Smartforms output in XDF format within single spool

Hello,
i have created a form which is called by a custom report.
The report selects the data for different customers of the same company code and
is then calling the form. The form is only opend and closed once for each run of
the report:
Open form
    output 1
    output 2
    output n
Close form
The result is exactly one spool request (in OTF format).
Now i changed the output options before calling
the form (output_options -> structure SSFCOMOP):
output_options-xdfcmode = 'X'.
output_options-xdf = 'X'.
output_options-xdfoutmode = 'S'.
output_options-xdfoutdev = 'IDS3'."->output device of type PLAIN
The result was a regular spool request in OTF format.
Within a debugging session of the generated function module
of the used form i learned that in case of multiple outputs into the same
spool request the above output options (for XDF output) are completely ignored
(or not used).
Is this behaviour intended by SAP or is this simply an error
in the generated code of the smartforms function module?
Regards,
Ralf Matthies

Similar Messages

I have a problem in converting smartform output to pdf format.

Hi,
While converting the smartform output to pdf format.
It is showing this error.
otf end command // missing in otf data.
I have used this function.
Assigning the OTFDATA to OTF Structure table
    CLEAR gt_otf.
    gt_otf[] = gs_otfdata-otfdata[].
Convert the OTF DATA to SAP Script Text lines
    CLEAR gt_pdf_tab.
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
        max_linewidth         = 132
      IMPORTING
        bin_filesize          = gv_bin_filesize
      TABLES
        otf                   = gt_otf
        lines                 = gt_pdf_tab
      EXCEPTIONS
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        OTHERS                = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Please help me in this regard. Thanks in advance.

Hi ,
I am getting this exception "err_conv_not_possible"
CALL FUNCTION f_name " '/1BCDWB/SF00000092'
      EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
        CONTROL_PARAMETERS       = st_control_parameters
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
     OUTPUT_OPTIONS             = st_output_options
USER_SETTINGS              = 'X'
        ZST_TEXTSYMBOLS            = ZST_TEXTSYMBOLS
        wa_kna1                    = wa_kna1
        wa_claim_header            = wa_claim_header
   IMPORTING
     DOCUMENT_OUTPUT_INFO       = st_document_output_info
     JOB_OUTPUT_INFO            = st_job_output_info
     JOB_OUTPUT_OPTIONS         = st_job_output_options
      TABLES
        IT_CLAIM_VERSION           = IT_CLAIM_VERSION
        IT_CLAIM_ITEM              = IT_CLAIM_ITEM
        IT_CLAIM_PARTNER           = IT_CLAIM_PARTNER
        IT_FINAL                   = IT_FINAL
   EXCEPTIONS
     FORMATTING_ERROR           = 1
     INTERNAL_ERROR             = 2
     SEND_ERROR                 = 3
     USER_CANCELED              = 4
     OTHERS                     = 5
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ELSE.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
      EXPORTING
         USE_OTF_MC_CMD               = 'X'
    ARCHIVE_INDEX                =
      IMPORTING
      BIN_FILESIZE   = v_bin_filesize
      TABLES
      OTF = st_job_output_info-OTFDATA[]
      DOCTAB_ARCHIVE = it_docs
      LINES = it_lines
      EXCEPTIONS
      ERR_CONV_NOT_POSSIBLE = 1
      ERR_OTF_MC_NOENDMARKER = 2
      OTHERS = 3.
      IF sy-subrc <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDIF.
HERE when i tried to debug it i got SY-SUBRC = 1.
Please help me in this regard. Thanks in advance.

Can anybody tell me the way of getting Smartform output as xml format??

Dear Experts,
Can anybody tell me the way of getting Smartform output as xml format??
Is there exists a standard way of getting it?
Regards,
Nikhil Jain

Hi,
Use function module FB_DOWNLOAD_FORM .
Provide your form name as input for i_formname.
you will get the output in xml format.
or use utilities--> download option for downloading in xml format.
For your referrence:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0b6bc290-0201-0010-5b87-a0e7c7eb55d0?quicklink=index&overridelayout=true
May it helps you.
Regards.
DS

Smartforms output in Powerpoint format

Hi ,
I am an ABAPER working in CRM Module .Also working in PCUI . I got a requirement for CRM Portal where I need to display the Smartforms output in Powerpoint format when user clicks on Print button. Previously there are in PDF Format.Can anyone help on this ?? Please..

