SmartView 11.1.2.5.200 Available

All,  the newest SmartView client has many fixes and can be used to test if there are issues and it works with Essbase: 
11.1.1.3.500
11.1.1.4
11.1.2.x
To keep abreast of the patch levels for EPM bookmark the following:
Support Matrix - Product Compatibility Information (Doc ID 1507504.1)
Available Patch Sets and Patch Set Updates for Oracle Hyperion Essbase (Doc ID 1396084.1)

I don't think we now have the ability (post 11.1.2.3/2) to change datasource.xml file. Oracle came up with xml based shared connections. So you can define the connections host it and have user point to that xml file.
Smart View Shared Connection in an XML ~ Oracle - Hyperion Labs......
I'm not an HFM expert, maybe you can post that issue in Infra space or HFM space and see if that helps.
Regards
Celvin

Similar Messages

  • Scaling UI 200% available on Adobe Muse?

    Dear Muse Community.
    I'm a designer who've been loving to work with Muse for quite sometime.
    Recently, I've been working with Surface Pro 3 and love Photoshop's new "Scale UI 200% for high-desnsity display" feature.
    After I've applied the setting to the Photoshop, somehow it changed Muse as well where I thought it was very useful while working with touch panel.
    However, after installing new update for the Muse that feature has been disabled? or it's no longer scaled UI as it was.
    Previously, I've been working my projects on iMac 24" where I had some difficult time looking close in to tiny UI's.
    I believe this experimental feature should be available to all Adobe product if possible.
    If this feature is already available, please reply to this post.
    I will look forward for anyone's response. =)
    Best Regards,
    Re2

    I have the same problem. I'm trying to find the solution, but no success

  • SmartView connections using load balancing

    Is there a way to create a connection in SmartView to the Planning application that uses the load balancing functionality? When we log into the Planning web application we have a connection that provides load balancing between the 2 Planning servers. It appears that the only connection you can provide in SV for Planning is a direct connection to a web server like this: http(s)://<servername>:8300/HyperionPlanning/SmartView.

    I did a second look at my configuration and it actually looks like Workspace is the only Smartview connection that I have load balanced. For Planning, once connected to the Hyperion Provider Service URL the Planning applications show under the Common Provider Connections. The Planning connections point to the URL of the APS.....which is just like what you use. http://servername:8300/HyperionPlanning/SmartView
    Reading through the EPM High Availability Guide, it appears that it can be done for APS but it seems that might no longer support Planning:
    The following list specifies supported clustering methodologies for EPM System product and components (with sublists for components) and options for removing single points of failure from the architecture and maintaining consistent performance through load balancing.
    Oracle Essbase—Clustering with Oracle Hyperion Provider Services for high availability and load balancing
    Note: High availability for Essbase with Provider Services does not support write-back.
    See the Oracle Hyperion Enterprise Performance Management System Manual Deployment Guide.
    - Essbase Administration Services—None
    - Oracle Essbase Integration Services Server—None
    - Essbase services
    - Oracle Essbase Studio Server—None
    - Essbase services—Provider Services clustering for high availability and load-balancing (read-only)
    See Chapter 3, “Clustering EPM System Products with Proprietary Application Servers.”
    - Provider Services Web application—Java application server clustering for high availability and load-balancing
    See the Oracle Hyperion Enterprise Performance Management System Manual Deployment
    Guide.
    Clustering with Provider Services
    If Essbase is clustered with Provider Services and no third-party tool:
    - Smart View must be used rather than an Excel add-in.
    - Essbase has no write-back capability and should be used for reporting only; therefore, Oracle Hyperion Planning, Fusion Edition is not supported.
    - Nodes must be loaded and calculated individually.

  • Available stock information in detail

    I have the following suggestion to improve the logistic part of SAP BO 200X.
    When an article is on stock and there are purchase- or production orders, the salesorder only checks the TOTAL availability of the article.
    Example. On stock Qty 100, the ordered Qty 200.Available stock is Qty 300.
    A customer order is Qty 300 and will be accepted because the available stock is Qty 300, but if the customer wants to know when these goods will be delivered there is no direct answer possible, unless the production or delivery date is known.
    (To find this information you need to do some exploring in divers other programs!)
    This is nessessary for the planning of the delivery date of this sales order, but also for the customer to inform him correctly.
    Proposed solution:
    -Make a button in the (marketing document) order line to display the detailed purchase- or productionorder.
    -Change the current calculation of the available stock and give more detailed information.
    Detail information should be at least: DocEntry; Qty ;Production or Delivery date.
    Kind regards.

