Smartforms main window is not extending as it was made as a second window

My Requirement is smartform coof two pages in which second one is an annexure.
the second page should come for all the reports.
now my first pages main window is not extending as it was made as secondary window.

I created from scratch, it works well with dynamic text with both 0 and 200 lines (setup in initialization code):
|__ %PAGE1
|   |__ TEXT with dynamic text &GT_TLINE&
|   |__ COMMAND : GO TO %PAGE2
|__ %PAGE2
    |__ TEXT with text element "LAST PAGE"

Similar Messages

  • Windows could not search for new updates after applied June 2014 Windows Updates - Error code 80244004

    After applied June 2014 Windows Updates from Microsoft (Not using WSUS server to obtain WU), our Windows Server 2012 R2 and Windows Server 2008 now getting this error message when we perform the "Check for Updates":
    Windows could not search for new updates.  Error code 80244004. 
    Richard

    Hi Richard,
    Just addition, please refer to following KB to reset Windows Update components and monitor the result.
    How do I reset Windows Update components?
    If didn’t use ESET security software, please also refer to following thread and check if can help you.
    Latest
    version of Windows Update causing error 80244004
    Hope this helps.
    Best regards,
    Justin Gu

  • Siri window does not display and app was destroyed with latest 6.1 update

    This happened right after the last update to 6.1. Press the button and hold it. You get a beep but no SIRI window. Otherwise it will do as you tell it to.
    There are numerous other bugs. Go into Purchased apps. Cannot select an app on the second row left, second one down from the top. eith the one above it displays or the one below it.
    The update also destroyed an expense tracking app, Pocket expense which had a substantial amount of data in it. Press on the app icon and it flasehes and does not run.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"
    If neither of these work you may have to restore your ipad via iTunes on your computer.

  • A window opens with ASSERT: gBrowser.addProgressListener was called with a second argument, which is not supported. See bug 608628. Stack Trace: 0:addProgressListener([object Object],2) 1:() 2:([object Event]) In Minefield

    A Balloon window pops up before Minefield opens. I have to "X" it of "OK" it 3-4 times then Minefield opens.

    That is a known problem, it will require add-ons to be updated. I believe they are planning on moving the error message to the error console rather than having the dialog pop up.

  • I have multiple monitors. So I usually have 2-3 Firefox windows open.. Recently my addons are only showing up on the first window open.. No bookmarks or anything on the second window.

    This just started a couple days ago. Can't pinpoint it to anything...

    OK on the iMac now but not sure how to send the System Details. Any help welcome.

  • Script error: Window does not have a constructor: 324

    File-script-image processor then a script error: Window does not have a constructor:324
    trying to run a batch to resize photos and this happens everytime.  Same thing is said in all options under script.

    photoshop cs6 extended running on windows 7 home edition.
    i wanted to resize images, so i opened photoshop clicked file-selected scripts-selected image processor.
    every video i have seen to resize a few images says this is how you do it, then input some data. and you resize the images.
    But after i select image processor i get an error. 
    Script Alert: "Something major has happened and I can't continue.  Would you like to see more information?"
    I select yes
    Script Alert: "ReferenceErorr: Window does not have a constructor:324"
    If I select scripts event manager, it says the same thing
    If I select load files into stacks it says "Error 22, Window does not have constructor.  Line 388 var w= new window (res)
    If I select statistics I get the same error message.
    So nothing under scripts works.

  • Adobe Bridge CS5 in windows 7 not working?

    Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
    Tried to install creative cloud..again some error. Error code : 82
    Could you please advice how I can fix my adobe bridge.

    https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
    please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

  • Firefox window will not scale down past 420px wide

    For some reason on both my work Mac and home Mac I am unable to shrink my browser window past 420 - 425px wide. Both computers are using mavricks. It does not matter the website. I disabled all addons and toolbars. Updated me version. But have had no luck. Even if I try and resize viewport with developer tools the window will not shrink past 425px

    That was caused by a Bug fix for a new minimum width window size.
    See this - https://support.mozilla.org/en-US/questions/980033#answer-510995

  • Firefox Browser window will not open or start.

    Sorry that this is long, but I wanted to make sure you knew as much as you needed to know.
    I click on the icon in my Windows taskbar, and the firefox browser window will not open.
    This was not the first of my problems. At first, Firefox would open immediately, but soon afterward, it began to slow, and soon, it took around 10-15 seconds for the browser window to start.
    Now it won't start at all.
    I will admit that I go all addon-happy on Firefox, but these extensions have never been a problem before. Here is the list:<br />
    <pre>ReaditLater
    ReloadEvery (this one doesn't work anymore, but I did have it once)
    Ookong
    PriceBlink
    StumbleUpon
    SimilarWeb
    WOT
    XMarks (I didn't use it much)
    NoScript (I recently uninstalled that one, but that might have a factor in it. That thing was WAY too powerful!)
    CoolIris
    CoolPreview
    AdHacker
    AdBlock
    AdBlockPlus
    PersonasExpression
    AntBar
    ABE (I'm not sure if this was an extension, but I know that there was
    alot of security-type addons from the Paranoid Kit, which is a
    list of addons on the addons webpage.)
    </pre>
    Oh yeah, one more thing! <br />
    I recently installed a GameVance installation thing. I'm not sure what it did, but could've had a virus in it that surpassed my security. I use Avast, if that's important at all. That thing was hard to uninstall, so I had to go back to the site to get the uninstallation software.
    I tried to use the firefox.exe -ProfileManager thing, but it kept crashing, so it was useless.
    Please help me fix this. I love Firefox. It's the only browser that allowed you to use the most addons! Plus, ALL MY STUFF IS ON THERE! I'd hate to have to change browsers (and I REFUSE to use Internet Explorer!)

