Smartform window-issue

Hi,
I have to work with smartforms. So that I have a small issue.
I need to design 2 pages with certain no of windows.Can anyone post when and why I have to assign page2 as next window to page1.
Could anyone explain indetail about the significance of this.
Thanks,
G Kumari.

Hi,
Thank u very much for ur kind reply. But still I need some clarification.
Suppose if there're 3 pages which're entirely different. So, Could u plz kindly reply when I have to assign each page as next page to the previous pages. Also first page has large amount of data which may overflow.
I am waiting for ur reply.
Thanks,
G Kumari.

Similar Messages

If Condition in Smartform - window text- without program lines

Hi,
I have faced one problem in smartforms. In smartforms i have a window (main.) It has five lines. For Fifth line only i need to check one condition. if it is true then print the Line otherwise i need one Blank line to print.
How i write if condition in smartforms window - text.
Mahesh.

Hi Mahesh,
You need to create and alternative node and put your text into that. An alternative will check a condition, and process one of two nodes depending if it is true or false. Based on your condition, on true you can have your current text element and on false a text element containing a blank line.
Regards,
Nick

PDF-File in Smartform Window

Hi Experts,
is there any chance to include a pdf-file in a smartforms window? We don't want to attach a pdf-file as second page but need to show the content of a pdf-document in a window.
Regards
Nicola

IMO, You have the option not to display the Smartform, but out of Smartform's OTF, you can convert it to PDF and display it in the custom screen...
Hope this gives you an alternative.
Thanks & regards,
Hadiman

Smartform window borders not appearing in dot matrix printer Epson FX-1170

Hi all. I have a smartform with boxes (made out of windows and its borders) and texts inside those boxes. In the print preview, it shows the window borders. However, when the actual printout comes, the window borders do not appear. I have tried to change the 'output options' of the windows - I tried using millimeters, centimeters, point, lines, as well as inches, for the unit and also tried changing the width, but it still doesn't appear. Has anyone encountered a similar problem with dot matrix printers? Please help.

Hi,
the dot-matrix printers cannot "draw" lines and pictures, so, it is not capable of drawing the vertical and horizontal lines you have defined in the smartform windows. I think that you need to write the horizontal lines using the '-' or '_' characters but I am not sure about the vertical ones. Of course, as you realize, this requires big development effort.
Regards,
George

AppleMobileDeviceHelper Crash on Mac - forums only talk about this being a windows issue

AppleMobileDeviceHelper Crash on Mac - forums only talk about this being a windows issue
It happens on my iMac with my iPhone

I noticed several permissions changes after the last install of iTunes.
Launch Disk Utility (Applications > Utilities > Disk Utility) and run the permissions repair routine on your hard drive. Then run verify disk. If any error is reported by the verify disk routine, restart your computer while holding down the Shift key. This will boot you into Safe Mode. The restart will take longer than normal, as diagnostic and repair routines are taking place. When the Finder shows up, restart normally. Then try your CD again.

Dynamic smartform window

Can we define dynamic size window in smartform
window could be any window ( not only main window).

Hi Savita,
Welcome.
It is not posiible to have dynamic updations on windows as the field to size them are strictly numerical and does not accept variables.
But if you want you can have same windows in more than one page with different sizes. But for main window once the width is defined it will remain constant for all windows only you can alter the height.
Regards,
Amit

My Windows issues are fixed! No more Scratchy, Skipping, Noisy sound!

This fixed my Windows issues! No more Scratchy, Skipping, Noisy sound!
1. Go to CONTROL PANEL.
2. Double click QUICKTIME.
3. Choose the ADVANCED tab.
4. Under VIDEO, uncheck ENABLE DIRECTDRAW ACCELERATION.
5. Also under VIDEO, choose SAFE MODE (GDI ONLY)
6. Select OK. (Or APPLY if you wish).
XP SP/2
NOTE: I no longer have sound problems even if the processor is 100% due to other applications running.

Well, I must rescind my previous enthusiasm. Yesterday I could not make the noise reappear after following the instructions I posted. I ran graphics-intensive applications. I ran cpu-hog programs. Nothing caused the the noise to come back.
Today, as you have probably guessed, it's back. Not as frequently, but still back.
I did notice one interesting thing. I was taking screenshots of the Windows task manager this morning try and determine if I saw any pattern to the noise. I pasted them into a light-weight viewer (Polyview) that I use when I just want to crop something and don't want to wait for Photoshop to come up.
1. Take the screenshot.
2. Paste into Polyview.
3. Noise stops.
4. Take the screenshot.
5. Paste into Polyview. Immediately the noise comes back.
6. Screenshot and Paste again. Noise stops. etc.
This at leasts suggests that display of graphics has something to do with the issue. Perhaps the video card?
Oh, well, at least the situation is tolerable now.

