Smartform translation
i have done a smart form in english i tried to translate it to finnish by first changing
the attributes of that form cto Selecte LAnguage-finnish and
went to se 63
translation
r/3
ssf
object name- i gave smart form name
changed the target language to fi
wen i tried to edit it it says INCORRECT CODE PAGE .COUL U PLZ HELP ME OUT OF THIS
Hi krishna,
1. The problem with translation and smartforms, is the activation. You need to finish your smartform, activate it and after translate it.
If you translate the smartforms without activation, you will have problems like your.
Even then, if u r problem is not solved then check this,
Inside the smartform itself
under the Global Settings-> Form attributes
click on the form attributes and then on the right side u can see a display of two tabs 1) general setting
2) Output options
click on the General settings
there beneath you can see a box for Language Attributes
in this box you clearly mention the langugae into which you want to translate.
Similar Messages
-
Se63 -Smartform Translations NOT UPDATING
Hi,
When I update my smartforms with additonal texts to be translated I activate and Exit smartform transaction
and go to se63 - Smartform translation, however, the changes that I made in the smartform does not reflect
in the Smartform translation.
I do not see the new texts that I've created.
Please AdviseHi Donna,
I hope you will help me in using se63 Tcode
Requirement is like this. the text written as text element in smartform ( dunning letter) should get converted to respective language of the customer to whom that dunning letter is given.
I translated the smartform into finnish,(right now for language 'finnish' only, I am doing and not for all languages) thro se63.
I dont know the next procedure after that,
Please provide the next steps after this.
the driver program for this smartform is standard function module. so i cannot change anything in function module. the tcode throu which printout is taken is f150.
rgds,
Madhuri -
Problem in smartform translation
Hi All,
I have copied standrad PO smartform as a Z form with language as English.Now the form has some translated text in
German language and I want to make chnages to this German text.I go to SE63 and enter form name
and write 'Source Language' as EN and Target language as 'DE' and I get an error saying
'Incorrect codepage'.Pl let me know how to correct this error.Follow up this links, using SE63 transaction code
http://help.sap.com/saphelp_sm40/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/content.htm
SE63
Regards,
Joan -
Smartform - translation to from english to ukranian
Hi,
i'm gettinh a problem with my smartform.
i've a field UOM(Unit of measurement), when i'm executing the smartform in English language.. i'm getting the correct value, which is 'ST', but after translation to Ukranian language i'm getting '******', though i've done translation for variables.
thanks
Regards
NitinHi,
There is no need to create or copy smartforms in different langaguges as we are doing in SAP scripts.
First please check :"Translate to all language Radio button". (Path: T/code "Smartforms "> enter form name> Form Attributes>Language attributes> set the radio button "Translate to all languages"(allow all languages for translations) or Set radio button to "selected languages" (allow specific languages for translations) and Add Spanish language.
Translations you can do via T/code SE63:
Path T/code SE63>Translation(Menubar)>R/# enterprise> Other Long Texts> Select SSF(For Smartforms)-->Enter form name at (Object name) --> enter Source language and Destination language.
Regards
Ram
Pls reward points if helpful -
Hi All,
I created few smartforms in development system and i translated them into different languages by logon into that particular language. I last activated one smartform in english language. Now i have to make modifications to the japanese content through Production Support system. For this i logon into production support system with logon language as 'JA'. When am opening the smartform in Display mode i can see the japanese content. But when i am opening the smartform in change mode the content of the smartform was displaying in english , how to solve this issue.
Regards,
LakshmiHi souji,
Example: If you want to translate smartform then steps are:
Step1 :
T/Code > Smartform>Global Settings -->genreal attributes Tab > Set flag (Radio Button)transaltionTo all languages/ Restricted languages
Please set this flag.
STEP2:
Translation:
Use T/code SE63>Translation(Menubar)>R3 enterprise> Other Long Texts>select " SSF"-->Enter Smartform name and from language and destination language.
STEP3:
Transporting translations :
Please execute the following program for transporting translations : RS_LXE_RECORD_TORDER
Target language = * or Target transalation lang.
