Smartforms user specific problem
Hi
I have a developed a smartform with two page , when i am excetuing this smartform from my user-id next page is not coming but when I executing this same form with another user-id it displying both the pages . can you please tell me where is the problem.
Thanks & Regards
Girdhari
Hi,
Please look at the Printer of both users. This problem may arise when different printers are allocated for different users.
Look at the print-preview screen of both users.
If Printers are different for both users, then contact to Basis person.
Regards,
Keyur.
Similar Messages
-
Strange user-specific display problem
I use my MacBook with an external AG Neovo F-419 19"screen. I have one screen at work and another at home. It works beautifully except for one strange phenomenon: when I log into my account and watch the screen during start up, whereas it starts out having nice even-contrast graphics with a good color range, as the boot progresses it goes through two changes. At the first change the color balance changes, probably reflecting a calibration that I have done in the past kicking in from the Display Preferences info. But then it goes through a second change in which the contrast becomes extreme and the color range perhaps reduced and this then stays and I cannot reverse it by changing the settings in Display Prefs (I can alter the contrast, brightness, color balance etc. but I can't restore the normal color and contrast whatever I do). Bizarrely, however, I can restore things to normal just by rotating the screen and then Reverting to normal orientation.
This is user specific as it doesn't happen if I login as another users and it reappaears when I log back in (andagain gets undone by rotating the screen). It seems not to be a function of a particular Display Profile as I have tried changing them and deleting, ditto for the Prefs file in my User Library. Moreover, the external display does not need to be connected - it happens when I use the Macbook on it's own, which is very annoying because then I cannot rotate the screen to get rid of it!
If anyone has any ideas I would be very grateful as I do not want to transfer thousands of files into a new User account (I should say that I thnk this problem first arose in Tiger when I had another machine and it has migrated along with the User settings!!). Help!!
AndyHi,
I think you can only display a maximum message of 128 characters. There is also another function module SCCA_TH_POPUP which also has a message size of max 128 characters.
Danish. -
Problem in user-specific search results
Hi All,
I have created an index which is indexing the docs properly. Now, I written a code to show user-specific docs using index management API's..
I have used an EP5 current user.
ISearchResultList results = session.getSearchResults(1,session.getNumberResultKeys());
In the following stmt, I am getting the proper value for session.getNumberResultKeys(), but still ISearchResultList size always is zero.
Is there anything I am missin in code or its a configuration problem??
I have full control permissions to index as well as to repository folder..Can someone plz get me out of this problem..Its urgent
Thanks & Regards,
UditHi Udit,
I got the solution for the problem. Here is the code I am using and its working great. Just give a try
com.sapportals.portal.security.usermanagement.IUser user = null;
user = (com.sapportals.portal.security.usermanagement.IUser)request.getUser().getUser();
response.write("<html><head><title>Search</title></head><body>");
ResourceContext c = new ResourceContext(user);
try {
IIndexService indexService =
(IIndexService) ResourceFactory
.getInstance()
.getServiceFactory()
.getService(IServiceTypesConst.INDEX_SERVICE);
SearchQueryListBuilder sqb = new SearchQueryListBuilder();
sqb.setSearchTerm("valero");
IQueryEntryList qel = sqb.buildSearchQueryList();
// get an instance of federated search
IFederatedSearch federatedSearch =
(IFederatedSearch) indexService.getObjectInstance(
IWcmIndexConst.FEDERATED_SEARCH_INSTANCE);
List indexList = new ArrayList();
String index = null;
if (index != null && index.length() > 0) {
// take a specified index from index= parameter
indexList.add(indexService.getIndex(index));
} else {
// take all available indexes
indexList = indexService.getActiveIndexes();
// it is recommended to use a search session object
// for searching execution
ISearchSession session = null;
if (session == null)
session = federatedSearch.searchWithSession(qel, indexList, c);
this.renderResultHeader(response, session, indexList);
// get all results from the search session
ISearchResultList results = session.getSearchResults(1, session.getTotalNumberResultKeys());
response.write(" from session => " + results.size() + " and size is : " + results.toString());
Here it will print the size of the ISearchResultList, the problem is the user we are passing to ResourceContext is not proper. -
Hello, we have strange problem with some user master records.
One user has user accounts in two systems: QAS and PRD.
Both of the accounts are identical (sap_all, parameters ...) because the QAS client is a copy of production client.
But user account behaviour in the systems is not the same!
For example, some transactions prepare reports and output it in Excel. In QAS the user can get the excel reports but in production client not. And so on...
Also if we do copy of user account by tr. SU01 the new user has no any problem.
What the user specific customizing exist in sap system? Where these customizing can be located?
We just know about SU01... but all is ok there. Where else?Hello, as I said user master records in QAS and PRD are identical and parameters tab too.
Please tell me where are other user specific settings in sap system? -
Hello experts ,
I have used the Function module 'TH-popup' to give an user specific popup . But I can show a message less than 128 char by this Function module. Is there any other way by which I can print user specific popup longer than 128 char ?
