SMARTFORMS :lines are not printing.

Hi all!
   We have a SMARTFORM for outbound delivery.In that items are shown in a table manner with horizontal and vertical lines. Every thing is coming fine while taking print from laser printer but lines are missing when taking print from Dot Matrix printer.Please help where mistake is going on.

Hi ,
     Go to SPAD and check if ur device type for dot matrix printer( output devices ) is SAPWIN or not, if it is not ask d basis guy to create an output device with SAPWIN or TWSAPWIN
i think this will solve ur problems
reward if useful,
Cheers,
Deepthee kasal

Similar Messages

  • Smartform - Borders are not appeari when iam printing in DOTMATRIX Printer.

    Hi,
    I have Created a Smartform. When iam taking printout in Deskjet, borders & Line spacing
    is comming Correctly. When i try to Print using the Dotmatrix borders & Lines are not
    appearing.
    Regards
    Praveen

    Hi,
    Check the assigned page format to your custom device type. Try to assign all the page format which are available for
    HP*** which you gives you desired result.
    Regards,
    Vamshi.

  • All lines on PDF form are not printing

    Greetings to all. I am running Adobe Acrobat XI version 11.0.0 on Windows 7 Home 64bit OS. I have made an attempt to print a PDF form. All of the lines in the form will not print. The properties of the document are:  PDF Producer: MAC OS X 10.7.4 Quartz PDFContext and PDF Version: 1.3 (Acrobat 4.x). My printer is HP PSC 2350 series. There are about 30 lines on the form and out of the 30, 4 lines will not print. This form was not created by me. I saved the PDF from my university's website. Also and strangely, when I go to my printer settings and select Booklet, under Page Sizing & Handling, everything prints perfectly. I did try editing the lines by increasing the stroke width under Content and Editing but all of the lines still will not print. Here is a screenshot of the form from the website. My question is what settings on my printer or adobe acrobat do I need to change? Or what could be the cause of this issue? Any help would be greatly appreciated. Please do not hesitate to respond if more information is needed.

    Most likely, the fault lies with the application used to fill in the forms,
    which is probably Apple Preview, that is known to cause this problem. You
    can fix the forms with this utility:
    http://blog.practicalpdf.com/2013/08/introducing-the-practicalpdf-fix-form-utility/
    And in the future instruct your users not to use Preview, but only Adobe
    Reader (or Adobe Acrobat).

  • Some paragraph tags are not printing when document is printed from Framemaker 10.

    So this is really odd. I have a situation where I have a document that I am developing in Framemaker 10 several different paragraph tags are intermittently not printing when the document is physically printed. When I go to print the document from Framemaker 10 to a physical piece of paper some tags are printing partially or not at all. What makes this stranger to me is that when I print the document to a PDF, all of the content and tags show up in the PDF. Then when I try to physically print from the PDF, the tags do no print from that document as well.
    Typically the tags that are not printing are those that have been bolded, but are across several different tags. Also the problem is sometimes only to the first line of a tag, where if the tag carries over to a second line in the document, the text on the second line prints. Another quirky instance that shows up is where the text a line will print only parts of the text. The document uses the same type font for the entire document, Helvetica 55 Roman. The font size varies and the coloring varies as well, but this issue is happening for all sizes and colors.
    I'm not sure what additional information is important here, but if you need additional information please request it and I will supply it to the best of my ability. I'm a content developer with an intermediate amount of experience with Framemaker.

    I'm not sure if this is the same problem, and you didn't mention your
    OS, but there was a widespread problem with dropped text in PDF with
    Windows XP. A hotfix was issued to fix it. If on Windows XP, you should
    install it:
    http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
    Also, you mentioned that it was "bolded" text that tended to have the
    problem. Bolded text is artificially bold and does not use actual bold
    fonts. (If I recall, text is double printed at a slight offset to give
    the appearance of a bold font.) So there is no bold font to embed. Be
    sure you install and use an actual bold font, rather than using the
    bolded characteristic, or you could see problems.
    This is a stretch, but you also mentioned that some of the problem
    sections have colored text. Check the printer properties of your Adobe
    PDF virtual printer to make sure someone didn't reassign the driver (on
    the Advanced tab). It should be set to use the Adobe PDF Converter
    driver (or Acrobat Distiller in older Acrobat versions). Years ago,
    people sometimes changed this setting to use other drivers for various
    reasons, not realizing that they limited themselves to the capabilities
    of that driver. So, if they chose an HP LaserJet PostScript driver, for
    example, their documents might no longer be able to be 11"x17" or
    color-- because the printer couldn't handle it. The driver was limited
    to 8.5"x14" and black-and-white. Perhaps there is a driver set that is
    choking on the colored text-- though I would think it would merely
    convert it to B&W.
    Okay, I've grasped at enough straws.

