Smartforms - issue in display page
Hai ,
I have to dispaly the smartform in the below mentioned way.
it has to display mara records(no of records changes dependending on customer) & the last page with
terms & conditions.
in the ablove scenario, depending on the no. of records in the Mara the pages may increase.
for example : if mara records takes 2 pages..then the total SF contains 3 pages(including the terms & condition page).if the mara records spread across 3 pages for x customer the total pages in SF would become 4.
Till here it is fine.
Now I have another problem.
for a particular customer say ABC,
I need to display another information in separte page(say extrapage) after mara records & before terms & condition.this extra page may also spread across more than on page.
This extra page is of type 'mara records page'(only the contents get changes for this ABC customer).
Now the problem is this extra page has to start from fresh page.
But in my case it is been displayed from the end of the 'mara records page'.that is if mara records page takes 2 & half page the extra page contents stat printing from very next point.I want this to start form third page.once these contents are displayed it has to display the terms & conditions as usual.
can any one have any idea abot this?
sorry , I could n't find any better way to explain my problem:).it is bit lengthy.
Thanks,
Bhaskar.
Hi:
In the same page of the smartform, you should create 2 main windows.
The first main window would execute for everyone and whenever the particular conditions would come like ABC customer, the next would execute for this, you have to put the condition within condition tab of 2nd window.
Hopefully i have cleared my points and it would helpful to solve your problem.
Regards
Shashi
Similar Messages
-
Smartforms issue with displaying line items
Hi All,
I had a requirement where in which in the main window Five line items and then the corresponding values of line items below in the same main window.
Example :
01 item1_description value1 value2
02 item2_description value1 value2
03 item3_description value1 value2
04 item4_description value1 value2
05 item4_description value1 value2
01 Jass value1 value2
02 Jass value1 value2
03 Jass value1 value2
04 Jass value1 value2
05 Jass value1 value2
if the value increases they go to next page the number of line items displayed will have the corresponding values to
be printed in the same page and in the main window.
Please help me how to do this.
Thanks & Regards,
Durga Naresh
Edited by: NareshBD on May 12, 2011 10:58 AMI sense this will be either impossible or quite hard to accomplish.
What i dont understand is: why dont you go for the approach to print all you info regarding one line item into ONE line like:
01 item1_description value1 value2 01 Jass value1 value2
02 item2_description value1 value2 02 Jass value1 value2
03 item3_description value1 value2 03 Jass value1 value2
04 item4_description value1 value2 04 Jass value1 value2
05 item4_description value1 value2 05 Jass value1 value2
that again would make things very easy. -
White space issue in displaying page on Curve 8330
Hi All
I am using a lot of <div> tags on my jsp page to be displayed on Curve 8330 I am getting unnecessary white space after the last <div> tag . I have tried to set <div> and <body> tag style attributes like padding and margins to "0px" but with no luck.
Would really appreciate help on this.
thxHi,
File to Idoc and Idoc used is ORDERS05.
Is IDOC occurence on target side is unbounded or 0..1???
If multiple occurence means then u need to change the IDOC structure, just change the occurence to o.unbounded.
Whenvever i am opening the payload with notepad i am able to see the space as 70th character and whenever i am checking the XML the space has been truncated for same.
I understand from above that the payload is correct with 70th character is space , but when u see the XML Payload in moni, the size is less or the white spaces are trimmed out.
So u neeed to add extra attribute on sender FCC
node.fieldContentFormatting nothing
by default it is trim u need to change as nothing..
Let us know the result
Babu -
Displaying Page number in all pages of sap script output
Hi All,
I have a issues in displaying page number in all pages of sap script output.
I have created a seperate window just above main window to display page number.
I have given &PAGE& in the layout editor.
Now in the sap script output i am getting page number as 1 in all the pages page number is not changing for pages-2,3, etc..
Can anybody tell me the reason for the same!
In some other objects same syntax is working fine. For this object it is not working!
Is there any setting changes!
Thanks i
Thanks,
Deep.Hi,
Just check the Page Counter of the Next or Second Page which you defined.
