIF. reclist-receiver = p_mail. reclist-rec_type = 'U'. reclist-express = 'X'. reclist-com_type = 'INT'. APPEND reclist. CLEAR reclist. CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' EXPORTING document_data = doc_chng TABLES packing_list = objpack object_header = objhead contents_bin = objbin contents_txt = objtxt receivers = reclist EXCEPTIONS too_many_receivers = 1 document_not_sent = 2 document_type_not_exist = 3 operation_no_authorization = 4 parameter_error = 5 x_error = 6 enqueue_error = 7 OTHERS = 8. MESSAGE s000(z2) WITH 'sy-subrc' sy-subrc. ENDFORM. " enviar_mail *&--------------------------------------------------------------------
*& Form get_spool_number *&--------------------------------------------------------------------
FORM get_spool_number USING f_repid f_uname CHANGING f_rqident. DATA: lc_rq2name LIKE tsp01-rq2name. CHECK NOT ( gd_jobname IS INITIAL ). CHECK NOT ( gd_jobcount IS INITIAL ). SELECT * FROM tbtcp INTO TABLE it_tbtcp WHERE jobname = gd_jobname AND jobcount = gd_jobcount AND stepcount = gd_stepcount AND listident <> '0000000000' ORDER BY jobname jobcount stepcount. CLEAR wa_tbtcp. READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1. IF sy-subrc = 0. f_rqident = wa_tbtcp-listident. MESSAGE s000(z2) WITH 'Se ha creado la orden spool' f_rqident. ELSE. MESSAGE s000(z2) WITH 'No se ha recuperado ninguna orden spool'. ENDIF. ENDFORM. " get_spool_number *&--------------------------------------------------------------------
*& Form informar_destinatario *&--------------------------------------------------------------------
FORM informar_destinatario USING p_correo. it_receivers-receiver = p_correo. it_receivers-rec_type = 'U'. it_receivers-express = 'X'. it_receivers-com_type = 'INT'. APPEND it_receivers. CLEAR it_receivers. ENDFORM. " informar_destinatario *&--------------------------------------------------------------------
*& Form get_job_details *&--------------------------------------------------------------------
FORM get_job_details. CALL FUNCTION 'GET_JOB_RUNTIME_INFO' IMPORTING eventid = gd_eventid eventparm = gd_eventparm external_program_active = gd_external_program_active jobcount = gd_jobcount jobname = gd_jobname stepcount = gd_stepcount EXCEPTIONS no_runtime_info = 1 OTHERS = 2. MESSAGE s000(z2) WITH 'job: ' gd_jobname. ENDFORM. " get_job_details *&--------------------------------------------------------------------
*& Form conver_spool_pdf *&--------------------------------------------------------------------
FORM conver_spool_pdf. CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' EXPORTING src_spoolid = mi_rqident no_dialog = ' ' dst_device = 'LOCL' IMPORTING pdf_bytecount = mi_bytecount TABLES pdf = mtab_pdf EXCEPTIONS err_no_abap_spooljob = 1 err_no_spooljob = 2 err_no_permission = 3 err_conv_not_possible = 4 err_bad_destdevice = 5 user_cancelled = 6 err_spoolerror = 7 err_temseerror = 8 err_btcjob_open_failed = 9 err_btcjob_submit_failed = 10 err_btcjob_close_failed = 11 OTHERS = 12. CHECK sy-subrc = 0. LOOP AT mtab_pdf. TRANSLATE mtab_pdf USING ' '. CONCATENATE v_buffer mtab_pdf INTO v_buffer. ENDLOOP. TRANSLATE v_buffer USING ' '. DO. it_mess_att = v_buffer. APPEND it_mess_att. SHIFT v_buffer LEFT BY 255 PLACES. IF v_buffer IS INITIAL. EXIT. ENDIF. ENDDO. ENDFORM. " conver_spool_pdf *&--------------------------------------------------------------------
*& Form delete_spool *&----
FORM delete_spool. DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char, ld_status LIKE sy-subrc. CLEAR: ld_spool_nr, ld_status. ld_spool_nr = mi_rqident. CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ' EXPORTING spoolid = ld_spool_nr IMPORTING status = ld_status. ENDFORM. " delete_spool I don't know where the error can be and I've been working on it for 2 days... Do I have to download the PDF to a file ??? In that case, how do I attach then the file ?? Thanks a lot in advance, Regards !!Sorry, I wrote it as the code appears in SAP and didn't know I can format it..I hope I've done it ok now..
