Smartsound Quicktracks Plugin Problem

After making the mistake of upgrading to iTunes 5, I now get a windows installer message looking for 'Smartsound Quicktracks Plugin.msi" everytime I boot up the PC. It's looking for this plugin. I was using the previous version of iTunes. I've tried uninstalling Quicktime and re-installing with the same problem. Will reverting back to earlier iTunes wipe out my purchased music and should I attempt to do this? It's a pain to keep clicking on cancel everytime I boot up.

Trevor, welcome to these discussions.
The "Smartsound Quicktracks" plug-in has nothing at all to do with Apple's QuickTime for Windows software.
You must have downloaded it and then (maybe) uninstalled it. And it didn't uninstall completely or properly.
It's not an error message from any of your installed Apple software.

Similar Messages

Smartsound Quicktracks for CS5

The third party page for CS5 talks about a new quicktracks plugin for CS5. However the Smartsound currently says that CS5 is not supported. Is this just that it is still in development and will come along a lot later (as it did for CS4) or is it available somewhere now?

SmartSound has been working closely with Adobe on the CS5 QuickTracks plug-in. CS4 changed things enough, that the QT plug-in had to be reworked for it, from previous versions of PrPro. Adobe was late in getting the SDK out to 3rd party suppliers, so it was late in the lifespan of CS4, that the QT plug-in became available. Adobe and SmartSound did begin working towards CS5 earlier, but the x64 aspect meant a total re-write, plus changes in Audio-handling in CS5. That has slowed things, but my sources tell me that work is progressing. There are also plans for a Sonicfire Pro plug-in for PrPro, like the one for FCP. Do not know the exact status of either plug-in's development.
In the meantime, Sonicfire Pro 5 Express Tracks version is available for free, with the purchase of any of the multi-layer discs, like the Strata Series. Note that it is a stand-alone app, but works great. One can purchase the Scoring Edition also, and that adds a great deal of power with those multi-layer discs. This is the version that is in development as a PrPro plug-in. Here's hoping that SmartSound is successful in that development, just as with the QuickTracks plug-in for CS5 and x64 OS's.
If I get any word on intended release dates, I will update this thread.
Good luck,
Hunt

PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6

PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6 & a mac osx 10.7.5 I have downloaded the pluginhttps://sourceforge.net/projects/panotools/ I drag it to the applications folder (applications/photoshop/plugins) and it shows up there, but it does not show up when I reopen photoshop, can anyone tell me if this is a valid plugin or what I am doing wrong?

Thank you for the link, I don't see where the licensing is listed at all, I also don't see where it says it is for existing CS2 users only & the line install a special version that does not require activation -
doesn't scream it'd be a problem to load it especially since I already own a later version that I can't use the plugin on - …I don't find the site all that informative. I appreciate all the answers & responses to my use of CS2 but I'd really just like to receive an answer to the original question of if the plugin works with it or not…if anyone has that answer I'd appreciate it.
Is there a place I can purchase it? I will gladly do so if I can get the plugin to work-that is my goal.

I'm having "blocked plugin" problems in mail after 10.7.5 update. Anyone else having this problem? Fixes? Thanks!

I'm having "blocked plugin" problems in mail after 10.7.5 update. Anyone else having this problem? Fixes?
Thanks!

I'm having "blocked plugin" problems in mail after 10.7.5 update. Anyone else having this problem? Fixes?
Thanks!

Premiere Elements 9 on a PC Smartsounds-Quicktracks

Seems I have lost my quicktracks that came with this program don't ask me how I don't know! I had them on itunes also and now I can't find any to use to add in the time line help? How do I reinstall smartsound-quicktrack again? Help I am lost speak English please when leaving directions.

Here are the standard SDS files on my system:
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\Airy Whoosh [2058].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Bell Accent 1.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Bell Accent 2.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Bells Wipe.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Blues To Go 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Boulevard Funk 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Cym Accent.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Cym Crash Long.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Cym Crash Med.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Cym Crash Small.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Cym Crash Splash.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Cymbal Swells\Cymbal Swell 1 [0961].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Cymbal Swells\Cymbal Swell 2 [1355].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Cymbal Swells\Cymbal Swell 3 [0654].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Cymbal Swells\Cymbal Swell 4 [0728].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Cymbal Swells\Cymbal Swell 5 [1252].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Deep Hit 1.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Deep Hit 2.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\Fireball Med [0515].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\Fireball Quick [0222].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Glass Break.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Gong.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Harp Ascending.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Harp Descending.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Heavy Hit 1.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Heavy Hit 2.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Heavy Hit 3.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Heavy Hit 4.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Heavy Hit 5.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\High Whoosh 1 [0301].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\High Whoosh 2 [1045].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\Highlight Whoosh [1068].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Hit-Swell.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Island Party 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Laser Hit.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\Low Whoosh [0592].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\Med Whoosh [0916].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Metal Hit 1.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Metal Hit 2.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Metal Hit 3.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Impacts\Metal Hit 4.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Movie Logos 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Mozart Night 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Multiple Drum.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\New Vistas 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\Pad Whoosh [1305].sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Piano Sonata 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Power Drive 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Record Scratch.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Rim Shot [0377].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Wooshes\Slow Whoosh [1487].sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Subterfuge 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Swell-Hit Heavy [1572].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Swell-Hit Long [0837].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Swell-Hit Low [1428].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Heavy Hits\Swell-Hit Quick [0753].sds
C:\ProgramData\SmartSound Software Inc\Sound Files Hits\Highlights & FX\Sync Pop.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Synergy 22k.sds
C:\ProgramData\SmartSound Software Inc\Sound Files\Underwater 22k.sds
Cheers,
Neale
Insanity is hereditary, you get it from your children

