Smartshapes not showing in html 5 output

I generated a html5 output from captivate 6. Some of the smart shapes are not showing in the output. They are however visible in the swf output. Why could this be?
In addition the effects added to the smart shapes do not occur.

There were quite a lot of issues with shapes in HTML output in CP6. Sorry, but doubt a little bit that you'll find a workaround. Cannot you use images instead of shapes?

Similar Messages

Image is not showed in Apps Output

Hi,
In Apps output image is not showed, but in report builder output images are showed.
I imported image from my local system. Is there any path in Apps server to keep images?
Thanks in advance.
Regards,
Kalyan

Hi,
Are you working ona Report?. If so please check the concurrent program definition, it should be PDF or Postscript.
Thanks,
Robert

Image not displayed in html output used webservice to store in a location

hi
we have used webservices to store the pdf and html outputs but the problem is when we are seeing the preview in the bi publisher we can see the image in pdf and html but when we run through webservices and see the output files that are stored in some location image in the html output is not displayed but in the pdf we can see the image.
i have used the direct insertion image option in the header section. is the problem because i have used the direct insertion.
can you give the idea how to import logo from an external location so that we can check the if it is problem with direct insertion or problem with the webservice as we are storing the output files outside the catlog but it may not be wrong because in pdf we can see the image.
I am not having any idea how to solve thsi issue..
Sorry to bother you with these many questions
Thanks in Advance
Have a Nice day.

Please state which BI Publisher version you are using.
In case it is 10g then please always test the application with the latest patch first!.
BTW today there is been a new patch 11846804 released for 10.1.3.4.1 (March 2011).
regards
Jorge

Issue in Lion re Graphics Not Showing in html Email Signature

After I upgraded to Lion, I created an html signature with the graphics portion residing on Dropbox, and it worked without a hitch until about 10 days ago. Then a question mark in a blue square started appearing sporadically in place of the graphic. Now, in place of the graphic, I'm getting that question mark in a blue square 100% of the time in place of the graphic on Dropbox. The .webarchive file in my -/Library . . . mail/signatures folder that no longer reveals the graphic in my emails, however, works fine when opened up in Safari. I've tried rewriting the code, but it's of no avail. The files open up beautifully in Safari with the graphic, but in the signature box in Preferences and in the emails themselves, it's that blue box that keeps showing up. Does anyone have any idea why I'm not able to access my graphic from mac mail and how I can fix the problem?
Thank you very much in advance for your assistance.

As of two days ago, I am having basically the same problem as described:
imap account on my University, it always synced just fine with my iphone. Two days ago it stopped pulling new messages from the server, and moreover, it also does not show the recent ones it showed already, but only shows me approx. 100 really old messages (6 month old).
Whenever I sync, it pretends to do it (sync date gets updates), but it does not fetch the messages.
On my desktop and on my ipad2 (EXACT SAME SETTINGS), everything is ok, messages are pulled from the server (just as it was ok on my iphone two days ago, and I did not change anything).
When I go to the desktop, and move a new message (one this is not showin up on my iphone) to a subfolder of inbox or to the trash folder, then I suddenly can see this message also in the subfolder or in the trash on my iphone.
I have deleted the account and set it up anew, same result: the same 6 month old messages get uploaded, and that's it. I can delete also these old messages, and then they are gone, but also this does not pull up any additional messages.
Any ideas?
Oliver

Playing movie on tv; playing but not showing up; what output, DVD?

1st time trying to play movie on tv; playing but not showing up; do I need to change output? Only DVD & DVR shown. Thx

You need to provide more information. How are you connecting your iPad to the TV. Are you using an Apple TV 2, a component AV cable, a composite AV cable or the digital AV cable?

Applet not showing in HTML!

