Smartforms in HTML Format
Hi Guru's,
Please help me.
I want to display Smartforms in HTML Format.
i.e when I run my Tcode inspite of Print Preview the data should open in HTML Format.
Thanks in Advance.
Chk this..
http://help.sap.com/saphelp_nw04/helpdata/EN/59/cd7da407d711d5b66f006094192fe3/content.htm
Re: FM for conversion of graphical display of spool to html
Regards,
Midhun Abraham
Edited by: Midhun Abraham on Oct 11, 2008 9:35 AM
Similar Messages
-
Email smartform in html format
Hello all,
I've been searching SDN for help with creating an email in html format via smartforms. Pavan Bayyapu's blog was really helpful and I've also used program SF_XSF_DEMO_MAIL as the basis for my program. I followed their examples exactly but my emails always appear as a .MTL attachment, never as just the body of the email.
I tried removing the file name from lo_mime_helper->set_main_html and from lo_mime_helper->add_binary_part as suggested by some other folks but I haven't had any success.
Has anyone solved this same issue? Maximum points will be given to helpful suggestions.
Thank you.<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/59/cd7da407d711d5b66f006094192fe3/content.htm">converting SF to html format</a>
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
regards,
srinivas
<b>*reward for useful answers*</b> -
Solution manager Smartform in HTML format.
Hi All,
Here , I ahve a requirement, the smartform <b>CRM_SLFN_ORDER_SERVICE_01</b> is going to the service desk in PDF format as all the Output types in SCOT for Scripts and Smartforms have been configured as PDF. But I have to send it in HTML format.... is there any way other than coping the Class and modifying........
if there is no way other than that PL. let me know how to modify the code to convert the output into HTML format......
thank you,
Girish.Hi,
It is possible to send mail in html.
Copy the Processing Class CL_DOC_PROCESSING_CRM_ORDER into own namespace (for example Z_CL_DOC_PROCESSING_CRM_ORDER)
Create a new Processing Method (or copy the SAP Standard CRM_SRVORDER_EXEC_SMART_FROM) and insert (or replace) the following code:
Z_CRM_SRVORDER_EXEC_SMARTFORM
METHOD Z_CRM_SRVORDER_EXEC_SMART_FORM.
INCLUDE: crm_direct.
TYPES:
SWC_OBJECT TYPE OBJ_RECORD.
DATA:
LS_CONTROL_PARAMETERS TYPE SSFCTRLOP.
function name
DATA: function_name TYPE rs38l_fnam,
DUMMY(254) TYPE C,
ls_archive_index TYPE toa_dara,
ls_orderadm_h TYPE crmt_output_orderadm_h_com,
ls_activity_h TYPE crmt_output_activity_h_com,
ls_opport_h TYPE crmt_output_opport_h_com,
ls_orgman_h TYPE crmt_output_orgman_h_com,
lt_partner_h TYPE crmt_output_partner_h_comt,
ls_pricingdata_h TYPE crmt_output_pricingdata_h_com,
ls_sales_h TYPE crmt_output_sales_h_com,
ls_shipping_h TYPE crmt_output_shipping_h_com,
lt_payplan_d_h TYPE crmt_output_payplan_d_h_comt,
ls_customer_h TYPE crmt_output_customer_h_com,
ls_cumulat_h TYPE crmt_output_cumulat_h_com,
lt_billing_h TYPE crmt_output_billing_h_comt,
lt_cancel_h TYPE crmt_output_cancel_h_comt,
lt_appointment_h TYPE crmt_output_appointment_h_comt,
lt_billplan_d_h TYPE crmt_output_billplan_d_h_comt,
lt_billplan_h TYPE crmt_output_billplan_h_comt,
lt_status_d_h TYPE crmt_output_status_d_h_comt,
lt_status_h TYPE crmt_output_status_h_comt,
lt_srv_subject_h TYPE crmt_output_srv_subject_h_comt,
lt_srv_reason_h TYPE crmt_output_srv_reason_h_comt,
lt_srv_result_h TYPE crmt_output_srv_result_h_comt,
ls_acs_h TYPE crmt_acs_h_com,
lt_srv_subject_i TYPE crmt_output_srv_subject_h_comt,
lt_srv_refobj_h TYPE crmt_output_srv_refobj_h_comt,
lt_srv_refobj_i TYPE crmt_output_srv_refobj_h_comt,
lt_orderadm_i TYPE crmt_output_orderadm_i_comt,
lt_orgman_i TYPE crmt_output_orgman_i_comt,
lt_pricingdata_i TYPE crmt_output_pricingdata_i_comt,
lt_pricing_i TYPE crmt_output_pricing_i_comt,
lt_product_i TYPE crmt_output_product_i_comt,
lt_sales_i TYPE crmt_output_sales_i_comt,
