Smartforms - extra page at end

i have seen various threads on this, but somehow i cannot make mine work, based on them. it appears that a COMMAND node may work, however, not for me.
i have a first page (FIRST), and a second page(NEXT), both containing the main window. the "FIRST" page's "next page" is "NEXT", and the "NEXT" page's "next page" is "NEXT". now i want to print my new page "DG", on the end of the "NEXT" page, depending on some condition.
lets forget the condition for now, just simply get the "DG" page to come out all the time.
thanks in anticipation
glen

Is it a script being called by standard program.
for eg in case of chk printing script the driver program RFFOUS_C has parameters in selection screen which could be checkmarked and hence second page or so could b eincluded or excluded.

Similar Messages

  • Print at Bottom of Page option causing extra page at end of report

    I'm using the option 'Print at Bottom of Page" in Section Expert for some invoices I'm creating.  For some reason it's causing me to have an extra page at the end of the report.  If I unselect this option, the extra page goes away.  I need to be able to have this group footer print at the bottom at the page but not have the extra at the end of the report.  This is the first time I've used this option so maybe I've missed something.  All other sections after the group footer I want printed are suppressed.  Any ideas?

    I guess I didn't have the report footer suppress, I just had it minimized in size.  I suppressed it and it seems to be fine.

  • SAP script extra page at end....

    Hi Experts,
    I am using SAP Script Form, After executing a script in output one extra page is comming. How to remove that extra page ?
    Rahul

    Hi,
       Check your main Window, may be there is blank line at the last of the main window, so check that abd remove that,so you won't get the blank page.
    If U WANT TO GET THE LAST PAGE THEN
    You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
    From SAP Help:
    This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
    Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
    /: IF &NEXTPAGE& = '0'
    Last page
    /: ENDIF
    Reward points
    Regards

  • Smartforms - Extra Blank Page in DUPLEX mode

    Hello Friends,
    I am printing my smartforms in DUPLEX page mode. Its printing fine but i am getting an extra blank page.
    Searched the forum but no luck.
    I have defined 3 pages Page1, PAGE_INST,Page2. I need to print instructions(say) on back of each page.
    I had set page1 to duplex mode 'D' and next page to blank.
    My pages flow is in the following way:
    page1>Page INST>Page2
    Page 1 & 2 have main windows and have a command to print PAGE_INST.
    Page_INST Does not has main window.
    Page1 : next Page 2.
    Page INST : Next page is Page 2.
    Page2 : is a continuation of page 1 next window is blank(or page 2)
    Its printing fine in Duplex but always there is a blank sheet in the print out at last page.
    Can someone help me how to avoid the last blank page.
    Thanks

    HI Hari,
    How to avoid a blank page at end of the page?
    Regards,
    Sravanthi

  • Extra page shown in smartform

    Hi,
    please let me know how can I remove the extra page being printed at the end of the smartform, which I have used on change of some field using an event,.
    suppose the data is getting actually printed in 3 pages,  it is showing total of 4 page and 4th page is blank in all cases ,  i just need to remove this extra blank page,
    thanks in advance
    Rohan

    hi,
    total pages used are 2 , one for main page and then NEXT PAGE
    suppose i gave input as EBELN OF 4500000128  to 4500000129
    it shows output as
    pages 1 of  4 on the intial page.
    4500000128  comprises of 2 pages in all it has 20 details
    4500000129 comprises of 1 page worth data contains 2 detail
    now in all 3 page shows all the data required..
    but the 4th page is shown and it displays a blank window [no data] fills the header though of next page but since no data is there, it shows blank main window
    the same case is repeated in all the cases, just the page number changes, but in every case extra blank page at end is shown.
    i want to remove the last page being shown
    i hope you are clear with the output i am getting

  • Invoice print extra page w/o any data in repetitive area or end of report

    I did not use Page Footer and reduced those "hidden fielded" height to 26 with checkmark for Adjust Area Height, but the invoice will print extra page with blank repetitive area and page footer, Report Header and Repetitive Header showed.
    How to remove the extra page?  
    I have another one that do not print the extra page but each page has same Invoice Total, Frt, Tax with Remittance Address that should only show in the last page.  I know this is because I put Invoice Total in Page Footer. When I remove Page Footer to End of Report area then I got extra page with no data in repetitive area or end of report.

    Hi Lily,
    i think problem be create in Repetetive Area.
    Do this in your PLD,
    ->> Open your PLD and save as a duplicate PLD (Just testing PLD).
    ->> Right Click in PLD and Choose the Display Hidden Fields in PLD.
    ->> Reduce the Height of all fields in Repetetive Area, Page Header and End of Reports.
    for example,
    ->> Select all fields including Hidden fields in Repetetive Area & Repetetive Area Footer and
    Reduce the Height in General tab on Properties Widnow.
    put the Height -> 15 and Font Size -> 10
    ->> Reduce the Repetetive Area Height and put the Tick mark in Area Height Adjustment in Format Tab.
    Try to remove all fieds(including Hidden fields) in Page Footer and Reduce the Height.
    ex. Page Footer Height -> 0
    Regards,
    Madhan.

  • Printing extra pages in smartform

    Hi All,
    i'm new to smartforms.i got an issue on invoice(smartforms).i'm getting 3 extra blank pages in smartform.how and where should i rectify that.can any one help me please.
    thanks in advance

    Hi Mr Rao & Mr Reddy,
    thanks for your prompt responses...added to the question, in the extra page i'm getting spool information.actually the program is set in background.once the invoice is issued the form is sent to printer.and in the spool it is displaying the actual pages only.its not showing the extra pages.but once it is out from the printer,i'm getting the extra pages with the spool information
    the information on the extra page is....
    user:
    host:
    class:
    job:
    these are the four lines i'mm getting on the extra page.could u please help me.
    thanks in advance.