Hi all,
For some reason my generated HTML page will not show the applet it is meant to load.
The same HTML file loads simply in the appletViwer though and also in Net Beans!
Any ideas what I can do?
Heres my HTML code, is there something wrong with it?
<html><head><TITLE>Applet HTML Page</TITLE></head><body><h1>crossword v1.1</h1><H3><HR WIDTH="100%">Applet HTML Page<HR WIDTH="100%"></H3>
<p>
<applet code= "crossword4.class" width=500 height=550>
<param name = "one" value = "Erroneous">
<param name = "two" value = "Sightseeing">
<param name = "three" value = "Ambivalence">
<param name = "four" value = "Laborious">
<param name = "five" value = "Secateurs">
<param name = "six" value = "Wonderful">
<param name = "seven" value = "Elf">
<param name = "eight" value = "Inflect">
<param name = "nine" value = "Reeks">
<param name = "ten" value = "Note">
<param name = "eleven" value = "Encum">
<param name = "twelve" value = "Ocean">
<param name = "thirteen" value = " ">
<param name = "fourteen" value = " ">
<param name = "fifteen" value = " ">
<param name = "sixteen" value = " ">
<param name = "seventeen" value = " ">
<param name = "eighteen" value = " ">
<param name = "nineteen" value = " ">
<param name = "twenty" value = " ">
<param name = "twentyone" value = " ">
<param name = "twentytwo" value = " ">
<param name = "twentythree" value = "Ectopic">
<param name = "twentyfour" value = " ">
<param name = "twentyfive" value = " ">
<param name = "twentysix" value = " ">
<param name = "twentyseven" value = "Containing error (9)">
<param name = "twentyeight" value = "Needing or showing much effort (9)">
<param name = "twentynine" value = "Change the pitch of a voice in speaking (7)">
<param name = "thirty" value = "_____ber, to be a burden to (5)">
<param name = "thirtyone" value = " ">
<param name = "thirtytwo" value = " ">
<param name = "thirtythree" value = " ">
<param name = "thirtyfour" value = " ">
<param name = "thirtyfive" value = " ">
<param name = "thirtysix" value = " ">
<param name = "thirtyseven" value = " ">
<param name = "thirtyeight" value = "Away from its normal position (7)">
<param name = "thirtynine" value = "Visiting places of interest (11)">
<param name = "fourty" value = "Having conflicted attitudes or feelings toward something (11)">
<param name = "fourtyone" value = "Clippers for pruning plants (9)">
<param name = "fourtytwo" value = "Extremely good or remarkable (9)">
<param name = "fourtythree" value = "Tiny being in the form of a human, usually full of mischief (3)">
<param name = "fourtyfour" value = "Smells strongly (5)">
<param name = "fourtyfive" value = "Brief written record of something (4)">
<param name = "fourtysix" value = "Large expanse of sea (5)">
<param name = "fourtyseven" value = " ">
<param name = "fourtyeight" value = " ">
<param name = "fourtynine" value = " ">
<param name = "fifty" value = " ">
<param name = "fiftyone" value = " ">
<param name = "fiftytwo" value = " ">
</applet></p><HR WIDTH="100%">The source.</body></html>

I think it crashes because one of your parameters is wrong.
Without the applet and or a full trace I don't know.
To turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
if you cannot start the java console check here:
C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
I think for linux this is somewhere in youruserdir/java (hidden directory)
add or change the following line:
javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
for 1.5:
deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
I think for linux this is somewhere in youruserdir/java (hidden directory)

Metadata Not Showing on HTML Pages

Hi
I have notice that all the metadata PAGE DESCRIPTIONS are absent form all the sites lately. What happened to them? Most of my customers have used the SEO PAGE TITLE and PAGE DESCRIPTIONS for pages, blog post, and products, but there are not being employment and it seems to hurt there rankings at search engines. Any thoughts?
Thanks in advance, Teejay

CMYK color space?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joe Makowiec" <[email protected]> wrote in
message
news:[email protected]..
> On 18 Aug 2006 in macromedia.dreamweaver, bob.garrett
wrote:
>
>> I have a number of jpgs which have been supplied by
a number of
>> companies which will not show on a web page. In
Dreamweaver you do
>> not get a preview and when the page goes live you
get the old box
>> with a red x as if the file is not there.
>> But if I open any of the files in Photoshop or
Photoeditor etc and
>> simply resave then it all works. It is as if the jpg
format is not
>> recognised by web browsers and Dreamweaver but is
recognised by
>> Photo editors and then if resaved by the Photo
editor is then back
>> in an understandable format by Browsers.
>> Any ideas?
>
> There are a number of possibilities:
> - They weren't uploaded
> - They were uploaded to the wrong directory
> - They are on a case-sensitive server, and there is a
case mismatch
> between the link to the file and the actual filename
> - You are running blocking software, and something about
the file
> (filename, directory name, image dimensions) trips the
blocking software
>
> If you post a link to the page, somebody may be able to
offer you more
> insight.
>
> --
> Joe Makowiec
>
http://makowiec.net/
> Email:
http://makowiec.net/email.php

