Smartform - Printing image issue

Hi, this is my first post in this forum, I am learning ABAP and I am starting with smartforms.
I want to print a PO, and i can print several PO because I have a Select-option on my Selection screen regarding the company customers.
In order to print it nicely I have created two pages, the first points to the next_page and my next_page points to next_page.
On the end of the PO I want to print an image with the company data. But my problem is that the image is not appearing well.
If I have 1 customer with 2 pages the system prints the image on the second page, and it is ok. But If I have more costumers the image will not appear until the last page is reached.
Thanks in advance

Hi John
Make a separate window for displaying the image and insert it into the pages so that the image is displayed irrespective of the number of customers.
You can add this window in both the pages to display in both.

Similar Messages

  • Smartform Printing Tray issue

    Hi,
    I have an issue for printing multiple tray. My req is first page nneds to print from TRAY 02 and the second page from Tray 03.
    I configured in the smartform PAGE01 - Output options- Resource name - TRY02 and
                                              PAGE02 - Output options- Resource name - TRY03
    But both the pages printing for the same tray. like tray02.
    Aprat from the resource declaration anything need to do for this?
    Please guide me any one.
    Thanks in advance.
    Vijay.

    Hello,
    Is it a frontend printing? Which device type is used?
    In recent SAPGUI patches, it is possible to map the tray ids via the
    Frontend Options Editor/ tab 'Printer Tray Selection'.
    (see KBA 1704243 about how to access the Frontend Options Editor)
    Please test the following:
    Select the printer model and in "Paper Trays", select "Tray 1",
    in the field "SAP ID" enter the value: 1
    and,
    select "Tray 2", in the field "SAP ID" enter the value: 2
    Do the same for Tray 3, 4...
    After this, please restart SAPGUI and test the printing.
    Regards,
    Wen Peng

  • Issue with  print image in air

    hey frnd,
    plz check this link
    http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
    hey frnds,
    while using this multiple print datagrid code, getting 1 issue with
    print image in printheader mxml file.
    I'm adding 1 image tag and runtime getting image path in variable and
    want to print tht image in header ,
    but it is not get printed but if i'm giving @Embed image as a source
    then it is print.
    Is any way there to print runtime image after adding in printheader
    file ?
    thx in advanced,
    [email protected]

    is any solution there ?

  • Print quality issues

    Hello
    We are having print quality issue when printing PDF's to our Canon iR C2880/C3380 UFR II.  This was the most recent print driver from canons website which was download about 6 weeks ago. version 2.9.  At one time we were having other pring quality issues and we changed from the post script driver to the ufr ii which solved the problem at the time. 
    This past saturday we upgrade the operating systems on the systems in question and they are now running windows 7 64 bit with service pack 1 installed. image 1 is the orignal pdf that was printed with a 3rd party pdf printer(PDF Xchange view version 2.5)  image 2 is the same document that was printed using acrobat reader 10.1.2
    the options for the print were pretty much identical between the program.  Print as image was not selected.  1 thing to note with the acrobat when  print as image was selected there was a slight improvement in the print quality.
    Any help would greatly be appreciated.
    image 1
    image2

    Hi, nd a warm welcome to the forums!
    Off the bat, it looks like maybe bad RAM/ROM in the Printer, or corrupt Font.
    Can you have another Computer jook to it and print for a test?
    Can you try Printing from Adobe Reader...
    http://www.adobe.com/products/acrobat/readstep2.html
    Can you in Preview, Save As a picture format for a test?

  • LaserJet Pro 200 color MFP M276nw prints image shifted 1/2" from top of page.

    When printing any report, diagnostic or form from the machine system I get printed image shift approx. 1/2" from the top.
    Is there any adjustment that can be made to the MFP to center image?

    Hi @patrick22152, 
    I understand that when printing documents or a printer hardware self test, it shifts 1/2" from the top of the page. I can help you with this.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    It sounds like the paper isn't feeding properly. Since you are having this issue with the hardware tests and printing from the computer. If it was just the computer, I would check the paper type selected in the print driver, to make sure it isn't set on the proper paper type and not the default unspecified paper.
    Try another type of paper to see if you get the same results.
    I have provided a document with some steps to try to see if that will resolve the issue.
    'Load Paper' Error Message Displays and the Printer Does Not Pick Up or Feed Paper.
    Disregard the title.
    Here is a example of how the Configuration Report should look like.
    Printing a Configuration Report.
    Run a cleaning page:
    From the Home screen, touch the Setup button.
    Touch the Service menu.
    Touch the Cleaning Page button.
    Load plain letter or A4 paper when you are prompted.
    Touch the OK button to begin the cleaning process.
    What size and kind of paper are you using?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Print image shifted?