Deb .Hi,
I think you can only display a maximum message of 128 characters. There is also another function module SCCA_TH_POPUP which also has a message size of max 128 characters.
Danish. -
How to restrict users to not default layout while creating a user specific?
Hi all,
I have a problem with frequent changes in report layout setting. When users trying to create a user specific layout in the window "Default" is set, out of "User specific" & "default" checkbox defaultly, so users saving the layouts. so it's overwritting on existing layout. we are ossing the old data. how to restrict end users to create new one with out changing the existing one.How to change that default check in "Default" check box to user specific defaultly. where i have to do settings for this. Thanks in advance.
PradeeshHi ,
My problem is still not resolved. I tried applying the people picker property and set a specific field(an email id field) to be available to only admins. Now the field is not visible to the normal users but only admins which is good but that email field
should be able to take normal users as wel as admin's email ID. currently due to the people picker property it only takes admin's ID and not normal user's ID - which is not as per expectation.
What this email ID field does is - when a normal user is logged in he/she wont see this field in that view. But when an admin logs in he/she can switch to admin view and see this field . The admin can put any user's ID in this field and pull out the required
resource's Time Report for modification.
Please let me know how do i overcome my problem. Detailed step description will be very helpfull .
As per Cameron's suggestion (add a rule on the "additional admin section") , i am not sure how exactly that is done. Would help a lot if i got to know how this works.
Regards,
Guru -
Setting user specific contract data while creating sales order using BAPI
Hi all,
I am creating sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2.
Now my problem is that there is no structure for contract data (i.e. VEDA), system automatically set contract data using customization values.
I am doing some validations on cotract data in MV45AFZZ which fails, because these validations are performed on standard values, user specific values r not set.
How to handle this issue, your small clue may help a lot.
Regards,
S@meerHI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar -
Hi
We are assign the specific lay out for specific user the system is not allowing to save the data the following is the error description
User-specific layouts must start with a letter (A-Z)
kinly let me know if this is the authorisation issue
the functional consultant can able to do the setting
please provide the solution
thanks in advance
Regards,
Jyothihi
thanks for solution
i am followed the same
but still the problem is same
exactly what iam doing is
once we entered the screen there is some standard layout is picking the system that is 0SAP
Than iam selecting the choose button and selectin gthe layout 3SAP
than iam saving the data
system ids giving the pop up and there iam selecting the reqired layout and selecting the check mark user specific and saving the data . removed the even after 3 in 3asp
but still the problem is same
kindly explian me the procedure if iam wrong
thanks in advance -
Hi Guru's,
I have one ALV z-report.
I have created two layout which is user specific.
At the time of selection of layout system is allowing me only default setting and the field of user specific is showing gray.
What will be the problem?
Can anybody help me for this?
I want to assign that layout to my specific user.
But in the std report e.g. MB51 system is allowing me to assign layout at user specific.
Thanks & Regards,
Nilesh Ithape
9967166393Hi Nilesh,
As you are telling it is Z-Report,definitely problem may be with coding. Consult your technical people over there or post this in ABAP related forum.
Regards. -
User specific settings in SSM_CUST table
Dear experts,
i know it is not a right forum for post this thread but i am not able find to right forum for such problem
My problem is that i disable favorites by adding parameter ALLOW_TCODE_START in SSM_CUST table
and it disble all the user to add tcode in favorites but i want user specific that i (administrator) am able to add tcode
in favorites but my client(subuser) not able to add tcode in favorites in sap easy acess .is it possible
please help.......................THANKS FOR REPLAY SIR,
but i know all the configuration of USERS_SSM table
where follwing configuration to hide for particular user is given:-
1 user menu
2 sap menu
3 web menu
4 compny menu
but i want to disable favorites for specific user which i think is only possible by table SSM_CUST with parameter
allow_tcode_start but it disable favorites of me (admin) as well as my client but i want i am able
to add tcode in favorites but my client not able to add tcode in favorites
please help............... -
Require user specific F4 functionality for a field in a program output
Dear all,
My requirement is i am using a field for ex: bukrs, name1 for an output. when iam using this two field in a program, if that program executes, i need F4 functionality for user specific. f4 functionality should show depends upon the name1.
In a template i have these two variables, when i give name1 as 'ABCD' and press f4 for the bukrs it should display only bukrs which are mapped to ABCD. Lets assume one table is there for name1 mapper to bukrs.
How it is possible. if so please let me know.
Regards
Arani BhaskarHello Arani,
I think solution to your problem lies in using MATCHCODE addition to parameters and select-options as well.
(This is from SAP F1-Help)
... MATCHCODE OBJECT search_help
*Effect*
This addition links the input field of the parameter to a search help search_help from the ABAP Dictionary. The name of the search help must be entered directly. For the input field of the parameter on the selection screen, the input help key is displayed. When the input help (F4) is requested, the user is displayed the hit list from the search help. When an entry is selected, the respective value is placed into the input field. If no search help for the specified name exists in the ABAP Dictionary, a message is displayed in the status line when the input help is requested.
