SmartForms Print Doc
Hi,
In SmartForms How to print backside of the page is there any condition ,pls send me detailly?
Thanks,
hi ,
Supposing u have three pages first , last and the back page. Change the print mode to d for the last page it interprets next page as the back page and do not change the attributes of print mode to d.
I hope this information is useful.
Nisrin.
Similar Messages
-
HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page. I continually get a message that the computer cannot communicate with the printer. Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else.
Each time I want to print, I must reboot the computer. After reboot I have one chance to print. This problem started February 15, 2015.
My operating system is Windows 8.1. I have unintalled the HP software, rebooted, then reinstalled the software:
OJ8500_A910_1315-1.exe
HP Print and Scan Doctor - HPPSdr.exe
HPSupportSolutionsFramework-11.51.0049.msi
All versions were last downloaded on April 4, 2015.
I have a home wireless network (Ubee DDW366 router). All other devices in the house will print to the 8500A printer without issues: 2 Toshiba laptops, 2 Android phones, and 1FireHD.
The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working. The card and Windows 8.1 were installed on January 3, 2015.
I have run virus scans and malware scans. Each time they show there are no issues with my desktop. What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer. ASUS Motherboard P6X580 Premium. Now I will probably get hacked!
I am at my wits end. And it is frustrating when I need to make a print of something and the system locks up. I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed. Also this is a time consumer.
This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
Help?
Addendum: I can scan using HP Printer Assistance. I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds. I have no trouble with scanning.
This question was solved.
View Solution.Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
I am losing my mind! I am trying to generate printed doc for
the sole purpose of sorting a bunch of pages in hard copy to
rethink the organization of one part of my projects. Ironically,
every time I generate the printed doc (i've done it about 20 times
so far), these pages are nowhere to be found! I've included them in
the TOC, I've moved them out of a book within a book, I've deleted
them from the TOC and added them to a book that is generated as a
chapter. I've renamed the book to remove non-alpha characters. I've
deleted the book and created a new book with a completely unrelated
name. NOTHING I do will get these pages to print. SO - I have 175
pp. document of the 175 pages that DONT need to be printed and I
can't for the life of me print the +/-20 pages that are the ones I
want in hard copy.first, I am using RH version X5.0.2.
1. On your Project tab, all the way at the bottom, open the
Single Source Layouts directory. Double click on Printed
Documentation.
2. Set up your doc name, path, and build expression as
needed. Click on Next.
3. This next window is where you can select any or all topics
to include in the printed doc. It defaults, I believe, to all
topics and chapters. Just select each chapter or topic you do not
want and click on the left-pointing arrows to move these topics out
of the list on the right side of the window. Only the topics and
chapters listed in the right side (under chapter layout) will
print. This selection window works much like the Browse Sequencer
tool.
4. When all appropriate topics are excluded / included, click
on Next. In this window, you are establishing the sections of the
resulting doc - set up sections as needed. If you aren't publishing
this doc for distribution (just for yourself), I wouldn't worry too
much about this step. Click on Next.
5. The last step before the doc generates is to determine
which Styles set you will use - the styles you use in RH, or a Word
Style set. Again, since this is just for you, don't sweat it. I
just use the Project's CSS Styles (select this option from the menu
at the top of the window).
6. Click on Finish, let 'er rip, and see what comes out. -
Smartform printing on Dot Matrix printer for continuous stationery
Hi Friends,
I'm throwing my smartform print output on printer using local printer .Now the problem is as i have designed the SF using A4 page size , the output on Dot matrix is my output (WHICH IS 1/3rd OF a PAGE) + rest of empty space which is actually wasting pages.
Settings in SPAD are as follows:
Output device : Lp01
Device type : SWIN
and page format : LINE_21
Format Type : LINE_21
What i want is a restricted output .please let me know the possible solutions and do i need to load the driver for my printer in SAP as well (Printer is : wipro WEP 800 DX)
Thanks and Regards,
Sachin SoniHi,
Change the page settings in the form
-> under the form attributes you can find the page format there you can set up your required format
Thanks,
Nethaji. -
Unable to print doc as .pdf with Adobe reader XI
Unable to print doc as .pdf with Adobe reader XI in windows 7. Tried uninstalling the software and also repair with same result. When clicked on print doc the option to print as .pdf cannot be seen. It just does not appear in the printer option. Help pls.
cooljolu wrote:
ya downloaded the trial version of acrobat. I guess it was free earlier and never faced a problem.