First page
Mode START
Numbering Type ARABIC
Second Page
Mode INC
Numbering Type ARABIC
Regards
Bala Krishna
Edited by: Bala Krishna on Oct 17, 2008 11:23 AM -
Issue with displaying summary in the Page Bottom
Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
SubbaraoHI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh -
I have been having trouble viewing pages in multiple browsers since last night. It has done this with me before. I am using an Acer Aspire and also Firefox version 23. I've tried looking online and following suggestions such as clearing the cache, retarting in safe mode, etc. Nothing seems to work. It's only on certain pages. For example- Facebook works and displays fine. It's when I go to websites like Amazon, Wix, Ebay, and others that I get the issue. The pages are displaying with a white background and just text/links and basic images. I've checked the page style and it is on Basic Page Style. Here is what I have:
http://i45.photobucket.com/albums/f78/DovesPaintedJewel/screen2.png
http://i45.photobucket.com/albums/f78/DovesPaintedJewel/screen1-1.pngStart Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Smartform content not displayed in first page
Hi SAP Experts,
I am sivakumar working in NTL, i have a problem in smartforms, PO data display for vendor, for every new vendor it should be display in new page, for that i defined command node its working fine. but the data displayed from second page first page skipped, and i want display horizantal line under header, plz give me solution for these two problems.
Thanks & Regards,
Siva,hi use the function 'SSF_OPEN' and 'SSF_CLOSE', it might solve yor problem
and for horizontal line under the header create a window of that size and give intenstiy box and shading
award points if helpful
regards,
Rohan -
Displaying Page Number in Smartforms
Hi,
I'm doing a page break in smartforms by date. In my output, the page number displays Page 1 of * (instead of Page 1 of 11) but when it displays 2 digits for the field SFSY-PAGE, it displays the total number of pages. (e.g. Page 10 of 11). I used the system fields (Page sfsy-page of sfsy-formpages). I just want to ask if any of you has an idea or have experienced this kind of error. Your help is highly much appreciated. Thanks!Hi
current page / total number of pages
&SFSY-PAGE& / &SFSY-JOBPAGES&
Go through the link given below :
http://help.sap.com/saphelp_nw04/helpdata/en/fa/0c145cd30111d3b568006094192fe3/frameset.htm
With Regards
Nikunj Shah -
The Issues and Risks page (issuesandrisks.aspx) serves up a list of issues/risks that are assigned to me. Is this a PSI call behind the scenes, or a call to the Reporting DB? Has anyone gone to this level of detail? Any help on how to
get this info programmatically would be awesome. Thanks! - M
Michael Mukalian | Jan 2010 - Dec 2010 MVP SharePoint Services | MCTS: MOSS 2007 Configuration | http://www.mukalian.com/blogIssue and risk comes from reporting DB. Please go through link it may help you to understand
http://pwmather.wordpress.com/2012/07/13/projectserver-active-issues-and-risks-on-pwa-reminders-web-part-ps2010-sp2010-sharepoint/
kirtesh -
Promblem in PO smartforms which contain 90 pages.
Dear Experts ,
I am unable to see the print preview of smartforms which contains 90 pages ,
and also unable to convert this smart forms to pdf format.
this issue is very urzent because of this i am unable to take print out of purchase order.
thanx in advance.
regards,
sonuDo not post all letters in upper case please! (forum rules)
How many pages are displayed? Is it in the print preview or in spool display (SP01; by default, only 10 pages are displayed, but you can choose to display more via SP01 menu)
If you want to convert the smartform, you may either get its internal format (OTF) when generating the spool (you may then not generate the spool at all) and use CONVERT_OTF function module, or convert the spool CONVERT_OTFSPOOLJOB_2_PDF, or the user may preview the smartform and enter pdf! in okcode field. For more information please search the forum. -
Error in smartform when printing multiple pages
Hi,
I m using a smartform which have two pages in it,
i m able to save and activate it without any error message and when i run the function module generated to chk my smartform
it runs fine and diplays two pages i m using.
but as i m attaching this form with my driver program it is giving an error message while running . the error message is " No other output defined in main window."