Image not displaying in HTML output

Hello! We have been using Report Builder 10.1.2.0.2 to generate PDF reports which contain a logo. However, when the same report is changed to DESFORMAT=HTML or HTMLCSS, we get a red "x" for the image. I'm not sure if this is issue can be resolved within the Oracle RDF file itself, or whether it is because of our architecture. We are executing the reports from Oracle Application Express, which utilizes HTTPS protocol and is hosted by Oracle HTTP Server on a server located in the DMZ of our corporate network. The Reports Services server is on a separate server, located within our corporate network. The Oracle Reports are executed through the browser using HTTP protocol. Could this be an SSL issue or a reverse-proxy issue on OHS? It seems that the image cannot be displayed in the browser because the path to the image is not recognized or valid. The image was embedded in the RDF file via Insert...Image, not File Link. This issue is not exhibited in our DEV environment, where both OHS and Reports Server are within the network. Any ideas would be appreciated.

Hello,
Right click on the red "x" and select "properties" to check the URL used to "download" the image.
The reports servlet will use information defined in the HTTP server conf file (httpd.conf) to build this URL
Parameters are :
ServerName
Port
UseCanonicalName
You can fnd details in the "My Oracle Support" document :
How the Reports Servlet Builds the URLs Inserted in the HTML/HTMLCSS output (Doc ID 276306.1)
Regards

GlassFish Tools - Eclipse console does not show server log output

Hi,
I just installed the latest Glassfish Tools (6.2.1.201308190137) on Eclipse Kepler and Glassfish Server 3.1.2. But when I start the server and open the console ('view log file' button) there is no output displayed (also not during deployment). When I open the server.log file in a text editor I can clearly see the log output. Re-starting Eclipse, re-opening the console view didn't help. I have this bug both on Windows 8 and OSX 10.8.4.
Is there something obvious that I am missing? In my previous pre-kepler Eclipse installation this works like a charm (using the same glassfish server). Also the path to the log file displayed on the top of the console view is correct.
This might be related to the following thread:
GlassFish > View Log File opens in editor instead of console
Will have to use my old eclipse installation until this is resolved. Any help is appreciated.
-- Mike

Apparently, the GlassFish Tools for eclipse is expecting the log messages in 'ODLLogFormatter' format only, and will refuse to show any logs messages that don't adhere to this format.
I've tried configuring my logback messages to match this format, and that works until an exception is thrown and a log message is entered somewhere using the 'UniformLogFormatter' format, which then causes the server.log parser to refuse to show any more messages.
This is a bug, but I'm unsure where to report bugs now since the move to OEPE. (Was https://java.net/jira/browse/GLASSFISHPLUGINS)

Line objects not showing in pdf output in xmlp 5.6.1

Hello,
Is there a bug or just a version issue when trying to produce pdf output using xmlp 5.6.1 Enterprise Edition from a template built in xmlp 5.6.2 stand alone? Different versions of pdf too. The xmlp 5.6.1 EE uses Adobe 7.0.7 and I use 7.0.0 for my dpf output. The issue is that the template built using 5.6.2 has line objects in the rtf file. When this template is registered in xmlp 5.6.1 EE and the report is generated the lines don't show up in the pdf.
Any one?
Ryan

I opened a TAR and here is the answer. My template definition was wrong because I directly used my data template xml file to define my template using template builder.
Here are all the steps to use XML data template under apps.
To use data templates, do the following:
1- Create the data template similar to the following structure
2- Login to responsibility "XML PUBLISHER ADMINISTRATOR" -> Data Definition
2.1 upload the data template (that is made in step1)
2.2 Insert a new code that is not find the concurrent request short name.
3- Login to system administrator -> concurrent -> program -> define (define a new concurrent request as following)
3.1 use execute XDODTEXE (it takes the data definition in step 2 and shall execute the query to obtain XML output)
3.2 Output format = XML
3.3 request short name as that defined in step (2.2)
4- Add the request to a request group
5- The the concurrent request and get the created XML output
6- Use the created XML Output in (step 5) to create your template layout using Template builder vers
ion 5.5
7- After creating the template go to responsibility "XML PUBLISHER ADMINISTRATOR" -> Templates
7.1 define a new template
7.2 use the same data definition that you created at (step 2)
7.3 Use the same code as in step (2.2)
After all the above steps you shall get the output as you wish. The main link between Data template and the concurrent request that execute the data template to generate the XML output is the request short name and the data template code.
Hint:
request short name = data template code.