Object type = SSF
Then Press Create Transport Request button. Create Request.
Then include all your translations to that request.
I hope this will solve ur problem.
Please check & Let me know.
Regards,
Raj. -
Smartform translation into other language
Hello Experts,
i have a requirement of printing of smartform in multiple languages i.e english and french or english and chinese depending on the selection. i have developed my form in 'English'. Now, how to translate the form in other language? Whats the process of doing that..
Can you please explain step by step
Regards
ShekharHi,
First you change the seetings in your Smartform.
Goto Global Settings ---> Form Attributes ---> General Attributes tab
Select the Radio Button "To All Languages".
Now you can use smartforms in any languages.
Please Go through the link for further reference:
URGENT : Converting Smartform into different languages
Re: Multiple Language Support in Smartforms
Hope this will help you.
Regards,
Dhanalakshmi L -
Hi Experts,
i developed a smartform for invoice printing , i used in smartform do not translate option for restricting translations to other languages. But still i am getting in other languages. how to solve this issue?
Thanks & regards,
Satheesh .hi,
are you using driver program ,
if not please use the code in your sf source code. -
New style added to copied Smartform, Translation Style Issue
Hi Everyone
I copied an existing smartform to another one where in I had to change the style used in the smartform to another style.
But I am not able to change the style used for translations maintained in se63.Any Suggestions??
Please help!!Hi,
When u copying the smarform from on form to another form at same tiem we have another optione is there style copy that style into another style.
STEP1:GOTO-SMARTFORM-SELECT 2ND RADIOBUTTON----GIVE TO STYLE NAME-COPY THE STYLE INTO ZSTYLE.
Then u can use that style.
Regards,
muralii. -
Regading Smartform Translation
Hi All,
There is a requirement in our project where i need to translate smartforms into different langugages. I am logging into SAP system with corresponding language and translating them. So for translating into turkish language when i am trying to logon into SAP system with 'TR' language it was giving me an error like 'Select one of the installed languages' which means Turkish language is not installed in our system.Is there any other way to translate into turkish languge?
Regards,
Lakshmi.YI dont think so u can translate into non installed languges
You have an option for smartform while creating if the radio button translate into all languages is check or not..
if it is checked then we can transalate into all the languages in which system was installed... you will get a F4 help while translation with all the languages which your system has , just check if you have turkesh language in it.
check table T002C for all the Possible langugues in sap
table SMLT for list of installed languges in SAP.
Let me know if you need further info
Regards
Satish Boguda -
Smartform translations deleted when activating smartform
I made some changes to a particular smartform. Problem is that when i activate these changes, all translations (done via SE63) are deleted. Is there any way to prevent this, cause i don't feel like translating the smartform every time i change something?
thank you.Hi souji,
Example: If you want to translate smartform then steps are:
Step1 :
T/Code > Smartform>Global Settings -->genreal attributes Tab > Set flag (Radio Button)transaltionTo all languages/ Restricted languages
Please set this flag.
STEP2:
Translation:
Use T/code SE63>Translation(Menubar)>R3 enterprise> Other Long Texts>select " SSF"-->Enter Smartform name and from language and destination language.
STEP3:
Transporting translations :
Please execute the following program for transporting translations : RS_LXE_RECORD_TORDER
Target language = * or Target transalation lang.
Object type = SSF
Then Press Create Transport Request button. Create Request.
Then include all your translations to that request.
I hope this will solve ur problem.
Please check & Let me know.
Regards,
Raj. -
Smartform Translation using SE63 returns Error 'Incorrect Code Page'
Hi,
I have created a smartform in english & want to translate to Language IT, FR, DE.
I am able to translate it using SE63 for DE but unable to translate to IT, FR.
The error in status is <b>'Incorrect Code Page'</b>.
Language Attribute is set to : Translate to all Languages.
In SE63 the Source Language: EN, Target Language: IT
The Languages installed in the system is EN & DE only.