lt_service_i TYPE crmt_output_service_i_comt,
lt_shipping_i TYPE crmt_output_shipping_i_comt,
lt_schedlin_i TYPE crmt_output_schedlin_i_comt,
lt_customer_i TYPE crmt_output_customer_i_comt,
lt_partner_i TYPE crmt_output_partner_i_comt,
lt_item_cstics_i TYPE crmt_item_cstics_tab,
lt_billing_i TYPE crmt_output_billing_i_comt,
lt_cancel_i TYPE crmt_output_cancel_i_comt,
lt_finprod_i TYPE crmt_output_finprod_i_comt,
lt_ordprp_i TYPE crmt_output_ordprp_i_comt,
lt_appointment_i TYPE crmt_output_appointment_i_comt,
lt_billplan_d_i TYPE crmt_output_billplan_d_i_comt,
lt_billplan_i TYPE crmt_output_billplan_i_comt,
lt_orderadm_i_qt TYPE crmt_output_orderadm_i_qt_comt,
lt_orderadm_i_in TYPE crmt_output_orderadm_i_in_comt,
lt_schedlin_i_cf TYPE crmt_output_schedlin_i_cf_comt,
lt_status_i TYPE crmt_output_status_i_comt,
lt_working_set_e_s_bbp TYPE /1cn/working_set_e_s_bbp_t,
lv_language LIKE sy-langu,
lo_order TYPE REF TO cl_doc_crm_order,
lv_object_guid TYPE crmt_object_guid,
lv_status TYPE jstat,
lt_status TYPE TABLE OF jstat,
lv_error_tab_wrk TYPE ssferror,
ls_output_options TYPE ssfcompop,
lt_service_i_assi TYPE crmt_output_service_i_***_comt.
fill internal structure for the output options
ls_output_options = is_output_options.
get the function name for this smart form
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = ip_smart_form
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = function_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
add an error message to processing protocol
MESSAGE i015(sppf_media) WITH ip_smart_form INTO dummy.
CALL METHOD cl_log_ppf=>add_message
EXPORTING
ip_problemclass = '1'
ip_handle = ip_application_log.
EXIT.
ENDIF.
determine the tables of the application
CALL FUNCTION 'CRM_OUTPUT_SINGLE_READ'
EXPORTING
iv_object = io_appl_object
iv_smart_form = ip_smart_form
ir_partner = io_partner
IMPORTING
es_output_orderadm_h = ls_orderadm_h
es_output_activity_h = ls_activity_h
es_output_opport_h = ls_opport_h
es_output_orgman_h = ls_orgman_h
es_output_pricingdata_h = ls_pricingdata_h
es_output_sales_h = ls_sales_h
es_output_shipping_h = ls_shipping_h
et_output_partner_h = lt_partner_h
et_output_payplan_d_h = lt_payplan_d_h
es_output_customer_h = ls_customer_h
es_output_cumulat_h = ls_cumulat_h
et_output_billing_h = lt_billing_h
et_output_cancel_h = lt_cancel_h
et_output_appointment_h = lt_appointment_h
et_output_billplan_d_h = lt_billplan_d_h
et_output_billplan_h = lt_billplan_h
et_output_status_d_h = lt_status_d_h
et_output_status_h = lt_status_h
et_output_srv_subject_h = lt_srv_subject_h
et_output_srv_reason_h = lt_srv_reason_h
et_output_srv_result_h = lt_srv_result_h
et_output_srv_refobj_h = lt_srv_refobj_h
et_output_srv_refobj_i = lt_srv_refobj_i
et_output_srv_subject_i = lt_srv_subject_i
es_output_acs_h = ls_acs_h
et_output_orderadm_i = lt_orderadm_i
et_output_orgman_i = lt_orgman_i
et_output_pricingdata_i = lt_pricingdata_i
et_output_pricing_i = lt_pricing_i
et_output_product_i = lt_product_i
et_output_sales_i = lt_sales_i
et_output_service_i = lt_service_i
et_output_shipping_i = lt_shipping_i
et_output_schedlin_i = lt_schedlin_i
et_output_partner_i = lt_partner_i
et_item_cstics_i = lt_item_cstics_i
et_output_customer_i = lt_customer_i
et_output_billing_i = lt_billing_i
et_output_cancel_i = lt_cancel_i
et_output_finprod_i = lt_finprod_i
et_output_ordprp_i = lt_ordprp_i
et_output_appointment_i = lt_appointment_i
et_output_billplan_d_i = lt_billplan_d_i
et_output_billplan_i = lt_billplan_i
et_output_orderadm_i_qt = lt_orderadm_i_qt
et_output_orderadm_i_in = lt_orderadm_i_in
et_output_schedlin_i_cf = lt_schedlin_i_cf
et_output_status_i = lt_status_i
et_output_wrk_set_e_s_bbp = lt_working_set_e_s_bbp
ev_language = lv_language
et_output_service_i_assi = lt_service_i_assi.
set mail title
SELECT SINGLE caption INTO ls_output_options-tdtitle
FROM stxfadmt WHERE
formname = ip_smart_form AND
langu = lv_language.