Oracle Reports 6i - image do not show on html

Hi,
I am using Oracle Reports 6i, on Windows 2000.
I am running the reports from a Java Web application using RWServlet. The reports are just fine if I use PDF as DESFORMAT, but the images are not shown if the DESFORMAT is html.
The architecture is with the application running on a different server than the Reports Server and the Oracle 8i database, which reside on the same machine.
Any idea, why?
Thanks,
Paul

Whew...lot's of questions...let's see if I can help (at least a little)...
1. Quite possibly, the user is/was pulling the image from the database? I do this in my environment, so it might be worth a look.
2. You should be able to print in any format from the web. You may need to adjust your destype/desname/desname parameters.
3. Only thing I can think of here is that maybe the original report was not written using a standard web-friendly font?
4. There's a couple of ways you can get data into an excel file:
A. Use DDE and poke the data right into it (messy when you need to print the regular Oracle report too).
B. Add an option to print to file and set the desformat to DELIMITEDDATA. Be sure to go through the data model and set Exclude from XML Output to 'Yes' for fields you don't need. Also, be aware that this may not come out in the same order as they do on the printed report. You can read about this on Metalink.
Hopefully that helps you a little bit. :)
Chad

Console not showing trace statement output

Hello,
I have set up Flash Builder 4.6 for the first time for an ActionScript project. All good so far except that the console window doesn't show the output from my simple trace statement for my first little Hello World tester? There wasn't a console window on the workspace so I added one but on Run it says
No consoles to display at this time.
What do I need to do?
Any help much appreciated...
Steve

I don't see any attempt to assign text to any textfields in your code. What code are you using that is not working? Where would you be trying to assign to these textfields in your code? You need to create two textfields and give them instance names. Then, in your code, you assign the x and y values to those textfeilds...
tFieldX.text = String(mCoordPlane.mAlignment.x);
tFieldY.text = String(mCoordPlane.mAlignment.y);
I also don't see any code relative to checking the position of the mCoordPlane.mAlignment to show a message. After that object changes position you should have a conditional to test if its x,y properties are 0,0, and then assign to a textfield for that message or make a moviewclip appear that has that message, or whatever your intention is for displaying a message.
if(mCoordPlane.mAlignment.x == 0 && mCoordPlane.mAlignment.y == 0){
     messageField.text = "aligned";
You may end up having issues with accuracy regarding geting a zero value since you are operating with decimal value changes... meaning you may not get exactly 0,0 values.
Also, in the code you showed there is unnecessary repetition of these lines...
        trace(mCoordPlane.mAlignment.x);
        trace(mCoordPlane.mAlignment.y);
If each conditional includes it, then you only need to have it once at the end after the conditionals

Color corection not showing up in output

I am a bit of a newbie on this one but I am adding a bit of contrast and reducing brightness.
Show up great in Premiere, just like I like it but after output, it looks jus tlike the original. What am i doing wrong. The original was shot at HD on a Canaon 5D Mark II and output set to H.264 HDTV 720 23.967 High Quality and MP4
many thanks,
Houston

I like VLC and MediaPlayer Classic HC. Remember, none of these players are color managed, like Photoshop, Illustrator, or InDesign.
Some also recommend GOM, but I have not used it.
Good luck,
Hunt

Navigation pane not showing in merged output on server (IE9)

RH10 | WebHelp
We've moved our WebHelp outputs from an externally maintained server to an in-house server, but the left-hand navigation pane isn't displaying in our merged Help system. In our user guide (which isn't merged) the pane displays fine, but in our release notes (which is a merged system) it doesn't want to show itself. The main navigation pane and topic pane are fine, it's just the left-hand navigation pane that's blank.
I'm running IE9, but the weird thing is that it displays correctly in Firefox. It also works when run locally.
Both Help systems worked absolutely fine on the previous server, so I'm wondering if there's a conflict with something else that's running on the new server (e.g. our website's CMS, etc.) or whether it's a permissions thing?
My issue seems similar to other posts on here, but I'm using IE9 not IE11.
I'd be grateful for any ideas.
Thanks
Jonathan

See if Item 6 at http://www.grainge.org/pages/snippets/snippets.htm#webhelp helps.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Key figure, number of decimal places are not showing in report output

Dear experts,
At cube level PO qty value is getting 0.010 where as in bex report output of PO qty showing as 0. I have chosen decimal places as 0.000 in key figure additional properties tab. In query designer also I have chosen no of decimal places as 0.000 in display propertiesu2026please help me out. How can I get 0.010 value in report o/p.
Thanks in advance.
Srivalli.

Hi,
Try to run the query in RSRT. CHeck if you are getting the same output. Also make sure that in the reports all the filters are same as you have applied in the info -cube to see the data.
- Jaimin

Smartshapes not showing in html 5 output

Similar Messages

Maybe you are looking for