Hey Anil
Your requirement is not specific ,weder you want the output saved in XLS format in the smartform....or u want to download the data in XLS format?
1. Function Module 'SAP_CONVERT_TO_XLS_FORMAT' : from internal table to Excel file .
2. FM ''SO_DOCUMENT_REPOSITORY_MANAGER' : To attach this file as an attachment in a mail in this pass the file and other details of sender and receiver.
Regards
Swapnil
Edited by: swapnil kamble on Sep 11, 2009 2:12 PM

SMARTFORMS output in XLS format

Hi,
We are in ECC 5.0, and have a client requirement to show the smartforms output in XLS format.
Could you please advice or suggest various options to do this?
Appreciate the response,.
thanks much in advance,
Anil
Edited by: Rob Burbank on Sep 10, 2009 5:05 PM

Hey Anil
Your requirement is not specific ,weder you want the output saved in XLS format in the smartform....or u want to download the data in XLS format?
1. Function Module 'SAP_CONVERT_TO_XLS_FORMAT' : from internal table to Excel file .
2. FM ''SO_DOCUMENT_REPOSITORY_MANAGER' : To attach this file as an attachment in a mail in this pass the file and other details of sender and receiver.
Regards
Swapnil
Edited by: swapnil kamble on Sep 11, 2009 2:12 PM

Conversion of smartform output to DOC format

Hi,
I have a requirement to convert Smartform output to DOC format. Could anyone provide me any direction for this?
SS

Hi SS,
In the link sent by Anki Reddy... you can follow the same but in this FM change PDF to DOC thats it.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'DOC' * Change from 'PDF' * to DOC
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
Regards,
sg

Smartform Printing in XDF format

Dear all experts,
I was trying to print out the smart form in XDF format. I accessed to Spool List (SP01) to view the result but the output shown on screen is truncated. After printing it, I went to AL11 to see the output file, however, only single line of truncated string shown on screen. Is there anyway configurations or checking that I should do to solve this problem?
Thanks.

Within SP01, viewing the spool request, I see the following characters:
═䑆ⴱ⸳ഊ◢팍ਲ⁯扪
祰攠⽔祰攱ഊ>
〰‱〰〠㄰〰‵>
‱〰〠〠〠〠>
㈰‷㈰‷㘰‷㘰>
⽁獣敮琠㜲>
ਯ䱡獴䍨慲′>
㔳㠠㔳㠠㠵>    Etc....
EDIT: I note that when I submit this post, the characters change. I'm seeing 'symbols' mainly, some Asian characters (the form should be in English).
When printing, it comes out with something like:
%PDF-1.3
%aDuE
2 0 objtype /Type1
/BaseFont /H00 1000 1000 520 1000 74 1000 0 0 0 0
/CapHeight
     /LastChar 255
%Charwid8 592 779 650 650.   etc
/F002 6 0 R
Date=(0000000)
@SAP_OB    End TOA_DARA
>>
endob00327 00000 n
and so on...
For now we would like to validate the PDF printing before modifying any new print programs to automate the process.
Thanks-
Message was edited by: Chad Carter
Message was edited by: Chad Carter

Smartforms output in XML format

Hi everyone,
I am very new for smartforms and my requirement to convrt given smartform in XML format, I am going through
Form Attributes -> output options -> output format -> XSF output , then I am giving proper value in output mode & in Output Device but not getting proper output, can You please tell me what i have to do (in Detail ) ?
Thanks & Regards,
Vimarsh B.

Hi Abhinay
I have billing order invoice, client is getting its output in standard format but now he needs the output of that form has to come in XML format, if we are using standard output format in form attributes, its showing output but when we are chenging its option we are not getting any output, only one spool create, and we are not able to understand what exactly output will come, it will come same like standard format or only spool will create and if only spool create then how we can send it to our client. please solve this issue, thanks for ur support.
Thanks & Regards,
Vimarsh B.