IF ls_output_options-tdtitle IS INITIAL.
SELECT SINGLE caption INTO ls_output_options-tdtitle
FROM stxfadmt WHERE
formname = ip_smart_form.
ENDIF.
REPLACE '&' WITH ls_orderadm_h-object_id
INTO ls_output_options-tdtitle.
*--language of smart form--
determin here the language of the smart form
ls_control_parameters = is_control_parameters.
ls_control_parameters-langu = lv_language.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE 'MYGRAPHICS/'. "#EC NOTEXT
DATA:
LS_XSFPARAM_LINE TYPE SSFXSFP,
LS_HTML TYPE TRFRESULT,
LT_GRAPHICS TYPE TSF_XSF_GR.
*SET SMARTFORM OUTPUT OPTIONS
LS_OUTPUT_OPTIONS-XSFCMODE = 'X'.
LS_OUTPUT_OPTIONS-XSF = 'X'.
LS_OUTPUT_OPTIONS-XSFOUTMODE = 'A'.
LS_OUTPUT_OPTIONS-XSFFORMAT = 'X'.
LS_OUTPUT_OPTIONS-TDARMOD = '' .
CLEAR LS_OUTPUT_OPTIONS-XSFOUTDEV.
LS_XSFPARAM_LINE-NAME = 'GRAPHICS'. "#EC NOTEXT
LS_XSFPARAM_LINE-VALUE = 'EXTRACT'. "#EC NOTEXT
APPEND LS_XSFPARAM_LINE TO LS_OUTPUT_OPTIONS-XSFPARS.
LS_XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'. "#EC NOTEXT
LS_XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND LS_XSFPARAM_LINE TO LS_OUTPUT_OPTIONS-XSFPARS.
LS_XSFPARAM_LINE-NAME = 'CONTENT-ID'. "#EC NOTEXT
LS_XSFPARAM_LINE-VALUE = 'ENABLE'. "#EC NOTEXT
APPEND LS_XSFPARAM_LINE TO LS_OUTPUT_OPTIONS-XSFPARS.
SILENT MODE ON
LS_OUTPUT_OPTIONS-TDIMMED = SPACE.
LS_OUTPUT_OPTIONS-TDNEWID = SPACE.
LS_CONTROL_PARAMETERS-NO_DIALOG = 'X'. "#EC NOTEXT
LS_CONTROL_PARAMETERS-DEVICE = ''. "EC NOTEXT
call function to process smart form (old forms)
CALL FUNCTION function_name
EXPORTING
archive_index = is_archive_index
archive_index_tab = ct_archive_index_tab
archive_parameters = is_archive_parameters
control_parameters = ls_control_parameters
mail_appl_obj = is_mail_appl_obj
mail_recipient = is_mail_recipient
mail_sender = is_mail_sender
output_options = ls_output_options
user_settings = ip_user_settings
orderadm_h = ls_orderadm_h
activity_h = ls_activity_h
opport_h = ls_opport_h
orgman_h = ls_orgman_h
partner_h = lt_partner_h
pricingdata_h = ls_pricingdata_h
sales_h = ls_sales_h
shipping_h = ls_shipping_h
payplan_d_h = lt_payplan_d_h
cumulat_h = ls_cumulat_h
customer_h = ls_customer_h
acs_h = ls_acs_h
billing_h = lt_billing_h
cancel_h = lt_cancel_h
appointment_h = lt_appointment_h
billplan_d_h = lt_billplan_d_h
billplan_h = lt_billplan_h
status_d_h = lt_status_d_h
status_h = lt_status_h
srv_subject_h = lt_srv_subject_h
srv_reason_h = lt_srv_reason_h
srv_result_h = lt_srv_result_h
srv_subject_i = lt_srv_subject_i
srv_refobj_h = lt_srv_refobj_h
srv_refobj_i = lt_srv_refobj_i
orderadm_i = lt_orderadm_i
orderadm_i_qt = lt_orderadm_i_qt
orgman_i = lt_orgman_i
pricingdata_i = lt_pricingdata_i
pricing_i = lt_pricing_i
product_i = lt_product_i
sales_i = lt_sales_i
service_i = lt_service_i
schedlin_i = lt_schedlin_i
schedlin_i_cf = lt_schedlin_i_cf
shipping_i = lt_shipping_i
partner_i = lt_partner_i
item_cstics_i = lt_item_cstics_i
customer_i = lt_customer_i
billing_i = lt_billing_i
cancel_i = lt_cancel_i
finprod_i = lt_finprod_i
ordprp_i = lt_ordprp_i
appointment_i = lt_appointment_i
billplan_d_i = lt_billplan_d_i
billplan_i = lt_billplan_i
status_i = lt_status_i
working_set_e_s_bbp = lt_working_set_e_s_bbp
language = lv_language
service_i_assi = lt_service_i_assi
IMPORTING
document_output_info = es_document_output_info
job_output_info = es_job_output_info
job_output_options = es_job_output_options
EXCEPTIONS
output_canceled = 1
parameter_error = 2
OTHERS = 3.
