Smartform Priniting in F-58
Hi,
Standard uses SapScript to print F-58 form. I want to replace it with my smartform. Can anyone help out how to do it?
Thanks,
Usman Malik
Dear,
Usually you need not to deduct TDS at the time of F-58 because TDS on invoice must have been deducted.
If you still want this then make sure when you create invoice for vendor in F-43 and when system gives you pop up, you must enter payment withholding tax type and tax code which will deduct TDS at the time of F-58.
Regards,
Chintan Joshi
Similar Messages
-
* is coming while priniting smartform of multiple pages for a customer
Hi Experts,
I m priniting the smartform for the Customer statement and i m using SFSY-PAGE and SFSY-FORMPAGES for the page number and for total number for pages. There am facing the problem of * in SFSY-FORMPAGES..
If the total no of pages is single digit like 8 or 7 it is printing page 1 of 8 etc, but if it is double digit in the sense like 11, it is printing Page 1 of * Page 2 of * and Page 10 of 11.... I have used the Z and C in the variables in Smartform...
Please help me to solve thisHi,
Refer Question Why SFSY-FORMPAGES is output as a star "" instead of the total number of pages?* from the below link
http://wiki.sdn.sap.com/wiki/display/ABAP/SmartFormsFAQ#SmartFormsFAQ-WhySFSYFORMPAGESisoutputasastar%22%22insteadofthetotalnumberofpages%3F
Thanks,
Pawan -
Changing script to smartforms fro chk priniting
Hi ,
I have to do a check priniting using the F110 transaction.
We were previously using a Script but then as per one requireemnt where in the number was to displayed in a white colour in a black box ;as this functionality cannot be acheived using the script, I was think whether we can use a smartform and assign it the corresponding print program.and use it in the F110 transaction.
Thanks and regards,
Avi.Hai Avinash
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING MODE = 'BATCH'
REPORT = 'MYREPORT'
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
look into this link
http://help.sap.com/saphelp_nw04/helpdata/en/d5/6243ea8a4111d4b605006094192fe3/content.htm
You need to set the USER_SETTINGS perameter in your SmartForm to SPACE
Thanks & Regards
Sreenivasulu P -
How to avoid blank lines in smartforms?
Hi all,
I am using an INCLUDE TEXT in a smartform. The problem is it is priniting with the blank lines entered in the standard text.
I couldn't find any option for avoiding these blank lines using the respective smartstyles.
Is there any option to avoid the blank lines ? Please help me.
Thanks,
AravindHi,
well if the blank lines are present in the include text.
then you have to modify the standard text.
in the smartform the text is printed as it is.
you need to make changes to the standard text. -
Prinitng smartform tables in full sheet
Dear All Gurus,
This is my request. I need to print a customized smartform (ex :GRN) according to below.
Format of Smartform(1 page Smartform) :
Header Windows (Adress / LOGO)
Table Data
Footer window (signatuees / agreement texts)
(If the smartform prints 3 sheets (due to a lot of rows in the table) -
1st sheet should show the header windows & table
2nd sheet will carry out printing rest of the table data without priniting Header window (The total page space should be taken by table)
3rd sheet will print the last rows of table & footer windows )
I have designed the smartform & prints pages as above. But I cant figure out the way to expand the size of the table in the 2nd page to print it in full page.
Plz Help
Thanks'HI,
Thank you for the reply..
Kindly note that this smartform is 01 page smartform. (I have designed everything in single page.)
Header Windows (Adress / LOGO)
Main window (Table Data )
Bottom window (signatuees / agreement )
What happens here is if the table has 5 rows of Data, it is printed perfectly in a single A4 sheet according to my requirement because space is enough to print everything.
But if there are 500 rows of Data in the table, what needs to be done is from 2nd A4 sheet onwards the table should acquire the total space of the sheet (including space given to LOGO, Address windows & bottom windows) until the loop ends.
How do I get the total space because the table doesnt expand the size in main window of the smartform.
