Smartform output issue
Hi,
one of smartform output conatanis 10 customer address.
when i click on print button it will print first customer address.
when i click on second time it will print second customer address.
i want to get the print for all customers at a time.
where can i change the code means smartform or printprogram.
Regards,
Suresh
Hi Suresh
Go for below approach
1) Use below parameters of structure SSFCTRLOP
NO_OPEN, NO_CLOSE: These two flags prevent the print request from being closed after accepting the output of the Smart Form and allows you to include all other form output into this print request. The value should be like the following:
1st call:
NO_OPEN = SPACE.
NO_CLOSE = 'X'.
nth call:
NO_OPEN = 'X'.
NO_CLOSE = 'X'.
last call:
NO_OPEN = 'X'.
NO_CLOSE = SPACE
2.SSFCOMPOP: Structure for the output option.
TDNEWID: A flag indicating whether a new request is created.
4) Define one data wa_print_control referencing the structure SSFCTRLOP, and define another data variable wa_output_option referencing the structure SSFCOMPOP in the top include file of this report.
5) Clear the above two work areas before the print loop happens on the internal table that contains the selected invoice headers.
6) Initialize these two work areas with the values which would not change during the print loop as the following code fragment:
wa_print_control-no_dialog = ' '. u201DShow print setting dialog
wa_print_control-preview = 'X'. u201DEnable print preview
wa_output_option-TDNEWID = 'X'. u201CNew spool request.
7) In the loop at the internal table which holds the selected invoice headers, set blank value to of the field wa_print_control-NO_OPEN and set u2018Xu2019 to the field wa_print_control-NO_CLOSE for the first loop at the AT FIRST event because it will be the first call to the function module of the smartform. The code is bellow:
print_control-no_open = ' '.
print_control-no_close = 'X'.
8) Set blank value to the field wa_print_control-NO_CLOSE to close the spool request for the last loop at the AT LAST event.
wa_print_control-NO_CLOSE = u2018 u2018
9) Call the function module generated by the Form Design by passing the print control work area and output area.
Thanks
Lavanya
Similar Messages
-
Hello,
I want to convert smartform output to html and send the output in an email body. I have followed the blog Sending HTML Email from SAP CRM/ERP and got the output in outlook but its not formatted correctly in other email clients. If any body else had same issues and was able to resolve, please suggest. Also I am trying to convert form spool output to html and send it but I am not able to use LIST_FROM_MEMORY Fm , its not returning the abap list table. So is there a way to convert form spool output to abap list?HI friend,
I am not having the exact solution for your requirement but i think this will help you a bit.
See this white paper in SND for sending mails in HTML format.
Link: [Sending mail with HTML attachment|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e009f97e-ee5d-2e10-31ba-9c9509e5925c?QuickLink=index&overridelayout=true]
I think this will help you. If you have any doubt in that white paper please revert back to me i will help you.
Thanks,
Sri Hari -
Problem in displaying data in the smartform output.
Dear Freinds,
I have a requirement as per my requirement i have to display the employee dependents details in the smartform output.
I have taken a table in smartform and collected all teh employee dependents details . Each dependents his own details around 8 fields. so iam displaying in the smartform it is working till now no problem ........iam getting data as below
Dependentrelation | dependentname|passportno|expirydate|visano|visadate|visa expire date| ResidenceNo|Residence issuedate|
spouse | Raja |123456 |10/09/2009|122233|10/01/2009|10/01/2010 | 1001 |10/01/2009
These are the one of the dependentds details iam having till now , like this i have another dependts details. Now the problem i have
to add some fields to this list ( to this internal table) ...........if iam adding one more feild data is getting truncated as i dont have any more fields to add to right in the horizontal line........how can i solve this issue and how can i add further fields to this list
like date of birth of the dependents and gender
please could any one tell how i can solve this issue.
regards
divya.If this is a Tablethen only thing you can do is re-size the grid and font size to adjust your data. Like, displaying HEADINGS & DATAs in 2 rows instead of 1, etc.