  • How To Delete The Extra Page In Smartform Output

    Hi Friends,
    I am working wih Smarform..which displays P.O Details (Header and Item ) .
    Header Details in Template and Item Details in Table..
    I am trying to print 10 P.O ..for every P.O i kept New page command.
    So..finally i have to get 10 pages in output...instead i am getting 11 pages...
    How to delete the extra page ? Y i am getting this..
    please give helpful answers...
    Points will be given after get the answer.
    Thanks,
    Laxmi

    Hi,
    as someone else said. put the newpage command at the start.
    However with a condition that that it not happens at the first page.
    or
    Determine how many P.O.
    use a counter.
    If this counter is equal to number of P.O, then no newpage command.
    success.
    Gr., Frank

  • How to avoid extra page

    HI all,
    I am getting my ouptut in smartforms . But the problem is i am getting an extra page with logo at the end. How to avoid that?
    Here i am using only 2 windows. LOGO window and main window.
    Thanks & Regards,
    Vineel

    Check your main window and see whether there are any blank lines inside your main window... if that is not the case check whether you are using any command and calling the new-page in smartform... if yes.. goto command and un-check the tick box goto next page.
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • How to I remove the extra page in pages?

    I created a custom template in pages on my iPad2 and pages threw in an extra page at the bottom. I'm using this to send as an email newsletter, I don't want there to be an extra blank page. Anyone know how to fix this? I've tried everything I can think of.

    If using Clay's suggestion changes the formatting of the document in some way - you can try this as well.
    Sometimes word processing apps want to throw in an extra page at the end of a document because you have hit the absolute limit on the document size. I see this in Word and Pages files.
    Try increasing the document depth/length just a little bit in the file and see if that helps. But first create a duplicate file that you can mess up and not have to worry about.
    Launch Pages. Tap on the Edit button in the upper right corner and all of the thumbnails will start to wiggle. Tap on the document that you want to duplicate and then tap on the + sign in the upper left corner to duplicate the file.
    Open the copied file. Tap on the wrench icon in the upper right and select Document Setup. In the setup window - Drag the header section up a little bit and/or the footer section down a little bit and then tap Done. See if the copied document dumps the unused second page now.
    If that didn't work the first time - keep extending the margins until the second page is gone.
    Message was edited by: Demo

  • Acrobat adds extra page

    When scanning from a Fujitsu scanner, using the color document option in Acrobat 9.1.3, Acrobat adds and extra page between scanned pages so instead of getting say a 3 page document I end up with 6.  It works normally using a black and white document.  Any suggestions.
    Thanks

    Look at the scanners settings. What scanner? My fujitsu scanners default setting is to scan the front and back of the pages. The blank pages may be the back of the sheets being scanned. The B&W preference file may be set for one-sided scanning.

  • Extra pages in new printer

    Hi Experts,
    We have installed a new HP printer (devise type HPLJ5SI) . When we print the work order or anything related, at the end of the printing, there are 2 extra pages are coming. If we use any other printer, it works fine.  Can anyboty help, to resolve this issue? Is this related to printer settings or something else? Really appreaciate your valuable suggestions.
    Thanks, RPC.

    Hi,
    This is a issue which occurs of a missing parameter in printer settings in SAP. Ask your Basis person to check for that missing parameter.
    I also faced the same issue but I have lost the parameter name and value.
    Regards

  • New page after end of record

    Hi i'm using asp.net 2.0,VS 2005 and CR by default comes with VS 2005.
    I read the records from DB and bind into CR for 10 pages. It's displaying records at 10 pages but the 11th page has created and nothing is there. I dont want to create the extra page after records end.
    How to solve this?

    On crystal report, open the section expert.  Go to the section that states "New Page After" and click on the X-2 button next to it".  In the formula editor, type Not OnLastRecord.  That will tell the report not to go to a new page on the last record.
    Good Luck
    Cathy

  • Adding an extra page

    Hi All,
    i am new to Adobe Designer and to this forum hoping somebody has a solution for this ,
    i am currently designing a form which is dynamic in nature, as i said the form is dynamic in nature,it could go on to print n no of pages.
    Now the issue is i need to add an extra page if the pages end with an odd number to make it even .
    bottom line all my pdf's should be ended with an even no.
    is there a way that this can be done
    Thank you all.
    Young

    I don't have a solution for you because I've never done a single line of preamble coding but if it is thinking that "mod" is a variable instead of an instruction to divide and provide the remainder then the preamble entry is constructed incorrectly. I don't know what the first @ symbol is for but, generally, having the @ symbol in front of some text (as in @mod) is making a reference to a variable - in this case a variable (or data field) with the label of "mod".

  • Requirement For Adding Extra page in Final Report

    Hi,
    I am generating a marketing report for the customer. All these reports will be 3-4 pages with last page.
    For certain type of marketing code I need to add a last page for customer approval with some notes.I can not have it as a last page in the same flow as it may not print summary on last page.
    How can I add extra page at the end of report based on conditions.
    Regards
    -Ashutosh

    You may create the last page as subtemplate and call it conditionally. Like
    <?template:lastpage?>
    All thee last page stuff goes here
    <?end template?>
    <?if: condition_to_have_the_last_page?>
    <?call:lastpage?>
    <?end if?>

Maybe you are looking for