Smartform-Footer window issue

Hi Experts,
My smartform-footer contains some text like "company name"(A). I have changed my Smartform footer data from A to B.
When i execute the smartform directly it is showing the output properly.
But when i called this smartform in my program and execute, it is displaying output as "A" instead of "B".
Footer contains only simple text data.
Thanks in advance.
BR,
Lokeswari.

Hi,
I hope you have changed in same language which you are running smartform.
The text are language specific.
please use SSF_FUNCTION_MODULE_NAME rather than hardocing rather than generated FM.
Hope this will help.
Dhiraj.

Smartform - Loop issue not printing correctly

Hi,
In smartforms -Main Window - I created like this
1.Loop Statement - This will loop - ITAB1
TEXT statement - ITAB1-ADRNR - (prints the address)
within the loop
ITEM_DATA (item data) table. - This will Loop ITAB2 - where ADRNR = ITAB1-ADRNR
This supposed to put line items which are having ADRNR from ITAB1
But my program is printing in wrong way..
it is printing
ADDRESS1 - ITAB1-ADRNR - correct
ITEM DATA - from ITAB2- related to ADRNR (if it has only 1 record) - correct
ADDRESS2-ITAB1-ADRNR - correct
ITEM DATA - from ITAB2 - where ADRNR = ITAB1ADRNR - if this condition satisfies more than 1 record
supposed to print all the records - but instead it is printing always the first record - wrong
Ex- if 3 records has the same ADRNR of ITAB1 in ITAB2 - it is actually printing 3 times the first satisfying record - Wrong
Can anyone please tell me what is the issue?
Thanks for your time.
Kevin

Hi,
I created like this..
ITAB1 - complete data
ITAB2 - unique records based on ADRNR
1. LOOP ITAB2
Print Address - ITAB2-ADRNR
ITEM DATA(header and line items)
I have given table name in DATA loop section
- loop ITAB1 - where ADRNR = ITAB2-ADRNR
But in item data it is printing the same line item repetedly .
Any comments?
Thanks for ur time.

Smartform Implementation issue for the report RFKORD50

Hi,
I have a requirement to implement a smartform for FI Invoice.
This smartform should be configured in OB96 for the print program RFKORD50.
Currently the SAP Script F140_DOCU_EXC_01 has been configured for Standard print program RFKORD50.
This SAP Script should be replaced with Smartform. But the issue is the report RFKORD50 is designed to
call only a SAP Scrip. Is there any better way to trigger the Smartform other than modifying the standard program?
Thanks,
Sailaja.A

Hi,
One of the very tough task, when it comes to migrate a script into Smartforms .. With a satndard print program ..
You have a option on samrtform screen , just to migrate a Sapscript into Smartform .. But it is just a migration of Layout.. means just creation of WINDOWS and pages.. All the elements and text node creation still you need to do ..
But one of the major challenge is to Customize your print program..
So i will suggest you to create a Z copy of RFKORD50.. as print prgm .. Then you can feal better
Now keep all the data selection part as it is .. collect it in different structure, then call your samrtform..
and before calling your smartform, prepare your layout ..
Very Imp suggestion, try to work on small small task.

Smartform DINA4 issue

Hi Expert,
I am working on the smartform and got the below issue. In my case, I am creating a form in A4 size (210mm X 297mm) with the below parameters:
Left margin: 2.5 cm
width: 18.5 cm
But when I run the smartfrom, I found that the right margin is still 4.5cm. I have no idea why and don't know how to change it.
Please help
Thanks a lot,
WF

Hi William,
Just for check,
Window has width and Template has width both have to be same i.e., 18.5.
Could you check by clicking on template and then on details with arrow mark and then check width.
I am telling you this because of:
William Wrote:
>Yes, I did. In my case, the window width is 21cm, left margin is 2.5cm and width is 18.5cm.
Also check whether your printer can print a width beyond 14 cms.
BR
Dep
Edited by: DeepakNandikanti on Aug 16, 2011 1:24 PM