Please help me out to resolve the issue.Re: error in smartform when printing multiple pages
dharani tadikonda
Thanks for this answer. It is absolutely correct. -
In Smartform How to display footer & some secndry window after Main window?
Hi,
My requirement in Smartform is to display footer and and secondary window after the Main window.
also if item goes to 2nd & 3rd Page then also after main window footer and some secondary window should appear.
Do i have to maintain footer and sec. window in Main Window itself
Plz tell me in detail.
Regards
VivekHi Vivek,
In smartform, specific legth is allocated to each window, that you create for a page.
So, if you want to display secondary window on each page, create 1 secondary window with the required length and it will be displayed on each page.
And you have written that you want to display the footer of main window also on all pages. It won't happen when you display your footer in main window. you will have to create a new window for your footer as well. Main window footer will always get displayed at the end of the main window.
e.g. If your main window flows on second page, main window footer will be displayed on second page only.
I hope this helps.
Thanks,
Archana -
Firefox 3.6 does not display pages correctly
I recently upgraded to 3.5 beta 4 and it worked ok. 2 weeks ago it stopped displaying pages correctly. Uninsalling and reinstalling did not cure problem. I unistalled and installed v3.6. Same problem.
I could provide a screenshot of Mozilla home page. Backgrounds, table borders and some inages to not display. I have disabled all plugins and "load images automatically" is checked.
The images and background of this page do not display. I checked with K-meleon and IE.If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
On other platforms instead of Tools > Options use:
*Mac: Firefox > Preferences
*Linux: Edit > Preferences
*Windows: Firefox > Options
<i>Press F10 if the menu bar is hidden on Windows and Linux or use "Firefox > Options/Preferences"</i> -
Performance Issue With Displaying Candidate Details for iRecruitment
We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant> the page spins for a quite whille to show the results and some times we see the 500 errors..
We are in R12.1.3 and also applied the Patch.10427777:R12.IRC.B patch.. is there any tunnign steps for the iRecruitment page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPGYou have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
thanks -
Cannot Display Page - You cannot complete this task...
Hello,
We are getting the error(session timeout) when user complete the course(content is stting on remote server) and going back to OLMS(EBS R12.1.3) to update the status of course/test.
Can you please help us to find out the rootcause as this issue is intermittent for users?
Error:
Error: Cannot Display Page
You cannot complete this task because one of the following events caused a loss of page data:
.Your login session has expired.
.A system failure has occurred.
Thanks in advance,
RMThe same docs is applicable to R12 for the profile option.
For application server files, please see (11i/R12 How to Debug "Transaction Context Is Lost" or "You are trying to access a page that is no longer active" [ID 456906.1] -- 2. Dying of jserv/oc4j JVM & 3. jserv/oc4j timeout).
Also, see (R12: Forms Timeout More Than 2 Hrs Is Not Working After R12 Upgrade [ID 734077.1]).
Thanks,
Hussein
Maybe you are looking for
-
Graphs no longer working in PowerView
Hello, I have on tricky problem here in my company. As demanded by other areas, we were put in charge of creating a lot of power view applications. Many of them contain graphics showing basically financial data. By the end of December 2014, the appli
-
Hi, I have created alerts and it is showing in Alert Inbox. When I check in SXMB_MONI i see the error as <SAP:Category>XIAdapter</SAP:Category> <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code> <SAP:P1>500</SAP:P1> <SAP:P2>Internal
-
Why Start SQL*Plus with /nolog
What is the difference between starting SQL*Plus as in sqlplus sys as sysdba versus sqlplus /nolog connect sys as sysdba I can imagine that the second method prevents some log file from being written but sometimes logs are useful. Is there more to it
-
Safari + Parental Controls Enabled = Problem
Not sure whether to post this in Safari or Snow Leopard. Just wondering if anyone has run into the infamous (for me at least) Parental Controls bug that was present in 10.5 and now it seems it's found a way into 10.6.2. I tried to checkout today at t
-
Regular Expression Filter Mapping In Web.xml
I have a situation where I need to filter URL's that don't have a file extension. There are hundreds of URL's, so i can't specify each one separately. From what I understand, you can have a filter mapping in web.xml to map certain file extensions to