  • Retro entires in HR Forms are not printed when using device type ZHPP3005

    Hi All,
    We are doing a HCM implementation. We are using HP P3005n printer and ZHPP3005 device type to print our HR forms. We are using ZCalibri font.These are smartforms. Everything was printing perfectly.
    Then there were retro calculations made to these forms.Strangely, the forms doesn't display these retro entries in the print preview using ZHPP3005 device type. Only the retro entries throughout the form are not printing. All other entries get printed.
    When we use device type HPLJIIID, we get these retro entries printed in our form however the format of the form gets changed.
    Now, we want to use device type ZHPP3005 and get these retro entries printed. How would we achieve this? Is this a device type issue? Or, anything needs to be done in the smartform? Why is this issue?
    Please help. Quick response will be appreciated. We are nearing our Go Live date and needs this resolved immediately.
    Thanks in Advance.

    Hi,
    Check the assigned page format to your custom device type. Try to assign all the page format which are available for
    HP*** which you gives you desired result.
    Regards,
    Vamshi.

  • Some comments on PDFs are not printed

    Hello,
    I've noticed that when making comments in Acrobat XI Pro, some of the comments are not printed as they are shown on the screen. For example, on one document I have a text box with two lines of text in it, but only the border of the text box and the second line of text prints. The first line is blank. I tried different printers and different documents, but it still happens. It's not always a text box, but usually text is omitted. I made sure "Documents and Comments" are selected to print.
    The only way to get these to print is to turn on "Print as image". I DO NOT want this to be a fix though. I'd like to be able to use the printer color options as it worked in the past with Acrobat 9.
    Can someone please help me? Thanks for your time.

    Hi
    You have a couple of options as I see it please try these steps given below might help you to fix your issue.
    1) Go to Device Manager and uninstall the click on + symbol next to Keyboard then uninstall the standard keyboard then restart your unit and check.
    2) Go to HP website and update the Bios on the unit. 
    3) Click start type Command Prompt check if all the numbers & alphabets works fine in this screen if not you might have to replace the keyboard.
    If your notebook is still under warranty, contact HP and arrange to have the part replaced.
    If you are out of warranty and would like a guide on replacing the part yourself, please let me know.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Texts with correct font are not printed

    Hi All,
    I am printing the Adobe form with some header and item texts.
    I have created a style in smartforms so that the texts in the layout would be printed accordingly.
    In the context part, I have created the text and assigned the text module. I have also given the style name at the time of creation, checked 'Copy style from text module' also. But still in the layout the texts are not printing with correct font.
    Currently the texts are prining with default font which i have declared in style.
    Do we need to give the paragraph format or style name anywhere?
    Thanks and Regards,
    Karthik Ganti.
    Message was edited by: Dezso Pap

    Hello Karthik,
         If font is uniform throughout the text, then no need to create the Smartstyle. You can do this with JavaScript.
    1. Click on the text field.
    2. Write the below JavaScript in the Initialize event.
    this.font.typeface = "Arial";
    This will override the default font which you had selected at the design time.
    If you want to change the weight, you can also do that as shown below.
    this.font.weight = "bold";
    Here I have hard coded the font name and weight. If you want to do this dynamically, you can store the font name in a custom table and then assign it in the layout.

  • Schedule lines are not getting generated during MRP Run

    Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
    Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
    Can any one help me and suggest me what to be done in this case .
    Thanks & Regards ,
    Nirmalya

    Dear,
    Welcome to SDN,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
    Regards,
    R.Brahmankar

  • Schedule lines are not in sink for PO

    Hello Everyone,
    We are using ECS.
    So we create PO in SRM with some schedule lines and transfer it to the ECC system.
    But sometimes the schedule lines are not in sink on both the sides because buyer update the schedule lines on SRM side.
    So we need to check that is schedule lines in SRM and Basic quantity in SRM are same or not?
    So is there any OSS note to check this?
    Regards,
    Khushbu.