Can we get that by expanding main window in 2nd page as you said?
Thanks -
Smartforms - SD order confirmation (urgent)
Hi,
I am customizing the SD order confirmation smartform SMB40/SDORC_L. I need the following changes to make:
1. In sold-to-party & ship-to-party window there is "Company" prinited. How can I remove this "Company".
2. What is the database table and field to get the ship-to-number.
3. how to add terms-of-payment.
4. Need to add New account group = 'consignee' in Ship-to-party window.
5. how to print delivary date in words like(jun 1st 2006).
please try to respond to any of the above questions. full points assured even for single answer. thanksRaju,
1. As you are customizing the standard form, you need to remove the company text element that need to be removed.
2. Look at VBPA where all the partners for a give order are stored. You need to choose the right partner type for the Ship to party.
3. Look at the INCOTERMS field at the header level and item field of the sales order tables (VBAK / VBAP)
4. You need to change the window to add a text element where you have the text CONSIGNEE.
5. You will have to split the date and and write the date manually using a text element. Write program lines where in you can split the date and get whatever format you want.
Regards,
Ravi -
hi all
i am priniting a smartform with logo the problem is i a getting inverted logo where as verythn else id gd.
can anyone suggest me what is going wromg
regards
navjotHi
Check the same printing in another printer
because sometimes it will happen due to printer also.
So check and confirm it
and also check the resolution of the graphic technical settings and the output options in smartform
see the steps correctly
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) Use TCode SE78 to upload new pictures and logos.
look at Thread Dynamic Graph in smartforms
Refer the links also -
Re: Dinamic Graph in smartforms
How to get file perperties in Unix server
Reward points for useful Answers
Regards
Anji -
Equivalent program for SAPM07DR when i am using SMARTFORMS
Hi All.
Can any body please tell me what is the equvivalent program for SAPM07DR in samrt forms.
Background:
This is an upgradation from 46b to ECC 6.0. Using T-code MB03 we are now priniting the Goods accompanying document in SAP script. Now we want this to be developed in SmartForms the same existing program cannot be used for this.
Thank you inadvance.
Ishu.Hi,
I had the same problem in ECC6 ehp4, until i find this
http://sharrysleepinbest.spaces.live.com/blog/cns!3FDE61CC2C7B7068!137.entry
Pay attention to logo that cause a dump.
Regards.
F. -
Hi Gurus,
I know that lables can't be printed using smartforms.
So how do we mange if there is any requirement priniting lables with smartforms?
RegardsHi,
Do you want to print Barcode label printing in smartforms?
You can do it by creatting character format in smartstyles. & Create a text in smartfrom & asign the character format to that particular field.
Ashvender -
Filename in Webdynpro for a PDF created with Smartform
Hi,
I created a PDF with Smartform in my Webdynpro-Application.
When I click the save button there is a default filename f.pdf .
How can I change the filename?
Regards
Marcus SchugHi Experts,
any update on this?
I am facing the same problem with ESS payslip (smartform/Hrform): my customer wants to have custom file name for download salery statements from the portal. Do you know how to change the default form name unknown.pdf to e.g.. "payslip_month_year"?
I spent a lot of time to find any possibility to get and change the file name but without success till now.
Please respond.
Regards,
Zdzislaw Kaczmarczyk
Edited by: Zdzislaw Kaczmarczyk on Jun 14, 2010 4:41 PM -
Sy-tabix for internal table in smartform
Hi friends,
How to capture the sy-tabix value for the entries in an internal table which has been looped into the loop of table node of a smartform?? I need to print something immedaitely after the end of the table
For every record the value of sy-tabix is showing 1 !!
Advance Thanks
AadarshHi Aadarsh,
Give ur sy-tabix at the end of the loop.
loop at itab.
//table node populations.
endloop.
give a seperate loop for this.
loop at itab.
sy-tabix.
endloop
get the total no and print it after the table.
If u r using do loop then give sy-index.
Hope tihs helps u,
Regards,
Nagarajan.