My questions on this issue:
1. Is it required the language fonts for IT & FR be uploaded & then the Translation in SE63 work fine ???.
2. Is some other parameter needs to be set.
Rgds
VincentIf you need to translate the Smartform to any target language the Target Language must be intalled in the SAP System. The error occurs because IT, FR is not installed in the SAP System.
Installing the Language Code pages will solve the problem.
Hope That Helps
Anirban M. -
Smartform translation in SE63 is deleted after activate the form
Hello together,
I create a smartform and after activation I go to SE63 and translate this form to english.
After that I go back to the form an activate it again.
Now than all translations are gone !!!
Is that the normal behavior in SAP or is it my fault?
Thx ThomasHi ,
You have to be very careful when transilations....
follow the steps in this manner
1)VERY IMPORTANTLY NEVER OPEN AND ACTIVATE THE SMARTFORM WHEN YOU ARE IN SE63 .COME OUT OF THIS AND ACTIVATE THE FORM OR MAKES CHANGES ,WHAT I MEAN IS OPEN THE SMARTFORM WINDOW ONCE YOU COME OUT OF TRANSILATIONS
ITS SAP BEHAVIOUR ...NOT OUR PROBLEM.......
I FACED THE SAME BEHAVIOUR AND COULD RECTIFY
THIS ONLY BY FOLLOWING STEP 1.
PLEASE GIVE ME POINTS IF THIS IS HELPFUL. -
Reg : Smartform translation
Hi,
In our smartform we are trying to print this French text mise en uvre , but Adobe is having problem in reading this special character " ", so it prints as # .
Please suggest some solution to overcome this .
Thanks & Regards,
Keerthi vasan.M
Edited by: keerthi vasan on Mar 17, 2008 10:34 AMhow it is done please explain
I have got the same problem -
Transport Request for SE63 Translation of Smartforms
Hello,
In my company we use Solution manager through which transport requests (workbench or customizing) are generated.
All these TRs are assigned to some project.
My requirement is when i translate smartform through SE63 it doesn't ask for request. To transfer form in TR separate tcode is there SLXT. Using this tcode we can transfer translations in new TR. But we cant use existing TR, and TR created using SLXT is not assigned to any project from Solman so cant release to LXQ. So i need to take help of BASIS person and it takes long time and approvals to transfer translation form from new request to existing .
Request solution for this.Hi Sachin,
You can manually create TR using SE09 / SE10. and include your object inside it. For Smartform translations object type should be SSFO and program ID should be LANG.
Hope this helps.
Best Regards,
Archana -
Invalid codepage error for translation using SE63!!
Hi Friends,
I have a problem with Smartform translation. I have a smartform in English , I have to have some of the hardcoded texts to be in Russian. I have the Russian translations for the same. In the attributes of the form I have made sure it allows tranlsation to all languages. But when i got o SE63, and give the smartform name and give source language as English and Target language as Russian, and click on edit, I get a message "Invalid codepage for language Russian".
Please help me out if any of you have any idea. Would be happy to award points.
Regards
VeenaNote russian fonts are not loaded in your system, inform the basis, they will help you to sort it out.
regards,
Sairam
Maybe you are looking for
-
Continue beep while installing leopard, kindly help to fix this problem and it took many hours only gray screen and apple logo it didn't proceed the reboot
-
HP Officejet Pro 8500A Plus AC Power adapter failed. Where to buy?
My AC power adapter failed. Where can I purchase a new one in Doha?
-
I want to connect an iPhone 4s to a lightning connector
I have an iPhone 4s and I would like to connect to a docker which has the lightning connector. Does anybody know if there is an adapter that allows to do this?
-
How do I turn the walking man off?
I'm doing many edits in in the arrange window while extremely zoomed in and don't want the "walking man" to be enabled. I turn "him" off, but every time I hit play, "he" turns on again, which creates Logic to scroll.... which I do not want.... I can
-
I've tried to update AppleTV twice. After about 1 hour in step 1 "preparing for update" it stops and says didn't update. Everything works fine except itis not updated. Any tips on what to do?