Smartforms: Old versions used for automatic message emails

Dear all,
I have created several custom smartforms (copies of "CRM_REMINDER_MAIL) to generate reminder emails via actions for processor and reported-by.
I have originally uploaded these these smartforms, reworked them several times and newly activated them each time as usual.
However, in some cases, an old version of a smartform is sent out from the action, even though it was overwritten by a newer one that already worked since weeks!
I could not tie it to a special situation, e.g. a specific sender or destination address.
Is this a known problem? Any known issues with language or client dependencies?
Thanks for your help!
Christoph

Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"

Similar Messages

How to delete obsolete email addresses for automatic messaging?

I have two addresses for a contact, one correct (JohnDoe @gmail.com) and one incorrect (JohnDoe @gmail.net). I have corrtected John Doe's contact information. However, when I enter the name John Doe for the Sent To, I still get both email address for John Doe. mostlikely held in memory for automatic messaging. I want to get the wrong email address from showing up as a choice. How do I do this?
I assume automatic messaging is holding the wrong email address in memory.
<Email Edited by Host>

Hello, might check this...
Mail>Window>Previous Recipients, highlight the ones you don't want & click the Remove from list button.

Sound alert for Nokia Messaging email

Hi
I am using Nokia X6 and this is about the nokia messaging email. Earlier I used to get a email alert notification (sound) when a new mail used to come. But now it is not coming. Every 5 mins i keep checking if i got a new mail manually.
Tried resetting the phone to factory setting. Still not getting
Even checked the setting at the location:-
menu -> settings ->personal->profiles->general->personalise-> email alert tone (email2.acc). But this setting seems to be for "mail for exchange" (the one in message folder) and not for nokia messaging email.
Any pointers to solve this would this be of help
Thanks
Phani Krishna

You've checked to see if you have notifications muted ? That will mute notification sounds (including games), but the Music and Videos apps, and headphones, still get sound.
Depending upon what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute/unmute notifications by the switch on the right hand side of the iPad above the volume switch (if that setting is set to 'notification mute'), or via Control Centre (setting set to 'rotation lock') : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via Control Centre instead : About the iPad Side Switch - Apple Support

Unable to validate message; key used for decrypting message is invalid;

When trying to decrypt an RNIF message in our SAP XI system we are running into an issue with below error message:
"Unable to validate message; key used for decrypting message is invalid; expected keystore entry: SSL-<SID>; keystore entry used: null"
The keystore administrator role is mapped to XIAFUSER. We validated the decryption using the J2EE Private Key thru a third-party (non-SAP) tool and it works fine. The keystore SSL-<SID> contains the Private Key and Cert from our CA. The message was encrypted using the Public Key of J2ee engine.
We were unable to generate more details even after increasing the log level. The security.log is the only place showing the above error message.

The folder C:\j2sdk1.4.2_13\jre\lib\security contains the Java Cryptography Extension (JCE) files - 'local_policy.jar' and 'US_export_policy.jar' .The default files will have a size of 3 kb.These need to be replaced by JCE Unlimited Strength Jurisdiction Policy Files - 'local_policy.jar' and 'US_export_policy.jar' which are of size 5kb. In brief, C:\j2sdk1.4.2_13\jre\lib\security should contain the files - 'local_policy.jar' and 'US_export_policy.jar' and their size should be 5kb (and not 3kb). After we did this change the decrypt worked fine.

After I backed up and restored my device I cannot open the app (Good for Enterprise) that I use for my work email??

After I backed up and restored my phone I cannot open the app I use for my work email (Good for Enterprise)? It opens and immediately shuts down.

did you try deleting the app and reinstalling it?

HT5312 Whose email address do you use for your rescue email?

Whose email address do you use for your rescue email?

My own.
That is the point of the rescue e-mail

How to suppress old version WF for Old notifications

Hi all,
We r using the customised WF for notification QM01.We had created the deadline monitor and send mail to corresponding user by checking the deadline, this is the outstanding message to the user.It was working fine.Now we did the changes in the logic for deadline monitoring by adding the notification status in the logic, if it is deleted don't consider to check for deadline and not required to send the outstanding mail.Now the prob is for one notification WF has already triggered with old version in which we didn't considerd the status.And the deadline monitoring messages were kept in loop up 49 times.After dat we did the changes in deadline monitoring by adding the status.Now the notification got deleted but then also the system considering the old version(deadline monitoring with out considering the status) and sending the outstanding messages.How can i manage to deactivate the old version of WF for the old notification it self.
Thanks

HI,
If the workflow instance is no longer required, you can logically delete the workflow through SWIA else you can manually complete the workitem so that deadline is no longer valid.
Regards,
Sangvir

Tried to update itunes when it goes to uninstall the old version pops up error message saying sowftware not found, tried to update itunes when it goes to uninstall the old version pops up error message saying sowftware not found

i tried to update my itunes and when it goes to uninstall the old version it pops up a error message saying the software for it cannot be found. does anyone know how i can fix this?

when it goes to uninstall the old version it pops up a error message saying the software for it cannot be found.
What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)

TS3212 can't download new iTunes version; old version blocks it; error message "network resource is unavailable" iTunes.msi

Can't download latest iTune version on my PC with Vista 64bit. Old version blocks it. Error message: "......network resource that is unavailable" references "iTunes.msi" How do I remove old version?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

My iphoto program was messed up so I dragged it to trash and down-loaded it again. now when I open it , it says I can't open my library with my old version, use my new version. How do I get to my new version when it is the only one there?