Nothing else can be done. Otherwise you have to trim down the data to adjust in one page. -
Logo in Smartform output to pdf format is coming as Junk Character
Hi All,
I have a requirement to generate the Smartform output in PDF file. But when i am doing that i am getting the LOGO as Junk character in the PDF file. Can any one help me to resolve this issue?.
Thanks,
Muruganand.KYes check the spool and the output displayed correctly in the spool it means there is a problem when you convert OTF to PDF. Check that part of the code and try different options.
-
Text and table structure getting jumbled up in the smartform output
Hi all ,
While viewing the print preview of a smartform output , i am facing a strange issue.
The hardcoded text is getting jumbled up .For eg:"As soon as possible" becomes " as possible . soon as"
The structure of the table is also getting reversed.That is the table is now getting displayed with the last couloum first.The data in the table is also coming in the reverse order.
While executing the smartform directly , the layout is coming in the proper order.But while executing this through a transaction (FINT) , this issue is coming up.The print program is a standard program.
I have tried deleting the window , copying it to a new smartform etc.I have also tried in different systems to check whether if it is an issue with the system.
If anyone has faced a similar issue , please let me know how to solve it.Thanks a lot in advance.
Regards,
RashmiHi
Please check the Printout rather the print Preview. and also check the Structure/table entries also that u printing and also if u r using template, then check the assignment 1 of 1 , etc to the texts.
surya -
PDF Conversion of Smartform Output
Hi All,
Requirement : Be able to provide customers with reprinting old invoices.
As Is : We have a standard way of doing it by reissuing a print of the Invoice by going into transaction VF02. But in doing so we have a chance that if some master data changes for that customer or the material those changes will get reflected in the new smartform output.
To Be : We want to be able to exactly reproduce the invoice which was sent out at the time of invoice creation, what I mean to say is on initial issue of the print output, is there any way we can store that output(may be as raw data) and retrieve it and issue a print at a later stage.
Any help in this regard would be greatly appreciated.
Karthikhi
check this link...it will help you
https://www.sdn.sap.com/irj/scn/advancedsearch?query=sendalvtomailas+pdf&cat=sdn_all
or
REPORT zsuresh_test.
Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
W_bin_filesize TYPE i, " Binary File Size
w_FILE_NAME type string,
w_File_path type string,
w_FULL_PATH type string.
Internal tables declaration
Internal table to hold the OTF data
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data recd from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
This function module call is used to retrieve the name of the Function
module generated when the SMARTFORM is activated
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Calling the SMARTFORM using the function module retrieved above
GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
format of the output
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
Printer name to be used is provided in the export parameter
OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
CALL FUNCTION w_fmodule
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = w_cparam
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = w_outoptions
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_otf[] = t_otf_from_fm-otfdata[].
Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = T_pdf_tab
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Ansumesh -
Writing smartform output into application server.
Hi,
i have a smartform output having logo and other details. After this i am converting the smartform output to PDF file and i tried write into application server using Open Dataset, Close Dataset. The thing is i am unable to see the output in pdf file and when i tried to open am getting some error. Is there any way to write pdf file which having logo into application server.
i tried for both binary mode as well as for text mode of open dataset.
please guide me.Hi Subas.
I would like to suggest a couple of references,
[SDN - Reference for Issue regarding the uploading the pdf file to the application server|regarding the uploading the pdf file to the application server;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave -
Smartform output : Articles are getting disorder
Hi all,
In the smartform output the articles are displaying disorder, i want to display the articles as ascending order kindly help me on this issue..
Eg: vf03>billingdocument>issueoutput>select output type-->click on print preview is getting output, in this outptu articles are not getting ascending order.
Regards
SuniHi Suni,
Take the function module, which is generated after executing the smartform and add L and F01 to that. Suppose ur function module is
/1BCDWB/SF00000161
like this
/1BCDWB/LSF00000161F01
u add and open it in SE38, then it will act as a include program, then you can put break point where ever is required. Hope this helps u.
Regards,
Chandu.
Edited by: chandra sekhar narra on Oct 27, 2010 9:29 AM -
How to enable save and archieve button in smartform output?
How to enable save and archieve button in smartform output?
Hi,
While populating your output parameters, use parameter TDARMOD (Print Archieve Mode: 1,2 3).
