SmartForms: Image is printed backwards.

Hi guys,
I have a report in smartform in which I'm printing a company's logo, and sometimes the 'Logo' is printed backwards.
What could be happening?
Thanks!
Albio.-

Hi
try see this post
Re: logo printing reverse
I hope it's very usefull
Max
Message was edited by: max bianchi

Similar Messages

How do I print backwards, for T-shirt iron-on paper?

I have been searching for a method to print backwards. I have T-shirt iron-on paper, but to make it work, the characters must be printed backwards, in mirror-image format.
That way, when the iron-on page is used, the letters transfer to the T-shirt properly and can be read normally.
I have an HP OfficeJet 6500 E710a.
The only way I can think of is to print on a transparancy, then use the copy function on this printer to copy it backwards, onto the iron-on page.
Is there any way to make the printer actually print the characters backwards?
Thank you very much.
Alex
This question was solved.
View Solution.

I do not remember the Windows 95 beta, but I certainly may have been in the forums then. I started with computers back in the CP/M days and have been active since.
Back then I was mostly in the comp.periphs.printers and a few other newsgroups, those got killed off by spammers and I finally settled here for most of my postings.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Network shared printer printing backwards

network shared printer printing backwards from other computers but not the computer that the printer is hooked to. I have gone in and the mirror setting is turned off.........any other clues or ideas.........I have a HP Officejet J5780 All-in-one set up via a USP cord.....
Sorry problem solved, I did not know you had to sut the mirror off on every computer....I thought there was only one setting..........I got it solved.....Thanks anyway
Message Edited by J5780All-in-1 on 03-04-2009 01:39 PM

Hi ..
i am having a similar probem. i have a 3500 HP color laserjet connected to a sp3 windows xp system acting as print server.
a pc connected through netwrk has this ' backward' printing problem . i dont see any 'mirror' image setup option to turn off or on anywhere in the printer.
where should i see it ?
plz help.
gov

Image not printed in SapScript, only after page break

Hi,
I have a problem in printing an image (stored as text) in a sapscript. The image was uploaded correctly from a TIF file in tcode SE78. The image contains a signature and I need to print it at variable positions within the form. That is I need to print it in the MAIN window. The image does not get printed when a page break occurs when outputing the text element containing the picture. If the page break occurs when outputing any (other) text, the image is printed correctly (after that text).
Has anybody else encountered this problem? Could it be a sapscript bug?
Thx in advance.
Claudiu

>
> Looks like the last page is not called !!! I can see data only on one page and it shows page 1 of 1.
>
> "make sure ST_TEMP is filled with data" how do I do this ?? My program line node has the data filled in the internal table it_temp and the loop node has the data transferred to st_temp for every row. How can I debug the program lines code ??
> > Have a break <username> in the program lines. and check it_temp has data in it.
> "use a command and call the last page at end of the loop on internal table"...how to do this ?
> > like program lines there is a "command line" do a little search on SDN for more info on how to use command lines for next page.
>

Standard Smartform for label printing for packages - pls advice

Hi All,
I need help in changing a print program ie Standard Smartform for label printing for packages ?
Standard Driver program: SDPACKDR
Please provide me with the detailed steps for editing the Std Smartform according to any requirement.
Points will be rewarded promptly.
Thanks.

hi,
1. The smartform name is SD_PACK_ETIK.
2.Just copy the standard program into Zprogram and make chanes and assign in NACE with the form.
3.But,in smartform lable printing is not possible.
4.you can print barcodes.
Regards,
Kumar(Reward if helpful).

In smartform, dash(-) is printing as hash(#), How to avoid it.

In smartform, I am printing the customer address from KNA1,
In database, it is showing as dash(-)
but, it is printing as hash(#),
How to avoid it.
In debugging also, it is showing as dash(-).
Can u plz write the solution?

Hi Narendra,
"replace NO-BREAK SPACE U+00A0 to normal space
CALL METHOD cl_abap_conv_in_ce=>uccp
EXPORTING
uccp = '00A0' "(This is hex value of special char)
RECEIVING
char = lv_rep.
replace all occurrences of lv_rep in lv_eknam with ' '.
i use this to remove those spaces in record and appeared as #### in smartforms.
For your case, please pass in hex value for dash - instead.
It should work.
regards
Xiang Li

WhenI print from firefox on a Mac everything comes out 50% too light, if I save the image and print from the desktop it looks fine. No problem either printing from FF with Win7. How do I fix FF on the Mac?

My iMac runs bootcamp, so I have both OSX and win7 available. I run the latest Firefox on both as my primary browser. The printing looks like the ink is running low, but when the same image is printed from other desktop apps the printing looks fine.