Message was edited by: Nagarajan Kumarappan -
Dunning won't print to smartform
Hey all,
I've been trying to set up the Dunning process to print to the standard SAP dunning smartform (F150_DUNN_SF). Here's what I've done so far:
1. Used transaction BF31 to change the function module for dunning to FI_PRINT_DUNNING_NOTICE_SMARTF.
2. Used transaction SPRO under Financial Accounting->Accounts Receivable and Accounts Payable->Business Transactions->Dunning->Printout->Assign Dunning Forms to set the Form for our custon procedure for all 3 Dunning Levels to F150_DUNN_SF
3. I then run the dunning report out of transaction F150. The Dunning list shows that the customer should receive the letter.
When I try to print, the job terminates. When I check the job log in SM37, I get the following error: "Include text does not exist (object TEXT, ID )" (Message class SSFCOMPOSER, Message No. 610). Everything looks like it is set up correctly. Did I miss a step?
Thanks for your help!
~WilliamHi,
Seems that the smartform that you are using has a standard text which is not avaliable check the smartform for standard texts being used and check if they are all avaliable in SO10.
Regards,
Himanshu -
Smartforms: How 2 fire print & download 2 PDF simultaniously 4 my forms
Dear Murugesh, Cristian
The following is my piece of code which directly downloads my forms into PDF but not creating any spool 4 firing print ,
1) I need the both to happen simultaniously .
2) I need to include the o/p(either SAPScript/report o/p) as the Smartform pages with o/p of my Driver prog ,by calling another TCODE from my driver prog .
Please throw some light on this .
have a look into my code
*Printing of Export Invoice, Packing List,Enclosure to Packing List & *
*Case Marking in one SMART FORMS Layout *
REPORT ZSD_REP_MULTI_PRINT.
TABLES :
vbak,
vbap,
vbpa,
vbfa,
VBRK,
VBRP,
LIKP,
LIPS,
KONV,
objk,
tvko,
ser01,
sadr,
equi,
makt,
mast,
t005t,
kna1,
t001w,
T001,
ADRC,
sscrfields,
zpp_plcmi, "Packing list history For Conf: Item data
zplh, "PACKING LIST HISTORY : HEADER DATA
zpli. "PACKING LIST HISTORY : ITEM DATA
DATA: FM_NAME1 TYPE RS38L_FNAM,
FM_NAME2 TYPE RS38L_FNAM,
FM_NAME3 TYPE RS38L_FNAM,
FM_NAME4 TYPE RS38L_FNAM,
P_E_DEVTYPE TYPE RSPOPTYPE,
P_JOB_OUTPUT_INFO TYPE SSFCRESCL OCCURS 2000 WITH HEADER LINE,
T_OTF LIKE ITCOO OCCURS 0 WITH HEADER LINE,
P_OUTPUT_OPTIONS TYPE SSFCOMPOP OCCURS 0 WITH HEADER LINE,
P_CONTROL_PARAMETERS TYPE SSFCTRLOP OCCURS 0 WITH HEADER LINE ,
P_DOC LIKE DOCS OCCURS 2000 WITH HEADER LINE,
P_LINES LIKE TLINE OCCURS 200,
P_BIN_FILESIZE TYPE I,
P_LANGUAGE TYPE SFLANGU,
P_BIN_FILE TYPE XSTRING,
OK_CODE LIKE SY-UCOMM.
DATA: T_ITEM TYPE ZSD_TABL_LITEM,
WA_ITEM TYPE ZSD_STRUCT_LITEM,
T_ADRS LIKE ZSD_STRUCT_ADRS OCCURS 0 WITH HEADER LINE,
MSLINES LIKE TLINE OCCURS 1 WITH HEADER LINE,
TIDNO LIKE STXL-TDID,
TNAME LIKE STXL-TDNAME,
TOBJT LIKE STXL-TDOBJECT,
SSORD LIKE VBAK-VBELN,
TOT LIKE VBAK-NETWR,
WORD LIKE SPELL.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: P_DELNO LIKE LIKP-VBELN OBLIGATORY,
P_INVNO LIKE VBRK-VBELN OBLIGATORY,
P_DATE LIKE SY-DATUM.