Hope this will hint you how to resolve the issue.
BR,
Vinit -
To send smartform output through email and fax
Hi,
I need to send smartform output through email if the email address is present else if the email address is present then it has to be sent through fax.If both the email address and fax are present,then it has to send an email.
Now the issue is I am able to send the email and I am getting the message as 'Output was successfully issued'.But the entry corresponding to this is not shown in SOST transaction.
Can anyone tell me what would be the reason for this?HI,
Try to look in transaction SCOT
Regards,
Egle -
Sending smartform output to external email id
here the issue is ,,'
in pa40..m
after changing the start date of pernr ...
if i click on save button i have to generate one smartform based on the pernr and bedga ..
after i have to send that smartform output to external email id dynamically ..
please help me in this...
Moderator message: please search for available information/documentation before asking, your posts are pain to read, use normal punctuation, capitalization, do not open multiple threads for the same issue.
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Nov 10, 2010 1:56 PMHi Swati,
Try to maintain an auto-forwarding email address for this user using transaction SO36 and check if that solves your problem.
Regards,
Jigar -
Deadline Notifications - Change Smartform output to simple text
Hi Gurus,
SRM 7.0. Deadline notifications are configured for Process Controlled WF and are being generated. However these are generated as Smartform output and when forwarded to Outlook/Lotus Notes email accounts, they come through as a bunch of special characters. Is there any way to generate the notifications as simple text?
Thanks,
RM.Vipin,
What encoding settings are you referring to?
I assume you are referring to the BAdI - BBP_OUTPUT_CHANGE_SF. I did implement it for changing mail/notification subject. Even that change is not coming through. And I am not sure which parameter can be set to change the output format.
I have no issues with the offline approval mail.
Thanks,
RM.
Resolved on my own by debugging. cs_parameters-mail_format should be set to blank (BAdI implementation - BBP_OUTPUT_CHANGE_SF).
Edited by: Ramki Maley on Nov 24, 2010 4:05 PM -
Smartforms output as HTML in email
Hi,
I want to send the output of a smartform as html in email body.
I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
I did everything as per the blog.
However I am getting the email as:
sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
When I display the document using SOST, I get the output as
Address bar has this: C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
and window contains:
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
Regards,
Reema
Message was edited by:
Reema Shahbazkar
In case anyone needs to have a look at my code:
REPORT ZSMARTFORM_2_HTML_EMAIL.
get generated function module for the smartform
DATA: FM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSF_SAMPLE_HTML'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
get smartform contetnt
set smartform output options
data:
control_parameters type SSFCTRLOP,
OUTPUT_OPTIONS TYPE SSFCOMPOP,
DOCUMENT_OUTPUT_INFO TYPE SSFCRESPD,
JOB_OUTPUT_INFO TYPE SSFCRESCL,
JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
XSFPARAM_LINE TYPE SSFXSFP,
P_HTML TYPE TRFRESULT,
P_GRAPHICS TYPE TSF_XSF_GR,
WA_RETURN TYPE BAPIRET2.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
control_parameters-NO_DIALOG = 'X'.
*control_parameters-GETOTF = 'X'.
OUTPUT_OPTIONS-TDNEWID = SPACE.
OUTPUT_OPTIONS-TDIMMED = SPACE.
OUTPUT_OPTIONS-XSFCMODE = 'X'. "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
OUTPUT_OPTIONS-XSF = 'X'. "XSF OUTPUT ACTIVATED
OUTPUT_OPTIONS-XSFOUTMODE = 'A'. "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
CLEAR: OUTPUT_OPTIONS-XSFOUTDEV. "OUTPUT SPOOL DEVICE
OUTPUT_OPTIONS-XSFFORMAT = 'X'. "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
XSFPARAM_LINE-NAME = 'GRAPHICS'.
XSFPARAM_LINE-VALUE = 'EXTRACT'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'CONTENT-ID'.
XSFPARAM_LINE-VALUE = 'ENABLE'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = OUTPUT_OPTIONS
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
JOB_OUTPUT_INFO = JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
PROCEED TO SEND EMAIL
DATA: HTML_DATA TYPE TRFRESULT,
L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
HTML_XSTR TYPE XSTRING.
