Smartforms and Totals

Hi all,
Im working on Voucher printing and have this problem.
while displaying account numbers and their debits and credits for each document number if the number of records exceed one page then the total and the footer has to be printed on the final page.
I've used the conditions at paragraph end, after main window. but they dont work.
Surprisingly in one of the form that Im working the condition at paragraph end works fine, but in the other form it is not.
Do let me know how to go about this.
URGENT....
Regards,
Naren

hey satish,
I did the same, and as I've mentioned you this is very peculiar. I've almost a similar form but with some minor changes and this is working fine with all the conditions.
But I dont know why this is creating a problem.
Regards,
Naren

Similar Messages

Smartform with multiple Headers & Respective Item Details and Totals?

Dear All,
Appreciate if anyone clarify my doubt.
My requirement is to develop a smartform for billing with multiple headers & respective items and totals. For more clarity I'm explaining below.
                    Header Section1
variable1          variable2          variable3          variable4          variable5
     variable6          variable7          variable8
variable9          variable10          variable11
Item Details1
s no     vebeln     verpr     col4     col5     col6
total                    123.21
total in words -
               value     321.21
               value     982.98
               value     some value
footer details
                    Header Section2
variable1          variable2          variable3          variable4          variable5
     variable6          variable7          variable8
variable9          variable10          variable11
Item Details2
s no     vebeln     verpr     col4     col5     col6
total                    123.21
total in words -
               value     321.21
               value     982.98
               value     some value
footer details
                    Header Section3
variable1          variable2          variable3          variable4          variable5
     variable6          variable7          variable8
variable9          variable10          variable11
Item Details3
s no     vebeln     verpr     col4     col5     col6
total                    123.21
total in words -
               value     321.21
               value     982.98
               value     some value
footer details
Is this possible using smartforms?
Now they are using a classical report and takes printout in preprinted stationery.
requirement is to develop a smartform for this. there is a selection screen for the print program which accepts billing docs.
Thanks,

Rajiv,
Actually for your case you don't need a table inside the Main Window.
1.) First Populate all the data(header + item) in an internal table in the print program itself.
2.) Pass this internal table to the smartform.
3.) In the smartform give exact dimensions to the main window.
4.) In the Main Window Use a Loop on this internal table.
5.) Create a template for the header data giving the exact dimensions.
6.) Create another template for the item data giving exact dimensions to the template.
7.) If there is pre-printed text between these templates, insert a text element between these templates. This text element will have nothing just give a paragraph format to it. Go to smartstyle, create a style in which create a paragraph format setting line spacing parameter of this paragraph format of the same size as that of pre-printed text.
8.) Only 1 page is required since Loop statement will print the second record on the second page if the dimension of templates are exact.
9.) Dimensions you can easily measure from the pre-printed form.
<removed by moderator>
Edited by: Thomas Zloch on Mar 6, 2012

How to do SUBTOTAL AND TOTAL in Main Window of SAPSCRIPT.

Hello Friends,
I am modifying standard SAPSCRIPT of packing slip. My client wants a subtotal and total in Main Window of Script for Eg. (They want Material Number wise Subtotal and finally Grandtotal at bottom in Main Window)
Now i got stucked up here how to do it ?
here is my sample code.
LOOP AT XVBPLP WHERE VENUM = SHENR.
IF XVBPLP-POSNR IS INITIAL.
    Versandelement
      PERFORM PACKING_TREE USING XVBPLP-UNVEL.
    ELSE.
    Lieferposition (Anteil)
      VBPLP = XVBPLP.
CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        ELEMENT = 'DELPOS'.                     "Main Window call
clear vbplp.
ENDLOOP.
Pls guide me for the same.