    I own an HP Photosmart A524 photo printer. Before you tell me that HP has no info on this printer on their website, let me explain that I bought it as a kit (called HP Photosmart Compact Photo Studio) with a camera (HP Photosmart M447) from WalMart. HP has no info on this printer on their website that I could find, but there are similar models like the A525.
    The problem I am having is that when I print via USB, the image is shifted. Printing via uploading a pic to the SD card and using the onboard card reader prints perfectly fine, but uploading the image, putting the card in the printer, and finding each image (which is buried deep among other pictures from my camera) is a hassle. When I print from the picture, instead of printing correctly the image is shifted to the left ~1cm and down ~1cm (diagonally, sometimes it's the opposite if I print from Picasa instead of Windows Photo Viewer) and never correctly; a "half" margin is always present, half because it is always on 2 sides. I downloaded the Windows 7 fix on HP's website for the A525, which didn't correct the problem, and I also tried installing the full installation avalible for Vista for that printer. The full installation was incompatible, and when I ran it compatible with Vista SP1 and with elevated admin rights, it said I needed to run as admin, even though I already was.
    Does anyone have any ideas? I really want to get this fixed, especially since I have this printer networked and want to be able to print photos from another computer without walking upstairs, getting the SD card, transfering photos, etc. The SD card method works, but. . . you know, it shouldn't be doing this.
    Thanks,
    Ryan

    @Marshall-
    I tried your solution by switching from the Photo Printing-Borderless setting to Photo Printing-with white borders. A suprising changed occured; though the image was  a very little bit distorted, sort of rotated, the print image was not shifted. This boosted my previous theory that distortion happened after the image was sent to que and before the printer recieved it, indicating a driver issue. That's where I think the issue is.
    Thanks,
    Ryan

  • PRINT OUT ISSUE

    on the right hand side of the Print out there are black lines appearing in the print out . I got  the toner cartridge refilled also.  what can i do to remove those lines on the right handside ?
    I would request the HP experts to please advise solution to this problem on my e-mail id : [edited  by Moderator] as well as here.

    Hi @SATISH1952 ,
    I see that you are getting black lines on the pages. I can help you.
    HP recommends that you use Genuine HP toners. HP can't guarantee the quality or reliability of non-HP toners, or refilled HP toners. The following solutions might not resolve your print quality issue.
    I have provided a document to go through the steps to see if it will help.
    Troubleshooting Print Quality Issues.
    Inspect the toner cartridge for damage:
    1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
    2. Check the memory chip for damage.
    3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
    CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
    Fingerprints on the imaging drum can cause print-quality problems.
    4. If you see any scratches, fingerprints, black toner or other damage on the imaging drum, replace the toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
    If the problem persists, try Genuine HP Toners.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hoy to print image from GOS Attachment List

    Hello all:
    I have to print images attached as JPG format in Generic Object Service Attachment List.
    For Example: One material has several pictures. I need to print all them in a individual material report.
    The report is Smartform.
    Any Idea how to do that?
    Than you very much.
    Ibrahim Andres

    Hi Eray,
    I have come across an similar requirement, Can you please share the solution for your mentioned requirement.
    Thanks,
    Mansi

  • Printing CM Issue

    I was pleased to find that I can now print from LR 1.1 directly to QTR using CM and QTR Create-icc RGB profiles without crashing (always crashed in 1.0). However, there is still a problem with CM in LR 1.1 when using these profiles. Prints are flat and muddy with low contrast (using either perceptual or relative intent). Same file and profile produces perfect prints when printed from CS3 with perceptual intent and BPC on. I can also get a good print by first converting the image file to the QTR Create-icc profile in CS3 and then printing from LR 1.1 with CM turned off (eg. "printer managed"). It seems to me that LR is not using the icc profile correctly when rendering for printing. Is there a CM fix in the works for the next release?

    Hi there @comicsans , welcome to the forums!
    I am responding to your post about the printing issue you seem to be having, as your print outs seem to offset by 5cm when printing in landscape, and all print settings and the print preview are and appear to be correct.
    I am going to let you know what my personal suggestions are and some steps you could try that might help you.
    To start with, you can use this troubleshooting guide that will bring you through steps to help with print quality issues. I am thinking that the printer may need an alignment. The test print you'll print out will show you the results if the printer itself has an issue.
    Fixing Print Quality Problems for the HP Photosmart Premium All-in-One Printer Series (C309)
    If the test print from the above guide shows no issues, the problem could be within the program you're printing from or a driver conflict.
    You can try Uninstalling the Printer Software , restarting your computer, and then reinstalling the printer driver and software. To get the driver you need, click this link, select your operating system, driver and download: HP Photosmart Premium All-in-One Printer - C309g Drivers
    It's also a good idea to try printing from another program, which will rule out if one program is solely the problem.
    Feel free to let me know your findings and results!
    I hope my post was informational, enjoy your Thursday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printed image is half black and half red on A4 paper

    I printed an image using Windows's default printer program. 
    The black photo ink cartridge is very low and the text one is around half.
    I printed the image onto  A4 paper in landscape. The image takes up most of the page. 
    The last half to be printed looks red.
    Which cartridge prints images onto A4 paper?