CLEAR: HTML_XSTR.
LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
SPECIAL CHARACTER CONVERSION
DATA: HTML_STR TYPE STRING,
HTML_LEN TYPE I.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
INBUFF = HTML_XSTR
INBUFFLG = 0
INCODE = '4110' "utf-8
OUTBUFFLG = 0
OUTCODE = '0000'
CSUBST = 'X'
SUBSTC_HASH = ' '
SUBSTC_DOT = ' '
SUBSTC_SPACE = 'x'
SUBSTC = '00035'
IMPORTING
INUSED =
OUTBUFF = HTML_STR
OUTOVERFLOW =
OUTUSED = HTML_LEN
SUBSTED =
INPUT_ENDS_IN_CHAR =
ERRMSG =
EXCEPTIONS
INVALID_CODEPAGE = 1
INTERNAL_ERROR = 2
CANNOT_CONVERT = 3
FIELDS_BAD_TYPE = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
HTML_LEN = STRLEN( HTML_STR ).
DATA: L_OFFSET TYPE I,
L_LENGTH TYPE I,
L_DIFF TYPE I,
LT_SOLI TYPE SOLI_TAB,
LS_SOLI TYPE SOLI.
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
CREATE OBJECT LO_MIME_HELPER
EXPORTING
CODEPAGE = '1133'.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
CONTENT = LT_SOLI
FILENAME =
DESCRIPTION =
HANDLE GRAPHICS
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
GR_XSTR TYPE XSTRING,
L_GR_RAW TYPE BAPICONTEN,
L_CONTENT_ID TYPE STRING,
L_CONTENT_TYPE TYPE W3CONTTYPE,
L_OBJ_LEN TYPE SO_OBJ_LEN,
L_FILENAME TYPE STRING,
LT_SOLIX TYPE SOLIX_TAB,
LS_SOLIX TYPE SOLIX.
LOOP AT P_GRAPHICS INTO L_GRAPHIC.
CLEAR: GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLIX TO LT_SOLIX.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
ADD IMAGES TO EMAIL
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
EXPORTING
CONTENT = LT_SOLIX
FILENAME =
EXTENSION =
DESCRIPTION =
CONTENT_TYPE = L_CONTENT_TYPE
LENGTH = L_OBJ_LEN
CONTENT_ID = L_CONTENT_ID
ENDLOOP.
DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
P_SUBJECT TYPE SO_OBJ_DES,
LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
TRY.
CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
EXPORTING
I_SUBJECT = P_SUBJECT
I_LANGUAGE = SY-LANGU
I_IMPORTANCE = '5'
I_SENSITIVITY = 'F'
I_MULTIREL_SERVICE = LO_MIME_HELPER
RECEIVING
RESULT = LO_DOC_BCS
CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
CATCH CX_GBT_MIME INTO LV_GBT_MIME.
ENDTRY.
RECEIVERS
DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
RECEIVER TYPE SOMLRECI1,
L_MAIL_ADDRESS TYPE AD_SMTPADR,
LO_BCS TYPE REF TO CL_BCS,
LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
L_USERNAME TYPE UNAME,
SEND_PARTNER TYPE BU_PARTNER,
LI_SENDER TYPE REF TO IF_SENDER_BCS,
LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
LV_SENT_TO_ALL TYPE BOOLEAN.
CLEAR RECEIVER.
RECEIVER-RECEIVER = '[email protected]'.
RECEIVER-REC_TYPE = 'U'.
RECEIVER-COM_TYPE = 'INT'.
APPEND RECEIVER TO P_RECEIVERS.
L_USERNAME = SY-UNAME.
CLEAR RECEIVER.
LOOP AT P_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
TRY.
CALL METHOD CL_BCS=>CREATE_PERSISTENT
RECEIVING
RESULT = LO_BCS
CALL METHOD LO_BCS->SET_DOCUMENT
EXPORTING
I_DOCUMENT = LO_DOC_BCS
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'.
L_USERNAME = SEND_PARTNER.
TRANSLATE L_USERNAME TO UPPER CASE.
LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
L_FROM_MAIL_ADDRESS = L_USERNAME.
LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
EXPORTING
I_SENDER = LI_SENDER
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
create recepient
data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
TRY.
CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
EXPORTING
I_ADDRESS_STRING = L_MAIL_ADDRESS
I_ADDRESS_NAME =
I_INCL_SAPUSER =
RECEIVING
RESULT = LO_RECEPIENT
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ENDTRY.
TRY.
CALL METHOD LO_BCS->ADD_RECIPIENT
EXPORTING
I_RECIPIENT = LO_RECEPIENT
I_EXPRESS =
I_COPY =
I_BLIND_COPY =
I_NO_FORWARD =
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
SEND EMAIL DOCUMENT
TRY.
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
I_REQUESTED_STATUS = 'N'
TRY.
CALL METHOD LO_BCS->SEND
EXPORTING
I_WITH_ERROR_SCREEN = SPACE
RECEIVING
RESULT = LV_SENT_TO_ALL
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
ENDTRY.
ENDLOOP.
COMMIT WORK.Hi,
I want to send the output of a smartform as html in email body.
I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
I did everything as per the blog.
However I am getting the email as:
sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
When I display the document using SOST, I get the output as
Address bar has this: C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
and window contains:
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
Regards,
Reema
Message was edited by:
Reema Shahbazkar
In case anyone needs to have a look at my code:
REPORT ZSMARTFORM_2_HTML_EMAIL.
get generated function module for the smartform
DATA: FM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSF_SAMPLE_HTML'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
get smartform contetnt
set smartform output options
data:
control_parameters type SSFCTRLOP,
OUTPUT_OPTIONS TYPE SSFCOMPOP,
DOCUMENT_OUTPUT_INFO TYPE SSFCRESPD,
JOB_OUTPUT_INFO TYPE SSFCRESCL,
JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
XSFPARAM_LINE TYPE SSFXSFP,
P_HTML TYPE TRFRESULT,
P_GRAPHICS TYPE TSF_XSF_GR,
WA_RETURN TYPE BAPIRET2.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
control_parameters-NO_DIALOG = 'X'.
*control_parameters-GETOTF = 'X'.
OUTPUT_OPTIONS-TDNEWID = SPACE.
OUTPUT_OPTIONS-TDIMMED = SPACE.
OUTPUT_OPTIONS-XSFCMODE = 'X'. "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
OUTPUT_OPTIONS-XSF = 'X'. "XSF OUTPUT ACTIVATED
OUTPUT_OPTIONS-XSFOUTMODE = 'A'. "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
CLEAR: OUTPUT_OPTIONS-XSFOUTDEV. "OUTPUT SPOOL DEVICE
OUTPUT_OPTIONS-XSFFORMAT = 'X'. "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
XSFPARAM_LINE-NAME = 'GRAPHICS'.
XSFPARAM_LINE-VALUE = 'EXTRACT'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'CONTENT-ID'.
XSFPARAM_LINE-VALUE = 'ENABLE'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = OUTPUT_OPTIONS
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
JOB_OUTPUT_INFO = JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
PROCEED TO SEND EMAIL
DATA: HTML_DATA TYPE TRFRESULT,
L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
HTML_XSTR TYPE XSTRING.
CLEAR: HTML_XSTR.
LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
SPECIAL CHARACTER CONVERSION
DATA: HTML_STR TYPE STRING,
HTML_LEN TYPE I.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
INBUFF = HTML_XSTR
INBUFFLG = 0
INCODE = '4110' "utf-8
OUTBUFFLG = 0
OUTCODE = '0000'
CSUBST = 'X'
SUBSTC_HASH = ' '
SUBSTC_DOT = ' '
SUBSTC_SPACE = 'x'
SUBSTC = '00035'
IMPORTING
INUSED =
OUTBUFF = HTML_STR
OUTOVERFLOW =
OUTUSED = HTML_LEN
SUBSTED =
INPUT_ENDS_IN_CHAR =
ERRMSG =
EXCEPTIONS
INVALID_CODEPAGE = 1
INTERNAL_ERROR = 2
CANNOT_CONVERT = 3
FIELDS_BAD_TYPE = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
HTML_LEN = STRLEN( HTML_STR ).