Acrobat has NEVER been free. Reader (formerly called "Acrobat Reader") has always been free, but the Creation/Editing software has always had a price tag. -
Hi all,
please tell me how to print documents (.pdf , .doc , .xls , .jpeg, .gif, .bmp) with java coding
i have tried like this ..
try {
// Open the input file
InputStream is = new BufferedInputStream(
new FileInputStream("C:\\Documents and Settings\\3041\\Desktop\\New Folder (2)\\00.pdf"));
PrintService service = PrintServiceLookup.lookupDefaultPrintService();
DocFlavor[] flavors = service.getSupportedDocFlavors();
for (int i = 0; i < flavors.length; i++) {
System.out.println(flavors.getMimeType());
// Create the print job
DocPrintJob job = service.createPrintJob();
Doc doc = new SimpleDoc(is, DocFlavor.INPUT_STREAM.PDF, null);
// Print it
job.print(doc, null);
is.close();
} catch (PrintException e) {
System.out.println (e);
} catch (IOException e) {
System.out.println (e);
which prints all images properly but not doc or pdf files please help how to print PDF or DOC files
Edited by: getzkk on Oct 8, 2007 7:31 AM
Edited by: getzkk on Oct 8, 2007 4:02 PMWell, the ability to convert the pdf to html and then to PDF is a worthy solution.
10,000 emails would require a batch convert solution.
This is very much beyond what I know. I'll have to leave this to better minds.
I could suggest a third party tool. Have a look at this:
http://a-pdf.com/faq/can-i-split-pdf-file-with-nonstandard-page-size.htm
Other than that,I can't think of anything else.
Gene -
Conditional build for chm and printed doc produce different outputs
I'm using RoboHelp HTML 9.0.2.271
In my TOC, I have two "books" of topics that I want to exclude from output because the topics won't be required at this time.
I right-clicked each book in the TOC and applied a condition ("Defer").
For the HTML Help (.chm), I made my build expression say NOT Defer and NOT Comment.
I generated the help.
The two books (and their topics) were excluded, as I expected.
For printed documentation (.doc), I made my build expression say NOT Defer and NOT Comment and NOT Online.
I generated the Word doc.
The two books were NOT excluded; they appeared in the printed doc.
The workaround is to delete them from the Chapter Layout window when I generate the printed doc, but I expected that since my build expression said to NOT include them, that they wouldn't be included.
Is my method wrong, or is it my expectation?You're right (of course!). My .chm file does actually contain those topics.
So, applying a condition to a TOC entry and then excluding it in the build has this effect:
HTML Help file (.chm): Now the topic entry will not appear in the TOC. The topic itself still exists in the .chm file, though, and you can find it by searching.
Printed output (Word): There doesn't seem to be any effect. That topic entry still appears in the Word TOC and the topic itself still exists in the .doc (or .docx) file.
So, to exclude a topic, I have to place the condition on the topic itself, by either right-clicking the topic in Project Manager and applying the condition or by opening the topic and applying the condition. Then I have to exclude that condition in the build.
Do I have it right yet? :-) -
Smartform print program for order confirmation
Hi experts.
I am looking for a smartform print program for order confirmation.
The order confirmation in standard is a script with the name RVADOR01 and I tried to copy and change but I don't know which to eliminate and whcih to keep it.
If any body written the program already please provide me or provide the link to check.
Thanks in advance
Saithis is the processing form.
form processing.
data: lf_fm_name type rs38l_fnam.
data: ls_control_param type ssfctrlop.
data: ls_composer_param type ssfcompop.
data: ls_recipient type swotobjid.
data: ls_sender type swotobjid.
data: lf_formname type tdsfname.
data: ls_addr_key like addr_key.
data: document_output_info type ssfcrespd,
job_output_info type ssfcrescl,
job_output_options type ssfcresop.
perform get_data.
check retcode = 0.
perform set_print_param using addr_key
changing ls_control_param
ls_composer_param
ls_recipient
ls_sender
retcode.
