Smartforms Tray01 Tray02 print problem

Hi,
I have created a smartform with 2 pages.
My frist page should print from TRAY 01 of pritner and Second page should print TRAY 02.
For this i have assigned the TRY01 in page 1 as Resource Name and TRY02 in page 2 as Resource Name.
But this is not printing. i am using LP01 as printer name.
Please let me know why it is not picking TRY02 for the second page data.
Thanks in Advance.
Regards,
Balu

Hi
Tray info can also provided on the output device. Check the tcode SPAD> output deice> LP01--> tray inof.
Please remove all the tick makrs if any applied. and try
Regards,
Aditya

Similar Messages

Smartforms footer window printing problem

Hi ,
As i have many line types records in footer window but i need to print all footer window's record in last page only.
Could you please suggest or give any condition for footer window on the same.
Regards
Alok

hi ,
i have also tried the same method but still i m not able to see footer window in last page only again i have create new window below the main window and cut the footer window's item and pasted in to new window.
Please give me the another way to resolve this issue.
Regards
Alok.

Regarding Print Problem in Smartform O/P

hi all,
I am Printing one smartform O/P. Print Preview is coming correctly in two pages. But When i am taking print First Page is Overlapping with some contents of Second Page ( in Stationary ).
What will be the probelm. I am not getting any idea. Plz Suggest.
Thanx & Regards
Rami

Hi,
check ur printer settings.
Also check form attributes -> output options -> page format and other setting?
Is it dina4 and ur printer page size is A4 ?
There may be some conflict in page size of form and actual page size.
Regards

Smartform Printing Problem for double sided printing

Hi Techies,
I have created a smartform for invoice printing, using double side printing.
The requirement is that in the front page, page number has to be printed and at the back side static text is to be printed. So if my line items exceed to two pages. Than in printing, it is getting priinted as "Page 1 of 4" for the 1st invoice items page and "Page 3 of 4" for the second items page. But the client is asking it to be printed as "Page 1 of 2" & "Page 2 of 2" respectively.
Currently I am using Page&SFSY-PAGE& of &SFSY-FORMPAGES&.
Can anyone guide me how to achieve this requirement.
Thanks & Regards,
Vinit.

Hi vinit,
better u declare your own variable . and check with sfsy , the footer window must be final window
data : lv_page type sfsy-page,
lv_tot_page type sfsy-page.
if sfsy-formpages > 2.
lv_tot_page = sfsy-page / 2.
if sfsy-page >2
lv_page = sfsy-page - 1.
else.
lv_page = sfsy-page.
endif.
else .
lv_page = sfsy-page.
lv_tot_page = sfsy-formpages.
endif

Smartform - text not printed bold

Hey guys, hope anyone can shed some light on this.
We have invoices with a smartstyle attached, using font Verdana.
Some texts are marked as bold in the smartforms.
Now, my problem:
When printing from any environment (DEV, PRD) using one of the printers configured in SAP, text marked as bold is not printed in bold.
When printing the same invoice using LOCL, and sending it to the exact same printer from windows, text marked as bold is printed in bold.
So I guess it's not the form, it's not the style, it's not even the printer: just the printer settings in SAP.
In many ways, it is very similar to the issue addressed in this thread:
[Printer Setting|Printer Setting] , except that when previewing the text doesn't show as bold.
My question is two-fold:
- How likely is it that this issue is related to the printer configuration (and thus, basis config)?
- If yes to the above, how do I verify this? I need something solid, since the SAP basis guys aren't very cooperative and keep pointing out that it's either the smartform or the smartstyle - without researching themselves
Thanks in advance.

Hi,
I think its the issue of the basis people,they need to make the settings. We had a similar problem here,we had to change the printer settings in SPAD,affter the basis peole had made the settings for us, for taking printout in hindi.
Thanks.

Using Smartform after preview print with a selection screen

Hi experts,
     I am facing with some smartform printing problem.
    Here is the problem:
    We develop an add_on program for printing some FI report and we use F:Front end Printing in SPAD Access Method.
    The problem that we faced is: After enter the TCODE, we select preview into the smartform window.( Display is all right) At this window, when we click Print Icon, the output request directly sent to the printer and the page printed out without giving a selection window for selecting Printers and printing page range (Like standard print configuration).
    What we want is that after displaying the FI report in smartform, we could select the print page range and printers in user's PC.
    Appreciate for your valuable advice.
BR,
Derek Yang

Hi,
You have to set PREVIEW = 'X', before you see print preview.
Try this way
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname = 'ZTEST_SMARTFORM'
    IMPORTING
      fm_name = fm_name.
DATA:ssfctrlop TYPE ssfctrlop.
ssfctrlop-preview = 'X'. "Needs to be set this. It shows dialog window to set print parameters
CALL FUNCTION fm_name
    EXPORTING
      control_parameters = ssfctrlop
    TABLES
      it_nfal            = it_nfal.
Thanks
Venkat.O

