Smartform square brackets or check box

Hi all,
Please help me in the issue . I output of the smartform should have checkboxes or square brackets . I tried using standard symbols but i didnt acheive it . can anyone please sugguest me how can i acheive .
thanks in advance,

Hi,
If the check bax you are expecting is for interactive purpose, then you need to go for adobe forms. If it is just for showing in the layout then you can try below 2 ways.
1. Upload an image of the check box to your SAP system from SE78. Print this graphic as you normally print the LOGO. ( you can create a node of type graphic)
2. Create a text element and print a single dot. Set the output options of the text element as below.
Select check box "Lines with" under the frames section. Give the appropriate spacing and width say 1 PT each. Now it shows a small box with the frames. If it is in main window, then you may need to create a template for controlling the width and hight of the element.
Thanks,
Vinod.

Similar Messages

Smart Forms - Check box

hi all,
In smartforms we display the check box by using sap symbols. I dont know how to activate the checkbox through smart form itself or se 38 prgm itself. Pl guide me.
Regards:
Manoj

Hello Manoj,
This is what happens if you do not give the complete scenario.
If you are using a SF. Create an alternative node:
1. If true, call the text having symbol <697>
2. If false, call the text with symbol <727>.
I hope you know the condition based on which the checkbox has to be displayed.
BR,
Suhas

Check box type square in Smartform

How can we print a small sqare (like a check box) in the smartforms?
I need these boxes in front of
cash
dd
cheque
The use can tick this by pen on the hard copy
Thanks

Hi,
you can use either any one of the follwings in your text elements.
<727>
<2039>
in the print preview, it wont be visible. but when you take the print on the paper you will see the check box.
<REMOVED BY MODERATOR>
regards,
balu
Edited by: Alvaro Tejada Galindo on Apr 22, 2008 4:01 PM

How to print Check Box in smartform

HI,
How to print check box in smartforms. I am using Include Sap Symbol but in the print it is coming as #. Do we need to do any setting like we do for barcode?
Thanks
Raghavendra

hi,
u can print a check box in different ways.. by inserting symbols and making window as check box..
once go through the thread u will get to k now differnt ways
putting checkboxes in smartform?
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

What r the steps to display check box in smartform

can anyone tell me the procedure to display the steps in smartform

Hi~
You can find so many stuffs here as vinod said.
If I explain more additionaly,
In your smartforms, you can find small icon for 'TXT Editor' and then you could find symbols here,
Inclue -> Characters -> SAP Symbols.
In symbols, you may find 'SYM_CHECKBOX' for checked one, and the other 'SYM_LARGE_SQUARE'.
looks like somepeole says it doesn't work in some cases, at that case, you can use [X] ,[ ] instead.
refer this one.
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Urgent ! how to put check box in the smartform
Regards
kyung woo

Urgent ! how to put check box in the smartform

can anyone tell me how to display a check box (unselected) in the smartform.....

Hi,
Try this.
Change the editor to 'PC Editor' and take the menu.
Include -> Characters -> SAP Symbols
Check this also.
Re: How to create checkbox in smartforms??
Message was edited by: Jayanthi Jayaraman

How to print check box from smartform

Hi friends,
Any body help me ???
How can we print a check box in a layout from smartform.....

Hi Shashi,
You can't directly print a checkbox as such in a smartform. But, there is a workaround.
Create two GraphicElements (for checked / unchecked). Assigned images to (for tick and untick) them.
In the conditions tab of GraphicElement enter conditions -
1. for checked - field = 'X'
2. for unchecked - field = ' '
To add images of tick and untick to system, Use transaction SO73.
Regards,
Manish Joshi

Adding a "normal" square check box as a Pages 09 bullet?

I would like to add a "normal" check box to my text bullets or image bullets in Pages 09 for more formal documents. The "artsy" check box supplied with Pages 09 is inappropriate for my work. Is there a way of getting or using a normal square check box for pages?

