SMARTFORM Printing: Invoice header company name does not appear

Hi Experts,
I have a problem with the invoice SMARTFORMS whereas when the invoice exceeds more than 1 page, the company name at the left topmost part of the form doesn't appear. The window that contains this should only appear in the first page and when I'm printing an invoice of more than 1 page, the company name doesn't appear in the print-out.
Any idea what would be the problem? or how to resolve this? Thanks in advance
Best Regards,
Kurtt

Hi Experts,
Thanks for taking time to help on this. Yes indeed it is appearing on the first page only. The problem is that the text element that contains the company name in that window doesn't appear if the invoice exceeds 1 page.
Let say if the invoice to be printed has 2 pages then the company name doesn't appear.
But if there's only 1 page to be printed, the company name appears.
No condition specified in the text element nor in window.
Any idea? Thanks!
Best Regards,
Kurtt

Similar Messages

Contact name does not appear after upgrading to iOS 5

I recently upgraded to iOS 5 and after doing so, contact name does not appear when someone calls; but text messages the name appears. I have saved all my contacts under +9 format.

This indicates that the phone was carrier locked and had been 'hacked' to unlock it. Updating the phone has re-locked it to the original carrier.
ONLY the carrier it is locked to can authorize unlocking it. Not all do so. Contact the carrier and find out what their policy is.
If it's locked to AT&T, you may as well sell it and buy a new phone. AT&T will not unlock iPhones for any reason.

CDs loaded, Artist name does not appear in ARTISTS list

Among all the CDs I've loaded and songs purchased, I have 2 Carly Simon
CDs on my video iPod. However, Carly Simon's name does not appear in my
list of ARTISTS in the Music Menu.
I did a sync with my iTunes list and the songs are indeed loaded.
Why is her name missing from the list and how do I get it back?
It used to be there!
Thanks-

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

Error in F110 posting telling that company code does not appear in proposal

Hi Everyone,
During the aotumatic payment run via F110, after creating the proposals when i am trying to display the proposal, it is giving an error message that " Company Code XY12 / XY12 does not appearin proposal 08.07.2011 AB00; correct "
But I already set company code XY12 , in the company code in the parameter tab. I ahve also set there payment methods and next payment date. Please help.

Hi Dear,
Chk these links
http://sap-f2.blogspot.com/2009/06/fz003-company-codes-do-not-appear-in.html
Company codes 0001/0001 do not appear in proposal 20.11.2009 A#04; correct
http://www.sapfans.com/forums/viewtopic.php?f=10&t=188134

Printer driver for lexmark x6570 does not appear in printer setup utility

Hi
I have just bought a lexmark x6570 wireless printer and have installed the driver on my powerbook, set up the printer (using a usb lead as instructed) but am unable to print anything as the printer driver does not appear in the printer setup utility. I have even tried to move the folder that was created on the desktop to the printer folder in the library folder but still no joy.
Someone help me please!

@YDNA1958
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

When receiving a call on my iPhone 4s the contact name does not appear

when receiving a call on my iphone 4s the conact name does not appear

This should fix it:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again to verify that it's fixed.

Website name does not appear

My website name does appear on yahoo or google. The website is burgerburgerny. I do not see burgerburgerny, only "main page"
Ernest

Your URL is ...
http://www.burgerburgerny.com/burgerburgerny/burgerburgerny/main_page.html
You need to change the name of your "Home" page to to "burgerburgerny" and direct your URL to this page so that it becomes...
http://www.burgerburgerny.com/burgerburgerny.html
Ask tech support at your hosting company to help you with this.

Artist name does not appear in artist list but album name is in album list - Ipod Classic 160gb

For an album I have imported onto my iPod from iTunes, the album name is in the Album list but the Artist name is not on the Artist list. I have tried deleting the album from the iPod and re-adding from ITunes but the same result. It is a single artist album, so the artist name is exactly the same for each track; all the tracks are there. Big nuisance as I use artist name a lot to find specific albums.

ecb31 wrote:
this did not work for me,
Possibly because your problem (you say) was the album name. The original post was about the artist name and is therefore a different problem.
ecb31 wrote:
...I had to fill in the Album for each song, then it showed on my ipod, for ones I did ot know, I just put bloody apple.
Huh?
Let me get this right, you had lots of songs without the album name in them, so you filled in the album name yourself - if you knew the album name. If you didn't know the album name, you then entered the same text on all the rest of those songs. So now, you must have a lot of songs all on the same album, even though they're not meant to be - and - you've put text in to a lot of your songs that will remind you forevermore, of just how unhappy you are.
Well! &
My question to you is; where did you get the songs from, that they came without the correct information in them?
If you imported them from a CD, iTunes will go and get the information for you.
If you bought the songs from the iTunes Store, or another music retailer, the information is in the digital file that you purchased.
How therefore, does so much of your music appear to be incomplete?
Am I missing something, or have you simply failed to explain the porblem properly?

Airport BaseStation's name does not appear in list of workgroup's members

I have a windows workgroup called NUCFAM with two PCs running XP Pro in it.
I have replaced my linksys router with an Airport Extreme Base Station to which I have attached two printers and a disk. I have configured the AEBS to have the Airport Extreme name "celery" and I have configured the AEBS to be in the workgroup NUCFAM by using the Airport Utility>Disks>File Sharing panel.
On Windows, where I have installed BonJour, each of my printers is listed as located at celery in the printer's properties.
However, in Windows Explore>Tools>Map Network Drive if I click the Browse button
a dialog appears that lists, under a node labeled NUCFAM, the names of my two PCs but not the name of the AEBS, i.e. celery. Instead the AEBS is named by the same twelve hex digits that Airport Utility lists as its Ethernet ID.
And in a CMD shell
net view \ \celery
fails to find the network path. However,
net use \ \10.0.1.1
does find the AEBS and lists the disk's name.
Can I get the AEBS to appear on the Windows side with the AEBS's name?
Thanks.