HI,
For the Line items, put a ELEMENT in the Smartform, and you will call this with in the LOOP and ENDLOOP, so here with in the LOOP count the TOTAL value.
then create new element after the Line item Element, and call this Element after the Line items prints,
/E LINE_ITEM
&1& &2 & &3&     " This will be in the loop and you need to caliculate the totla here
/E SUB_TOTAL.
&SUb_TOTAL& " After all the line items pritns then call this Element
Regards
Sudheer

Disadvantage of Smartform and Advantages of SAP script

Good day Gurus.,,
Can anyone please tell me the Advantages of SAP Script over Smartforms and
Disadvantages of Smartforms over SAP script.
Also is there any special scenario where only sapscript could be used but not Smartforms.
Please enlighten me....
Many thanks

hi,
Smartforms are came into picture in 4.6 version to overcome the disadvantages of scripts.
Disadvantages of Scripts
1.scripts are client dependent.
2.we can't add colors in scripts.
3.It is paragraph dependent.
4.In this main window is compulsory.
5.mutiple page formats are not availble.
6.we can't add background pictures.
Adavantages of smartforms
smartforms are advanced versions of sap scripts,
1.smartforms are client independent.
2.we can add colors in smartforms.
3.It is not a paragraph dependent.
4.In this main window is not compulsory.
5.mutiple page formats are possible.
6.we can add background pictures.
7. it will generate one function module when activating it.
8. total code can be written in smartforms itself.
sap scripts used to use in previous versions if they dont upgrate current version of sap then they have to use sap scripts because smartforms are not available in the previous versions.

Steps to develop smartforms and sap scripts

hi experts,
I want to learn smartforms and sapscripts from the scratch step by step. i have gone through few threads, but iam not clear with the declarations.
thanks in advance
maaya

Maaya,
Go thru these links...
SAPScripts
Link for SAP Scripts (step by step procedure)
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Create_A_SAPSCRIPT_Form/How_to_Create_SAPSCRIPT.html
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Subtotals - Check the link...
Re: Subtotal with Table Node in smartforms
Smarforms
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
SmartForms : some links
http://www.sapgenie.com/abap/smartforms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://help.sap.com/saphelp_46c/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
http://www.sap-img.com/smartforms/smart-001.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sap-img.com/smartforms/smart-002.htm
http://www.sapgenie.com/abap/smartforms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sapgenie.com/abap/smartforms.htm
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
http://www.allsaplinks.com/smartform_example.html
http://www.sap-basis-abap.com/sapsf001.htm
Smart Form PDF Link
http://help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://sap.ionelburlacu.ro/sap0/sapsf001.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/16/a369b1800e4bdda978ee0fe3b7bd2c/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-img.com/smartforms/smart-001.htm
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
Debugging of a subroutine pool.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
SRIPTS
http://wiki.ittoolbox.com/index.php/Sap_script#7.6.7.09Space_Compression
SCRIPT OUTPUT TO PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49e15474-0e01-0010-9cba-e62df8244556
Reward if helpful,
Karthik

Smartform and Idoc

Hi experts,
I am new in smartform and IDOC. if you can give me documents from which i can update my knowledge pl give it to me.
thanks in advance
Kapil

hi,
go through the links
Start with this.Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
Thanks,
Sankar M

Internal table in Excel output with Header and Total

Hi All,
I have a selection-screen of a report where there is option to specify the path of a file to be stored in local PC. This Report gives output in ALV format which displays header and total of columns.
Now, the requirement is, when the user specifies a path for the file in selection screen it should download in the specified location with header and total row into an excel format.
The issue is, I have the internal table with data without total and header row and the total is getting displayed in the screen through ALV feature. I am not sure, how to give the same output in downloaded excel with header row and total as it is displayed on screen.
Please let me know, if you have any suggestions.
Thanks & Regards,
Anshumita.

try using TOP OF PAGE event and write the number of records in the header part.
hope this will help.

Display 6 line items and total in main window

Hi,
I want to display only 6 line items in main window( on first page and also total of the main window of first page), and consecutively in all the apges i want to display only 6 line itms and total in each page of main window, how to write logic for this.
Thanks,
Donlad

Hi r u talking about Snmartform if yes
Let us take the page you are using as PAGE1, you can achuve this using the Command Node. call the same page after 6 items as follows
1.create Table.--->Main area , Header and footer.
2.Declare a variable V_count type sy-tabix.
a.Now click on the table tab>Main Area>right Create>Command (insert a command node after the Line type you r using to print the data), in this COMMAND node give the condition V_COUNT = 6. GOTO>PAGE1 (it maens you r triggering the new page after the 6 lines.
b. after this command noder insert the Program lines heate increase the value of V_COUNT.
Maintain another variable the use that for page totals...
total can be doneautomatically by using the TABle-->CALCULATION TAB.
let me know if you more clear info, iam sure u r problem willbe solved.