    Hi,
    We have a small add-on for this functionality. The basic overview of the add-on is:
    It has a button/context Menu on the Sales Order Entry screen where user can select the Item in the detail grid and click the button / context menu this should populate the screen display the list of Open PO’s with DocEntry / Open QTY along with delivery date.
    This displays the details but there could be Committed Value that would need to be considered say for example…
    In Stock is – 100
    Committed is – 200
    Ordered is - 300
    Actual is - 200
    So Committed value has consumed the 100 Qty’s from In Stock and 100 QTY’s from Ordered. Say we have 3 Purchase / Production order each of QTY 100, so one needs to inform user that he can only use 2 purchase orders while committing the customers. For this we have one more column to the list that will show the QTY committed against the sales order if the committed value is greater than In Stock Value.
    Doc Entry     |       Delivery Date  |   Open QTY      |      Committed
    1001             |          01/10/2007     |        100        |             100
    1002              |         01/15/2007     |        100        |             000
    1003               |        01/20/2007     |        100        |             000
    Is this something similar to what you are looking for if yes then contact us off the forum for detailed specification of the product and pricing.
    If not, we would appreciate your points to enhance this add-on further as we are planning to further extend it. We had done similar small product on the item Master data screen that displayed the details for the committed column. What we had done was, we placed a button on the screen and on clicking the button it would display the list of sales orders (Order Number / Customer/ Delivary date / Whse / QTY / Price) that had this item ordered from the selected warehouse (row in the Grid).
    Cheers,
    Nits
    Manager - SAP Business One
    G r e y t r i x
    It's time to think outside the box.
    Migration, Integration, Customization and Modification Solutions
    E-mail: [[email protected]|[email protected]]  
    Web: [www.greytrix.com|www.greytrix.com]

  • How to get the value in one JSP page to another?

    Hi,
    I have problems in passing the value around in JSP. I have two JSP pages as below:
    test1.jsp
    I try to get the vaule from my textbox by using:
    String strUser = request.getParameter ("strUserName");
    Then i print out by using: out.print(strUser); then i can get the value and put on my page (For example, i get ABC on my page).
    test2.jsp
    Next, i want to get the value from strUser (which mean that the one i already display on page in test1.jsp, ABC) to insert into my table by using INSERT INTO statement. Then i try by using
    String strUser1 = request.getParameter ("strUser");
    Is it possbile for me to do that? I cannot get anything to insert into my table. Then i tried out.print(strUser1); then i found that i get NULL value.
    Could you please give me some guidance?
    Thanks you very much for any advise you may give me.
    Kimsan