Installing SmartSound QuickTracks Updates (only) Kill WAV Files

I do not know how any of this might impact PrE users, but in the PrPro forum, one user encountered the complete loss of WAV playback in PrPro. He traced the issue to having installed JUST the updates for SmartSound's QuickTracks plug-in for Premiere, and NOT the full plug-in, plus updates. He catalogs his efforts to fix the WAV issues in this THREAD.
I'm posting this as a H/U, just in case someone has installed JUST the SmartSound QuickTracks updates, without the full plug-in and they loose the ability to play back WAV files.
Hope that this helps someone in the future.
Hunt
Remember - this is directly related to PrPro, but might also play a role with PrE, especially earlier versions of the program, before QuickTracks for Premiere were added as part of the installation.

Addendum: later versions of Premiere Elements now have the SmartSound Sonicfire Pro Express Tracks version (not the Scoring Edition) included, rather than the older QuickTracks module. This allows one to use the newer SmartSound Multi-Track discs, where the older QuickTracks module will only work with some of the older Multi-Track discs. The version of SmartSound Sonicfire Pro Express Tracks included is limited, vs the Scoring Edition (available for purchase), but allows for a lot of editing of SmartSound material. The installation is separate from the installation of the Premiere Elements installation, and involves a download of the Sonicfire Pro Express Tracks installer. It is also necessary to then apply the update to the Sonicfire Pro Express Tracks program.
I feel, however, that the Sonicfire Pro Scoring Edition, when used with the Multi-Track discs, is so very useful, that I recommend anyone, who is serious about creating custom soundtracks for their Videos, look closely at it, and also that they see the SmartSound tutorials (on the SmartSound Web site), to discover the power that it provides - it is like having a million variations for each Multi-Track song.
Hunt

InDesign CS5, can't open file due to plugins problem

Hi folks!
I'm on Max OSX 10.5.8 and i am currently using a trial version of CS5 (Design Premium) while work sorts out the cash for the upgrade.
I work inhouse, and I needed to send an artwork file to an external design agency. I saved the file in CS5. The agency have CS5. When they open it, they get an error message to say they don't have the plugins needed to open it. We've never had any plugins, I'm not aware of any that would come with the trial that don't come with the bought version, so i don't know what to do.
Is there a way of saving a file without saving these "plugins" along with it? Or is there something else i can do?
Any help much appreciated

Well well guys, your experience in such matters prevails, after me emailing the agency mentioning again that it is a CS5 file and asking for a screenshot of the problem they came back and said they had figured it out themselves, turns out they are in the process of swapping all the team over to CS5 and the particular member that tried to open this file, was, yes, you guessed it, using CS4. Doh!
Many many thanks for your help!

Skillbuilders modal page plugin problems in Apex 4.1

Hi,
I have applied the Skillbuilders modal page plugin in my application. Everything works fine except that when I close the popup window - my parent window is not getting refreshed.
I have put the dynamic action - Auto Close modal and action as - Refresh report on parent page.
Settings:
Event : Auto Close [Skill Builders Modal Page]
Selection Type : DOM Object
DOM Object: document
No condition
Any help much appreciated.
Thanks,
Jas