Smartforms output in HTML format

Hi Experts,
I want to save my smartforms in HTML format.Is there any Standard programe is available for it.
Like as RSTXPDFT4 for converting output in PDF format.

Hi,
Check this link.In that,I am converting the output of smartform to PDF and then attaching it through mail.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/smartforms/smartform in abap.pdf

Logo in Smartform output to pdf format is coming as Junk Character

Hi All,
I have a requirement to generate the Smartform output in PDF file. But when i am doing that i am getting the LOGO as Junk character in the PDF file. Can any one help me to resolve this issue?.
Thanks,
Muruganand.K

Yes check the spool and the output displayed correctly in the spool it means there is a problem when you convert OTF to PDF. Check that part of the code and try different options.

Smartform output in word format

dear all
i have created a smartform which needs to send to external mail ID.s as an .doc attachment.
how to do this. even i have no basic idea also. kindly help out.
regards

Hi,
You cannot convert the smartfrom to word doc for this sap has not provided any provision, Instead you can convert to pdf and send as email.
You can check my reply in this thread..
[convert smartform output to pdf |Re: convert smartform output to pdf]

How to Convert spool which is for smartform output to PDF?

how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,

<b>Procedure</b>
     When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
<b>Here is a sample code of program to perform the function.</b>
SAMPLE CODE
[code]*&---------------------------------------------------------------------*
*& Report ZAMIT_SMART_FORM_PDF                                        *
REPORT ZAMIT_SMART_FORM_PDF                    .
data: carr_id type sbook-carrid,
      cparam type ssfctrlop,
      outop type ssfcompop,
      fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
      pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
      tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
      file_size TYPE i,
      bin_filesize TYPE i,
      FILE_NAME type string,
      File_path type string,
      FULL_PATH type string.
parameter:      p_custid type scustom-id default 1.
select-options: s_carrid for carr_id     default 'LH' to 'LH'.
parameter:      p_form   type tdsfname   default 'ZAMIT_SMART_FORM'.
data: customer    type scustom,
      bookings    type ty_bookings,
      connections type ty_connections.
start-of-selection.
***************** suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook   into table bookings
           where customid = p_custid
           and   carrid in s_carrid
           order by primary key.
select * from spfli into table connections
           for all entries in bookings
           where carrid = bookings-carrid
           and   connid = bookings-connid
           order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
       exporting formname           = p_form
*                 variant            = ' '
*                 direct_call        = ' '
       importing fm_name            = fm_name
       exceptions no_form            = 1
                  no_function_module = 2
                  others             = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
* calling the generated function module
call function fm_name
       exporting
*                 archive_index        =
*                 archive_parameters   =
                 control_parameters   = cparam
*                 mail_appl_obj        =
*                 mail_recipient       =
*                 mail_sender          =
                 output_options       = outop
                 user_settings        = SPACE
                 bookings             = bookings
                  customer             = customer
                  connections          = connections
      importing
*                 document_output_info =
                 job_output_info      = tab_otf_data
*                 job_output_options   =
       exceptions formatting_error     = 1
                  internal_error       = 2
                  send_error           = 3
                  user_canceled        = 4
                  others               = 5.
if sy-subrc <> 0.
*   error handling
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   format                      = 'PDF'
   max_linewidth               = 132
*   ARCHIVE_INDEX               = ' '
*   COPYNUMBER                  = 0
*   ASCII_BIDI_VIS2LOG          = ' '
IMPORTING
   bin_filesize                = bin_filesize
*   BIN_FILE                    =
TABLES
    otf                         = tab_otf_final
    lines                       = pdf_tab
EXCEPTIONS
   err_max_linewidth           = 1
   err_format                  = 2
   err_conv_not_possible       = 3
   err_bad_otf                 = 4
   OTHERS                      = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
*    WINDOW_TITLE         =
*    DEFAULT_EXTENSION    =
*    DEFAULT_FILE_NAME    =
*    FILE_FILTER          =
*    INITIAL_DIRECTORY    =
*    WITH_ENCODING        =
*    PROMPT_ON_OVERWRITE = 'X'
CHANGING
    filename             = FILE_NAME
    path                 = FILE_PATH
    fullpath             = FULL_PATH
*    USER_ACTION          =
*    FILE_ENCODING        =
* EXCEPTIONS
*    CNTL_ERROR           = 1
*    ERROR_NO_GUI         = 2
*    NOT_SUPPORTED_BY_GUI = 3
*    others               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*************downloading the converted PDF data to your local PC********
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   bin_filesize                    = bin_filesize
   filename                        = FULL_PATH
   filetype                        = 'BIN'
*   APPEND                          = ' '
*   WRITE_FIELD_SEPARATOR           = ' '
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
IMPORTING
   filelength                      = file_size
TABLES
    data_tab                        = pdf_tab
*   FIELDNAMES                      =
EXCEPTIONS
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   OTHERS                          = 22
IF sy-subrc <> 0.
ENDIF.
[/code]
Thanks and Regards,
Pavankumar