The changes are in the document, not in the program.
When the program will open this hacked document, it will grab the xml instruction as is.
If the syntax is modified as it was from Numbers '08 to Numbers '09, the keywords will change but not the contents.
Its the beauty of XML
I wish to add that I posted this hack because it is not machine dependent.
If you apply it on your machine, the document will behave the same if you open it on an other system.
I would not did that if the document was OK only on its source machine. Not sure of my syntax but I think that you may understand. You may re-phrase it if it's really too odd).
Second addition.
As you saw, there are nine predefined bullets.
If you edit the embedded descriptors you may have nine + nine different bullets. But you may also edit already edited descriptors.
So, if you want to build a really ugly document you may use a huge number of different bullets (Pandora's box is open).
Yvan KOENIG (from FRANCE vendredi 24 avril 2009 11:23:27)

Page protction check box is disabled in smartform

Hi Everybody.
      I need to have pageprotection for a table node in smartform.
The issue is the pageprotection check box is disabled in outputoptions of table node.I tried to create a folder & put this table node inside the folder. Then also the pageprotection check box is diabled in outputoptions of my folder. Pls guide me in resolving this issue. Do we have any other go to have page protection for the table node.Table node is must in my requirement.
Thanks in advance.

Hi Mohammed,
                   I think Page protection is not possible inside the table node it wont work.
                          Better create seperate templates for header data and main area,footer .you can create loop for main area and try page protection command inside the loop.
     Hope you can get your result..
Thanks
Anil.D

Putting tick mark into check box in smartform

hi,
   can any one please let me know if i can put a tick mark in the check box of the smartform.
   for example: i need to select one among yes or no check box. how do i do it.
   should i have to upload a graphic of the tick mark and then display or is there any provision in smartforms to do that.

Hi,
Check threads like
smartform- check box
and
what r the steps to display check box in smartform
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

How to put Check Boxes and Radio button in Smartforms

Hi all,
How to put check Box and radio button in Smartforms ............ from web properties there is an option to use. But How to use.
regards,
Mohsin

u can declare the checkboxes or radiobuttons whatever in driver program and pass the same to ur form...

How can I take check box in particular cell of the table in smartforms??

Hi experts,
pls tell me how can I take check box in particular cell of the table in smartforms??
It is not interactive form.
I hv taken small windows as check boxes.but i think it is not a proper solution....give me another solution...

Hi,
first create text for a particular cell.
In that we have a text editor in that text editor we have symbols in include menu.
whatever the symboll u want to put to ur cell . just assign it.
please check it. if it helpful reward points.
regards,
satish.

Re:check box in smartforms

Hi all,
How to add a check box in a smartform ?

You can use the following in menu bar.
Insert->Characters->SAP symbols->SYM_CHECKBOX
But in second method you cannot see checkbox in print preview.Check out whether you are getting it in printer.
Regards

Smartform- check box

Hi all..
I need to display a check box on the print form using smartform.(end user just tick it maually on the hard copy of it).
Can any body sugest me regarding this issue

Hi Parmesh/Tafkap,
Try this :
Sartforms Text elment> Change> Include(Menubar)>Characters--> SAP Symbols --> Select Check box (SYM_CHECKBOX)
This will create :
C <697>.
Please award points if this helps .
Lanka

(Smartform)check box display in a table....very urgent

Hi..
i inserted check box by going to sap symbols and inserted check box but i am unable to see print preview and also in the printout.
Can any one tell me how to insert check box in a table.
your help will be appreciated.

Hello,
As discussed earlier in many posts, it is better you load a graphic for Check box ( Checked and Empty ) is Tx SE78. You can create .bmp files for the same in MS paint.
In a table node in the SSF, every line in the table will be accessed once in a loop. So you create an alternative node to check the condition when your Check box is to be checked or empty ( may be based on some field data in the work area). Then you call the necessary graphic ( Checked check box or a empty check box ). A Graphic node is to be created under the alternative node. Do remember to place the graphic in appropriate Line and Cell in your table by giving proper output options.
Hope this helps you.
Best Regards, Murugesh AS

Smartform square brackets or check box

Similar Messages

Maybe you are looking for