My iphoto program was all messed up so I properly uninstalled it, I have a good back up. When I reinstall iphoto from my iwork disc it installed Ok, but when I clk on the icon it says that my library is unavailable, use the new iphoto. What is the problem? If I go to applications the same thing happens, I can't access Iphoto!

You reinstalled an old version of iPhoto after you updated your library to the newer version.
Update ALL your software and try again.
Click the Apple Menu at the upper left-hand corner of your screen and select "Software Update..."
Repeat until it tells you there are no more updates.
AND, launch the App Store application located in your Applications folder to see if there are any updates there as well.

Can't reset password for apple ID I use for iCloud because email is no longer in use and cite refuses to accept answer to security question. What do I do?

I can't reset the password for the apple id I use for iCloud because the associated email address is no longer in use and the site does not accept my answer to the security question. What should I do?

Welcome to the Apple Community.
If you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your account/security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Auto update location of missing files? (like old versions use to)

When a song came up missing previous versions, once you found the location old versions of itunes gave you the option of auto-updateing the other songs in that album that were also missing. it appears that 7.02 doesn't do that. Anyone know a way around this or the new way to auto update the new location? Syncing isn't doing it.

Thanks...perfect...works in both Win and Mac version.

How can I change my primary email address to the one that I use for my rescue email address?

I no longer use the email address associated with my apple ID account and the rescue email address I used is now my primary email address for everything, since it its not allowing me to just simply change my email address since its my rescue email address i want it changing to, can it be done and how?! :S Thank you!

You will need to remove it as your rescue email : log into your account via the 'manage your apple id' button on http://appleid.apple.com, select the 'Password And Security' section on your account's screen, and answer the two security questions that show - you should then be taken to another screen where you can change or remove your rescue email address.
Then try logging out of your account and then log back in and see if you can then use it as your primary email address.

WSDL version used for port creation in SOAMANAGER for Netweaver 7.01 SP-5.

Hi,
Does SOAMANAGER refer to a particular version of WSDL while creating the logical ports for consumer proxies. I'm asking this because after one of the upgrades in our ECC system we find that the authentication configurations of the port are automatically done based on the WSDL now, however this was not the case earlier.
Also logical ports created manually are giving runtime exception (Soap FAult Code : 1). Does logical ports creation necessarily have to be done from WSDL.
Please throw some light on the above, if any of you have faced this issue already.
Regards,
Avishek.

We got a reply from SAP that from NetWeaver 7.0 SP3, logical ports will be created based on Security policy mentioned in WSDL. We can however override this by creating the port manually and the SOAP fault code error can be resolved by manually entering the SOAP Action for each method of the Service in the 'Operation Specific' tab of the Logical Port details.

Old ISBN used for New Titles MM to CO - Int Order - Amoratization Query

Dear Gurus
Kindly need some assistance on the issue, now sure if its the right forum - Regarding transferring Production order to CO Order Int Order Amoratisation Query.
The business have unfortunately reused over 40 material when they should have created new ones.
From an MM viewpoint it is not advised reusing materials. New material numbers should have been created. However as stock has now been receipted and sold it is not possible to use a new material number.
These materials originally had stock transferred from other materials onto batch and valuation 01. This was fully sold but now the Business have re used the materials with a new description and a new Production Order created.
Because stock was previously transferred onto batch 01 via - old prod order it appears the business have created the Production orders for batch 02 which has been Goods receipted against. However the business have added the costs to an Internal order batch 01 not 02.
So essentially our batch and valuation numbers for the production order and internal order are out of sync. Would this cause a problem.
I believe the Business want to know if the goods receipt they have done against Production order 02 viewed via MMBE - Stock Balances will trigger the amortisation of the costs on First cost order 01 Internal Order.
Because the production has already been sold and GR, we will need to look for a solution going forward, so the business does not encounter this problem again.
Thanks
Rick
Edited by: Rick Desilva on Jan 26, 2011 9:05 PM

Dear Gurus
Kindly need some assistance on the issue, now sure if its the right forum - Regarding transferring Production order to CO Order Int Order Amoratisation Query.
The business have unfortunately reused over 40 material when they should have created new ones.
From an MM viewpoint it is not advised reusing materials. New material numbers should have been created. However as stock has now been receipted and sold it is not possible to use a new material number.
These materials originally had stock transferred from other materials onto batch and valuation 01. This was fully sold but now the Business have re used the materials with a new description and a new Production Order created.
Because stock was previously transferred onto batch 01 via - old prod order it appears the business have created the Production orders for batch 02 which has been Goods receipted against. However the business have added the costs to an Internal order batch 01 not 02.
So essentially our batch and valuation numbers for the production order and internal order are out of sync. Would this cause a problem.
I believe the Business want to know if the goods receipt they have done against Production order 02 viewed via MMBE - Stock Balances will trigger the amortisation of the costs on First cost order 01 Internal Order.
Because the production has already been sold and GR, we will need to look for a solution going forward, so the business does not encounter this problem again.
Thanks
Rick
Edited by: Rick Desilva on Jan 26, 2011 9:05 PM

Smartforms: Old versions used for automatic message emails

Similar Messages

Maybe you are looking for