Hi, Jordan -
Welcome to Apple's Discussions.
If the original drive in the newer Mac is a Western Digital, its jumpers may be set to Single, which WD drives often use when there is only one device on the bus. When a second drive is added, the jumpers on the original must be reset to Master.
OS 9's utility is named Drive Setup - you should find it in the Utilities folder on the hard drive. Run that. Select the added hard drive in the list, then select Mount Volume from the Functions menu.
You can also check with that utility to see if the OS believes the drive has been set to automount at boot. Again, select the drive in the list. Then select Volume Settings from the Functions menu - there's a checkbox in that screen to set automount (for freshly initialized drives, that's turned on by default).
Also, try running Disk First Aid (should also be in the Utilities folder). Let it have a look at the second drive, and repair anything it can.
Apple System Profiler should report the format of all drives it sees. Is the format of the drive from the old Mac stated as Mac OS Standard, or as Mac OS Extended?

White lines appear around placed images in printing.

A native Illustrator document with placed Photoshop (both CS6) images produces whites lines around the placed images when printed. The Illustrator document does not show white lines on screen. Nor does the PDF (Acrobat X Pro) generated from the IA doc show white lines when viewed on screen. When the document goes to press, the printed product show the white lines:
See upper left image and lower right image-note: other images are not affected. Both both are native Photoshop images, placed on a gradient in IA. Perhaps the PDF settings: "Adobe PDF Preset" or "Standard" are not chosen correctly? Why the white lines?

You screenshot shows a modified Illustrator Default preset with Compatability to Acrobat 4. That setting always flattens transparency which is what I would suggest avoiding first.
Note the Warnings summary alerts that transparency will be flattened.
garlic541 wrote:
2.That same initial 'Save Adobe PDF' widow allows for three settings: Adobe PDF Preset (12 choices); Standard (6 choices), and Compatibility (5 choices). Note how the window signals a Warning (Warnings: Saving this file with Compatibilty set to Acrobat 4 (PDF 1.3) requires items with transparency to be flattened.) Could this be a warning that produces the stitch lines in the actual printing?
Yes
garlic541 wrote:
After researching....
Discussion seems to indicate seeing 'stiching lines' on screen; sometimes in the designing application; or in the generated PDF. My instances are visible only in printing-in two of the four images.
1. Transparency. Is this an automatic occurence in generating the PDF? Can I turn it on/off? (The 'Save Adobe PDF' window that allows changes to: General, Compression, Marks & Bleeds,Output,, Advanced.....)
Transparency is part of some design and all Effects. Note that you can change a color by using a tint or by setting it's transparency. Many times a tint will suffice. It looks the same and has the same values.
Your original screenshot apears to use images with clipping paths. (Full disclosure - I should know this, but don't...I expect) clipping paths require/invoke the transparent background to place the images within the colored area.
You cannot get around transparency but flattening converts vector objects to raster objects (when transparency touches/abuts/interacts with raster images).
You should be able to use the Illustrator Default, High Quality Print or PDFX-4 to maintain live transparency
2 very old (2004) Adobe white papers, not too legnthy which I can shed some light. Note - PDFX-4 superceeds all of these.
Transparency in Adobe Applications: A Print Production Guide
A Designer's Guide to Transparency for Print Output

Missing images when printing (in Word)

I am wrapping up a very long report for a client, and have inserted a number of color images (JPG). I cannot for the life of me get them to print. They show up just fine in the print preview, but nothing actually shows up on the paper when I actually print the document. I have checked every setting I can think of, but nothing seems to be off. I have tried converting to PDF, but the images are missing in those, too. I've also tried converting to a DOC file (rather than the current DOCX version)-- also a fail. Does anyone know what the trick is to getting images to print in Word??? I'm at a total loss and it's driving me batty.
Copying and reformatting the entire report into Pages will take FOREVER and I'm really hoping to avoid that. Help!!!!
Thanks.
Kacy

Support for Microsoft Word - Microsoft Support

Standard SMARTFORM for Check Printing/ Payment Advice

Hi All,
I have one important question...
Standard Script Check Print Program = RFFOUS_C
Standart Script Layout Name = F110_PRENUM_CHCK
& F110_D_AVIS
We have to modify it as per client requirment.
But I want to know the Standard SMARTFORM & Standard Smartform driver Program for CHECH printing & payment advice ?????????????
Is there no Smartform for check printing or if exist then please guide me?????????????????

hi umesh,
1)anyone can help me,while extending idoc,i added one segment to idoc by extending debmas.that segment has two fields.while populating data to idoc,i am getting problem like VSV0001.exit is not allowing me to write the code.
plz anyone can help me on this issue.if you did't understand this problem plz tell me how to extend the idoc.more concentration on while populating the data in to idoc.like which function module i have to use.in customer master idoc.debmas.i am new to this environment.plz help me.like complet work till completion of task.
2)and my next assignment is in smartforms.plz let me know .i was created the screen.according to that screen.i have to make print program.plz tell me how to give the text elements.
like we have given in scripts, page window and then F9 to give the text elements.and make the program.like that any one can tell me clearly.how to make the complete smartforms programs.
plz this requirement is very very urgent,plz could you send it for my [email protected]
advance thanks for your help.
thansk&regards,
radhiks.