    Hi,
    Thank you very much for your help. It's working fine if i just get a one value to another page, however, i have problem while i pass the value in my loop to another page because i always get the last record. I try with the following code:
    logged_page.jsp
    <html>
    <head>
    <title>Welcome to the online Auction...</title></head>
    <body>
    <%@ page language ="java" import = "java.io.*, java.lang.*, java.sql.*" %>
    <% try
         String strUsername = request.getParameter("username");
         session.setAttribute("myUserName", strUsername);     
         String strPassword = request.getParameter("password");
         Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
         Connection myConn = DriverManager.getConnection("jdbc:odbc:Driver={MicroSoft Access Driver (*.mdb)};DBQ=C:/Auction/Auction.mdb");
         String strSQL = "SELECT [UserName], [Password] FROM tblUserDetails where [UserName] = ? and [Password] = ?";
         PreparedStatement statement = myConn.prepareStatement(strSQL);
         statement.setString(1, strUsername);
         statement.setString(2, strPassword);
         ResultSet myResult = statement.executeQuery();
         if(myResult.next())
         //out.println("Login Succesful! A record with the given user name and password exists");
         out.print("<center><h1>");
         out.print("Welcome  ");
         out.print(strUsername);
         out.print("</h1></center>");
         out.print("<center>");
         out.print("<BR><BR>");
         out.print("<font font face = Viner Hand ITC size= 5>Products on sales</font>");
         out.print("<BR><BR>");
         Statement myStatement = myConn.createStatement ();
         ResultSet myResult1 = myStatement.executeQuery("SELECT * FROM tblProduct");
         ResultSetMetaData myResultSet = myResult1.getMetaData();
         out.println("<font face=Tahoma>");
         out.print("<table border=1 CELLSPACING=0>");
         out.print("<TR>");
         out.print("<TD width = 200> Item Title");out.print("</TD>");
         out.print("<TD width = 200> Description");out.print("</TD>");
         out.print("<TD width = 200> Current bid");out.print("</TD>");
         out.print("<TD width = 200> Available Time");out.print("</TD>");
         out.print("<TD width = 200> Place Bid");out.print("</TD>");
         out.print("</TR>");
         out.print("</table>");
         while(myResult1.next())
              String strProName = myResult1.getString(1);
              session.setAttribute("myProName", strProName);          
              out.print("<table border=1 CELLSPACING=0>");
              out.print("<TR>");
              out.print("<TD width = 200>");
              out.println(strProName);
              out.print("</TD>");
              out.print("<TD width = 200>");
              out.println(myResult1.getString(3));
              out.print("</TD>");
              out.print("<TD width = 200>");
              out.println(myResult1.getString(2));
              out.print("</TD>");
              out.print("<TD width = 200>");
              out.println(myResult1.getString(4));
         out.print("</TD>");
         out.print("<TD>");
              out.print("<form action=bid_page.jsp method=post>");
              out.print("<input type=text name=place_bid>");
              out.print("<input type=submit name=okfunc value=Bid>");
              out.print("</TD>");
              out.print("</form>");
              out.print("</TR>");
              out.print("</table>");
              out.println("</font>");
              out.print("</center>");          
         else
              out.print("<center>");
              out.print("Sorry ");
              out.print("<font color = RED size = 5>");
              out.print(strUsername);
              out.print("</font>");
              out.print(" could not be found.");
              out.print("</center>");
         myResult.close();
         statement.close();
         myConn.close();
         catch(SQLException e)
         out.println(e);
    %>
    </body>
    </html>
    bid_page.jsp
    <HTML>
    <HEAD>
    <TITLE>Welcome to the online Auction...</TITLE>
    </HEAD>
    <BODY>
    <%@ page language ="java" import = "java.io.*" import = "java.lang.*" import = "java.sql.*" %>
    <% try
         String thisUserName = (String) session.getAttribute("myUserName");
         String thisProName = (String) session.getAttribute("myProName");
              Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
         Connection myConn = DriverManager.getConnection("jdbc:odbc:Driver={MicroSoft Access Driver (*.mdb)};DBQ=C:/Auction/Auction.mdb");
         PreparedStatement myStatement = myConn.prepareStatement("INSERT INTO tblHistory VALUES ('"+thisUserName+"', '"+thisProName+"', '"+request.getParameter("place_bid")+"')");
              myStatement.executeUpdate();
              myConn.commit();
              myStatement.close();
              myConn.close();
              catch(Exception e){}
    %>
    </BODY>
    </HTML>
    When i click on the BID button in the logged_page.jsp then i always get the last record and save into my table and that is not what i want to. i want to get the result on the same row as the BID button that just click and save to my table.
    Could you please advise?
    Thanks you very much for your time and any consideration you may give me.
    Best Regard,
    Kimsan