SELECTION-SCREEN END OF BLOCK blk1.
AT SELECTION-SCREEN.
CLEAR T_ADRS.
REFRESH T_ITEM.
T_ADRS-INVNO = P_INVNO.
T_ADRS-INVDAT = P_DATE.
SELECT SINGLE VBELV INTO VBFA-VBELV
FROM VBFA
WHERE VBELN = P_DELNO
AND VBTYP_N = 'J' .
SSORD = VBFA-VBELV.
*Exporter's Address
SELECT SINGLE BUKRS_VF INTO VBAK-BUKRS_VF
FROM VBAK
WHERE VBELN = VBFA-VBELV.
SELECT SINGLE ADRNR
INTO T001-ADRNR
FROM T001
WHERE BUKRS = VBAK-BUKRS_VF.
SELECT SINGLE NAME1 STREET CITY1 POST_CODE1 COUNTRY
INTO (T_ADRS-NAME1,T_ADRS-STREET,T_ADRS-CITY1,
T_ADRS-POST_CODE1, ADRC-COUNTRY)
FROM ADRC
WHERE ADDRNUMBER EQ T001-ADRNR.
SELECT SINGLE LANDX
INTO T_ADRS-COUNTRY
FROM T005T
WHERE SPRAS = 'EN'
AND LAND1 = ADRC-COUNTRY.
*Consignee Address & Buyer Other Than Consignee
SELECT SINGLE KUNNR KUNAG INTO (LIKP-KUNNR, LIKP-KUNAG)
FROM LIKP WHERE VBELN = P_DELNO.
IF LIKP-KUNNR = LIKP-KUNAG.
SELECT SINGLE NAME1 NAME2 STRAS ORT01 PSTLZ REGIO TELF1 ADRNR
INTO (T_ADRS-CNAME1, T_ADRS-CNAME2, T_ADRS-CSTREET,
T_ADRS-CCITY, T_ADRS-CPCODE, T_ADRS-CREGIO,
T_ADRS-CTELF1, KNA1-ADRNR)
FROM KNA1
WHERE KUNNR = LIKP-KUNNR.
SELECT SINGLE COUNTRY INTO ADRC-COUNTRY
FROM ADRC
WHERE ADDRNUMBER EQ KNA1-ADRNR.
SELECT SINGLE LANDX
INTO T_ADRS-CCOUNTRY
FROM T005T
WHERE SPRAS = 'EN'
AND LAND1 = ADRC-COUNTRY.
T_ADRS-ONAME1 = T_ADRS-CNAME1 .
T_ADRS-ONAME2 = T_ADRS-CNAME2 .
T_ADRS-OSTREET = T_ADRS-CSTREET .
T_ADRS-OCITY = T_ADRS-CCITY.
T_ADRS-OPCODE = T_ADRS-CPCODE .
T_ADRS-OREGIO = T_ADRS-CREGIO.
T_ADRS-OTELF1 = T_ADRS-CTELF1 .
T_ADRS-OCOUNTRY = T_ADRS-CCOUNTRY.
ELSE.
SELECT SINGLE NAME1 NAME2 STRAS ORT01 PSTLZ REGIO TELF1 ADRNR
INTO (T_ADRS-CNAME1, T_ADRS-CNAME2, T_ADRS-CSTREET,
T_ADRS-CCITY, T_ADRS-CPCODE, T_ADRS-CREGIO,
T_ADRS-CTELF1, KNA1-ADRNR)
FROM KNA1
WHERE KUNNR = LIKP-KUNNR.
SELECT SINGLE COUNTRY INTO ADRC-COUNTRY
FROM ADRC
WHERE ADDRNUMBER EQ KNA1-ADRNR.