IF sy-subrc = 0.
DATA:
LT_RETURN TYPE BAPIRET2_TAB,
LT_RECEIVERS TYPE TABLE OF SOMLRECI1,
LV_MAIL_SUBJECT TYPE SO_OBJ_DES,
LV_SEND_PARTNER TYPE BU_PARTNER.
retrieve the sender and recipient from business objects
provided by postprocessing framework
DATA:
LS_SENDER TYPE SWC_OBJECT,
LS_RECIPIENT TYPE SWC_OBJECT,
WA_RECEIVER TYPE SOMLRECI1.
SWC_CREATE_OBJECT LS_SENDER 'RECIPIENT' SPACE.
SWC_OBJECT_FROM_PERSISTENT IS_MAIL_SENDER LS_SENDER.
SWC_GET_PROPERTY LS_SENDER 'AddressString' LV_SEND_PARTNER.
SWC_CREATE_OBJECT LS_RECIPIENT 'RECIPIENT' SPACE.
SWC_OBJECT_FROM_PERSISTENT IS_MAIL_RECIPIENT LS_RECIPIENT.
SWC_GET_PROPERTY LS_RECIPIENT 'AddressString' WA_RECEIVER-RECEIVER.
SWC_GET_PROPERTY LS_RECIPIENT 'TypeId' WA_RECEIVER-REC_TYPE.
WA_RECEIVER-COM_TYPE = 'INT'. "#EC NOTEXT
APPEND WA_RECEIVER TO LT_RECEIVERS.
Set Email Subject
SELECT SINGLE caption INTO LV_MAIL_SUBJECT
FROM stxfadmt WHERE
formname = ip_smart_form AND
langu = lv_language.
IF ls_output_options-tdtitle IS INITIAL.
SELECT SINGLE caption INTO LV_MAIL_SUBJECT
FROM stxfadmt WHERE
formname = ip_smart_form.
ENDIF.
REPLACE '&' WITH ls_orderadm_h-object_id
INTO LV_MAIL_SUBJECT.
===========
LS_HTML = ES_JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
LT_GRAPHICS[] = ES_JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
HTML_DATA TYPE TRFRESULT,
GRAPHICS TYPE TSF_XSF_GR,
LV_SENT_TO_ALL TYPE BOOLEAN,
LV_SEND_ADDRESS TYPE ADR6-SMTP_ADDR,
LI_SENDER TYPE REF TO IF_SENDER_BCS,
RECEIVER TYPE SOMLRECI1,
LO_BCS TYPE REF TO CL_BCS,
LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE,
LO_RECIPIENT TYPE REF TO IF_RECIPIENT_BCS,
L_FILENAME TYPE STRING,
LT_SOLI TYPE SOLI_TAB,
LT_SOLIX TYPE SOLIX_TAB,
LS_SOLI TYPE SOLI,
LS_SOLIX TYPE SOLIX,
L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
HTML_XSTR TYPE XSTRING,
HTML_STR TYPE STRING,
HTML_LEN TYPE I,
L_OFFSET TYPE I,
L_LENGTH TYPE I,
L_DIFF TYPE I,
L_CONTENT_ID TYPE STRING,
L_CONTENT_TYPE TYPE W3CONTTYPE,
L_OBJ_LEN TYPE SO_OBJ_LEN,
GR_XSTR TYPE XSTRING,
L_GR_RAW TYPE BAPICONTEN,
L_USERNAME TYPE UNAME,
L_MAIL_ADDRESS TYPE AD_SMTPADR,
WA_RETURN TYPE BAPIRET2,
LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
CLEAR HTML_XSTR.
LOOP AT LS_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(LS_HTML-LENGTH).
CALL FUNCTION 'SCP_TRANSLATE_CHARS' "#EC NOTEXT
EXPORTING INBUFF = HTML_XSTR
INCODE = '4110' " UTF-8 "#EC NOTEXT
OUTCODE = '0000' " ACTUAL CODEPAGE
CSUBST = 'X' "#EC NOTEXT
SUBSTC_SPACE = 'X' "#EC NOTEXT
IMPORTING OUTBUFF = HTML_STR
OUTUSED = HTML_LEN
EXCEPTIONS OTHERS = 1.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1'
IGNORING CASE. "#EC NOTEXT
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING
CASE. "#EC NOTEXT
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING
CASE. "#EC NOTEXT
REPLACE ALL OCCURRENCES OF '</A>' IN HTML_STR WITH '</A>'
IGNORING CASE. "#EC NOTEXT
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<'
IGNORING CASE. "#EC NOTEXT
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>'
IGNORING CASE. "#EC NOTEXT
HTML_LEN = STRLEN( HTML_STR ).