  • MEMORY_NO_MORE_PAGING and TSV_TNEW_PAGE_ALLOC_FAILED

    Hi All,
    We are facing these errors approx. daily (but not everyday):
    MEMORY_NO_MORE_PAGING
    TSV_TNEW_PAGE_ALLOC_FAILED
    Now, I searched the Forum but there is no acceptable answer for the current issue. Some person said that it could be possible if a user have entered any illegal range in program.
    How can i modify the parameter values? RZ11 shows all parameters but not in RZ10(where we can modify).
    Here is the current configuration:
    Roll, extended and heap memory EXTM
    ztta/roll_area        3000320    Byte Roll area per workprocess (total)
    ztta/roll_first       1024       Byte First amount of roll area used in a dialog WP
    ztta/short_area       3200000    Byte Short area per workprocess
    rdisp/ROLL_SHM        32768      8 kB Part of roll file in shared memory
    rdisp/PG_SHM          16384      8 kB Part of paging file in shared memory
    rdisp/PG_LOCAL        150        8 kB Paging buffer per workprocess
    em/initial_size_MB    14500      MB   Initial size of extended memory
    em/blocksize_KB       4096       kB   Size of one extended memory block
    em/address_space_MB   4096       MB   Address space reserved for ext. mem. (NT only)
    ztta/roll_extension   2000683008 Byte Max. extended mem. per session (external mode)
    abap/heap_area_dia    2000683008 Byte Max. heap memory for dialog workprocesses
    abap/heap_area_nondia 0          Byte Max. heap memory for non-dialog workprocesses
    abap/heap_area_total  6442450944 Byte Max. usable heap memory
    abap/heaplimit        40894464   Byte Workprocess restart limit of heap memory
    abap/use_paging       0               Paging for flat tables used (1) or not (0)
    I also read that some parameter values like Roll Area should not be changed like here: http://help.sap.com/saphelp_nw70/helpdata/en/02/96274f538111d1891b0000e8322f96/content.htm
    Furthermore, some suggestions were to modify the Heap Parameters, Roll etc...
    Here is our PRD SPEC:
    Processor: Intel Xeon X5450  3.00GHz
    RAM: 20 GB
    HDD: 140 GB Internal
    SAN: 700 GB RAID
    Please Advise,
    Regards.

    Hi Michael,
    Thank you for your information, here is the current dump (most recent one):
    Runtime Errors         MEMORY_NO_MORE_PAGING
    Date and Time          13.10.2010 14:32:19
    How to correct the error
         The amount of storage space (in bytes) filled at termination time was:
         Roll area...................... 16192
         Extended memory (EM)........... 305858320
         Assigned memory (HEAP)......... 0
         Short area..................... " "
         Paging area.................... 16384
         Maximum address space.......... " "
    And Current View EM (in ST02):
    SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB]  In Mem[KB] OnDisk[KB] SAPCurCach HitRatio
    Roll area           40.18     24,274     24,976     262,144          0   IDs           99.59
    Page area           10.94     28,678     34,400     131,072    131,072   Statement     97.00
    Extended memory     31.43  4,665,344  5,296,128  14,843,904          0                  0.00
    Heap memory                  139,015          0     139,015          0                  0.00
    Detailed Information:
    Roll memory     Dialog session   kB      2,930
                    Nondialog sess.  kB      2,930
                    Available        kB     60,416
                    in shared memory kB    262,144
                    on disk          kB          0
                    Used             kB     24,274
                    Maximum used     kB     24,976
    Paging memory   Session buffer   kB      1,200
                    Available        kB    262,144
                    in shared memory kB    131,072
                    on disk          kB    131,072
                    Used             kB     28,678
                    Maximum used     kB     34,400
    Extended memory Dialog session   kB  1,953,792
                    Nondialog sess.  kB  1,953,792
                    Available        kB 14,843,904
                    Used             kB  4,665,344
                    Maximum used     kB  5,296,128
    Heap memory     Dialog session   kB  1,953,792
                    Nondialog sess.  kB          0
                    Used             kB    139,015
                    Maximum used     kB    139,015
    Current Parameters Setting:
    Buffer Name                    Comment
    Profile Parameter     Value      Unit Comment
    Roll, extended and heap memory EXTM
    ztta/roll_area        3000320    Byte Roll area per workprocess (total)
    ztta/roll_first       1024       Byte First amount of roll area used in a dialog
    ztta/short_area       3200000    Byte Short area per workprocess
    rdisp/ROLL_SHM        32768      8 kB Part of roll file in shared memory
    rdisp/PG_SHM          16384      8 kB Part of paging file in shared memory
    rdisp/PG_LOCAL        150        8 kB Paging buffer per workprocess
    em/initial_size_MB    14500      MB   Initial size of extended memory
    em/blocksize_KB       4096       kB   Size of one extended memory block
    em/address_space_MB   4096       MB   Address space reserved for ext. mem. (NT on
    ztta/roll_extension   2000683008 Byte Max. extended mem. per session (external mo
    abap/heap_area_dia    2000683008 Byte Max. heap memory for dialog workprocesses
    abap/heap_area_nondia 0          Byte Max. heap memory for non-dialog workprocess
    abap/heap_area_total  6442450944 Byte Max. usable heap memory
    abap/heaplimit        40894464   Byte Workprocess restart limit of heap memory
    abap/use_paging       0               Paging for flat tables used (1) or not (0)
    Please guide me if it requires any further analysis.