DATA: L_OFFSET TYPE I,
L_LENGTH TYPE I,
L_DIFF TYPE I,
LT_SOLI TYPE SOLI_TAB,
LS_SOLI TYPE SOLI.
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
CREATE OBJECT LO_MIME_HELPER
EXPORTING
CODEPAGE = '1133'.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
CONTENT = LT_SOLI
FILENAME =
DESCRIPTION =
HANDLE GRAPHICS
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
GR_XSTR TYPE XSTRING,
L_GR_RAW TYPE BAPICONTEN,
L_CONTENT_ID TYPE STRING,
L_CONTENT_TYPE TYPE W3CONTTYPE,
L_OBJ_LEN TYPE SO_OBJ_LEN,
L_FILENAME TYPE STRING,
LT_SOLIX TYPE SOLIX_TAB,
LS_SOLIX TYPE SOLIX.
LOOP AT P_GRAPHICS INTO L_GRAPHIC.
CLEAR: GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLIX TO LT_SOLIX.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
ADD IMAGES TO EMAIL
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
EXPORTING
CONTENT = LT_SOLIX
FILENAME =
EXTENSION =
DESCRIPTION =
CONTENT_TYPE = L_CONTENT_TYPE
LENGTH = L_OBJ_LEN
CONTENT_ID = L_CONTENT_ID
ENDLOOP.
DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
P_SUBJECT TYPE SO_OBJ_DES,
LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
TRY.
CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
EXPORTING
I_SUBJECT = P_SUBJECT
I_LANGUAGE = SY-LANGU
I_IMPORTANCE = '5'
I_SENSITIVITY = 'F'
I_MULTIREL_SERVICE = LO_MIME_HELPER
RECEIVING
RESULT = LO_DOC_BCS
CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
CATCH CX_GBT_MIME INTO LV_GBT_MIME.
ENDTRY.
RECEIVERS
DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
RECEIVER TYPE SOMLRECI1,
L_MAIL_ADDRESS TYPE AD_SMTPADR,
LO_BCS TYPE REF TO CL_BCS,
LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
L_USERNAME TYPE UNAME,
SEND_PARTNER TYPE BU_PARTNER,
LI_SENDER TYPE REF TO IF_SENDER_BCS,
LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
LV_SENT_TO_ALL TYPE BOOLEAN.
CLEAR RECEIVER.
RECEIVER-RECEIVER = '[email protected]'.
RECEIVER-REC_TYPE = 'U'.
RECEIVER-COM_TYPE = 'INT'.
APPEND RECEIVER TO P_RECEIVERS.
L_USERNAME = SY-UNAME.
CLEAR RECEIVER.
LOOP AT P_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
TRY.
CALL METHOD CL_BCS=>CREATE_PERSISTENT
RECEIVING
RESULT = LO_BCS
CALL METHOD LO_BCS->SET_DOCUMENT
EXPORTING
I_DOCUMENT = LO_DOC_BCS
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'.
L_USERNAME = SEND_PARTNER.
TRANSLATE L_USERNAME TO UPPER CASE.
LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
L_FROM_MAIL_ADDRESS = L_USERNAME.
LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
EXPORTING
I_SENDER = LI_SENDER
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
create recepient
data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
TRY.
CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
EXPORTING
I_ADDRESS_STRING = L_MAIL_ADDRESS
I_ADDRESS_NAME =
I_INCL_SAPUSER =
RECEIVING
RESULT = LO_RECEPIENT
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ENDTRY.
TRY.
CALL METHOD LO_BCS->ADD_RECIPIENT
EXPORTING
I_RECIPIENT = LO_RECEPIENT
I_EXPRESS =
I_COPY =
I_BLIND_COPY =
I_NO_FORWARD =
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
SEND EMAIL DOCUMENT
TRY.
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
I_REQUESTED_STATUS = 'N'
TRY.
CALL METHOD LO_BCS->SEND
EXPORTING
I_WITH_ERROR_SCREEN = SPACE
RECEIVING
RESULT = LV_SENT_TO_ALL
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
ENDTRY.
ENDLOOP.