    See http://kb.mozillazine.org/Browser_will_not_start_up
    Create a new profile as a test to check if your current profile is causing the problems.
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Window will not maximize

    I'm running CC 2014 and the window will not maximize. I even try manually enlarging the window, but Indesign snaps the window size back down to the smaller size. FYI... I just updated to the latest version of CC2014, and the issue is still present.

    Two monitors, OS X 10.10.2, MacBook Pro (Retina, 13-inch, Mid 2014), 3GHz Intel Core i7, 16GB Memory

  • BLACK SCREEN stating "windows could not start because the following is miss

    I installed Bootcamp update 2.1 and then XP SP3.
    Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
    I tried to use the option key and insert the Windows CD but it won't start up.
    Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

    Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I just force powered off & booted into Mac.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
    Sure is annoying,
    Good luck!

  • HP Pavilion dv7 6b57nr windows can not continue

    after system recovery with hp recovery disc windows will not load completely   After setup for first use the wecome screen loads to the point of says welcome  then windows can not continute comes on.   
    HP Pavilion dv7 6b57nr windows 7

    You can get some of the original software & drivers from your Support page HERE
    If the copy of Windows you have is already activated on another machine you may need to install the version that matches your license key attached to bottom of laptop. 
    If you can read the 25 character Microsoft Windows 7 license key attached to your laptop ,download a Windows 7 ISO file to burn to a DVD for the version that is listed on the Microsoft COA sticker. 
    Link to the W7 ISO file downloads:
    http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
    Get ImgBurn to burn the iso image to cd
    Or use the Windows 7 USB/DVD installation tool to convert the ISO file to a Windows installation on DVD or USB flash drive.
    http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
    Use the 25 character product key on the PC to activate the installation.
    Next go to your support and driver page to install the drivers you need.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • My macbook air keeps on saying Microsoft windows are not supported on os x...what do i do?

    my macbook air keeps on saying that windows does not support OS X
    what do i do?

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

    I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

    Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

  • Main window box is not extended

    Hi Experts ,
    I am working scripts. In main window  I draw box , using below box command.
    BOX XPOS '0.0' CM YPOS '0.0' CM WIDTH '3' CM HEIGHT '1' CM FRAME 10 TW
    BOX XPOS '0.0' CM YPOS '0.0' CM WIDTH '6' CM HEIGHT '1' CM FRAME 10 TW
    BOX XPOS '0.0' CM YPOS '0.0' CM WIDTH '10' CM HEIGHT '1' CM FRAME 10 TW
    BOX XPOS '0.0' CM YPOS '0.0' CM WIDTH '13' CM HEIGHT '1' CM FRAME 10 TW
    BOX XPOS '0.0' CM YPOS '0.0' CM WIDTH '16' CM HEIGHT '1' CM FRAME 10 TW
    My issues is , when Item line is one, it is working fine.
    But if item lines 2 to 10 records, My box was not extended.
    So please give me solution.
    Thanks,

    point 1, wrong forum, see the moderator message right on top of this forum.
    2. well you are drawing hard coded boxes of height 1 and various width´s.
    Sure the will come only for item 1, for item 2 you´d have to draw new own boxes.
    Since you cannot be sure about the height of a position, you had to code these dynamically, which is possible but quite a task.
    Anyway it is NOT advicable to work with boxes on line-item level. at least not with SAP-Script.
    with smartforms you have an easy time doing this, while in SAP-Script you may come quite near to desperation.

Maybe you are looking for

  • Closed port for torrent with no iptables.rules

    I have a home system with internet connection over a router. Firewall in the router seems to be disabled. I had installed guarddog and selected all the protocols that I need. There is no iptables in deamons line of rc.conf nor there is any iptables.r

  • Disk Utility Problems

    Just tried to open Disk Utility and after appearing in the Dock, bringing up the window and saying "Gathering Disk Information..." it crashes.  Tried to open it several times, and the same thing happened each time.  The crash report is below: (Possib

  • Issue with Uploading OTF converted PDF file on application server...

    Hello Gurus, I want to download otf converted pdf data on application server. I am using following but it does not work ? data: i_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,         wa_pdf_tab like tline, CALL FUNCTION 'CONVERT_OTF'     EXPORTING  

  • Can't create a file by using BufferedWriter

    Hello, I am going to create a new html file "C:\test1.html" by modifying the old file "C:\test.html". However I have not seen the file in the c driver. Thanks for any help. import java.awt.Point; import java.io.*; import java.util.*; public class Add

  • Proper way to handle people raising dead threads?

    Someone just 'bumped' a thread from 2008 Re: Problem providing download link for BLOB data in apex report What is the polite way to handle this? thanks MK