*Get the Smart Form name.
if not tnapr-sform is initial.
lf_formname = tnapr-sform.
else.
message e001(/smb40/ssfcomposer).
endif.
determine smartform function module for invoice
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = lf_formname
importing
fm_name = lf_fm_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
error handling
retcode = sy-subrc.
if sy-subrc = 1.
message e001(/smb40/ssfcomposer).
endif.
if sy-subrc = 2.
message e002(/smb40/ssfcomposer) with lf_formname.
endif.
perform protocol_update.
endif.
call function lf_fm_name
exporting
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
is_nast = nast
is_vbdka = vbdka
is_addres = addr_key
importing
document_output_info = document_output_info
job_output_info = job_output_info
job_output_options = job_output_options
tables
it_vbdpa = tvbdpa "Item information
it_vbdpau = tvbdpau "Subitem numbers
it_vedpa = tkomservp "Contract Item Validity
it_vedka = tkomservh "Contract Header Validity
it_vedpn = tkomservpn "Contract Item Cancellation Data
it_vedkn = tkomservhn "Contract Header Cancellation DA
exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
retcode = sy-subrc.
perform protocol_update.
get SmartForm protocoll and store it in the NAST protocoll
perform add_smfrm_prot.
endif.
endform. "processing -
I can no longer print docs sent or downloaded to me in Adobe. This has been going on for about 4 months, and prior to that there was no problem using the system. The documents show on my screen as printing, but nothing happens. The one doc i am tyring to print now says it is printing and then sAys there is an error in the doc and to contAct the person who created the pdf. Since it is a form Used by many people, I doubt that is the problem.
I pay for tech support for my computer and contacted them. I was told the
Adobe file was corrupted and they installed another free program, Foxit, on
my computer. Documents automatically default to that program now and I am
able to run them off.
Thanks for responding.
Joan,
In a message dated 7/5/2013 12:30:53 P.M. Pacific Daylight Time,
[email protected] writes:
Re: Printing docs
created by MichaelKazlow (http://forums.adobe.com/people/MichaelKazlow)
in Adobe Reader - View the full discussion
(http://forums.adobe.com/message/5479825#5479825) -
Name on print doc for Physical inventory.
Hi All,
When our user run the Trx MI21 for printing the PI doc ... Print doc contains "created by XYZ user " . The XYZ user is not exist in the system . The PI doc belongs to year 2004.
Is it possible to get the ''created by " on the print doc other than the user XYZ who created PI .
Regards,
Amarathe created by is the user who has created the PI doc e.g. with MI01 or MI31 transaction.
The one who executes MI21 does not do anything to the document than printing an already existing document that was created by a different user.
Of course an ABAPer can do all kind of changes to form and programm, but do you really think that it is worth for documents that were created back in 2004? -
Include Security Deposit Request in Aggregated Print Doc.
Hi Experts,
I have this scenario, where I posted SD request at contract account level posted using FPSEC1. (Contract account of a supplier in deregulated market with no contarct)
Requirement is to include this request in the print document.
I have maintained entries in table TE514 for RF doc (Item Selection in Account Maintenance/ Define Sub-Items)
When I am preparing a print doc for the aggregated posting using EA10_AGGRBILL it is not picking up the security deposit request in the aggregated print doc.
Is it possible to include the security deposit request in aggregated print doc ?
Please advice.
Thanks
SatyajeetHi Devang,
As mentioned I have maintained the following entry in TE529 customising table. Let me know if I have missed anything cause I am not getting the required output.
ClrType/Clearing Cat./ Main Trans./ Subtransaction/ Open item sel./ Print interval/ Print item/ Items in BST/ Debit Position/Transfer/No Posting/ Defer Item/ Interest Items
R4/ 0001/ 0020 / / / 000 / B / / X/ / /
RF/ 0001/ 0020 / / /000 / B / / X/ / /
Thanks
Satyajeet
Edited by: Satyajeet on Feb 24, 2011 1:54 PM -
Generating a print doc deletes other docs in the same directory
Generating a new doc into a directory that contains a different doc generated off the same Word template causes the older doc to be deleted.
MY RH8 project is set up with a number of Print Documentation SSLs, one for each chapter of a book, all to use styles from the same Word template. Each SSL has the same Location selected, so all the chapters are by default created in a common directory, where each can be tweaked as needed and later all merged into a single PDF for distribution.
But as each doc is generated, the previously-generated doc in that directory disappears. The newer and older files have different file names, were generated by different RH Printed Documentation SSLs, but the SSLs refer to the same Word template. If a previously-generated doc is still open in Word when I generate the next, then I get the "[template name] is locked for editing" prompt, I select "Open a Read Only copy", it runs on to completion, and then both docs are present in the directory as expected.
The selected output can be doc, docx, or pdf, and always the earlier file is deleted. The selected Location in which the files are created can be inside the project or outside the project. It makes no difference whether the template's properties are set to Read-only.