Smartform Pages issue

Hi All,
I have a strange issue on Smartform Pages,I have 4 pages in the smartform and i need all pages should be printed one after another,
for that i have selected in GENERAL ATTRIBUTES next page as subsequent page,
Eg:
FIRST PAGE --> SECOND PAGE->THIRD PAGE->FOURTH PAGE and so on .
but when i execute layout is displaying only 2pages,if i change the sequence also 2 pages,
just to check i put command in the main window and in that i gave the page names even though always two pages.
did i miss something?or this is an issue with some other issue like GUI etc....
Please let me know your suggestions to resolve this.
Thanks
Surendra

Hi Vara,
By default there will be a value set by the administrator for the number of pages you can view in the spool. So to me it looks like this value is set to 33 in yoru case. You can go to setting from the same screen and change thsi setting to display all pages. But beware that this may take a long time some times and also give you a dump at times.
-Guru

Photoshop CS2 and windows issues! help!

Hi, I'm working with someone who is having issues with Adobe Photoshop CS2 among other Adobe problems. The problem is that after Photoshop is loaded, the interface is very messed up. You can't open a file because if you go to menu -> file nothing happens. If you try to create something new, most of the buttons will be invisible in the option for sizes. The program simply becomes unusable. After a restart, the program will work properly for a short period of time and being to behave oddly again. On loading Photoshop, windows gives an error beep but the program loads anyways and no error window comes up. This happens on illustrator as well as indesign. I have uninstalled everything and removed all shared files that adobe uses and reinstalled everything from scratch, the same problem happens. This only started happening recently.
OS is XP pro SP3.
I am about to wipe the computer and start from scratch but I would rather not have to do this if there is another solution!
Please help! Thank you!

No, it's a standard U.S. keyboard and the language is set to english. I believe the software is up to date.
It doesn't freeze when you click on the menu, it just refuses to pop open a window when you try to open a file. Also, many of the option boxes in some of the windows in photoshop are invisible. This only happens after the computer has been on for a short while. Right after a reboot, you can open photoshop fine... until it stops working.

Opening a form in a new window issue

Hi..
I have this requirement where I have this page(say XYZPG.xml) which contains a table which is auto populated based on a particular setWhereClause and all this happens in the processRequest as the page loads.
This page opens on clicking a button in a previous page from where all the parameters for the setWhereClause is sent using fireAction.
Each Row in the results table in XYZPG has a "detail" button which opens another page in a new window using _blank in the Target Frame.
The issue is that when Iam clicking the "detail" button,the new form opens in the new window and after closing the form that opened in the new window when I start to perform any action in XYZPG a null pointer is encountered in the processRequest while trying to fetch the setWhereClause parameters.
Please help in this issue.Its urgent.
Thanks

That's because when you close the child window, control returns back to parent form's processRequest. Which version of EBS you are working on? OAF has in-built popup windows feature supported on latest EBS versions which is very useful on many occasions as it has good features like popup closing automatically when a submit button is clicked etc. Check JDev user guide and see if you can use popup windows for your project. If not, you have to capture the event in processRequest and perform required actions again.
Thanks
Shree

HP Pavilion Elite e9280t Desktop PC power on/start windows issue

HP Pavilion Elite e9280t Desktop PC, Windows 7 Pro. When powered on (using the power switch), the blue power light and amber hard drive lights on the front illuminate, but monitor shows no signal and the keyboard lights do not come on. F10 on the keyboard doesn't bring anything up on the screen either. Sounds like there is hard drive activity, but the amber light does not flash. If I put a bootable dvd in the drive, it appears to read the dvd, but does not boot from it (nothing appears on the monitor.) Monitor, keyboard and mouse have been verified operational. Hard drive data appears to be intact and have verified 12v and 5v operational from power supply. Haven't found a place to verify 3v power. Depressing the power switch does not turn the computer off, only way is to unplug the power cord. This sympton happened a couple of weeks ago, but after several power cycles, it booted fine and worked for a while. Not this time, though.

HI JIMINFL:
How was your weekend, I hope it was super!
I understand that when you boot up, you get a blank screen. You also said that you know the keyboard, mouse and monitor are working. I am sending you a link to a document on "Monitor or TV is Blank after Starting the Computer" click here. I am also sending "HP Hardware Diagnostics UEFI" click here to test for hardware failures. Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Smartform window-issue

Similar Messages

Maybe you are looking for