    Hi,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

  • Lines are not generated for holidays and sundays

    Hi
    creating a sale order shcedule lines are not generated for sunday for a particular plant .
    Schedule lines are generated for subsequent monday only.
    the plant calander  is also  correct
    with regards
    partha

    Hi
    I would really double check the factory calendar ans the  of the plant and sales organisation
    regards,
    Sidi

  • Photos are not printing

    Photos and graphics are not printing from web browsers.
    Is there an OS or Safari setting that makes 10.4.10 print only text from my G4 1000x2 MDD?
    Lazerjet 5M, ethernet.
    I've looked in the printer dialog and didn't see anything...

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

  • Cyan and yellow are not printing on HP officejet pro 8500 all-in-one printer A909

    I have an Officejet Pro All-in-One 8500 A909a printer, using OS X operating system.  Cyan and yellow are not printing. I've ran the Print Quality Diagnostics Page and they do not show up there or on the align page. My ink levels are good. 
    Can you help me find and fix the problem?
    Thanks

    Hi DavidM2,
    Welcome to the HP Forums.
    I see that you are having issues with the Cyan and the Yellow ink cartridges as well.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If you are still having issues then try to replace the cartridges.
    Let me know how you make out and if you have any other questions, feel free to ask.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • PL/SQL log messages are not printing from Java concurrent program

    Hi,
    I have a strange issue while submitting the Java concurrent program through PL/SQL.
    I have a PL/SQL concurrent program which will invoke the Java concurrent program inside the package by use of "FND_GLOBAL.SUBMIT_REQUEST". It worked and submitted successfully. From that Java concurrent program we are calling some other PL/SQL packages and printing some log messages over there. But problem here is the request is only printing the Java log messages in view log but not the PL/SQL log messages.  But if I submit the Java concurrent program directly from SRS form at that it is printing both Java and PL/SQL log messages.
    I am just wondering how the log messages has not printed. Please provide your inputs to solve this problem.
    Thanks
    Suriya

    I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
    Any suggestions.
    FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
    https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Upgraded to CS5 Illustrator form CS3 Illustrator. Colors are not printing correctly in CS5

                                                I have just recently purchased CS5 Premium Suite.  I am working with Illustrator.  When I print my CS3  Illustrator files in CS5 the colors are not printing correctly.  Is there a way to fix this problem

    I've been doing more troubleshooting since I wrote this post. I've now tried printing from a non-Adobe app and I'm getting the same margin error. So it is definitely a Xerox issue and I have a tech coming out on Monday.
    The reason I originally figured it must be an CS5 issue is because just two weeks ago when I was using CS2, our landscape-oriented programs were printing with .25" margins as they should. Then last week after upgrading to CS5, the inside page (2nd page) was noticeably out of whack and shifted to the right (not left). But when I started trying to troubleshoot this week, everything started shifting to the left.
    The only thing different between those two weeks was the fact I updated to CS5.
    But obviously, my printer as decided to go to crap in more ways than one all in a two week period. Hopefully the tech can sort it out next Monday.
    Thanks!
    Christi

  • Barcodes are not printing

    Hi,
    We have a printronix printer model Printronix T5304 with the device type added LB_PRI. The requirement is Barcode printing and i have added the 2 Barcodes ZUCC_LA
    ZUCC_SP to this device type but still the Barcodes are not printing. Can you suggesst me is there any other device type that i can use to test. I would request you to check the belwo output status also.
    Output status: The status of the output request is showing complete and the spool list showing the barcodes but when physically printing barcodes are not printing only numbers are printing. I checked the entry has been correctly updated in print controle area. But not sure how to change the character format to match in the sapscript.
    Regards
    Dellibabu

    Hi Deli
    Hope you are using the new bar code technology while creating the barcode in SE73. This could be the possible reason for the barcode not getting printed.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
    Hope this helps.
    Regards
    Neeraj

Maybe you are looking for