As I run the report through a job, I do it like this:
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS no_runtime_info = 1
OTHERS = 2.
Then I get the spool:
DATA: lc_rq2name LIKE tsp01-rq2name.
SELECT * FROM tbtcp INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident '0000000000'
ORDER BY jobname jobcount stepcount.
CLEAR wa_tbtcp.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
f_rqident = wa_tbtcp-listident.
After this I create the PDF:
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = mi_rqident
no_dialog = ' '
dst_device = 'LOCL'
IMPORTING
pdf_bytecount = mi_bytecount
TABLES
pdf = mtab_pdf.
LOOP AT mtab_pdf.
TRANSLATE mtab_pdf USING ' ~'.
CONCATENATE
v_buffer
mtab_pdf
INTO v_buffer.
ENDLOOP.
TRANSLATE v_buffer USING '~ '.
DO.
it_mess_att = v_buffer.
APPEND it_mess_att.
SHIFT v_buffer LEFT BY 255 PLACES.
ENDDO.
To send the mail..
DATA: w_cnt TYPE i
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
cont type i.
doc_chng-obj_name = 'Probando envio mail'.
doc_chng-obj_descr = 'Probando asunto mail'.
READ TABLE it_mess_att INDEX w_cnt.
DESCRIBE TABLE objtxt LINES tab_lines.
doc_chng-doc_size = ( w_cnt - 1 ) * 255 + STRLEN( it_mess_att ).
CLEAR t_attachment.
REFRESH t_attachment. t_attachment[] = it_mess_att[].
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
objpack-obj_descr = doc_chng-obj_descr.
DESCRIBE TABLE t_attachment LINES objpack-body_num.
objpack-doc_type = 'PDF'.
objpack-obj_descr = 'OBJ_Descr'.
objpack-obj_name = 'obj_name'.
objpack-doc_size = objpack-body_num * 255.
APPEND objpack. objhead = 'Envio mail'.
READ TABLE objtxt INDEX tab_lines.
reclist-receiver = p_mail.
reclist-rec_type = 'U'.
reclist-express = 'X'.
reclist-com_type = 'INT'.
APPEND reclist.
CLEAR reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist .
Edited by: poketina on Nov 19, 2009 4:51 PM
Sorry, i don't know how to give format....
Maybe you are looking for
-
Blank TOC with a red "X" / Java errors
Everyone, I've been asked to troubleshoot a problem with a build, actually a series of builds in a WebHelp project, built in RH X5 on Windows XP. The project contains about 7 different builds, with conditional expressions (LOTS of them) in each one.
-
Language display on itunes and i can't read spanish to change it!!! help
this is my wifes computer and she put her old ipod on spanish. now have the computer but i away in hawaii at work and need to change my itunes page to english. i went to preferens and their is not even english spot. i can't read spanish but managed t
-
Viewing multiple calendars on an iPod
I successfully sync'd my iCal file that contains 7 calendars with an iPod Touch. When viewing them on that iPod, I found that I can view any ONE of those 7 calendars or see ALL of them at once, but nothing in between. Is there a way to choose and vie
-
Looking for good backgrounds to use with a green screen?
Any ideas where I can ding them?
-
Hi all, I have a method that I would like to run every 200ms from a JSP page. I figured this was more related to Java programming than JSP, so I'm posting here. Let me explain why. I have an application that captures a still image in the form of a by