Dear Dan,
I have the same problem, the main report is not refreshing after adding or editing values and the success message is not showing after the DA taking place and closing the modal.
another problem i am facing with oracle cloud which is when is when the modal loads, it gives me the following error :
Sample Database Application
[email protected]
An unexpected internal application error has occurred. Please get in contact with your system administrator and provide reference# for further investigation.
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.SESSION_STATE.SSP_CHECKSUM_MISSING
error_backtrace:
----- PL/SQL Call Stack -----
object line object
handle number name
0x32c6b06c8 548 package body APEX_040200.WWV_FLOW_ERROR
0x32c6b06c8 599 package body APEX_040200.WWV_FLOW_ERROR
0x32c6b06c8 903 package body APEX_040200.WWV_FLOW_ERROR
0x32ca89608 5985 package body APEX_040200.WWV_FLOW
0x32df51ac8 249 procedure APEX_040200.F
0x29cd0a0d0 2 anonymous block
Set Screen Reader Mode On 4.2.1
and after googling , i saw your solution for the super lov having the same problem
problem located in customers page.
the credentials are:
http://apex.oracle.com/pls/apex/f?p=4000:1:9039832809236::NO:RP:FB_FLOW_ID,F4000_P1_FLOW,P0_FLOWPAGE,RECENT_PAGES:37403,37403,37403;|,
workspace: ahk
username : dan
password : dan
Best Regards:
Yousef Alraway
Edited by: user12279113 on Mar 12, 2013 3:25 PM

Can anyone help with my Shutterfly export plugin problem?

My Shutterfly plugin for iPhoto says that I have the wrong password. I double-checked on the Shutterfly website and I have the correct password. This is very inconvenient because I can't upload my photos to make a book. Shutterfly said it's a problem with iPhoto. Any ideas?
I uninstalled and reinstalled the plugin but it didn't work.
It used to work just fine.
Thanks
Meg

It is not a problem with iPhoto since iPhoto has no support of any sort for Sutterfly - if you have a ShutterFly plug in it is not an Apple plug in - it is from ShutterFly or a third party - you need to contact the author for usupport on their product
LN

PDF plugin problem

Hello everyone,
a customer of us is having problems displaying PDF forms in Workspace ES. They are using IE7 with Reader 9.2. Reader is the standard application for PDF files, the "Display PDFs in browser" option has been set, but Workspace is still displaying the "You must install Adobe Reader to view this form" message. It also doesn't work if Reader is open in the background during the process.
What can be the reason for this? What can be checked to find out the reason why this problem is persisting? Maybe somebody knows what triggers this message box?
Thank you for any help,
Steffen.

Hi John,
as it turned out, there is a setting in IE where you can enable/disable ActiveX plugins. I do NOT refer to the overall ActiveX settings, but the "Manage AddOns" option in the settings dialog. There, each specific addon can be disabled/enabled separately. With some versions of Reader 9 there seemed to be a problem that (for unknown reasons) the Reader plugin was in a disabled state. Maybe you can check that?
Regards,
Steffen.

Adobe Flash Player Plugin Problem (Not listed)

Installed latest Adobe Flash Player, continually have to enable and disable if for YouTube I have tried uninstalling and re-installing and Firefox itself too, got all the updates. When going to full screen viewing I get a blank white screen..This I have put down to a conflict of the software...if it is can you tell me where I can get the fix/patch??

* * Hello, i have same problem, but listen me!
* * for look one video go to:
* * '''Tools >'''
* * '''Add-ons >'''
* * '''Plugins >'''
* * and find: '''ShockWave flash >'''
* * click: '''Disable >'''
* * and '''refresh video on youtube >'''
* * now '''Enable plugin >'''
* * and '''refresh again video on youtube >'''
* * now listen song/video
* * '''for every video you must do the same thing'''
* * Thank you! Bye!
* * The.Crossy

Playing icecast stream with flash-plugin problem

Hello,
i've got a problem playing an mp3 stream from a livecast
server with the flash-plugin (version 8,0,24) on IE (version
6.0.2900.2180.xpsp_sp2_gdr.050301-1519)
On my pc it plays fine, on another pc (with the same
versions) it doesn't play at all.
Though in will play fine in firefox on both pc's.
I can see in the icecast admin that there are listeners
connected, so it has to be flash that's not playing the stream it's
receiving.
code used:
var streamName = 'stream'
System.security.allowDomain("
http://www.insertserverurlhere.com");
myRadio = new String("
http://www.insertserverurlhere.com:8000/"+streamName);
mySound = new Sound();
mySound.loadSound(myRadio, true);
mySound.start();
Can anyone help me?
Greetings,
Ramon

Anyone??

.docx file received from a Windows user isn't displaying scientific writing in Word 2011 in OS X 10.6.8 - font or plugin problem?

