Smartforms with itab problem

Hi
I must only have a header on first page
and after this header in the 1-st page must be have a table (with unknown size)
In second page must be yet only this long table without header.
And on the last page must be footer.
I done this but on the first page I have a table in 6cm of top page and on every page is it also but
in next pages must be in 1cm of top page.
How to do this?

Hi,
You mean to say that if the header is 4 cm from top, in next page the table starts leaving the 4 cm header sapce.
In this case you can over lap the table window over the header window ONLY IN NEXT PAGE.
Eg. Header display settings on 1st page
Header coordinates:
1 cm from top                 width 4 cm
table window coordinated:
4cm from top                  width 8 cm
On next page:
Header coordinates:
1 cm from top                 width 4 cm
table window coordinated:
1cm from top                  width 8 cm
this will definitely work
regards,
Gaurav

Similar Messages

  • Smartform with Cyrillic characters

    I have a smartform with Russian characters that works fine when using the font courcyr, but when using timecyr I get '#' in place of the cyrillic characters. I have no problem using the timecyr with sapscript, but the only way I can print cyrillic characters in a smartform is with courcyr and I want to use timecyr. Do smartforms use a different set of fonts than sapscript? Any ideas?
    Thanks
    Craig

    The language of the sapscript might be russian and smartform is not translated to russian.
    If you are using message control for printing, make sure the output issued in the language you are trying to print.
    Regards
    Sridhar

  • Printing Smartform with Table data from PrintProgram

    Hi,
      Can any one explain the steps involved in printing the Smartform with the data from the Print Program table. How to fit table in the Smartform i.e, while designing the Smartforms layout for the table.
    Thanks & Regards

    Hi,
       As  data is coming from the print program in the table. Do the following procedure
    1. In the form interface ---> Declare the internal table as same structure as in the print program. for ex: you r passing MARA table data then declare it as itab type table of mara.
    2. In the window you want to create the table, right click > create> table.
    3. Go to data tab give the internal table name and work area .
    4. Now go to General tab-->Details.
    5. Declare the line types.
    6. Right click on header/main area/footer -->create table line.
    7. Now give the line type which you want to use.
    8. In the displayed columns>right click> create text node.
    9. In the text node &mara-matnr&.
    Procedure to create line type:
    1. Double click on table
    2. Go to table tab --> details
    3. Give the table width (width you want to display on the screen should be less than or equal to the window width).
    4. Line type --> Divide this into no of column you want to have in header/item.
    Note: total length of all columns should be equal to the table width.
    5.save.
    Br,
    Laxmi

  • Smartforms print out problem

    hi all
    i am priniting a smartform with logo the problem is i a getting inverted logo where as verythn else id gd.
    can anyone suggest me what is going wromg
    regards
    navjot

    Hi
    Check the same printing in another printer
    because sometimes it will happen due to printer also.
    So check and confirm it
    and also check the resolution of the graphic technical settings and the output options in smartform
    see the steps correctly
    1)     In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
    2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
    3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
    4) Select any picture and set its Resolution in DPI
    5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and   position of the Logo
    6) Set any other parameters if required, save and activate.
    7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
    8) Use  TCode SE78 to upload new pictures and logos.
    look at Thread Dynamic Graph in smartforms
    Refer the links also -
    Re: Dinamic Graph in smartforms
    How to get file perperties in Unix server
    Reward points for useful Answers
    Regards
    Anji

  • Printing issue in smartform with output type

    Hi ,
    I am facing issue while I am taking print from zebra printer.
    I am trying to take a print from MB90 but its not coming but its giving status 'processed' and same from the spool, in spool its showing status complete but not giving any printout.
    if I m attaching  my smartform with another output type which already working for another label(smartform), then its giving print.
    So, what I want to know..
    Its can be a problem with output type config or from basis side.
    Please help.
    Thanks,
    Sandeep

    well i have seen setting are correct but having one issue it doesnt trigger automatically I do it manually from MB90 and rest of the things are correct becaoz i have seen while debug its going correct form from driver program, when i am runniing from MB90 manually .
    Thanks,
    Sandeep

  • Smartforms user specific problem

    Hi
          I have a developed a smartform with two page , when i am excetuing this smartform from my user-id next page is not coming but when I executing this same form with another user-id it  displying both the pages . can you please tell me where is the problem.
    Thanks & Regards
    Girdhari

    Hi,
    Please look at the Printer of both users. This problem may arise when different printers are allocated for different users.
    Look at the print-preview screen of both users.
    If Printers are different for both users, then contact to Basis person.
    Regards,
    Keyur.