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

Do not include some lines in Subtotals and totals in ALV

Hello All,
I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
As of now I am using ALV grid display and doing the sums by
l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
<b>Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have</b>.
I will be thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.

Hi,
see this code,
Complete code for the ALV grid example
This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
The example shows:
How to setup the ALV grid
How to ste focus to the grid
How to set the title of the grid
How to allow a user to save and reuse a grid layout (Variant)
How to customize the ALV grid toolbar
Refresh the grid
Set and get row selection and read line contents
Make and exception field (Traffic light)
Coloring a line
Steps:
Create screen 100 with the ALV grid. Remember to include an exit button
Add a change button to the ALV grid toolbar
Create screen 200 the Change screen
The screens:
The code:
   REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
   TYPE-POOLS: icon.
   TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
   CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L   I N T E R N A L   T A B L E S
   *DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
   TYPES: BEGIN OF st_sflight.
           INCLUDE STRUCTURE zsflight.
      Field for traffic light
   TYPES: traffic_light TYPE c.
      Field for line color
   types: line_color(4) type c.
   TYPES: END OF st_sflight.
   TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
   DATA: gi_sflight TYPE tt_sflight.
G L O B A L   D A T A
   DATA: ok_code         LIKE sy-ucomm,
    Work area for internal table
         g_wa_sflight    TYPE st_sflight,
    ALV control: Layout structure
         gs_layout       TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
   DATA:
     go_grid             TYPE REF TO cl_gui_alv_grid,
     go_custom_container TYPE REF TO cl_gui_custom_container,
     o_event_receiver    TYPE REF TO lcl_event_receiver.
   DATA:
Work area for screen 200
     g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
   DATA:
Internal table
     gi_index_rows TYPE lvc_t_row,
Information about 1 row
     g_selected_row LIKE lvc_s_row.
C L A S S E S
   CLASS lcl_event_receiver DEFINITION.
     PUBLIC SECTION.
       METHODS:
        handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING
            e_object e_interactive,
        handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
          IMPORTING e_ucomm.
   ENDCLASS.
      CLASS lcl_event_receiver IMPLEMENTATION
   CLASS lcl_event_receiver IMPLEMENTATION.
     METHOD handle_toolbar.
Event handler method for event toolbar.
       CONSTANTS:
Constants for button type
         c_button_normal           TYPE i VALUE 0,
         c_menu_and_default_button TYPE i VALUE 1,
         c_menu                    TYPE i VALUE 2,
         c_separator               TYPE i VALUE 3,
         c_radio_button            TYPE i VALUE 4,
         c_checkbox                TYPE i VALUE 5,
         c_menu_entry              TYPE i VALUE 6.
       DATA:
           ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
       CLEAR ls_toolbar.
       MOVE c_separator TO ls_toolbar-butn_type..
       APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
       CLEAR ls_toolbar.
       MOVE 'CHANGE'        TO ls_toolbar-function.
       MOVE icon_change    TO ls_toolbar-icon.
       MOVE 'Change flight' TO ls_toolbar-quickinfo.
       MOVE 'Change'        TO ls_toolbar-text.
       MOVE ' '             TO ls_toolbar-disabled.
       APPEND ls_toolbar    TO e_object->mt_toolbar.
     ENDMETHOD.
     METHOD handle_user_command.
Handle own functions defined in the toolbar
       CASE e_ucomm.
         WHEN 'CHANGE'.
           PERFORM change_flight.
       LEAVE TO SCREEN 0.
       ENDCASE.
     ENDMETHOD.
   ENDCLASS.
S T A R T - O F - S E L E C T I O N.
   START-OF-SELECTION.
     SET SCREEN '100'.
   *&      Module USER_COMMAND_0100 INPUT
   MODULE user_command_0100 INPUT.
     CASE ok_code.
       WHEN 'EXIT'.
         LEAVE TO SCREEN 0.
     ENDCASE.
   ENDMODULE.                 " USER_COMMAND_0100 INPUT
   *&      Module STATUS_0100 OUTPUT
   MODULE status_0100 OUTPUT.
     DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
       l_layout TYPE disvariant,
Utillity field
       l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
     DESCRIBE TABLE gi_index_rows LINES l_lines.
     IF l_lines > 0.
       CALL METHOD go_grid->set_selected_rows
           EXPORTING
             it_index_rows = gi_index_rows.
       CALL METHOD cl_gui_cfw=>flush.
       REFRESH gi_index_rows.
     ENDIF.
Read data and create objects
     IF go_custom_container IS INITIAL.
Read data from datbase table
       PERFORM get_data.