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CREATE OBJECT LO_MIME_HELPER.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
CONTENT = LT_SOLI
FILENAME = 'SAPWEBFORM.HTM' "#EC NOTEXT
DESCRIPTION =
'SAP WEB FORM'. "#EC NOTEXT
*prepare the graphic content from the smartform
LOOP AT LT_GRAPHICS INTO L_GRAPHIC.
CLEAR GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLIX TO LT_SOLIX.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS
'.BMP' INTO L_FILENAME. "#EC NOTEXT
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS
'.BMP' INTO L_CONTENT_ID. "#EC NOTEXT
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
EXPORTING
CONTENT = LT_SOLIX
FILENAME = L_FILENAME
EXTENSION = 'BMP' "#EC NOTEXT
DESCRIPTION = 'GRAPHIC IN BMP FORMAT' "#EC NOTEXT
CONTENT_TYPE = L_CONTENT_TYPE
LENGTH = L_OBJ_LEN
CONTENT_ID = L_CONTENT_ID.
ENDLOOP.
TRY.
LO_DOC_BCS = CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED(
I_SUBJECT = LV_MAIL_SUBJECT
I_MULTIREL_SERVICE = LO_MIME_HELPER ).
CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
ERROR HANDLING
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'E'. "#EC NOTEXT
MOVE LV_DOCUMENT_BCS->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
EXIT.
CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'E'. "#EC NOTEXT
MOVE LV_BCOM_MIME->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
EXIT.
CATCH CX_GBT_MIME INTO LV_GBT_MIME.
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'E'. "#EC NOTEXT
MOVE LV_GBT_MIME->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
EXIT.
ENDTRY.
REUSE THE CONTENT PREPARED FOR ALL RECEIVERS
LOOP AT LT_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
CREATE SEND_REQUEST
TRY.
LO_BCS = CL_BCS=>CREATE_PERSISTENT( ).
LO_BCS->SET_DOCUMENT( I_DOCUMENT = LO_DOC_BCS ).
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'E'. "#EC NOTEXT
MOVE LV_SEND_REQ_BCS->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
EXIT.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'. "#EC NOTEXT
L_USERNAME = LV_SEND_PARTNER .
TRANSLATE L_USERNAME TO UPPER CASE. "#EC TRANSLANG
LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
L_FROM_MAIL_ADDRESS = L_USERNAME.
LI_SENDER ?=
CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS(
I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
EXPORTING
I_SENDER = LI_SENDER.
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ERROR HANDLING
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'E'. "#EC NOTEXT
MOVE LV_ADDRESS_BCS->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
EXIT.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
FAILED TO ADD A RECIPIENT
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'E'. "#EC NOTEXT
MOVE LV_SEND_REQ_BCS->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
EXIT.
ENDTRY.
CREATE RECIPIENT
TRY.
LO_RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS(
I_ADDRESS_STRING = L_MAIL_ADDRESS ).
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ERROR HANDLING
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'W'. "#EC NOTEXT
MOVE LV_ADDRESS_BCS->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
CONTINUE.
ENDTRY.
TRY.
LO_BCS->ADD_RECIPIENT( I_RECIPIENT = LO_RECIPIENT ).
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
FAILED TO ADD A RECIPIENT
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'W'. "#EC NOTEXT
MOVE LV_SEND_REQ_BCS->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
CONTINUE.
ENDTRY.
SEND
TRY.
RECEIPTS ONLY FOR ERRORS
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
I_REQUESTED_STATUS =
'N'. "#EC NOTEXT
LV_SENT_TO_ALL = LO_BCS->SEND( ).
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
CLEAR WA_RETURN.
WA_RETURN-TYPE = 'E'. "#EC NOTEXT
MOVE LV_SEND_REQ_BCS->GET_LONGTEXT( ) TO WA_RETURN-MESSAGE.
INSERT WA_RETURN INTO TABLE LT_RETURN.
ERROR HANDLING
EXIT.
ENDTRY.
ENDLOOP. " END LOOP AT LT_RECEIVERS
COMMIT WORK.
ES_JOB_OUTPUT_INFO-OUTPUTDONE = 'X'.
SET THE SUCCESS INFORMATION
WA_RETURN-TYPE = 'I'. "#EC NOTEXT
WA_RETURN-MESSAGE = 'MAIL SENT SUCCESSFULLY'. "#EC NOTEXT
INSERT WA_RETURN INTO TABLE LT_RETURN.