  • My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

    My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

    Hi Venkata from NZ,
    If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how

    Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem: 
    Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
    When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
    If I know the song title I can select the songs tab and find the song that way,
    I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
    Thanks for your help

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Monitors with Gradient Problems?

    Hi All,
    Further to my recent post "monitor screen display terrible!"
    Finding a monitor without spending a lot with excellent picture quality is proving differcult! I have tried a Philips 22" monitor Model 220CW9FB and now a BENQ T900HD 18.5 WS monitor all not as sharp with good contrast as my 4 year old G5 iMac. Also has a gradient problem e.g. as you get up off your chair and continue to look down at the screen the white background of the screen turns light blue then darker and colored parts turn white!? Also looking at an angle to the side anything light blue turns a light brown!? Then as I'm viewing something as in Apple Discussions each box of replies alternate white then light blue and so on but looking at normal distant as you type each box are white. You have to lean back in your chair, twice the distance back to actual see the blue box then white box!?
    What's that all about? I have noticed this on the new 20" iMacs too but the three new 24" iMacs are great just like my Rev A G5 iMac of 4 years. Are these inferior screen problems anything to do with them being TN panels as I've just read about?
    I really don't know where to go from here as the screen quality is important. I'm use to the great screen quality of my old G5 iMac and don't want to go down in quality for the sake of moving from a Mac PowerPC to an Intel Core 2 Duo even though I need this for EyeTV hybrid and all the features of iLife '09 etc.
    I don't want to spend a huge amount for an Apple display as I might as well get the entry level 24" iMac. The main reason for not getting the new iMac is I don't like the glossy screen, although today I heard there is an option for a 24" matt screen... any truth in that? Then again will I be able to return the new Mac mini I've only had for 6 days for a 24" iMac?
    Other suggestions seen here is turning my G5 iMac into a stand-a-loan monitor or maybe a 20-year-old CRT 19" TV I have can be used as a monitor and if so what connections are needed? Any ideas on these options?
    So buying the new Mac mini has created a lot of unexpected problems. I thought as asked about before getting it was told any monitor would have the same picture quality as my old G5 iMac, but after the fact found out this is not the case.
    Thanks for the read & any ideas/thoughts much appreciated...

    AFAIK Hmmm Googled "As Far As I Know"... So far I've tried three monitors (all with gradient problem) so it looks like you are correct. I'll try a couple more today as if I need to return my Mac mini with Philips monitor need to do soon for a 24" new iMac even though the Mac mini is not at fault. I'll have to get use to the glossy screen. While writing this an item "iMac or MacBook display too glossy? Apply inexpensive non-glare LCD protective film" has appeared in MacDailyNews.
    http://macdailynews.com/index.php/weblog/comments/20561/
    Thanks for the idea using my G5 as a monitor but maybe quite an involved process?
    It's a shame in all my research before buying a monitor no salesperson mentioned TN display panels. Mind you since the problem no salesperson has said they know about TN display panels or better monitors, just saying any monitor will work with the new Mac mini. Very frustrating!

  • I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    Hello AKCamus
    To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I bougt a new  Macbook pro in 02/26/2013, in  11/25/ 2013, my trackpad become bulging, they exchange the trackpad, but not the bulging battery.  I went there yesterday, with different problem, and they said one screw  came off from the  truckpad again!

    I bought a new  Macbook pro in 02/26/2013 from Apple Canadian Ices -003.  Than I could not use it, because  my cursor uncontrollably  was jumping around the screen, I was  resumed my trackpad become bulging, Than on11/25/ 2013 they changed my trackpad for free, because was manufactoring defect,  but not the bulging battery.  They said that is do not needed.  Since that my cursor is quiet often quivering, I think my Macbook has serious  manufacturing defect. But they said no, during a year period I went to  the genius bar at least 15 times, with this and similar problems.   I went there yesterday, with different problems, and they said one of the screws  came off from my   truck pad, therefore they need to fix it and change it.  I said: -  What,  how, what  is the real problem?  A screw does not comes off just like that?  They will change my trackpad again, but not the battery. They said  has to rebuild the operation system, I'm  saving all of my data right now! I would like to exchange the battery too, or maybe get a new Macbook. My Macbook is 2010 China model. How long I would have this trackpad  problem? What are you suggesting?

    If it's a 2010 as you say towards the end of your post, it's out of warranty. The battery isn't covered in that case. Why don't you just buy a new battery if that's your concern? If it's a 2013 as you say up at the top, it shouldn't have a bulging battery. How do you know it does? If it really does, ask for the store manager and explain the problem.

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

    I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • I was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?

    i was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

Maybe you are looking for