The addition MATCHCODE OBJECT cannot be used together with the additions AS CHECKBOX or RADIOBUTTON.
*Note*
The predecessors of search helps in the ABAP Dictionary were socalled matchcode objects. This is why you have the name MATCHCODE OBJECT for this addition. Matchcode objects that have not yet been replaced by search helps continue to be supported by this addition.
*Example*
Linking the parameter p_carrid with a suitable search help. When you choose the input help on the selection screen, a list with the names of the airline carriers is displayed. If a name is selected, the corresponding abbreviation is placed in the input field.
PARAMETERS p_carrid TYPE s_carr_id
MATCHCODE OBJECT demo_f4_de.
Moreover, please read about using MATCHCODE, hope it helps you, Arani.
Thanks: Zahack -
KOB1 ALV greyed out checkbox "user specific"
Hi Experts,
following problem, in ta KOB1, during saving a layout the "user specific" check box is greyed out.
the outorization object s_alv_layo (act.23) & s_alv_layr are granted to the user profile.
No outorization problem in su53
the oss-notes: 1667238 1818614 are implemented correctly.
any suggestions are welcome
br
JuliusHi Julius,
Please check SAP note 331416 - CO line item reports: EXIT_SAPLKAEP_009. This will help to find out whether your system has specific coding activated. Point 3 in note is as follows:-
3. All users may change all layout/display variants in the standard setting.You should now change this so that only the user 'THE_BOSS' has the authorization to make changes.All other users should only be allowed to change user-defined variants/layouts.
Solution:parameter I_SAVE is responsible for the control of the variant/layout maintenance. Its characteristic values are:
a) ' ' = display variants cannot be saved
b) 'X' = standard save, user-specific saving is not possible
c) 'U' = only user-specific saving
d) 'A' = standard and user-specific saving
In the standard system, I_SAVE = 'A'. You have to set this to 'U' for all users except for 'THE_BOSS'.Also refer to Note 310293 regarding this problem.
if sy-uname ne 'THE_BOSS'.
i_save = 'U'.
endif.
Regards,
Anand Raichura -
User specific setting for SSM_CUST table
Dear experts,
i know it is not a right forum for post this thread but i am not able find to right forum for such problem
My problem is that i disable favorites by adding parameter ALLOW_TCODE_START in SSM_CUST table
and it disble all the user to add tcode in favorites but i want user specific that i (administrator) am able to add tcode
in favorites but my client(subuser) not able to add tcode in favorites in sap easy acess .is it possible
please help.......................Please anyone give some suggetion on it
i m in great problem
please help............ -
User Specific Display Variants
Hi
Were on ECC 6.0 and when I choose to create and save a display variant from and ALV screen the user-specific box is ticked and I can not un-tick it because its grayed out - no matter what we do we can not un-tick this checkbox. We need to create global display variants so that all user can use these display variants.
Is there a configuration setting that we can adjust ?? any suggestions to overcome this problem are welcome.
ThanksHi Eric,
I'm a bit busy now and I cannot give you a complete solution, but sure can give you some c(l)ue. Just see if you have some success. If you do not, then i wuill get back to you later.
Refer to the follwoing SAP Tables and see if you have some luck.
==========================================================
LTDX --> Generic storage of display variants
LTDXD --> Default display variants
LTDXS --> SAP Default Display Variants
LTDXT --> Display variant texts
==========================================================
The idea is to try and manipulate the table entries for various users.
Regards,
Anand Mandalika. -
Setting OMCQ User specific.
Hi All,
Transaction OMCQ is used to set the error messages in SAP standerd applications but I want to make it user specific, though in OSS Note 935755 SAP has suggested to work with this transaction by making it user specific , but steps are not given, Can any body suggest me how to make it user specific.
Regards,
Sifath...Hi
You have to create a version for the actual message by copying the same.
Example:
Copy the following message
<b>Verson Application area Mesaage
00 06 042</b>
as
<b>01 06 042 </b>
and against this message assign user specific message like error or warning.
Assign this version number to user parameter MSV in user settings.By defining different versions and assigning this number to users , we can configure user specific messages.
I think this will solve your problem.
Regards
Ramakrishna
Maybe you are looking for
-
Hi Gurus 1 )According to my understanding can I say All objects in a request will be locked if the request is not released. All objects in a request will be unlocked if the request is released. 2 )My question is what locks the objects. 3)Any other ca
-
Hi, Problematic: I want to access from one PC to an autonomous application installed on another PC through an Ethernet connection with a web browser. Trials: LabVIEW is installed on PC1 but isn't on PC2. When I try in local on PC1 it works. When I tr
-
Software update installer - Error 1720
Hi. Anyone else unable to install the Software Updater on XP Professional SP2? "Error 1720: There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contat your support personnel or pack
-
How to put ringtone on iPhone 4
HOw to download personal ringtone
-
Hi, How to uninstall Mcafee anti-virus from my machine because of machine bootup is taking too much of time for usage? so that i moved all mcafee related file to trash but while machine boot up mcafee showing and asking Authentication so any one give