SET STATUS PRINTED INTO THE CRM ORDER
CALL FUNCTION 'CRM_STATUS_SET_INTERN'
EXPORTING
IV_OBJNR = LV_OBJECT_GUID
IV_STATUS = GC_STATUS-PRINTED
XNOAUTO = TRUE
EXCEPTIONS
OBJECT_NOT_FOUND = 1
STATUS_INCONSISTENT = 2
STATUS_NOT_ALLOWED = 3
OTHERS = 4.
ELSE.
CASE SY-SUBRC.
WHEN 1.
MESSAGE E016(SPPF_MEDIA) INTO DUMMY.
WHEN 2.
MESSAGE E017(SPPF_MEDIA) WITH FUNCTION_NAME INTO DUMMY.
WHEN 3.
MESSAGE E018(SPPF_MEDIA) WITH FUNCTION_NAME INTO DUMMY.
ENDCASE.
CALL METHOD CL_LOG_PPF=>ADD_MESSAGE
EXPORTING
IP_PROBLEMCLASS = '1'
IP_HANDLE = IP_APPLICATION_LOG.
ENDIF.
GET ERROR TABLE
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
ERRORTAB = ET_ERROR_TAB.
FILL ERROR INTO CRM_ORDER STATUS
LOOP AT ET_ERROR_TAB INTO LV_ERROR_TAB_WRK
WHERE MSGTY = GC_MSGTYPE-ERROR.
CALL FUNCTION 'CRM_MESSAGE_COLLECT'
EXPORTING
IV_CALLER_NAME = GC_OBJECT_NAME-ORDER
IV_MSGNO = LV_ERROR_TAB_WRK-MSGNO
IV_MSGID = LV_ERROR_TAB_WRK-MSGID
IV_MSGTY = LV_ERROR_TAB_WRK-MSGTY
IV_MSGV1 = LV_ERROR_TAB_WRK-MSGV1
IV_MSGV2 = LV_ERROR_TAB_WRK-MSGV2
IV_MSGV3 = LV_ERROR_TAB_WRK-MSGV3
IV_MSGV4 = LV_ERROR_TAB_WRK-MSGV4
IV_MSGTYPE = GC_MSGTYPE-WARNING
IV_MSGLEVEL = GC_MSGLEVEL-ADMINISTRATOR
EXCEPTIONS
NOT_FOUND = 1
APPL_LOG_ERROR = 2
OTHERS = 3.
ENDLOOP.
ENDMETHOD.
Now put the class and method into the action definition.
Kind regards,
Remy Piets -
Trying to send SmartForm in HTML format - error
Hello
I am having some trouble when i try to send a smart form in a html format to some e-mail recipients. I have written an program in ABAP that does the extraction of smartform contents and translates in HTML (+CSS) format, ready to be send. I got the program here
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp
and modified it just a little bit - no major changes.
I guess the problem is in a service that is not running on the system but i don't know which is that and even where to look for that. I also explained my problem to my BC group but they don't seem to have any ideas .
I checked the system info (which comp. version we are running):
Comp. version: CRM 5.0
Detailed view:
SAP_ABA 700 0006
SAP_BASI 700 0006
PI_BASI 2005_1_700 0006
ST-PI 2005_1_700 0001
SAP_BW 700 0006
SAP_AP 700 0003
BBPCRM 500 0003
I have this program properly WORKING on our other system.
Info:
Comp. version: BBPCRM 4.0
Detailed view:
SAP_BASIS 620 0046
SAP_ABA 620 0046
BBPCRM 400 0007
PI_BASIS 2004_1_620 0009
ST-PI 2005_1_620 0003
ST-A/PI 01G_CRM400 0000
I get the error below. Thanks for all your answers in advance!
error -
Service cannot be reached
What has happened?
URL http://localhost/SAP/BC/BSP/SAP/SMART_FORMS/DEFAULT.CSS call was terminated because the corresponding service is not available.
Note
The termination occurred in system TC1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:005-u:UPUKOLBL-l:5-i:peca_TC1_48-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
.ZETEDNIKSTYLE div#N1.par{ font-family : "Arial" ; font-size : 30pt ; font-weight : bold ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.ZETEDNIKSTYLE div#N2.par{ font-family : "Arial" ; font-size : 30pt ; font-weight : bold ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; color : #000000 ; clear : both ;}.ZETEDNIKSTYLE div#P1.par{ font-family : "Arial" ; font-size : 11pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; color : #000000 ; clear : both ;}.ZETEDNIKSTYLE div#P2.par{ font-family : "Arial" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : underline ; text-align : left ; color : #0000FF ; clear : both ;}.ZETEDNIKSTYLE a#FIRST-001.page@media screen {#WINBACKGROUND.win{ overflow : hidden ;}}@media print {#WINBACKGROUND.win{ overflow : hidden ;}}#FIRST-001.page #WINBACKGROUND.win@media screen {#WINBODYTEXT.win{ overflow : auto ;}}@media print {#WINBODYTEXT.win{ overflow : hidden ;}}#FIRST-001.page #WINBODYTEXT.win@media screen {#WINLOGO.win{ overflow : hidden ;}}@media print {#WINLOGO.win{ overflow : hidden ;}}#FIRST-001.page #WINLOGO.winI have the same problem even the service in SICF is active. Is it something to do with the default.css url which pointing to localhost? http://localhost/SAP/BC/BSP/SAP/SMART_FORMS/DEFAULT.CSS
Pls help. -
Smartforms output in HTML format
Hi Experts,
I want to save my smartforms in HTML format.Is there any Standard programe is available for it.