  • TSV_TNEW_PAGE_ALLOC_FAILED dump Issue

    Hello All,
    We are facing this dump error when executed from SM35.
    It is a ECC 6 PRD system on Windows(64bit) & SQL server.
    What Happened:
    Information on where terminated
        Termination occurred in the ABAP program "SAPLSBDR" - in "BDC_OBJECT_SELECT".
        The main program was "SAPMSBDC_CC ".
        In the source code you have the termination point in line 59
        of the (Include) program "LSBDRU04".
    How to correct the error
        The amount of storage space (in bytes) filled at termination time was:
        Roll area...................... 4019392
        Extended memory (EM)........... 2002743520
        Assigned memory (HEAP)......... 2000021120
        Short area..................... " "
        Paging area.................... 32768
        Maximum address space.......... " "

    Hello Venkat,
    Please find the details as per the SAP Note,
    1.Memory consumption
    The amount of storage space (in bytes) filled at termination time was:
    Roll area...................... 4019392
    Extended memory (EM)........... 2002743520
    Assigned memory (HEAP)......... 2000021120
    Short area..................... " "
    Paging area.................... 57344
    Maximum address space.......... " "
    2.System Data
    System environment
        SAP-Release 700
        Application server... "SAP-PROD"
        Network address...... "172.23.0.112"
        Operating system..... "Windows NT"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "2x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "SAP-PROD"
    Database type..... "MSSQL"
    Database name..... "AEP"
    Database user ID.. "aep"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Nov 18 2008 22:53:36"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
    Patch level. 185
    Patch text.. " "
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
      NT 6.0"
    3.R/3 Storage Parameter
    a.SAP Memory
    Roll memory     Dialog session   kB     6,348
                             Nondialog sess.  kB     6,348
                              Available        kB   262,144
                              in shared memory kB   262,144
                              on disk          kB         0
                               Used             kB     9,778
                               Maximum used     kB    20,280
    Paging memory   Session buffer   kB     1,200
                    Available        kB   262,144
                    in shared memory kB   131,072
                    on disk          kB   131,072
                    Used             kB    13,721
                    Maximum used     kB   262,136
    Extended memory Dialog session   kB 1,953,125
                    Nondialog sess.  kB 1,953,125
                    Available        kB 9,904,128
                    Used             kB 2,801,664
                    Maximum used     kB 5,255,168
    Heap memory     Dialog session   kB 1,953,125
                    Nondialog sess.  kB         0
                    Used             kB         0
                    Maximum used     kB 9,908,208
    b. Current Parameters
    Profile Parameter     Value       Unit Comment
    Roll, extended and heap memory EXTM
    ztta/roll_area                  6500000     Byte
    ztta/roll_first                 1           Byte
    ztta/short_area                 4000000     Byte
    rdisp/ROLL_SHM                  32768       8 kB
    rdisp/PG_SHM                    16384       8 kB
    rdisp/PG_LOCAL                  150         8 kB
    em/initial_size_MB              9676        MB  
    em/blocksize_KB                 4096        kB  
    em/address_space_MB             4096        MB  
    ztta/roll_extension             2000000000  Byte Max.
    abap/heap_area_dia              2000000000  Byte Max.
    abap/heap_area_nondia           0           Byte Max.
    abap/heap_area_total            10146021376 Byte Max.
    abap/heaplimit                  40000000    Byte
    abap/use_paging                 0     
    Edited by: Hasan Bilali on Mar 6, 2012 4:38 PM
    Edited by: Hasan Bilali on Mar 6, 2012 4:41 PM

  • Problem allocating service packages to users via delegated admin

    I've created a custom service package using the sample templates. Upon assigning this newly created package to a user via Delegated Administrator I receive the following message "cannot create user - all service packages of this type have been allocated". Problem is I've made about 200 available and the stats for this package show 0 used. Please advice.
    Cheers

    Please post this question at Developer Forums > E-Mail, Calendar, & Collaboration

  • SAPNOTE for memory parameter ECC 6.0, Windows?

    Hi,
    Can anyone please help by suggesting some SAP notes on memeory management parameters for ECC 6.0 (netweaver 2004s) running on Windows and SQL database?
    Thanks & Regards,
    Sujit.