Create objects for container and ALV grid
       CREATE OBJECT go_custom_container
         EXPORTING container_name = 'ALV_CONTAINER'.
       CREATE OBJECT go_grid
         EXPORTING
           i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
       CREATE OBJECT o_event_receiver.
       SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
       SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
       l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
       gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
       gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
       gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
       gs_layout-info_fname = 'LINE_COLOR'.
       LOOP AT gi_sflight INTO g_wa_sflight.
         IF g_wa_sflight-paymentsum < 100000.
      Value of traffic light field
           g_wa_sflight-traffic_light = '1'.
      Value of color field:
      C = Color, 6=Color 1=Intesified on, 0: Inverse display off
           g_wa_sflight-line_color    = 'C610'.
         ELSEIF g_wa_sflight-paymentsum => 100000 AND
                g_wa_sflight-paymentsum < 1000000.
           g_wa_sflight-traffic_light = '2'.
         ELSE.
           g_wa_sflight-traffic_light = '3'.
         ENDIF.
         MODIFY gi_sflight FROM g_wa_sflight.
       ENDLOOP.
Grid setup for first display
       CALL METHOD go_grid->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_variant       = l_layout
                   i_save           = 'A'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gi_sflight.
   *-- End of grid setup -
Raise event toolbar to show the modified toolbar
       CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
       CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
     ENDIF.
   ENDMODULE.                 " STATUS_0100 OUTPUT
   *&      Module USER_COMMAND_0200 INPUT
   MODULE user_command_0200 INPUT.
     CASE ok_code.
       WHEN 'EXIT200'.
         LEAVE TO SCREEN 100.
         WHEN'SAVE'.
         PERFORM save_changes.
     ENDCASE.
   ENDMODULE.                 " USER_COMMAND_0200 INPUT
   *&      Form get_data
   FORM get_data.
Read data from table SFLIGHT
     SELECT *
       FROM zsflight
       INTO TABLE gi_sflight.
   ENDFORM.                    " load_data_into_grid
   *&      Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
   FORM change_flight.
     DATA:l_lines TYPE i.
     REFRESH gi_index_rows.
     CLEAR   g_selected_row.
Read index of selected rows
     CALL METHOD go_grid->get_selected_rows
       IMPORTING
         et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
     DESCRIBE TABLE gi_index_rows LINES l_lines.
     IF l_lines = 0.
       CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
            EXPORTING
                 textline1 = 'You must choose a line'.
       EXIT.
     ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
     LOOP AT gi_index_rows INTO g_selected_row.
       IF sy-tabix = 1.
        READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
       ENDIF.
     ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
     CLEAR g_screen200.
     MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
     LEAVE TO SCREEN '200'.
   ENDFORM.                    " change_flight
   *&      Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
   FORM save_changes.
     DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
     MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
     MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
     IF g_wa_sflight-paymentsum < 100000.
       g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
       g_wa_sflight-line_color    = 'C610'.
     ELSEIF g_wa_sflight-paymentsum => 100000 AND
            g_wa_sflight-paymentsum < 1000000.
       g_wa_sflight-traffic_light = '2'.
       clear g_wa_sflight-line_color.
     ELSE.
       g_wa_sflight-traffic_light = '3'.
       clear g_wa_sflight-line_color.
     ENDIF.
     MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
     CALL METHOD go_grid->refresh_table_display.
     CALL METHOD cl_gui_cfw=>flush.
     LEAVE TO SCREEN '100'.
   ENDFORM.                    " save_changes

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

How to?? show smartform and generate pdf at the same time

hi experts,
how can i show the smartform and generate a pdf at the same time?? i have a control parameter gtotf in X and i generate the pdf but i want to show the smartform at the same time??
thx in advance

Hi...
call fm <sf function name>
exporting...
importing..
tables..
now in the outputparam set the getotf as 'X'.
call the same FM again and get the otf data.
call fm <sf fm name>

How to change font size in smartform and set layout of smartform

Dear abapers,
I want to change font size in smartform and also set the layout of smart form how can we do this.
Thank you sir.