Like as RSTXPDFT4 for converting output in PDF format.Hi,
Check this link.In that,I am converting the output of smartform to PDF and then attaching it through mail.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/smartforms/smartform in abap.pdf -
Urgent Help. How to send the email in HTML format in Version 4.6c
Hi,
Please help me how to send a mail in HTML format with logo and specified format. Is it possible to send the SAPscript or Smartform in HTML format to external mail address. The logo and the format is very important in this e-mail.
quick response will help me better.
Regards,
NaiduHere is a sample program which emails HTML in the body. Of course you can put an HTML tag in there that would point to the logo on some server(internet). Notice we are just putting the HTML code in the MAILTXT table, This is how we do it at my company.
report zrich_0002.
data: maildata like sodocchgi1.
data: mailtxt like solisti1 occurs 10 with header line.
data: mailrec like somlrec90 occurs 0 with header line.
start-of-selection.
clear: maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
perform build_text_message.
perform build_receivers.
perform send_mail_nodialog..
* Form BUILD_TEXT_MESSAGE
form build_text_message.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
mailtxt = '<html>'.
append mailtxt.
mailtxt = '<head>'.
append mailtxt.
mailtxt = '<title>Untitled Document</title>'.
append mailtxt.
mailtxt = '<meta http-equiv="Content-Type" content="text/html;'.
append mailtxt.
mailtxt = 'charset=iso-8859-1">'.
append mailtxt.
mailtxt = '</head>'.
append mailtxt.
mailtxt = '<body>'.
append mailtxt.
mailtxt = '<div align="center"><em><font' .
append mailtxt.
mailtxt = 'color="#0000FF" size="+7" face="Arial,'.
append mailtxt.
mailtxt = 'Helvetica, sans-serif">THIS'.
append mailtxt.
mailtxt = ' IS A TEST </font></em><font' .
append mailtxt.
mailtxt = 'color="#0000FF" size="+7" face="Arial,'.
append mailtxt.
mailtxt = 'Helvetica, sans-serif"></font>'.
append mailtxt.
mailtxt = '</div>'.
append mailtxt.
mailtxt = '</body>'.
append mailtxt.
mailtxt = '</html>'.
append mailtxt.
endform.
* Form BUILD_RECEIVERS
form build_receivers.
* mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
endform.
* Form SEND_MAIL_NODIALOG
form send_mail_nodialog.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'HTM'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.
Regards,
Rich Heilman -
Hi,
How can I change the format of a Smartform to the different output formats "Html" or "PDF" in the programm?.
Have I to change the output-options ? What are the combinations?.
Where can I read anything about these questions?.
Thanks.Thank you ,
I have solved the problem with your tips.
I have made a program and I can change my smartform in normal Print or PDF or HTML format.
Perfect.
Thanks again -
Smartform layout to html format
hi,
how to convert smartforms layout to html format
along with code.Chk this..
http://help.sap.com/saphelp_nw04/helpdata/EN/59/cd7da407d711d5b66f006094192fe3/content.htm -
Hi,
I need to convert Smartform data stream into HTML format and
pass the same to Webdynpro application where it will be displayed on the browser.
I have specified Smartform output format as 'XSF output+HTML'.
Use of BSP application is ruled out due to certain limitations.
The FM CONVERT_OTF returns data in ASCII or PDF format only.
Can any one tell some Function Module name to convert
Smartform data to HTML format or any other way out?
thanks.check out this link
Smartform to HTML conversion
thnks
jaideep
*reward points if useful -
Graphics(Styles) are not Affecting in HTML Format of Smart Form
Hi,
I have converted a Smartform from PDF format to HTML. but the Graphics ( Styles ) are not Affecting the out put.
Can any body Give me the solution.Please suggest me ,how to convert from pdf to html workformat,if any program is available for that.Please send it
-
Hello all,
I've been searching SDN for help with creating an email in html format via smartforms. Pavan Bayyapu's blog was really helpful and I've also used program SF_XSF_DEMO_MAIL as the basis for my program. I followed their examples exactly but my emails always appear as a .MTL attachment, never as just the body of the email.
I tried removing the file name from lo_mime_helper->set_main_html and from lo_mime_helper->add_binary_part as suggested by some other folks but I haven't had any success.
Has anyone solved this same issue? Maximum points will be given to helpful suggestions.
Thank you.