    Juan,
    Physical memory: 130.937,0 MB
    Current memory: 104.448,0 MB
    Data Cache hit ratio (MB): 93,534%
    Job is running in BTC.
    Roll memory     Dialog session   kB     6.348
                    Nondialog sess.  kB     6.348
                    Available        kB 2.000.000
                    in shared memory kB   262.288
                    on disk          kB 1.737.712
                    Used             kB     4.945
                    Maximum used     kB    25.768
    Paging memory   Session buffer   kB     1.200
                    Available        kB 2.000.000
                    in shared memory kB   131.072
                    on disk          kB 1.868.928
                    Used             kB     3.527
                    Maximum used     kB   150.704
    Extended memory Dialog session   kB 7.812.500
                    Nondialog sess.  kB 7.812.500
                    Available        kB 8.384.512
                    Used             kB   761.856
                    Maximum used     kB 4.542.464
    Heap memory     Dialog session   kB 2.929.688
                    Nondialog sess.  kB 2.929.688
                    Used             kB         0
                    Maximum used     kB 2.929.727
    SWAP is zero in central instance where the job is running. Any other memory parameter if want to know?
    Let me know your suggestion which memory parameter can be incresed?
    And, I will close the prevîous thread.
    Thanks & Regards,
    Sujit.

  • Advice on DSLRs

    Hi,
    I am trying to decide between a Sony Alpha 100 or a Canon Rebel EOS XTI. I am interested in any feedback from this forum on either of these cameras and their compatibility with iMac and iPhoto.
    Sony will have a successor to the Alpha 100, an Alpha 200, available in late February, so I will probably wait. I am leaning towards the Sony due to the Steady Shot image stabilization built into the body of the camera as opposed to needing separate stabilized lenses.
    Thanks
    Mark

    I have never had a problem with my Canon XT and compatibility.
    It may take a while for iPhoto and Aperture to support RAW files from the Sony, support for second tier manufacturer's can tend to lag a bit.
    While IS in the body is nice, it really does need to be tailored to the lens. A long lens needs much more stabilisation compensation than a short lens. There might be a case where the in-body IS does not have sufficient travel to compensate for some long telephoto.
    Remember too, that you are buying into a camera system not just a camera. Canon may provide something that you might need in the future that Sony won't. (For example, a tilt-shift lens, or a selection of prime macros.)

  • RAM consumtion

    Hi,
    I am trying to find out how much RAM my applet will need. My questions are:
    1. What consumes RAM in my applet (apart from transient variables and the stack)?
    2. I can count the transient variables but how do I find out how much RAM for the stack I need?
    3. If I use some operations (like ECC cryptography) which are resource-intensive (i.e. RAM-intensive probably), does this reflect on the stack used or some other RAM that is part of the cryptographic hardware module is used?
    Thank you

    From my experience the APDU buffer, stack and transaction buffer consume pre-allocated RAM. You also have some RAM allocated to the crypto chip and internal OS buffers. The card documentation for you platform should tell you how much RAM is available to user Applets. For example we had a card with 6,000 bytes total RAM with 1,200 available to our applet. You can install an applet does nothing but return the result of JCSystem.getAvailableMemroy() to find out how much you have to start with. If you cannot get the documentation for your card, you can try creating some crypto objects and calling this again to see if your available memory drops as well.
    Since it is best practice to allocate all memory (transient and persistent) in your applet constructor, you should easily be able to find out how much is left. You can also use this to check for memory leaks in your code.
    797894 wrote:
    However, I did find what looks like a memory leak in the JCOP implementation of ECC. If an ECC key object is reassigned to a new ECC key object, the memory from the previous key object is not automatically recovered and available for use as is the case with RSA keys. You have to call the garbage collector to fix this (JCSystem.requestObjectDeletion()).I am not sure if this is a memory leak as such but a side effect of not having a true garbage collector. I guess some implementations are more proactive about internal memory usage than others :) This is why an applet is never truly portable without being completely retested. I also found differences in how transactions are handled from card to card.
    Cheers,
    Shane

  • US Bank mobile deposit

    US Bank has warnings that to do an iphone/photo/mobile deposit of a check, it will be "up to .50 charge". I questioned the gal at my branch and she said yep. I was in disbelief.  I had thus far only deposited in the branch in my grocery store, but today I went to the grocery store and left my check to deposit at home. I thought I'd need to head back, but I decided that even though it pains me greatly, I'd rather pay the .50 than go back to the store/bank. I did it, and I don't think I got charged (they do only make $200 available immediately, but I don't run a lot through the account so I can't fault them for that...luckily that worked ok for my current need). Maybe the charge will show up later when the rest of my deposit is avail? Have others been charged a fee for mobile deposit with US Bank (or any other bank for that matter) in recent times? 