An obvious workaround is to copy each file out to a different directory as soon as the file is generated. But RH deleting differently-named files is so obviously a malicious thing to do, I can't be working it right. Any ideas?When you generate a Print Doc SSL, a log file with name <ProjectName>.log is created along with the generated word doc(s) in the output folder. This log file contains the name of the previously generated word doc(s). When a Print Doc SSL is re-generated, it read the name of previous word doc from the log file and deletes it and creates a new word doc with possibly new name given in the SSL settings.
So, this is the normal behaviour of RoboHelp and works correctly if each Print Doc SSL is generated in separate folders. But when all the Print Doc SSLs are generated in the same output folder then the current SSL reads the log file of the previous SSL and hence deletes the previously generated word doc in that output folder.
Workaround:
1. RoboHelp has an option to generate individual Word Document for each Chapter, it can be used instead of Multiple SSL with one Chapter each.
2. If you can't use the first option for any reason, then delete the <ProjectName>.log before generating the each Print Doc SSL. -
Printed doc topics listed in WinXP Recent Documents list
I recently upgraded to RoboHelp 9 from 7. I generated a printed doc and each topic is listed in the Recent Documents list in Windows XP, as follows:
The file names all begin with $HtmlDoc_Chapter_... By the way, these files can't be found once you click one of the names. It looks like some temporary files made during generation. The point is, I don't want them in my Recent Documents list. How can I prevent this from happening?
Thank you.Am I right in thinking you are generating a Master Document and Sub Documents?
The problem here is that RoboHelp has to create a number of temporary documents in the process and Word notes any documents created. I doubt that RoboHelp can stop Word doing what it is set up to do. There is no interface option so pPlease follow this link and report it as a bug or feature request, depending on your point of view.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Duplicated topics in printed docs
Is there a way to prevent RoboHelp from duplicating topics in
the Print Document Content - Printed Documentation dialog when
generating printed docs? I just noticed my PDFs have doubled
topics. I'm going back and manually deleting them on the dialog.
How did they get duplicated in the first place?Hi Gina,
One cause of duplicated topics in your printed documentation
is having topics linked to books in the TOC. If a topic is linked
to a book and also appears separately within the book, it will
appear twice in the printed output.
If that's not the cause, someone else might be able to help.
Have you checked out all the info on Peter Grainge's excellent
site? He's got a whole section on printed documentation. His site
is
www.grainge.org.
Anne -
RH 10: not use Master Page in Printed Docs
I have a Master Page set up with a company logo and horizontal rules, which works great with the help topics. The problem occurs when I generate printed docs from the source files.
Everything else works well enough to get by (I have some tweaking to do), BUT every single topic shows up with the rules and the company logo. I don't see anywhere to NOT apply the Master Page to the printed output. Is there a secret to not using the online help layout in the printed docs?
thanks,
AliaMaster page headers and footers 100% guaranteed do not survive the trip to printed documentation. My guess is that in the master page your "headers" and "footers" have been created in the body section of the master page.
Create a new topic attaching that master page in the process. Then unlink the master page from that topic. Do you still see the header and footer? If you do, my theory is proved. If you do not, post back.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Maybe you are looking for
-
If I use an adapter (female VGA to mini-DVI) for my iMac 10.4.11 OSX, I also need a cable. Should that cable be female VGA to male VGA? Permanent vertical lines have appeared on my display, and connecting to another display (monitor) requires a cable
-
How to make the navigation tree icon in an advanced datagrid to expand in different columns
Hi All , I am using an application built using Flex 3 . In my application I am using an AdvancedDataGrid for datadisplay. And the hierachy is like this Tree structure in advanced datagrid at present : Header 1 Header 2 Header 3 Header 4 Header 5 Pare
-
Hi I have a requirement like this pasted below to calculcate the weighted average. A B C=B*A Wtd avg 2 300$ 600$ 1.92 1 200$ 200$ (1250$/650$)=1.92 3 150$ 450$ 1.92 Overall Result: 6 650$ 1250
-
Unity Connection 8.6 Mailbox Store Issue
Hi, I am seeing an alert in Unity Connection Mailbox Stores that" This mailbox store is at or over 90% of its capacity ". Also i have set the Aging Policies, but still no results. Anyways to reduce the size by deleting any other unwanted files. Pls
-
Non-Blocking SocketChannel read give Connection timed out
Hi, My program is using Non-Block NIO SocketChannel for both Server and Client sides. However, if the connection between server and client has been idle for a while, when the client try to communicate with server, it gets blocked for a while (15 minu