Converting Smartforms output content into HTML File

Hi,
I have a requirement, Smartforms output contents needs be converted as HTML File and it should be sent as email.
I am able to get the Smartforms output in html format but the output is shown as binary format.
After the fm call the job_output_info parameter is holding the smartforms output content in
job_output_info-XMLOUTPUT[]           (xsf content)
job_output_info-XMLOUTPUT-STSHEET[]   (css content)
job_output_info-XMLOUTPUT-TRFRESULT[] (html content)
Help me out how to handle the job_output_info details to html format.
Code
DATA v_fm_name TYPE rs38l_fnam.
DATA v_tdsfname TYPE tdsfname VALUE 'ZVR39_SF'.
DATA output_options TYPE ssfcompop.
DATA job_output_info TYPE ssfcrescl.
DATA document_output_info TYPE ssfcrespd.
DATA job_output_options TYPE ssfcresop.
DATA w_control TYPE ssfctrlop.
*-Finding the Smartform Layout Name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = v_tdsfname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
*-Defining the output to HTML Format
*-Activating XSF Output
output_options-xdfcmode   = 'X'.
output_options-xdf        = space.
output_options-xsfcmode   = 'X'.
output_options-xsf        = 'X'.
output_options-xsfoutmode = 'A'. "
output_options-xsfoutdev = 'P863'.
output_options-xsfformat = 'X'.
*-Calling the Smartform Layout
CALL FUNCTION v_fm_name
EXPORTING
    output_options       = output_options
    user_settings        = 'X'
IMPORTING
    document_output_info = document_output_info
    job_output_info      = job_output_info
    job_output_options   = job_output_options
EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
Giri

Hi,
Check this link.In that,I am converting the output of smartform to PDF and then attaching it through mail.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/smartforms/smartform in abap.pdf

Converting smartforms output into PDF

Hi ALL,
How to convert the smartforms output into PDF based form. After executing the form, it should directly open in PDF. How to do this?
Points will be awarded.
Thanks and regards,
vinoth.