    The $0.50 charge will show up. Always does on mine. Figured I can't drive to the bank for the amount of the charge and the time it takes to drive to the bank. Have another bank that charges $1.00 so it is more than one bank.

  • Future flash

    Do any of you know what the future developments of flash may
    yield... specifically, do you know if it may be possible to record
    webcam, and do other things that would negate the need of flash
    media server. Also anyone have any ideas as to when flash 9 may be
    released?

    There are two kinds of licenses for FMS... but unless you're
    planning on a ninitial investement of $45k or more, you'll only be
    interested in the $4500 pro license.
    Each license may be installed on a single server only. You
    can't install the same license on more than on server (actually you
    can... but it's a violation of the license terms).
    In the FMS configuration files, you define which license
    profile you wan the server to use. The profile you select is
    applied to all of the licenses on that server.
    Let's say you buy 2 licenses and install them both on the
    same server. If you set the config file to use the 100/unlimited
    profile, you'll have 200 available connections and unlimited
    bandwidth on that server. If you choose the 1000/40 profile, you'll
    have 2000 connections or 80mbps of bandwidth (whichever is reached
    first).

  • I wiped my hard drive

    It still says 300 gigs are being used and 200 available. I have a 500 gig hard drive I dont get it. Im on late 2010 imac with mountain lion

    You need to boot the system from a install disc or USB thumb drive of some type and Repartition the drive as one partition.
    To do that on a 2010 Mac you need to use either the original system OS X reinstall discs that came with the system or reinstall Mt Lion and then use the Recovery HD Disc Assistant program to create a USB thumb drive of the Mt Lion Recovery HD and then boot the system from that. Once you have booted the system from some other media, DVD disc or USB thumb drive, other than the internal drive you can then Repartition the internal drive as One Partition. You can not do that booting the system from the built in Recovery HD partition on the internal drive.

  • Why dose my activity monitor say I'm using more in tasks then in total?

    Why dose my activity monitor say I'm using more in tasks then in total?
    see how Guild Wars 2 uses 92.8% yet the total use is 12.03%, 86.54% is idle and the system is using 1.4% why is this?

    Cortess,
    they’re two orthogonal percentage measurements. For the “% CPU” column in Activity Monitor, the total percent available depends upon your hardware: a single-core CPU has 100% available, a dual-core CPU has 200% available, and a quad-core CPU has 400% available. (The column might have been better labeled “% Cores”.) For the System/User/Idle at the bottom of the window, those represent a total of 100% of whatever your hardware comprises. For example, if you have a quad-core CPU, then your total System usage would be 400% of 1.43%, or a total of 5.72% in the “% CPU” column. Similarly, your total User usage would be 400% of 12.03%, or a total of 48.12% in the “% CPU” column. The percentage value for Guild Wars 2  might have been magnified because of its dependence upon your MacBook Pro’s discrete GPU.

Maybe you are looking for

  • How do I allow another user to access my pictures, etc?

    Hi still getting used to the Mac feel, after switching over from Windows, and I have a question that I can't seem to find an answer to. I have the following issue: Under my account, I have all our family photos and documents. I have also set up a use

  • Ora11 Support for SAP R/3 Enterprise 4.7 x110

    Dear Oracle People, in the "Development Update December 2009" there is a u201CBig picture of supported Oracle releases" on p24. In this picture it is described that SAP R/3 Enterprise 4.7 x110 will not be supported under Oracle 11. But SAP R/3 Enterp

  • How to Enable Full Screen Viewing?

    Hi I want to upload flv files to my website. I have got it worling fine - insert media - flv - progressive download - etc. When I view the file in the testing server it does not have the option to "view in full screen" which I need as I want to keep

  • IPhone & Universal Dock - No video out after resume from pause

    OK - original 16GB iPhone, latest universal dock and Apple Composite cable, hooked to a 42" Sony LCD TV. iPhone is at latest revision. Used to be that if I used the remote to pause a video, I could wander off, make a cup of coffee, and when I came ba

  • Master detail view with drill down

    I am trying to develop a simple app for my Ipad. This app is supposed to have a Master/details look and should behave similar to the native Mail app (2x levels of navigation and the last level updates the details view). My problem is that I am not fa