SELECT SINGLE LANDX
INTO T_ADRS-CCOUNTRY
FROM T005T
WHERE SPRAS = 'EN'
AND LAND1 = ADRC-COUNTRY.
*Buyer Other than Consignee
SELECT SINGLE NAME1 NAME2 STRAS ORT01 PSTLZ REGIO TELF1 ADRNR
INTO (T_ADRS-ONAME1, T_ADRS-ONAME2, T_ADRS-OSTREET,
T_ADRS-OCITY, T_ADRS-OPCODE, T_ADRS-OREGIO,
T_ADRS-OTELF1, KNA1-ADRNR)
FROM KNA1
WHERE KUNNR = LIKP-KUNAG.
SELECT SINGLE COUNTRY INTO ADRC-COUNTRY
FROM ADRC
WHERE ADDRNUMBER EQ KNA1-ADRNR.
SELECT SINGLE LANDX
INTO T_ADRS-OCOUNTRY
FROM T005T
WHERE SPRAS = 'EN'
AND LAND1 = ADRC-COUNTRY.
ENDIF.
*Other's Ref
TIDNO = 'Z071'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-OREF = mslines-tdline(25).
EXIT.
ENDLOOP.
*Buyer's Order No Ref
TIDNO = 'Z023'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-BUYER = mslines-tdline(25).
EXIT.
ENDLOOP.
*Exporter Ref
TIDNO = 'Z072'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-XPREF = mslines-tdline(25).
EXIT.
ENDLOOP.
*Pre-Carraige By
TIDNO = 'Z074'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-PCRG = mslines-tdline(25).
EXIT.
ENDLOOP.
*Place Of reciept by Pre-Carraige
TIDNO = 'Z073'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-PLPCRG = mslines-tdline(25).
EXIT.
ENDLOOP.
*Vessel/Flight No
TIDNO = 'Z075'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-VFNO = mslines-tdline(25).
EXIT.
ENDLOOP.
*Port Of Loading
TIDNO = 'Z077'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-PLOAD = mslines-tdline(25).
EXIT.
ENDLOOP.
*Port Of Discharge
TIDNO = 'Z076'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-PDISG = mslines-tdline(25).
EXIT.
ENDLOOP.
*Final Destination
TIDNO = 'Z070'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-FDEST = mslines-tdline(25).
EXIT.
ENDLOOP.
*Terms Of Delivery & Payment
TIDNO = 'Z080'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-TERMS = mslines-tdline(50).
EXIT.
ENDLOOP.
APPEND T_ADRS.
*BODY SECTION FOR LINE ITEMS
SELECT POSNR KWMENG VRKME WAERK
INTO (VBAP-POSNR, VBAP-KWMENG, VBAP-VRKME, VBAP-WAERK)
FROM VBAP
WHERE VBELN = SSORD.
*Mark/Case No
TIDNO = '0002'.
CONCATENATE SSORD
VBAP-POSNR
INTO TNAME.
TOBJT = 'VBBP'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
WA_ITEM-MARKNO = mslines-tdline(40).
EXIT.
ENDLOOP.
*Packing Type
TIDNO = '0003'.
CONCATENATE SSORD
VBAP-POSNR
INTO TNAME.
TOBJT = 'VBBP'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
WA_ITEM-PACKTYP = mslines-tdline(40).
EXIT.
ENDLOOP.
*Goods Description
TIDNO = '0001'.
CONCATENATE SSORD
VBAP-POSNR
INTO TNAME.
TOBJT = 'VBBP'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
WA_ITEM-GDESC = mslines-tdline(40).
EXIT.
ENDLOOP.
*Goods Quantity
WA_ITEM-QTY = VBAP-KWMENG.
WA_ITEM-VRKME = VBAP-VRKME.
*Goods Rate
SELECT SINGLE KNUMV INTO VBAK-KNUMV FROM VBAK WHERE VBELN = SSORD.
SELECT SINGLE KBETR WAERS
INTO (WA_ITEM-RATE, WA_ITEM-WAERS)
FROM KONV
WHERE KNUMV = VBAK-KNUMV
AND KPOSN = VBAP-POSNR
AND KSCHL = 'PR00'.