Standard SMARTFORM for Check Printing/ Payment Advice

Hi All,
I have one important question...
Standard Script Check Print Program = RFFOUS_C
Standart Script Layout Name = F110_PRENUM_CHCK
& F110_D_AVIS
We have to modify it as per client requirment.
But I want to know the Standard SMARTFORM & Standard Smartform driver Program for CHECH printing & payment advice ?????????????
Is there no Smartform for check printing or if exist then please guide me?????????????????

hi umesh,
1)anyone can help me,while extending idoc,i added one segment to idoc by extending debmas.that segment has two fields.while populating data to idoc,i am getting problem like VSV0001.exit is not allowing me to write the code.
plz anyone can help me on this issue.if you did't understand this problem plz tell me how to extend the idoc.more concentration on while populating the data in to idoc.like which function module i have to use.in customer master idoc.debmas.i am new to this environment.plz help me.like complet work till completion of task.
2)and my next assignment is in smartforms.plz let me know .i was created the screen.according to that screen.i have to make print program.plz tell me how to give the text elements.
like we have given in scripts, page window and then F9 to give the text elements.and make the program.like that any one can tell me clearly.how to make the complete smartforms programs.
plz this requirement is very very urgent,plz could you send it for my [email protected]
advance thanks for your help.
thansk&regards,
radhiks.

Unable to print chinese characters in Smartforms use Zebra printer

Hi,all.
My printer is Zebra ZM400 300dpi,I created a new output device 'TestDevice' and use the Lzeb3 Device type.
In my smartofrms i used the Zebra command to rotated text.Now the smartforms counld not print chinese characters but '#' instead.(style font 'ANDALE_S')
Anyone could help me....
Thanks Advance.
Andy Lee.

Hello Andy,
If you use the device type LZEBU3 with font ANDALE_S, then when you print then the SAP system
send a print control for activating the ANDALE font installed on the printer, and the text should
be outputed over this font.
When you get # during print then this means that the device type or the SAP font don't support
this character(this was the original problem), when you get a "space" then this means that the
font which is used by the printer don't support this character.
I think this can have 2 causes in your case:
1. The SAP system use the print control SF000 when you use ANDALE_S, which contains
the print control ^CI17^F8 in HEX form. This should activate the ANDALE font on your printer.
(You can find this under tr. SE73 -> Printer Fonts -> LZEBU3 -> ANDALE_S)
You should check wheter this is the correct print control. You should find on the printer an option
which list you all installed fonts, and also the print control which can be used for activating it.
Compare this print control from the printer with the above print control from the SAP system.
If you see a differnce then change the print control in the SAP system.(Before you do that please
copy the device type LZEBU3 into customer namespace, don't change the original SAP device type)
2. The font installed on the printer don't support the character which you use. Contact Zebra to confirm this, and ask for a ANDALE font which supports the character.
Best regards,
Norbert

Font color of smartform incorrect when printing

Hello,
I have created a new smartstyle with different fontstyles. For one window in my smartform, I need a word printed in very big letters and in grey.
When I look at my print preview, the letters are big and in grey, as they should be.
But when I print it, the color of the letters is always black!
When I´m printing about "LOCL", but on the same printer, the letters are shown correctly in grey!
Does anybody know something about this problem?
Thank You
Michael

Hii
Try the following
Step1:
Is your table header defined separately means as a separate template. Then check Template Node -> Output Options --> Check Shading.
Step2: Check the Window in which the table defined.
Step3 :
Table Node -> Output Options Tab--select Header --> Set Shading as 0 and Apply/Set and dothe same for all the columns defined in Header.
Step4:
Please check the pattern used for table (May be you have used pattern contains shading) to another pattern.
Try printing your smartform onto another printer, maybe using another driver. If you get the correct shading then, you have to either find another driver for your printer.you have to live without shading. Some high-volume printers (like ours) can only print black and are not able to do any shading.

Airport Extreme Printing Problem with HP Deskjet.

Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4 Mac OS X (10.4.4)

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Crystal report printing problem in Malayalam

Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!

Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

Print problems. Printing out an email the text starts half way down the page. I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem. If anyone has any ideas I would really apreciate it. Thanks Penny

One more thing to check: System Preferences/Print & Scan. Make sure your printer is set as Default.
I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

My "fix" to print problems in LR (using MS XP)

Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
- Athlon 64 3500+ with 2 GB RAM
- Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
- Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
- Microsoft XP service pack 2
- Adobe Photoshop Lightroom 1.3.1.
- Adobe Photoshop Elements 5
- Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
- ICC profiles for various Epson printer paper
- Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
I used following setting:
- In printer driver: "No color management" was selected
- LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
. LR Print sharpening: High
- LR Print resolution: 360ppi
When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
Good luck!
/Per

Little unclear about the border thing- you say it prints with a too wide border, but also say:
When I print the image with this set up, it still is printed without a border.
It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

Smartforms Tray01 Tray02 print problem

Similar Messages

Maybe you are looking for