Unable to print chinese characters in Smartforms use Zebra printer

Hi,all.
My printer is Zebra ZM400 300dpi,I created a new output device 'TestDevice' and use the Lzeb3 Device type.
In my smartofrms i used the Zebra command to rotated text.Now the smartforms counld not print chinese characters but '#' instead.(style font 'ANDALE_S')
Anyone could help me....
Thanks Advance.
Andy Lee.

Hello Andy,
If you use the device type LZEBU3 with font ANDALE_S, then when you print then the SAP system
send a print control for activating the ANDALE font installed on the printer, and the text should
be outputed over this font.
When you get # during print then this means that the device type or the SAP font don't support
this character(this was the original problem), when you get a "space" then this means that the
font which is used by the printer don't support this character.
I think this can have 2 causes in your case:
1. The SAP system use the print control SF000 when you use ANDALE_S, which contains
the print control ^CI17^F8 in HEX form. This should activate the ANDALE font on your printer.
(You can find this under tr. SE73 -> Printer Fonts -> LZEBU3 -> ANDALE_S)
You should check wheter this is the correct print control. You should find on the printer an option
which list you all installed fonts, and also the print control which can be used for activating it.
Compare this print control from the printer with the above print control from the SAP system.
If you see a differnce then change the print control in the SAP system.(Before you do that please
copy the device type LZEBU3 into customer namespace, don't change the original SAP device type)
2. The font installed on the printer don't support the character which you use. Contact Zebra to confirm this, and ask for a ANDALE font which supports the character.
Best regards,
Norbert

Placed AI images not printing correctly?

I'm having a big problem getting placed AI images to print correctly. Other placed placed images seem to reproduce fine, but not the AI images. Any ideas?

Let's keep this discussion in one thread, OK?
http://forums.adobe.com/message/2080004#2080004

Images smaller printed then edited, help needed

Hello everyone.
I'm using LiveCycle Manager 8.0 on Win XP SP3
When building a new form i got various problems with images being printed smaller then what is defined and shown in the edited and also in preview mode.
The problem occurs with images that are being included with Image Fields.
The problem gets even bigger if i place the images by showing them by the push of a button (script)
Pictures will not be x/y placed and sized as defined in the layout parameter
Here are some details about the pics:
Larger header pic 17.7 x 8.0 cm, 300dpi
Smaller pics bellow 17.7 x 1.6 cm, 300dpi
Here are some screen shoots to show you how it looks.
Any help would be great as I really tried a lot but can't find a solution.
Designmode:
Preview Mode
Final PDF messed up
PS: LiveCycle Manager also seems to run very bugy. Sometimes it crashes when changing a image parameter.

Hi,
OK I am trying to get to grips with what you are trying to achieve.
The preview now shows how the form will look in Acrobat (Form / Properties / Preview / Interactive).
In the top imageField I cannot explain why the displayed image is not as per the design view. Because it works for an image object (rev 1 in previous post), I suspect that it is a bug in the imageField object.
There are workarounds however it would depend on the number of options (images) that the user has to select and if these images will change over time. If there are a small number of options, you could include all of the images in a series of image objects that are hidden and then change the visibility depending on what the user selects. This would be easier for the user because they would not have to browse to an image location.
In relation to the "Geben Sie hier einen Titel ein |" header; if you are looking to change the background colour, then there is a simpler way, which i have included in rev 2.
You can script rectangles for presence, colour, etc. The rectangle cannot contain the script, but you can include script in a button that will affect the presence and appearance (look) of the rectangle.
Hope that helps,
Niall

When printing to the dye sublimation epson stylus pro 7700 using adobe illustrator it is required that I mirror the image. When mirroring the image the print colors are muted. Not mirrored and the print colors are perfect. Any suggestions?

When printing to the dye sublimation epson stylus pro 7700 using adobe illustrator it is required that I mirror the image. When mirroring the image the print colors are muted. Not mirrored and the print colors are perfect. Any suggestions?

CS5
On Tue, Oct 7, 2014 at 9:49 AM, ADBEDesigner <[email protected]>

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET. No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

maahes wrote:
did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
For clarification: udev is in the mkinitcpio.
I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

SmartForms: Image is printed backwards.

Similar Messages

Maybe you are looking for