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

Problem with Calendar and drag and drop a name to a Time spot with palm desktop. Full name does not appear only last name.

Im having a problem with the palm desktop. When in “Contacts” and I list (LastName,First name) and then I move to the Calendar and drag and drop a name to a Time spot Only the LAST name of the Person appears. How can I fix this so that I can see there full name ?
Also when If list (Company,Last Name) then go to calendar Some of my contacts are out of order but if I drag and drop them into the calendar day the full name appears. Is there any why of fixing this ? Or having it work properly ?
Im running XP pro
Palm Desktop Version 4.1.4
Post relates to: Treo 680 (Rogers)
Message Edited by corrado on 07-21-2008 08:55 AM

Any Idea how to fix the problem that I am getting when using the (Company,Last Name) and the contacts being out of order in the calander ? I have some last names starting with A then it goes to D then a B then a stack more A and none of then have a Company field filled out in them in them...
Thanks for looking into that for me but it seems really stange to offer the option but not put in the first name in the calander when you drage the name over. I hope this is fixed in the future. Can anyony sugest another desktop platform I can use if I cant fix my problem with the (Company,Last Name) problem?
Post relates to: Treo 680 (Rogers)

Pop-up after saving invoice in MIRO/MIR7 does not appear during replay

Hello All,
I have a problem with the execution of the eCATT Script for Transaction MIRO and MIR7. After the document is saved/posted in MIRO we get a pop-up with the FI document number and a few other information. While recording, i am able to get this pop-up. But while i replay, the script stops in the step where i press save and the document number is displayed in the status bar.
Normally this would not be a problem as i will be able to check for the document number from the corresponding table. But in one scenario where i have to park an incoming invoice using MIR7, i need to specify the department at the end. This step occurs as a pop-up after i press save similar to the pop-up with the document numbers. Now, if i do not specify the department, subsequent steps in my process will fail. I am unable to find an alternative for this.
Has anyone faced this issue while replaying MIR7/MIRO? Please help,
Regards,
Sidhaarth
Edited by: Sidhaarth V N Mohana on Nov 21, 2011 2:18 PM

> i am not able to capture the asset number that got generated >after doing the call transaction.MESSTAB returns no value
are you sure..? did you check the messagetab check all the message variable once again
MSGV1
MSGV2
MSGV3
MSGV4

My newly purhcased Domain Name does not appear in sidebar...how do I link

I have purchased southbaygunnersredondo.com and followed all the steps to link the name with the website I created using iweb. When I look at my me.com account, I see my new domain name listed and ready to use, but it doesn't show up in my sidebar in iweb so I have no idea how to link the domain name with the site I created. help-

Is this the URL?
http://www.southbaygunnersredondo.com/southbaygunnersredondo.com/Welcome.html
Try a shorter Sitename. It's a bit overdone to display it twice.
You do not have to link anything in iWeb.
iWeb gets the domainname from the MMe server and will only use it to create the RSS and subscription links.
You can keep using the web.me.com/username address and the domainname address.

Contact name does not appear in "from" column, only email appears

I have a contact for which there is an address book entry that contains a physical address, AIM/MSN, and email. However, in my inbox in the "from" column this person's full email address instead of their name appears. When I open the message, the contact's name is correctly displayed in the "from" line. Why is there this discrepancy? How can I fix this?

I have the same problem with Tiger mail. Some, not all, of my Address Book contacts appear with the full email address and not the contact name in my Inbox. If I open the email, the correct contact name then appears. However, if I attempt to reply to this individual using the reply button, the resulting email address that appear in my email message is not accurate and is some corrupted iteration of the correct email address. I have looked at the raw source for these incoming messages and the email address that appears there is fine (just like I have entered in Address Book). Any ideas?? Thanks.

Company Logo does not appear in Excel and HTML, but appears in PDF and RTF

Hi,
I have a RTF template with my Company Logo Embedded. When I run the report from Standard Request Submission, and I give the output type as Excel or HTML, I dont see the Logo on my report.
When I give the output type as PDF or RTF, then I see the logo on my report.
Is there anything special I need to do, to see the Logo in Excel or HTML ? Am i missing anything.
I am using Oracle BI Publisher Template Builder for Word 10.1.3.2.0
I would really appreciate if you can pass your feedback.
Thanks
Kiran

Did I post my question in the wrong Forum ?

N82 - contact name does not appear !!

When I receive a text, normally the name of my contact appears.
In a few cases only the contact's mobile number comes up and I cannot get the N82 to recognise that it is the same person.
Is there a trick to this ?

This happens when you have a duplicated entry in your contacts.
For example you have "01234567890" saved as "Mum" and you also have it saved as "Dad". The phone has no way of knowing which contact is calling so it only displays the number.
Check for duplicate entries and remove them. If you don't find any duplicates compare a contact that works against one that doesn't and see if anything looks different in the number format, like a country code.

SMARTFORM Printing: Invoice header company name does not appear

Similar Messages

Maybe you are looking for