I've tried searching everywhere and found similar issues, but nothing exactly this. I'm trying to format a document which was created in a Windows version of Word (unsure which year). However, the document has some scientific writing and minor equations (I assume), and they're just displaying as blank boxes, as if the font isn't installed. It says they should be in Cambria Math.
In Word 2011, Cambria and Calibri aren't displaying as installed fonts and they're listed as "heading fonts" separately in the drop-down, although they do show as all good in FontBook, and when I change to that font in the document, it does change to look like it's Cambria/Calibri. Highlighting and changing the font just changes it to code (ie: "PriBC", or "Cij", not a symbol) but it still says that it's "Cambria Math" after the change.
After some research I tried installing a trial of MathType in case that helped them display. When I highlight the symbols in Word, the MathType plugin pops up to deal with it, but I still can't get it to change to equations - either they disappear completely if I click to convert it to professional display, or they turn into codes like the one mentioned above under letter display. Admittedly, I don't have experience with this, so I'm wondering if there's something I should be requesting of the other person, some extra bundle of information to save in with the Word file?
There has also been one pop-up once that said that I didn't have Cambria installed on my system, which doesn't seem right, either.
On the plus side, my font collection is tidier than it's ever been. But on the downside, I still can't figure this out! Either, do you have suggestions how I can fix it from my end, or what details or steps I should specifically ask of the other person? (They're not particularly computer-literate, which is part of the problem.)
Thanks in advance.

Update: I upgraded to Mavericks today (10.9.1) and since then, problem solved! Don't know why that was the magic fix, but it was.

Opera plugin problem

The problem is following:
Opera 7.51 + Java Plugin 1.4.2
With this configuration javax.imageio.ImageIO.read(url) doesn't work from applet. The applet works nice inside Internet Explorer with the same Java Plugin, but not inside Opera.
This is a init() method of applet, the simplest of simplest. The applet is loaded, of course, from localhost. Any image formats have been tryed.
public void init() {
try {
Image mapimage = ImageIO.read(new URL("http://localhost/maps/reference.jpg"));
} catch (Exception e) {
e.printStackTrace(); //To change body of catch statement use File | Settings | File Templates.
And here is a dump of error:
sun.misc.ServiceConfigurationError: javax.imageio.spi.ImageOutputStreamSpi: : java.io.IOException: Connection failed.
     at sun.misc.Service.fail(Unknown Source)
     at sun.misc.Service.parse(Unknown Source)
     at sun.misc.Service.access$100(Unknown Source)
     at sun.misc.Service$LazyIterator.hasNext(Unknown Source)
     at javax.imageio.spi.IIORegistry.registerApplicationClasspathSpis(Unknown Source)
     at javax.imageio.spi.IIORegistry.<init>(Unknown Source)
     at javax.imageio.spi.IIORegistry.getDefaultInstance(Unknown Source)
     at javax.imageio.ImageIO.<clinit>(Unknown Source)
     at wf.opera.TestApplet.init(TestApplet.java:38)
     at com.opera.PluginPanel.run(PluginPanel.java:441)
     at java.lang.Thread.run(Unknown Source)
Any thoughts? If anybody has an Opera browser, please, try to test applet with underlying init() method trying to load any image from the same server. And in IE too. It's strange, isn't it?
Regards, Vitali.

I had the same problem a few minutes ago with the following setup:
Debian GNU/Linux Sarge
Java 1.5.0.2
Opera 8.0 Beta 1 (Debian Sarge package)
I have now upgraded to Opera 8.0 Beta 3 (Debian Sarge package) and now it works. It seems Opera has fixed the problem. Can anyone confirm this?

Plugin problem, LR 3.3

Recently (possibly since the installation of Windows 7 SP1) my JF tree publisher plugin has stopped working in lightroom 3.3. It loads, but is disabled because it says it "Could not load the post-processing filter from this plug-in". The plugins diagnostic file has the following:
**** Error 1
An error occurred while attempting to run one of the plug-in’s scripts.
AFTER_Link:6: attempt to call field '?' (a nil value)
**** Error 2
An error occurred while attempting to start the plugin.
AFTER_Link:6: attempt to call field '?' (a nil value)
**** Error 3
Could not load the post-processing filter from this plug-in.
AFTER_Link:6: attempt to call field '?' (a nil value)
**** Error 4
An error occurred while attempting to run one of the plug-in’s scripts.
r/tree-publisher-jfriedl.lrplugin/ESP.lua.tmp:1: attempt to call field '?' (a nil value)
**** Error 5
Could not load the post-processing filter from this plug-in.
r/tree-publisher-jfriedl.lrplugin/ESP.lua.tmp:1: attempt to call field '?' (a nil value)
Does anyone have any clue how to fix this. Is it specific to this plugin, or has anyone experienced similar problems with other plugins?

I'm getting very similar error messages for many of Jeffrey's plugins--did you ever resolve the issue?
the jr Flickr plugin was enabled and working fine for a while, then it stopped and I have been unable to get most of the jf plugins since, while most plugins from other sources (e.g., Photographer's toolbox), work. I'm in touch with Jeffrey about it but so far its not making sense to him. I'm running Windows 7, the latest LR. I"ve uninstalled and reinstalled LR 3.6, re-downloaded the plugins. Tried on a new LR catalog. Nothing fixes it.
David

Smartsound Quicktracks Plugin Problem

Similar Messages

Maybe you are looking for