Hi Vinoth Kumar,
Please go throuh the below procedure and sample Code, this might help you.
Procedure
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
*& Report ZAMIT_SMART_FORM_PDF                                        *
REPORT ZAMIT_SMART_FORM_PDF                    .
data: carr_id type sbook-carrid,
      cparam type ssfctrlop,
      outop type ssfcompop,
      fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
      pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
      tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
      file_size TYPE i,
      bin_filesize TYPE i,
      FILE_NAME type string,
      File_path type string,
      FULL_PATH type string.
parameter:      p_custid type scustom-id default 1.
select-options: s_carrid for carr_id     default 'LH' to 'LH'.
parameter:      p_form   type tdsfname   default 'ZAMIT_SMART_FORM'.
data: customer    type scustom,
      bookings    type ty_bookings,
      connections type ty_connections.
start-of-selection.
suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook   into table bookings
           where customid = p_custid
           and   carrid in s_carrid
           order by primary key.
select * from spfli into table connections
           for all entries in bookings
           where carrid = bookings-carrid
           and   connid = bookings-connid
           order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
       exporting formname           = p_form
                variant            = ' '
                direct_call        = ' '
       importing fm_name            = fm_name
       exceptions no_form            = 1
                  no_function_module = 2
                  others             = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
Hope this resolves your query.
Reward all the helpful answers.
Regards
calling the generated function module
call function fm_name
       exporting
                archive_index        =
                archive_parameters   =
                 control_parameters   = cparam
                mail_appl_obj        =
                mail_recipient       =
                mail_sender          =
                 output_options       = outop
                 user_settings        = SPACE
                 bookings             = bookings
                  customer             = customer
                  connections          = connections
      importing
                document_output_info =
                 job_output_info      = tab_otf_data
                job_output_options   =
       exceptions formatting_error     = 1
                  internal_error       = 2
                  send_error           = 3
                  user_canceled        = 4
                  others               = 5.
if sy-subrc <> 0.
error handling
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   format                      = 'PDF'
   max_linewidth               = 132
ARCHIVE_INDEX               = ' '
COPYNUMBER                  = 0
ASCII_BIDI_VIS2LOG          = ' '
IMPORTING
   bin_filesize                = bin_filesize
BIN_FILE                    =
TABLES
    otf                         = tab_otf_final
    lines                       = pdf_tab
EXCEPTIONS
   err_max_linewidth           = 1
   err_format                  = 2
   err_conv_not_possible       = 3
   err_bad_otf                 = 4
   OTHERS                      = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
   WINDOW_TITLE         =
   DEFAULT_EXTENSION    =
   DEFAULT_FILE_NAME    =
   FILE_FILTER          =
   INITIAL_DIRECTORY    =
   WITH_ENCODING        =
   PROMPT_ON_OVERWRITE = 'X'
CHANGING
    filename             = FILE_NAME
    path                 = FILE_PATH
    fullpath             = FULL_PATH
   USER_ACTION          =
   FILE_ENCODING        =
EXCEPTIONS
   CNTL_ERROR           = 1
   ERROR_NO_GUI         = 2
   NOT_SUPPORTED_BY_GUI = 3
   others               = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
************downloading the converted PDF data to your local PC*******
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   bin_filesize                    = bin_filesize
   filename                        = FULL_PATH
   filetype                        = 'BIN'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
IMPORTING
   filelength                      = file_size
TABLES
    data_tab                        = pdf_tab
FIELDNAMES                      =
EXCEPTIONS
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   OTHERS                          = 22
IF sy-subrc <> 0.
ENDIF.

Display ALV list output in PDF format

Hi All,
My requirement is :
I am displaying output using Function module 'REUSE_ALV_LIST_DISPLAY'. then i will click one button which placed in application tool bar say 'Download to PDF' when i click this button it will display the output in PDF format. I tried with exsting threads but i unable to get suitable solution.Anybody can send me the sample code please.
Thanks in advance.
Maheedhar

please go throuh the below procedure and sample Code, this might help you.
Procedure
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
cparam type ssfctrlop,
outop type ssfcompop,
fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
file_size TYPE i,
bin_filesize TYPE i,
FILE_NAME type string,
File_path type string,
FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
bookings type ty_bookings,
connections type ty_connections.
start-of-selection.
suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
where customid = p_custid
and carrid in s_carrid
order by primary key.
select * from spfli into table connections
for all entries in bookings
where carrid = bookings-carrid
and connid = bookings-connid
order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = p_form
variant = ' '
direct_call = ' '
importing fm_name = fm_name
exceptions no_form = 1
no_function_module = 2
others = 3.
if sy-subrc 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
calling the generated function module
call function fm_name
exporting
archive_index =
archive_parameters =
control_parameters = cparam
mail_appl_obj =
mail_recipient =
mail_sender =
output_options = outop
user_settings = SPACE
bookings = bookings
customer = customer
connections = connections
importing
document_output_info =
job_output_info = tab_otf_data
job_output_options =
exceptions formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc 0.
error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final] = tab_otf_data-otfdata[.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
************downloading the converted PDF data to your local PC*******
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc 0.
ENDIF.
Check this link it will help you.
https://forums.sdn.sap.com/click.jspa?searchID=5950895&messageID=2375150
Reward points if useful.

Smartforms output in XDF format within single spool

Similar Messages

Maybe you are looking for