*Item Remarks
TIDNO = 'ZREM'.
CONCATENATE SSORD
VBAP-POSNR
INTO TNAME.
TOBJT = 'VBBP'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
WA_ITEM-REMARK = mslines-tdline(40).
EXIT.
ENDLOOP.
*Goods Amount
WA_ITEM-AMOUNT = WA_ITEM-QTY * WA_ITEM-RATE.
WA_ITEM-WAERK = VBAP-WAERK.
TOT = TOT + WA_ITEM-AMOUNT.
APPEND WA_ITEM TO T_ITEM.
ENDSELECT.
T_ADRS-TOT = TOT.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
AMOUNT = TOT
CURRENCY = VBAP-WAERK
FILLER = ' '
LANGUAGE = SY-LANGU
IMPORTING
IN_WORDS = WORD
EXCEPTIONS
NOT_FOUND = 1
TOO_LARGE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Gross Wieght
TIDNO = 'Z078'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-GWT = mslines-tdline(15).
EXIT.
ENDLOOP.
*Net Wieght
TIDNO = 'Z079'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
T_ADRS-NWT = mslines-tdline(15).
EXIT.
ENDLOOP.
T_ADRS-TOT_WORDS = WORD-WORD.
APPEND T_ADRS.
START-OF-SELECTION.
P_LANGUAGE = 'EN'.
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
I_LANGUAGE = P_LANGUAGE
I_APPLICATION = 'SAPDEFAULT'
IMPORTING
E_DEVTYPE = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-XSFCMODE = 'X'.
P_OUTPUT_OPTIONS-XSF = SPACE.
P_OUTPUT_OPTIONS-XDFCMODE = 'X'.
P_OUTPUT_OPTIONS-XDF = SPACE.
P_OUTPUT_OPTIONS-TDPRINTER = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-TDDEST = 'LOHP'.
APPEND P_OUTPUT_OPTIONS.
P_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
P_CONTROL_PARAMETERS-GETOTF = 'X'.
P_CONTROL_PARAMETERS-NO_CLOSE = SPACE.
APPEND P_CONTROL_PARAMETERS.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSD_REP_MULTI_PRINT1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME1
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION FM_NAME1
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS =
TABLES
T_ADRS = T_ADRS
T_ITEM = T_ITEM
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT P_JOB_OUTPUT_INFO-OTFDATA INTO T_OTF.
APPEND T_OTF.
ENDLOOP.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSD_REP_MULTI_PRINT2'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME2
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION FM_NAME2
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS =
TABLES
T_ADRS = T_ADRS
T_ITEM = T_ITEM
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT P_JOB_OUTPUT_INFO-OTFDATA INTO T_OTF.
APPEND T_OTF.
ENDLOOP.
<b>SET PARAMETER ID: 'AUN' FIELD SSORD ,"VBAK-VBELN VALUE ,
'APO' FIELD ITNO."VBAP-POSNR.
CALL TRANSACTION 'ZPL3' AND SKIP FIRST SCREEN.
IF SY-SUBRC NE 0.
MESSAGE E001(ZQOTBANK).
ENDIF.
*SET PARAMETER ID: 'AUN' FIELD VBAK-VBELN,
'APO' FIELD VBAP-POSNR.
*CALL TRANSACTION 'ZA3C' AND SKIP FIRST SCREEN.
*IF SY-SUBRC NE 0.
MESSAGE E001(ZQOTBANK).
*ENDIF.
IMPORT (T_OTF2) FROM MEMORY ID 'MEMID'.
LOOP AT T_OTF2 INTO T_OTF2.
APPEND T_OTF2 TO T_OTF.
ENDLOOP.
</b>
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSD_REP_MULTI_PRINT4'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME4
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION FM_NAME4
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS =
TABLES
T_ADRS = T_ADRS
T_ITEM = T_ITEM
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT P_JOB_OUTPUT_INFO-OTFDATA INTO T_OTF.