Hi,
you can do it first you need to goto smartforms tcode there click on radiobutton 'Style'.
Give any name and click on create. Right sideyou can find character format right click on it and create a node .A pop will raise gve a 2 characterlike z1 or a1 etc click on font tab gve size and font style and click on save and activate. Use this style in your smartform you can apply what ever styles created in styles you can use it in your smartform by that smartstyle name.
When we create text in output options give your smart style name and click on general attributes . Select your text and apply the style what thse size it should be and what the font style it should be.
Goto smartforms tcode and select formpainter in application bar set layout according to your requirement.
Thanks,
venkat

At 60 and totally confused w/version . Not clue with how to use it and how to change it. My question - If a new version of i-tunes can be offered why not the older version as being a choice? Too simple or just impossible to do? I hate to drop i-tunes.

At 60 years of age and totally challenged by todays technology I find it impossible to understand i-tunes Version 11. Don' ask me to try to try go back to a earlier version ( as much as I would like to). I have read some of the advice given, as well as intended as it is, I don't understand the process. I don't want to drop i-tune but I will. I am sure my library is not as large as many others who use it but it is just as important to me. This really saddens me.
I do have two question if some one can help me. First, someone mentioned that if I go to previous restore point this might correct it. Yes or no? Secondly, if Apple can offer us a new version to download why can't they offer an older version to download. Too simple or impossible to do.

You can still drag and drop a song into a Playlist, in the same manner as before. Simply use the left-click of your mouse to select-and-hold the song (left-click-and-hold, don't release the click) and drag it to and then drop it (release the click) into the Playlist you want. (You cannot drop it into a Smart Playlist, you can only drop it into a Regular Playlist.)
... and here's a screenshot dragging the song "Lazy Orbit" into the Regular Playlist "Sat 4th June 2011". A small + symbol also appears in the drag, but it doesn't show up on screenshots. If the move is forbidden, a red slash through a red circle appears instead of the + symbol.
As for the Albums thing; in the Column Browser, right-click anywhere in the Column Browser header (see my screenshots in my previous post) and a menu appears. Deselect Albums on that menu to remove Albums from the upper Columns:
... and for the columns underneath (with the songs list etc.), right-click on that header bar and once again, deselect Albums from the menu that appears. The Albums column will then be removed from the lower columns list.
ed294 wrote:
You would think with all the complaints they are getting they would want us, the buyers, to be satisfied with there product.
Well, my advice to you is: do not think about what you think iTunes cannot do, instead, think about what you want to achieve - and then work out how to achieve it.

Maintenance view: how to read EXTRACT and TOTAL table

Hi, All,
I created a maintenance view, as stated in the documentation, there are 2 internal tables EXTRACT and TOTAL available in running environment. Now I want to read a record from the internal table by using "READ TABLE...."
In my example: the table strucutre has A, B, C 3 fields.
So I tried to use "READ TABLE EXTRACT with key A=' xyz' assigning <fs>", in this case, the syntax check shows error saying that the specified type has no structure and no component can be called.
So how can I search a row in the table EXTRACT and TOTAL by giving a field value? Is there any other way to get data from the table?
Thank you!

Hi Yongying,
I know this is an old post, but, may be this is still helpful for you or for others with the same problem.
Just add the option "CASTING" at the end of your READ statement:
"READ TABLE EXTRACT with key A=' xyz' assigning must be full typed or at least, be of the same type of the Z table from which is generated the itab EXTRACT.
Regards,
José Gabriel.

Smartforms and Totals

Similar Messages

Maybe you are looking for