(This message also posted on the ABAP forum)hi
In print program of smart form use this function module.
WWW_LIST_TO_HTML
Thanks,
Usha -
Sending an email in HTML format
in order to change the mail format from PDF to HTML format, first I create the smartform with the relevant content , secont I create a new class and implement the method with the code mentioned in the blog "sending HTML Email from SAP CRM/ERP" and I defined at the action profile in IMG (I didn't
add nothing but the method mentionedin the blog).
the appointment is saved and the mail is sent in HTML format . but an error message is send to the user at the crm_ic tranzaction. the error message is BS(001) " no status object is available for &".
the message is raised from program LCRMBSVAF14 / form status_read.
if I put break-point at the message line(86) , the message is shown and the crm_ic tranzaction is stoped
but if I put break-point a few lines before(line no 33) and track each step the tranzaction function correct and the crm_ic show an o.k. message , I can not find a reason why the tranzaction process with break-point and don't pass with out it.
thank you .rj_oregon wrote:
If you like email me out-of-band and I can send you a full sample .txt file of "hello world" that takes 3K in plain text, 256KByte in rich-text, most of it injected.
If it looks anything like the sample here, that's unnecessary:
Test_Email_Adblock_enabled.txt
If what you see is substantially different, though, I'd be interested in seeing it. (I can't e-mail you, though, as I don't know your e-mail address. You can find mine, though, by looking at the contact link at the bottom of any page on my site, listed in my profile here.)
This is not a feature in adblock, I view it as a bug.
I agree, it should not be doing that.
My suspicion is that AdBlock works by adding this code to every page you view, thus rendering the advertising elements invisible. However, in the case of OWA, it must be inserting that code in a bad place, where it shows up in the message. Mail servers will be prone to rejecting such a message, probably because some of the strings that code uses to identify these ads might look malicious. There's nothing that I can see in that code that's actually malicious, though... just a bunch of CSS conditions that make matching elements invisible. -
Idoc-xi-file scenario. how to display file in html format
I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
KumarHi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar -
PZ11 - REM Statement in HTML format in ESS
Hi
Can we display the Remuneration statement in HTML format instead of the PDF format in ESS? If yes, how do we do that ?
Currently our system is converting the smart_form to PDF and displaying in the PDF through PZ11 transaction.
ThanksHi VAB
You need to call BAPI BAPI_GET_PAYSLIP_HTML (FM) to meet your business requirement.
The conversion from ABAP-listobject to HTML will be done via function module WWW_HTML_FROM_LISTOBJECT
Also please notice: Note 425548 says that we must "adapt our list" so that it's layout is
similar to an HTML table. The ESS documentation for renumeration statement says that if we change the form we must also change the HTML templates. The HTML appears to be generated from the form by a "converter routine". Documentation refers to templates HR_PAY_PAYSLIP and HR_PAY_PAYSLIP_PAGE for building the renumeration statement. using SMW0 to see them.
Regards,
Jun -
Physical page is not the same in HTML format
I am using Oracle 6i to develop some reports. While running this reports using the developer, the logical page is the same size as the physical page.
When generating the same reports in HTML format the physical pages do not seem to be the same as the logical pages, since the contents of one page is being printed in two pages, whereas using the developer the report will print only in one page. I look at the Layout Model properties and I have set it in the following way :
Layout Main Section
Width : 8.5
height : 11
Horizontal Panels per PAge 1
VErtical Panels per page : 1
Orientation Default
Report Width : 80
Report Height : 66
Any Help will be appreciatedOpen you QuickTime movie, go to window and select Show movie properties, select videotrack and change Transperancy (low left) and select Composition in stead of "none - allow dithering" from the drop menu. See if this helps.
Maybe you are looking for
-
Adobe Cloud auf einem zweiten Computer
Ich habe die Adobe Cloud von meiner Arbeit. Es wurde mir gesagt, dass ich die Cloud ein zweites mal auf meinem privaten Computer installieren kann. Wie geht das?
-
hi,i got problems,i cannot view the JMenuItem ?what's wrong ? satu.java import java.awt.BorderLayout; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.swing.JFrame; public class satu { * @param args publ
-
Projects not showing up in 10.1!!!
Recently updated to 10.1, was all ok yesterday but the organisation was all messed up. Today I was going to manually fix it. Opened the App and my Projects would not show! Events show up but under the Updated Projects Tab nothing comes up. I checked
-
Folder mysteriously disappeared after update. Umm... help?
Greetings, Here's the problem: I had a folder for my desktop pictures which sat happily in my "Pictures" folder before the 10.5 update. It was used as the target folder in the desktop bg system setting. Since upgrading to 10.5 the new desktop bg sett
-
i have a procedure which contains external table with 100 columns.. data from this table is tranferred to temp table.. any errors are caught here and if there are no errors then base table is merged with temp tables data.. my problem is columns get a