COMMIT WORK. -
Convert smartform output in to PDF using CONVERT_OTF function how to do it
Hi Anil , and Hi All
I am trying to display smartforms output in java webdynpro
for that i have got the following code in sdn.
can anybody please clarify these doubts in the below code
1) What are the mandatory input and output parameters
I have to pass here in this code to my application
2) please check my previous post also in this regards please
. Please reply at the very earliest. Check the below code
Convert smartform output in to PDF using CONVERT_OTF function module and you can write pdf using parameter 'binfile' of this function in WebDynpro using the following code:
It is copied from my prg. I hope you understand it.
public void onActionGetQuote(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionGetQuote(ServerEvent)
wdThis.wdGetOppt_QwriterCustController().executeZquote_Writer_Input();
String fileName = wdContext.currentZquote_Writer_InputElement().getOrder().toString().trim() + System.currentTimeMillis() + ".pdf";
String pdfOutput = new String(wdContext.currentOutputElement().getBinfile());
if (pdfOutput != null)
try
String pdfResoucePath = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(), fileName);
FileOutputStream fileOutputStream = new FileOutputStream(new File(pdfResoucePath));
PrintStream ps = new PrintStream(fileOutputStream);
ps.print(pdfOutput);
ps.close();
//Display the PDF to the browser
String fileURL = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(), fileName);
IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(fileURL, "Pdf Browser", false);
window.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
window.removeWindowFeature(WDWindowFeature.MENU_BAR);
window.removeWindowFeature(WDWindowFeature.STATUS_BAR);
window.removeWindowFeature(WDWindowFeature.TOOL_BAR);
window.open();
// To collect all the file created in the server by user
quoteFiles.add(quoteFiles.size(), pdfResoucePath);
} catch (Exception e)
throw new WDRuntimeException(e);
//@@endHi
ABAPers prepared a BAPI function module which calls Smart form , how can i execute it from java Webdynpro, so that I can display the smart form in Webdynpro. Pleas reply at the very earliest. Every answer will be rewarded.
regards
jalandhar -
Smartforms output in Duplex mode
Hello Gems,
I have defined 3 pages and i had set all the pages to duplex mode.
I need to print set of instructions in my smartform output in duplex mode (front & back of page)
Page1 : next window is Page 2 and i have a command to print Instructions (page INST)
Page2 : next window is blank(or page 2) and i have a command to print conditions (page INST)
Page INST : Does not has main window and next page is Page 2.
My pages flow in the following way:
page1>Page INST>Page2
Page 1 & 2 have main windows.
I need to see the INSTRUCTONS on every page that is printed with data. But i am getting an extra page that is blank
with no INSTRUCTIONS at the back.
when i print, i am 1st page properly but also getting an xtra blank page with no INSTRUCTIONS on the back.
Can some one suggest me ?
Thanks
DanHi,
Define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.
For more details please refer to the below limk
http://help.sap.com/saphelp_nw70/helpdata/en/d1/802e77454211d189710000e8322d00/frameset.htm
Thank U,
Jay....
Maybe you are looking for
-
My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?
-
OCSP in DSS seems to be invalid and may crash Acrobat
Hi there! I'm currently facing some problems when we try to add a DSS to a timestamped document. Afterwards the timestamp is not marked as LTV in Acrobat and if we try to re-add the verification data via Acrobat it crashes. You can find the document
-
I am trying to help my friend to enable dictation for ipad mini, when go to setting-general-keyboard-enable dictation is not in her ipad mini, why? It is on my ipad mini. The speaker is not there when she open the keyboard on her ipad mini. She wants
-
Does SAP PO support time skew?
Hello Experts, While using AXIS adapter, WS-Security header can be configured for actions UsernameToken and Timestamp. Timestamp format is like: <wsu:Timestamp wsu:Id="TS-889"> <wsu:Created>2014-06-10T05:38:20.179Z</wsu:Created> <wsu:Expire
-
Another iTouch Internet Problem
I can connect to the Internet somewhat, but my iTouch doesn't complete the connection to its close. The URL indicator opens to the website but halts about 1/2 to 3/4 of the way. The "circle thingy" goes around & around as though it's working, but the