APPEND T_OTF.
ENDLOOP.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE = P_BIN_FILESIZE
TABLES
OTF = T_OTF
DOCTAB_ARCHIVE = P_DOC
LINES = P_LINES
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = P_BIN_FILESIZE
FILENAME = 'C:\SD4.pdf'
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
FILELENGTH = P_BIN_FILESIZE
TABLES
DATA_TAB = P_LINES
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form FINDTEXT
text
FORM FINDTEXT.
REFRESH mslines.
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = tidno
language = sy-langu
name = tname
object = tobjt
TABLES
lines = mslines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
DELETE mslines WHERE tdline IS INITIAL.
ENDFORM. "FINDTEXT
Thnx
moni
Message was edited by: md monirujjaman
Message was edited by: md monirujjamanHello,
I had thought that your 4th output of the Transaction is an output of a list and NOT from a SCRIPT.
Now, if it is a SAP SCRIPT ourput, it is quite simple as you have to get the OTFDATA from the SCRIPT. But you may have to make the correction in your SAPSCRIPT driver program.
Sample:
CALL FUNCTION 'CLOSE_FORM'
TABLES
otfdata = te_otf_table
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
OTHERS = 3.
Next you may EXPORT this OTF Data Internal Table to ABAP Memory.
In your program where you are calling all the 3 forms + the transaction which outputs the SAPScript output, the exported data may be imported and appended into the MAIN Interal Table and single PDF could be generated.
Secondly, The PRINT prieview of the SSFs could be generated by passing Export options of the SSF FM
SAmple:
ssfctrlop-no_dialog = ' '.
CALL FUNCTION l_form
EXPORTING
control_parameters = ssfctrlop
output_options = ssfcompop
I hope this helps you.
Regards, Murugesh AS -
How to print the superscript in smartform
Hi gurus,
Please tell me the procedure how to print the superscript in middle of the text displaying?
when we are displaying the smartform its converted to some special character like & .
please let me know procedure at the earliest
Regards
RajHi thanks for ur patience.
see my requirment was to print TM as superscript for HLL ,already smartstyle is there, and also a character format with superscript is also defined.
then aftet HLL how it prints as superscript.
for HLL we are using another character format and for superscript we are using the another character format.
If posiible send me the code to write in smartforms
Regards
RAj
Points are awarded for useful answers. -
How to print horizantal lines in smartforms?
hi friends,
how to print horizantal lines in smartforms.
waiting for ur valuble replies.
Thanks,
KiranHI,
If u use templates or table,then use borders to print the horizontal lines.
Eg : Create template-->Table painter->click select pattern button->Display framed pattern->select 3rd one.it will display only horizantal lines.
if want to print horizantal line under the text, then create one paragraph or character formate with Underline in smartstyles.Use that paragraph or character to u r text element
Maybe you are looking for
-
I can´t upgrade IOS 5.0 or 4.0. I don´t know what to do!
-
How to add edited text from photoshop to dreamweaver
I edited text in photoshop to make it look nice and sparkly. I am trying to put it in a flash site but do not understand how. the context file only allows you to choose the color and type of font but nothing more such as drop shadows and such. when i
-
Where can I find a replacement stylist?
I have the Palm Treo and my stylist broke. Can I buy replacements to fit my phone? Post relates to: Treo Pro T850 (Sprint)
-
Why does NI CAN Example use NI CVI?
Hello, when you buy a NI CAN Case (e.g. USB<->CAN: NI USB 8473) and install the drivers, the examples are also installed. When you open the example C:\Programme\National Instruments\LabVIEW 2012\examples\nican\Frame - Basic.llb you will see that the
-
Automating OS install in WDS with multiple boot image
Hi, can someone explain to me if it is possible to completely automate a windows install in WDS with 3 different install and boot image. I am new to this and trying to learn everything i can. I have 3 unattended files attributed to each install.wim a