    Hey there @KyleGriffiths , Welcome back to the forums!
    The printer will use a combination of all of the ink cartridges to print, to best answer your question. I posted a link below for you to check out as well, which is all about how ink is used. You can certainly try troubleshooting "Print Quality" issues for the type of concern you have, which should let you know if the ink cartridge(s) or printhead is to blame for the quality issue. Try the troubleshooting guide below to find out.
    Ink Usage in Inkjet Printers 
    Fixing Print Quality Problems for the HP Photosmart 7520 e-All-in-One Printer Series 
    If you wish to show appreciation or thanks for the response today, click the "thumbs up" button below!
    I hope you have a great Friday, let me know the results and I will do my best to help!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Photoshop to Epson Printer Margin Issue

    I have a small print shop and have had an issue with the new Photoshop CC not printing images with correct margins on and Epson 9890 and 11880. If I set the image to center on an 8x10 sheet (or any other size). The image comes out skewed to the upper left. between .125 and .25 inches to the left and to the top. I never had this issue with other versions of Photoshop.

    Thanks for your reply. I understand that the print driver sets the margins. This has always been the case. However, if I print from a different version of photoshop on the same computer with the same printer, I do not see this problem.
    It is as though Photoshop is centering between the right margin edge and the left paper edge, leading the print to be off center. If it simply centered between the margin edges (as it always did in the past) there would be no problem.

  • Smartform Printing on both sides

    Hi.
    I am fasing an issue in smartform printing.
    we are printing the Invoice.this invoice data is dynamically comming on the front side of the page.
    and printing normally.
    but back side of the page they want to print the comapany rules(on every page back side).(these rules are comming with in one page only).
    so on the front side this invoice data and back side Comapany rules shouls come.(we don't know how many pages of invoice data will come).
    Plesae help me to solve this issue.
    Thanks in advance,
    Regards,
    Eswar

    HI Eswar,
    If you have only one page made in your smartform you can make one more page with just the main wiindow.This window will have all the rules of the company.Now make the first page point to this page and make this page point to the first page.
    Select duplex printing in the page attributes and print.This will solve the issue.
    Reward if useful.
    Thanks,
    Dishant

  • Print image area shifted in illustrator cs6

    I'm on a Mac working in Illustrator CS6. I went to print out of the print dialog box and after I printed, I noticed that the margins are larger on one side that the other. I re-opened the print dialog box and double clicked in the area that shows the artwork prior to print, to re center the artwork in the window, and noticed that there two dotted lines in thw window. One being the artwork, and the other is the image printable area. Well when I double clicked on the dialog box to re-center the artwork in the prinatble area, the art works centers, but the printer image area is offset, or nudged upward. When I print the margins are larger on one side and not centered. Heres the million dollar question,"How do I re-center the image area for printing so when I print, the artwork is centered?" I'm not printing boarderless. Thanks for your help in advance. I will try to include a pic if needed.

    Update! No update! Adobe did send me an e-mail stating that they were trying to call me. They had been trying to call the wrong number. ?????? I don't understand that. My Adobe profile has my right number. Anyway still waiting.   I had to call them back again and when I did, I waited 30 min. Finally got someone. Waited for them to review the notes another 10 min total, proceeded to ask me my problem with the download???????? Thats not my problem! ADOBE C'MON! The representative told me it had to be escalated to next level. Wait a min................ the last two calls ago, they told me the issue had beed elevated as high as it could be, to the developer/engineering level. I feel I'm getting the run around! Sorry for the venting, but dont release a product if it doesn't work. Been a month total! Out of business! Shouldn't have gotten rid of my other machine with CS5. I'll keep you posted.

  • HP Laserjet 4250 - While Printing PDFs with Watermark, Prints images as scrambled

    Hi,
    I am using HP Laserjet 4250 printer. While Printing PDFs with Watermark, the printer prints images as scrambled. It prints the part of the image as scrambled which is overlapped by the Watermark. The other part of the image is printed fine. When seen on the screen, it shows up the image with the watermark properly. Could you please suggest how to arrive at a solution for this problem. Thanks in advance.

    Hi @Sebastian43 
    I suspect your question would be better answered in the HP Enterprise Business Community,  as the HP LaserJet 6L is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging.  When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP LaserJet 6Lse Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • MS Word print images fuzzy

    When I look at images in a MS Word document, they look fine. If I then go to print the document, the images come out fuzzy. Printing the exact same doc file in Windows comes out okay. If I look at the preview of the print, it is again fuzzy. Some doc files I print are perfectly okay and the images are good quality, but not this file.
    I have looked through the preferences and the MS help and there is no mention of anything dealing with print image resolution.
    Any ideas or suggestions?
    CT21

    I had another question relating to PDF filesizes and I think the 'fuzzy image' issue is related to it.
    See http://discussions.apple.com/thread.jspa?threadID=1911069&tstart=0

Maybe you are looking for